Develop Bugs

[REQ] 1.54.401.10 build.prop

Hey all!
Is there anyone willing to dump his build.prop from the latest 1.54.401.10 who did an full update (so no custom rom one)
with regards,
Hawkysoft

Hawkysoft said:
Hey all!
Is there anyone willing to dump his build.prop from the latest 1.54.401.10 who did an full update (so no custom rom one)
with regards,
Hawkysoft
Click to expand...
Click to collapse
Code:
ro.customer.HTC__J15=PROJECT_G0005_flag, 0x0034
ro.language.HTC__J15=LANGUAGE_ARA_flag, 0x0019
ro.customer.HTC__K18=PROJECT_G0005_flag, 0x0034
ro.language.HTC__K18=LANGUAGE_ISR_flag, 0x0038
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.hsdpa.category=24
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.fast.dormancy.rule=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,23594,27202,27205
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.n-roaming.mcclist=219,204,234,272,222,240,232
ro.ril.show.all.plmn=1
ro.ril.enable.amr.wideband=1
ro.ril.enable.r8fd=1
ro.ril.disable.cpc=1
ro.product.locale.language=en
ro.product.locale.region=US
ro.com.google.clientidbase=android-htc-rev
ro.telephony.default_network=0
ro.ril.vmail.23415=1571,BT,121,VDF UK
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.ril.vmail.65510=100
ro.ril.vmail.22299=4133,3ITA
ro.ril.vmail.23410=901,O2 UK,905,TESCO,443,giffgaff
ro.ril.vmail.22201=41901,I TIM
ro.ril.vmail.22210=42020,Vodafone IT
ro.ril.vmail.22288=4200,I WIND
ro.ril.vmail.20801=888
ro.ril.vmail.20810=123
ro.ril.vmail.20826=777
ro.product.model=HTC One_M8
ro.config.htc.enableCOTA=1
ro.ril.enable.pre_r8fd=1
ro.ril.fd.pre_r8_tout.scr_off=2
ro.ril.fd.pre_r8_tout.scr_on=3
ro.ril.fd.r8_tout.scr_off=2
ro.ril.fd.r8_tout.scr_on=3
ro.ril.ltefgi=1578105984
ro.ril.ltefgi.rel9=2147483648
ro.ril.lte3gpp=35
ro.customer.default=PROJECT_G0005_flag, 0x0034
ro.language.default=LANGUAGE_WWE_flag, 0x0000
ro.ril.enable.enhance.search=1
ro.ril.gsm.amrwb=1
dev.defaultwallpaper=/system/customize/resource/wallpapers_00.jpg
ro.telephony.bl=27202
ro.wifi.sim=1
# begin build properties
htc.build.stage=2
ro.aa.customizationid=802213
ro.aa.project=M8_UL_K44_SENSE60_SECURITY
ro.aa.maincid=HTC__001
ro.prot=true
ro.aa.modelid=0P6B10000
ro.aa.cidlist=HTC__001,HTC__102,HTC__203,HTC__E11,HTC__405,HTC__Y13,HTC__304,HTC__A07,HTC__032,HTC__J15,HTC__016,HTC__M27,HTC__K18,HTC__A48,HTC__002
ro.aa.rid=1453
ro.aa.taskid=377296
ro.aa.report=com
ro.aa.skulist=401
ro.aa.mainsku=401
ro.aa.romver=1.54.401.10
ro.onecid=
ro.cwkey=CWS__001
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H release-keys
ro.build.version.incremental=325784.10
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=二 5月 13 18:52:23 CST 2014
ro.build.date.utc=1399978343
ro.build.type=user
ro.build.user=buildteam
ro.build.host=abm022
ro.build.tags=release-keys
ro.product.brand=htc
ro.product.name=htc_europe
ro.product.device=htc_m8
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=htc_m8
ro.build.description=1.54.401.10 CL325784 release-keys
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.54.401.10 CL325784 release-keys
ro.build.changelist=325784
ro.build.fingerprint=htc/htc_europe/htc_m8:4.4.2/KOT49H/325784.10:user/release-keys
ro.build.characteristics=default
ro.build.project=M8_UL_K44_SENSE60_SECURITY:377296
ro.build.sku=HTC Europe
ro.product.version=1.54.401.10
ro.build.languageremove=0
ro.build.sense.version=6.0
ro.build.version.htcsdk=HTCExt:HTCExtension_Sense60_442_3;SDK:6.17;hdkbase:19.1
ro.build.description=1.54.401.10 CL325784 release-keys
ro.build.fingerprint=htc/htc_europe/htc_m8:4.4.2/KOT49H/325784.10:user/release-keys
keyguard.no_require_sim=1
# end build properties
#
# from device/htc/htc_m8/system.prop
#
#
# system.prop for msm8974
#
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Default network type.
# 9 => GSM/UMTS/LTE mode preferred.
ro.telephony.default_network=9
#
# system props for display
#
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
persist.hwc.mdpcomp.enable=true
ro.hwui.renderer.disable_opaque=true
ro.sf.lcd_density=480
debug.mdpcomp.logs=0
# Display Info
ro.product.display_resolution = 5 inch 1080p resolution
dalvik.vm.heapsize=512m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
# +SSD_RIL
ro.baseband.arch=msm
# +SSD_RIL Enable fill EONS
persist.radio.fill_eons=1
# Enable IMS service by default
persist.radio.jbims=1
# Current VT project need to be added
persist.rmnet.mux=enabled
persist.data.iwlan.enable=true
# -SSD_RIL
ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=true
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
use.voice.path.for.pcm.voip=true
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=3
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
# System props for audio
# System props for soundhound
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
# System prop to select audio resampler quality
af.resampler.quality=4
# System props for global effect
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.global.speaker=1
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=true
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# system property for Bluetooth Hardware information
ro.product.bluetooth=4.0
# config fm rssi threshold
#service.qct.fm.rssi=116
#SSD_BT- bluetooth
# system property for qcom Bluetooth stack
ro.qc.bluetooth.stack=bluedroid
# system property for bdaddr
ro.bt.bdaddr_path = /sys/module/htc_bdaddress/parameters/bdaddress
# BLE TAG (HtcBluetoothLeProfiles)
ro.bt.ble_tag = 1
# System property for cabl
#ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#+ SSD_RIL: disable default value by MASD request
#telephony.lteOnCdmaDevice=1
#- SSD_RIL: disable default value by MASD request
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
# ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure = 10
# ro.storage_encryption_type: define the storage encryption type of this project
# not support encryption: 0x0 block level: 0x1 file level: 0x2
ro.storage_encryption_type = 2
#For usb storage
ro.usb_host = 1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# Following property will be reference by Settings.
ro.product.main_camera =HTC UltraPixel Camera
ro.product.front_camera = 5M
# Support HW rest
ro.product.hwreset = 1
ro.product.hwreset.timer1 = 6
ro.product.hwreset.timer2 = 9
# M8 HW info
ro.product.ram = 2GB
# wifi
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=softap.0
wifi.miracastconcurrent.scan=WCN3680
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
persist.wifi.v6=true
persist.wifi.v6.rs.count=5
persist.wifi.v6.rs.timeout=5
ro.product.wifi = 802.11 a/b/g/n/ac
sys.stt.ssr.no_prompt=1
tunnel.audio.encode = true
# For Embadded DIAG
ro.chipset.vendor=QCT
ro.chipset.model=MSM8974
ro.chipset.version=1.x
# ro.storage_encryption_type: define the storage encryption type of this project
# not support encryption: 0x0 block level: 0x1 file level: 0x2
ro.storage_encryption_type = 2
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.preload.common=1
persist.zygote.preload_threads=3
persist.camera.antibanding=50
persist.camera.tuning_spec=htc
ro.com.android.dataroaming=false
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4.2_r1
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1

Thanks mate
Sent from my HTC One_M8 using XDA Premium 4 mobile app

[STOCK ROM][FTF] Xperia T3 (D5103) 18.1.A.1.14 3 SE

Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If It Helps You

@Ben Ling Can u please upload kernel.sin from it? Mega seems down and I'll have to download whole of the ftf just for the kernel
Cheers,
AJ

Abhinav2 said:
@Ben Ling Can u please upload kernel.sin from it? Mega seems down and I'll have to download whole of the ftf just for the kernel
Cheers,
AJ
Click to expand...
Click to collapse
okay sure
there you go...
http://d-h.st/z20

Ben Ling said:
okay sure
there you go...
http://d-h.st/z20
Click to expand...
Click to collapse
Thanks BTW u own the device
EDIT: or know someone who does? @Ben Ling
Cheers,
AJ

Abhinav2 said:
Thanks BTW u own the device or no someone who does?
Cheers,
AJ
Click to expand...
Click to collapse
I didn't own it,I only have the Xperia Z...

Ben,
thank you very much for posting this .ftf for us!
I own a T3 and unlocked the bootloader however once I did it, the phone entered boot loop. After trying to flash a different kernel it doesn't leave the SONY screen at all. I tried using the flashtool by Androxyde but I always get "cannot open bundle error". Below are the messages I always get:
0/056/2014 17:56:14 - INFO - Selected Bundle for D5103. FW release : 18.1.A.1.14. Customization : 3 [email protected]
20/056/2014 17:56:14 - INFO - Preparing files for flashing
20/057/2014 17:57:24 - ERROR - .\firmwares\prepared\elabel-D5103-row_201406131600.1_18.1.A.1.14.sin (Acess denied)
20/057/2014 17:57:24 - INFO - Cannot open bundle. Flash operation canceled
Once I connect the phone to the USB while pushing the volume down button flashtool quickly recognizes it's in flashmode but then it appears to have lost the connection.
How can I successfully return my phone to factory status?
Thanks for your help!
JZ
---------- Post added at 08:00 PM ---------- Previous post was at 07:18 PM ----------
Ok, I passed the "access denied error". For some reason even though I was running flashtool as root the application wasn't being able to create the files on its directory. I transferred all files to my user folder and flashtool prepared the files correctly. Now I have a working phone again! I wish I was able to remove the branding though.
Best Regads,
JZ
jzeuro2 said:
Ben,
thank you very much for posting this .ftf for us!
I own a T3 and unlocked the bootloader however once I did it, the phone entered boot loop. After trying to flash a different kernel it doesn't leave the SONY screen at all. I tried using the flashtool by Androxyde but I always get "cannot open bundle error". Below are the messages I always get:
0/056/2014 17:56:14 - INFO - Selected Bundle for D5103. FW release : 18.1.A.1.14. Customization : 3 [email protected]
20/056/2014 17:56:14 - INFO - Preparing files for flashing
20/057/2014 17:57:24 - ERROR - .\firmwares\prepared\elabel-D5103-row_201406131600.1_18.1.A.1.14.sin (Acess denied)
20/057/2014 17:57:24 - INFO - Cannot open bundle. Flash operation canceled
Once I connect the phone to the USB while pushing the volume down button flashtool quickly recognizes it's in flashmode but then it appears to have lost the connection.
How can I successfully return my phone to factory status?
Thanks for your help!
JZ
Click to expand...
Click to collapse

Ben Ling said:
Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
If It Helps You
Click to expand...
Click to collapse
Can you make a zip file of System? @Ben Ling

Bro can u port cyanogenmod rom for t3 d5102
Ben Ling said:
Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
If It Helps You
Click to expand...
Click to collapse
Bro can u port CM rom for T3 D5102 (Indian Version) or a stock android 4.4.4 , will be very helpful for us:good::good::good::good::good:

[Q] E980 kitkat default build prop

Looking for the default build prop for the e980 on stock kitkat. Any help would be great.

# begin build properties # autogenerated by buildinfo.sh ro.build.id=KOT49I.E98020g ro.build.display.id=KOT49I.E98020g ro.build.version.incremental=E98020g.1398671324 ro.build.version.sdk=19 ro.build.version.codename=REL ro.build.version.release=4.4.2 ro.build.date=Mon Apr 28 16:53:46 KST 2014 ro.build.date.utc=1398671626 ro.build.type=user ro.build.user=hyunjin0828.hwang ro.build.host=betaserver-desktop ro.build.tags=release-keys ro.product.model=LG-E980 ro.product.brand=lge ro.product.name=geefhd_att_us ro.product.device=geefhd ro.product.board=GKATT ro.product.cpu.abi=armeabi-v7a ro.product.cpu.abi2=armeabi ro.product.manufacturer=LGE ro.product.locale.language=en ro.product.locale.region=US ro.wifi.channels=11 11 ro.board.platform=msm8960 # ro.build.product is obsolete; use ro.product.device ro.build.product=geefhd # Do not try to parse ro.build.description or .fingerprint ro.build.description=geefhd_att_us-user 4.4.2 KOT49I.E98020g E98020g.1398671324 release-keys ro.build.fingerprint=lge/geefhd_att_us/geefhd:4.4.2/KOT49I.E98020g/E98020g.1398671324:user/release-keys ro.build.characteristics=default # end build properties # # from device/lge/geefhd/system.prop # ################################################################ # COMMON system property for this device (geefhd). # operator-specific property MUST NOT be here. ################################################################ # # system.prop for surf # rild.libpath=/system/lib/libril-qc-qmi-1.so rild.libargs=-d /dev/smd0 persist.rild.nitz_plmn= persist.rild.nitz_long_ons_0= persist.rild.nitz_long_ons_1= persist.rild.nitz_long_ons_2= persist.rild.nitz_long_ons_3= persist.rild.nitz_short_ons_0= persist.rild.nitz_short_ons_1= persist.rild.nitz_short_ons_2= persist.rild.nitz_short_ons_3= ril.subscription.types=NV,RUIM DEVICE_PROVISIONED=1 debug.sf.hw=1 debug.egl.hw=1 debug.composition.type=dyn dalvik.vm.heapsize=36m debug.enable.wl_log=1 # 3 layer bypass applied, 2013.01.07 debug.mdpcomp.logs=0 persist.hwc.mdpcomp.enable=true # 2013-02-02 [GK] default_Web_Browser_set [email protected] persist.web.set=1 # LGE_CHANGE_END # # [GK/G/GV] system Prop for add_power_save in KOR(SKT/KT) added by [email protected], 20140113 # persist.radio.add_power_save=1 # # system props for the cne module # persist.cne.feature=1 ro.hdmi.enable=true lpa.decode=true tunnel.decode=false tunnel.audiovideo.decode=false lpa.use-stagefright=true qcom.hw.aac.encoder=true #system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-fma2dp=true media.stagefright.enable-scan=true mmp.enable.3g2=true # Add MOV container feature [[email protected]] mmp.enable.mov=true media.aac_51_output_enabled=true #33395 is sum of supported format flags in AAL #Formats: AVI AC3 ASF AAC QCP DTS 3G2 mm.enable.qcom_parser=33395 # # system props for the data modules # ro.use_data_netmgrd=true #2013-08-31 [email protected] LGP_DATA_TEMPORARY_PATCH_FOR_KK_APP_TEST[START] #persist.data.netmgrd.qos.enable=true persist.data.netmgrd.qos.enable=false #2013-08-31 [email protected] LGP_DATA_TEMPORARY_PATCH_FOR_KK_APP_TEST[END] #system props for time-services persist.timed.enable=true # System props for audio persist.audio.fluence.mode=endfire persist.audio.vr.enable=false persist.audio.handset.mic=digital persist.audio.lowlatency.rec=false # System prop to select audio resampler quality af.resampler.quality=255 # System prop to select MPQAudioPlayer by default on mpq8064 #mpq.audio.decode=true # # system prop for opengles version # # 196608 is decimal for 0x30000 to report version 3 ro.opengles.version=196608 # system prop for requesting Master role in incoming Bluetooth connection. # ro.bluetooth.request.master=true # # system prop for Bluetooth Auto connect for remote initated connections # ro.bluetooth.remote.autoconnect=true # system property for Bluetooth discoverability time out in seconds # 0: Always discoverable #debug.bt.discoverable_time=0 # System prop to disable a2dp sink which is enabled by default bluetooth.a2dp.sink.enabled=false #system prop for switching gps driver to qmi persist.gps.qmienabled=true # System property for cabl #LGE_CHANGE_S [email protected] 2012.1.4 CABL off ro.qualcomm.cabl=2 #LGE_CHANGE_E [email protected] 2012.1.4 CABL off # System props for telephony # System prop to turn on CdmaLTEPhone always telephony.lteOnCdmaDevice=1 # # System prop for sending transmit power request to RIL during WiFi hotspot on/off # ro.ril.transmitpower=true # #Simulate sdcard on /data/media # # LGE_CHANGE_S # If you use Internal-SD with FUSE, comment-out below # 2012-01-08 [email protected] #persist.fuse_sdcard=false # LGE_CHANGE_E ro.hwui.text_cache_width=2048 # # Supports warmboot capabilities # ro.warmboot.capability=1 # #snapdragon value add features # ro.qc.sdk.audio.ssr=false ro.qc.sdk.camera.facialproc=true ro.qc.sdk.gestures.camera=false # LGE_CHANGE_S [email protected] 2012.4.22 LGE sound profile scenario. ro.lge.audio_soundprofile=true # LGE_CHANGE_E [email protected] 2012.4.22 LGE sound profile scenario. #LGBT_COMMON_SCENARIO supported Bluetooth PAN profile 2012-05-22 ro.bluetooth.PANenable = 1 #LGBT_COMMON_SCENARIO # System prop for sensor ro.qc.sdk.sensors.gestures=true # LGE_CHANGE_S 2012-12-11, [email protected], HDMI block sys.hdmi.block=unblock # LGE_CHANGE_E 2012-12-11, [email protected], HDMI block #hwui properties ro.hwui.texture_cache_size=72 #property to check if dynamic resolution change is supported in framework ro.streaming.video.drs=true #property to enable user to access Google WFD settings. persist.debug.wfd.enable=1 #property to choose between virtual/external wfd display persist.sys.wfd.virtual=0 #system prop for setting rmnet mux mode persist.rmnet.mux=disabled # LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up # reserved wifi related property dhcp.ap.macaddress= dhcp.wlan0.dns1= dhcp.wlan0.dns2= dhcp.wlan0.dns3= dhcp.wlan0.dns4= dhcp.wlan0.gateway= dhcp.wlan0.ipaddress= dhcp.wlan0.leasetime= dhcp.wlan0.mask= dhcp.wlan0.pid= dhcp.wlan0.reason= dhcp.wlan0.result= dhcp.wlan0.server= dhcp.wlan0.vendorInfo= dhcp.p2p.dns1= dhcp.p2p.dns2= dhcp.p2p.dns3= dhcp.p2p.dns4= dhcp.p2p.gateway= dhcp.p2p.ipaddress= dhcp.p2p.leasetime= dhcp.p2p.mask= dhcp.p2p.pid= dhcp.p2p.reason= dhcp.p2p.result= dhcp.p2p.server= dhcp.p2p.vendorInfo= init.svc.dhcpcd_wlan0= init.svc.dhcpcd_p2p= init.svc.p2p_supplicant= init.svc.iprenew_wlan0= net.dns1= net.dns2= net.dnschange= net.p2p-p2p0-0.dns1= net.p2p-p2p0-0.dns2= net.wlan0.dns1= net.wlan0.dns2= wlan.driver.status= persist.sys.security= persist.sys.hotssid.ksc5601= wifi.lge.autochannel= # LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up #// LGE_CHANGE_S, [Net_Patch_0300][CALL_FRW][COMMON], 2012-05-25, Airplane Mode Pop-Up display property value { ro.airplane.phoneapp=1 #// LGE_CHANGE_E, [Net_Patch_0300][CALL_FRW][COMMON], 2012-05-25, Airplane Mode Pop-Up display property value } #disable gapless mode by default audio.gapless.playback.disable=true # LGE_CHANGE_S [gk][framework][common] the screen auto-brightness adjustment setting persist.power.useautobrightadj=true # LGE_CHANGE_E [gk][framework][common] the screen auto-brightness adjustment setting # # ADDITIONAL_BUILD_PROPERTIES # ro.build.target_operator=ATT ro.build.target_country=US persist.gsm.sms.disablelog=64 ro.lge.swversion=E98020g ro.lge.factoryversion=LGE980AT-00-V20g-ATT-US-APR-28-2014+0 ro.config.ringtone=ATT_Firefly.ogg ro.com.android.dateformat=MM-dd-yyyy ro.config.notification_sound=Optimus.ogg ro.config.alarm_alert=Lifes_Good_Alarm.ogg ro.com.android.dataroaming=false ro.com.google.clientidbase=android-om-lge ro.com.google.clientidbase.ms=android-att-us ro.com.google.clientidbase.am=android-att-us ro.com.google.clientidbase.gmm=android-om-lge ro.com.google.clientidbase.yt=android-om-lge uicc.mobile_equipment.config=0 ro.afwdata.LGfeatureset=ATTBASE ro.radio.ratdisplay=true ro.qc.sdk.audio.fluencetype=fluence persist.data_netmgrd_mtu=1410 persist.audio.btsco.wb=false persist.radio.apm_sim_not_pwdn=1 wlan.lge.supportsimaka=yes wifi.lge.hanglessid=false wifi.lge.supportp2p5g=gconly keyguard.no_require_sim=true ro.radio.networkmode=disable ro.radio.topreviousmode=disable ro.radio.check_csp=enable persist.service.ecc.hiddenmenu= ro.monkey=0 ime_onehand_keyboard=true ime_split_keyboard=true ime_onehand_keyboard_percent=82 ime_split_keyboard_width_dp=702 ime_keyboard_layout=ko=QWERTY ime_extend_row_keyboard=true ime_theme=true ro.sdcrypto.syscall=378 ro.config.vibrate_type=1 lge.hw.frontkeyled=true telephony.lteOnCdmaDevice=0 ro.hwui.layer_cache_size=48 ro.hwui.r_buffer_cache_size=8 ro.hwui.path_cache_size=32 ro.hwui.gradient_cache_size=1 ro.hwui.drop_shadow_cache_size=6 ro.hwui.texture_cache_flushrate=0.4 ro.hwui.text_small_cache_width=1024 ro.hwui.text_small_cache_height=1024 ro.hwui.text_large_cache_width=2048 ro.hwui.text_large_cache_height=1024 lge.normalizer.param=version2.0/true/6.0/true/7000/1.0/4000/0.33 persist.sys.language=en persist.sys.country=US ro.telephony.default_network=9 ro.sf.lcd_density=480 ro.sf.lcd_density_secondary=400 dalvik.vm.heapstartsize=8m dalvik.vm.heapgrowthlimit=128m dalvik.vm.heapsize=256m dalvik.vm.heaputilization=0.25 dalvik.vm.heapidealfree=8388608 dalvik.vm.heapconcurrentstart=2097152 ro.lge.overlay=true wlan.chip.vendor=brcm wlan.chip.version=bcm4334 wifi.lge.patch=true dhcp.dlna.using=false wifi.lge.sleeppolicy=0 wifi.lge.offdelay=false wlan.lge.concurrency=MCC wlan.lge.wifidisplay=both ro.lge.vib_magnitude_index=0,20,40,60,80,100,120,127 persist.sys.strictmode.disable=true wlan.driver.ath=0 wlan.driver.config=/data/misc/wifi/WCNSS_qcom_cfg.ini qcom.audio.init=complete lpa.decode=true persist.sys.ats_start=false persist.sys.strictmode.visual=false lgemm.player.use_android_origin=false ro.lge.audio_scenario=SOUNDEXCEPTION ro.lge.audio_soundexception=true ro.config.vc_call_vol_steps=6 ro.config.vc_call_vol_default=3 ro.airplane.phoneapp=1 ro.lge.basebandversion=APQ8064/MDM9x15M lge.version.verified=NONE persist.service.main.enable=0 persist.service.system.enable=0 persist.service.radio.enable=0 persist.service.events.enable=0 persist.service.kernel.enable=0 persist.service.packet.enable=0 persist.service.crash.enable=0 persist.sys.ssr.restart_level=3 lge.signed_image=true persist.radio.data_no_toggle=1 persist.lg.d

ST LITE, play store problems.

Hello everyone
I'm using ST LITE rom, and I find it very good. I had some problems (yes, because the developer has removed so much things IMHO). The most important:
in google play store i can't download apps like "clash of clanes" or "instagram" or... because they aren't compatible. I think there is an error in the build.prop (i've solved two problems editing its, so i think the problem is there!).
thanks!
Stefano.

##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Wed Mar 11 13:02:23 2015
ro.build.date.utc=1426075343
ro.build.user=BuildUser
ro.build.host=BuildHost
##### Final patch of properties #####
ro.build.product=D5503
ro.build.description=D5503-user 5.0.2 14.5.A.0.242 2953600412 release-keys
ro.product.brand=Sony
ro.product.name=D5503
ro.product.device=D5503
ro.build.version.incremental=2953600412
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5503/D5503:5.0.2/14.5.A.0.242/2953600412:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1276-7948
ro.semc.version.cust_revision=R5D
ro.somc.customerid=104
#############################################################################
############## Product Property Values ##############
ro.setupwizard.mode=DISABLED
#####################################################
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.semc.content.number=PA40
################# Updating of the SW Version #################
ro.semc.version.fs_revision=14.5.A.0.242
ro.build.id=14.5.A.0.242
ro.build.display.id=14.5.A.0.242
##### Values from product package metadata #####
ro.semc.product.model=D5503
ro.semc.ms_type_id=PM-0450-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia Z1
ro.semc.product.device=D55
ro.product.model=D5503
# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.sdk=21
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.2
ro.build.type=user
ro.product.board=MSM8974
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse description, fingerprint, or thumbprint
ro.build.characteristics=default
# end build properties
#
# from device/qcom/msm8974/system.prop
#
#
# system.prop for msm8974
#
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.4k2kSplit=1
debug.mdpcomp.logs=0
debug.mdpcomp.4k2kSplit=true
sys.hwc.mdp_downscale_enabled=true
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.multiple=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=false
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
hw.cabl.level=Auto
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
#
# System props for bluetooth
# System prop to turn on hfp client
#bluetooth.hfp.client=1
#
# System props for bluetooth LE Always on feature
#
ro.bluetooth.alwaysbleon=true
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = false
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Disable offload audio video playback by default
av.offload.enable=false
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#disable dsp gapless mode by default
audio.offload.gapless.enabled=false
#
# from device/somc/rhine/system.prop
#
#
# platform specific part of system.prop
#
# aDSP sensors
## max rate
ro.qti.sensors.max_accel_rate=false
ro.qti.sensors.max_gyro_rate=false
ro.qti.sensors.max_mag_rate=false
ro.qti.sensors.max_geomag_rotv=50
## sensor type
ro.qti.sdk.sensors.gestures=false
ro.qti.sensors.pedometer=false
ro.qti.sensors.step_detector=true
ro.qti.sensors.step_counter=true
ro.qti.sensors.pam=false
ro.qti.sensors.scrn_ortn=false
ro.qti.sensors.smd=true
ro.qti.sensors.game_rv=true
ro.qti.sensors.georv=true
ro.qti.sensors.cmc=false
ro.qti.sensors.bte=false
ro.qti.sensors.fns=false
ro.qti.sensors.qmd=false
ro.qti.sensors.amd=false
ro.qti.sensors.rmd=false
ro.qti.sensors.vmd=false
ro.qti.sensors.gtap=false
ro.qti.sensors.tap=false
ro.qti.sensors.facing=false
ro.qti.sensors.tilt=false
ro.qti.sensors.tilt_detector=true
ro.qti.sensors.dpc=false
ro.qti.sensors.wu=false
#System prop for gralloc
persist.gralloc.cp.level3=1
#System props for audio
persist.audio.hp=true
#System props for the MM Audio
media.aac_51_output_enabled=true
# system property for somc thermal solution
ro.somc.thermal=system_monitor
# Enables two core touch boost
sys.somc.touch_perf_kick=1
#System props for the MM modules
encoder.video.profile=high
# Audio recording
ro.mm.aud.rec.rampstart=500000
ro.mm.aud.rec.rampduration=600000
# Video recording
ro.mm.vid.rec.av.latency.def=-10
ro.mm.vid.rec.av.latency.4k=85
# System props for telephony
# Default values/Locales for the hiding languages feature
ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL
# Modem power save enabled
persist.radio.add_power_save=1
# Limit Modem signaling to save power
persist.radio.data_no_toggle=1
# Log slow sqlite queries (if ro.debuggable is true):
db.log.slow_query_threshold=100
# Temporarly disable sending SMS notifications about crashes
persist.sys.crashmon.stop.sms=1
# Snapdragon
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
debug.performance.tuning=1
ro.lge.proximity.delay=15
persist.service.adb.enable=1
# Activate USB OTG
persist.sys.isUsbOtgEnabled=1
# SONY_EFFECT_SUPPORTED_EFFECT
# appoint a logical sum of Effect supporting
# DN 0x0001 (support)
# S-Force 0x0002 (support)
# ClearPhaseHP 0x0004 (support)
# ClearAudio 0x0008 (support)
# VPT 0x0010 (support)
# ClearPhaseSP 0x0020 (support)
# xLOUD 0x0040 (support)
# ClearAudio+ 0x0080 (support)
# SpeakerBundle 0x0100 (support)
sony.support.effect=0x1FD
# Added system property for DSEE HX mode
ro.somc.dseehx.supported=true
#
# from device/somc/honami/system.prop
#
#
# product specific part of system.prop
#
ro.usb.pid_suffix=19E
# NFC
ro.nfc.on.default=false
ro.nfc.se.sim.enable=true
ro.nfc.se.smx.enable=true
ro.nfc.icon.enable=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes/SemcGenericUxpRes.apk
ro.com.android.dataroaming=false
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
ro.com.google.gmsversion=5.0_r2
camera.disable_zsl_mode=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.sf.lcd_density=320
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.r_buffer_cache_size=4
ro.hwui.path_cache_size=24
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=5
ro.hwui.texture_cache_flushrate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.features=div
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.pip.gated=0
ro.service.xrfm.supported=true
persist.service.xrfm.mode=1
ro.sony.irremote.protocol_type=2
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported

build.prop from unlocked phone running newest fireOS, please?

Screwed up my build.prop and lost my backup. Can someone post a copy here if an unmodified one? Please??

From "35.4.6.3_463001620" unlocked GSM version.
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KTU84P
ro.build.display.id=KTU84P test-keys
ro.build.version.incremental=35.4.6.3_user_463001620
ro.build.version.number=463001620
ro.build.version.name=Fire OS 4.6.3 (463001620)
ro.build.version.fireos=4.6.3
ro.build.version.fireos.sdk=3
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.4
ro.build.date=Sun Aug 16 02:25:38 UTC 2015
ro.build.date.utc=1439691938
ro.build.type=user
ro.build.lab126.sign.type=release
ro.build.user=build
ro.build.host=ip-10-11-19-6
ro.build.tags=release-keys
ro.build.platform.version=
ro.product.model=SD4930UR
ro.product.brand=Amazon
ro.product.name=juniper
ro.product.device=kodiak
ro.product.board=ursa
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Amazon
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=juniper
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=juniper-user 4.4.4 KTU84P 35.4.6.3_user_463001620 release-keys
ro.build.fingerprint=Amazon/juniper/kodiak:4.4.4/KTU84P/35.4.6.3_user_463001620:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# from device/amazon/kodiak/system.prop
#
#
# system.prop for msm8974
#
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in global mode
ro.telephony.default_network=9
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=false
#
# system props for the cne module
#
#persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
#media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=false
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# Content Adaptive Backlight
#
# Adjusts screen RGB value brightness up and decreases
# backlight PWM duty cycle correspondingly to save power
#
# Disabled by default, enabled automatically for video
# playback in AIV
ro.qualcomm.cabl=1
ro.amazon.dynamiccabl=true
# Assertive Display
#
# Increases screen RGB brightness and contrast in an
# HDR-like manner to improve readability and ease of
# viewing in direct sunlight. Should not have any
# noticeable effect indoors. Not designed to impact
# power consumption positively or negatively
ro.qcom.ad=1
ro.qcom.ad.calib.data=/system/etc/ad_calib.cfg
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
#
# System props for bluetooth
# System prop to turn on hfp client
bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Enable offload audio video playback by default
av.offload.enable=true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
#disable dsp gapless mode by default
audio.offload.gapless.enabled=false
#USB VID/PID for Duke
ro.usb.vid=1949
ro.usb.pid=0800
# Dolby DMID
dmid=1932882026
dolby.ds.platform=qcom
#enable property for pcm offload
audio.offload.pcm.enable=true
#enable property for ds2
audio.dolby.ds2.enabled=true
# acdb path
persist.audio.calfile0=/etc/acdbdata/DUKE/Bluetooth_cal.acdb
persist.audio.calfile1=/etc/acdbdata/DUKE/General_cal.acdb
persist.audio.calfile2=/etc/acdbdata/DUKE/Global_cal.acdb
persist.audio.calfile3=/etc/acdbdata/DUKE/Handset_cal.acdb
persist.audio.calfile4=/etc/acdbdata/DUKE/Hdmi_cal.acdb
persist.audio.calfile5=/etc/acdbdata/DUKE/Headset_cal.acdb
persist.audio.calfile6=/etc/acdbdata/DUKE/Speaker_cal.acdb
persist.en.orientation_on_lock=false
# no boot animation noise
persist.sys.silent=1
persist.audio.fluence.voicecall=true
use.voice.path.for.pcm.voip=true
# Don't let ALS auto-brightness dim the screen
persist.power.usenodarkening=true
# ACOS_MOD_BEGIN {DirectTexture}
com.msm_enhancement=true
# ACOS_MOD_END {DirectTexture}
# ACOS_MOD_BEGIN {LowLatencyAnimation}
com.amazon.lla_enabled=false
# ACOS_MOD_END {LowLatencyAnimation}
# ACOS_MOD_BEGIN {amazon_telephony}
persist.radio.oem_socket=false
# ACOS_MOD_END {amazon_telephony}
# custom audio
media.audio.ui.video_record_s=/system/media/audio/ui/camera_videostart.ogg
media.audio.ui.video_record_e=/system/media/audio/ui/camera_videostop.ogg
media.audio.ui.camera_click=/system/media/audio/ui/camera_shutter.ogg
# maximum backup size for factory reset whitelist in kB
ro.recovery.wl.maxstore=1048576
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.usb.config=mtp
persist.sys.recovery.batt_level=25
persist.sys.ota.verified=unverified
persist.sys.last_verified_build=none
ro.com.android.dataroaming=false
ro.config.notification_sound=system_notifications_09.ogg
ro.config.alarm_alert=system_alarms_comp_01.ogg
ro.config.ringtone=system_ringtones_comp_02.ogg
persist.sys.timezone=America/Los_Angeles
ro.sf.lcd_density=320
ro.build.version.lab126.modem=PB_02_06_12
ro.build.version.qcom=M8974AAAAANLYD1224
ro.build.version.qcom.sbl1=M8974AAAAANAZB200890.1
ro.build.version.qcom.adsp=M8974AAAAAAAZL2031050.1
ro.build.version.qcom.tz=M8974AAAAANAZT203020.1
ro.build.version.qcom.rpm=RPM.BF.1.0.c5-00001-M8974AAAAANAZR-1
ro.build.version.qcom.sdi=SDI.BF.1.0-00045-M8974AAAAANAZI-3
ro.build.version.qcom.wcnss=WCNSS.PR.1.4-0039308-M8974AAAAANAZW-1
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.build.lab126.buildtype=Nightly
ro.build.lab126.project=juniper_ship_463_kitkat
ro.build.lab126.build=16
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
drm.service.enabled=true
ro.com.widevine.cachesize=16777216
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x1
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1

Yesssss worked perfect!
Thanks!
Sent from my SD4930UR using XDA Free mobile app