Related
DISCLAIMER: I'm not responsible in any case if using this firmware will damage your Tab.
This kernel works only with Euro roms and Gingerbread systems.
CHANGE LOGS ON 2ND POST
Kernel description:
- Based on Overcome v4.0 Kernel thanks Alterbridge86, plus a couple of features:
- Tiny-shmem , thanks to Ronis_BR
- Lagfree and Smoothass Governors , thanks to Ronis_BR
- CWM 3.0.0.5 (oldest, but i was not able to use Overcome one, Rom didn't boot)
- Thanks to Koxudaxi for his initramfs and various patches already included in Overcome kernel.
- Thanks to stratosk for his help and semaphore kernel tips.
- Thanks to HM.carbide for his cache fix app.
- Thanks to LIPPOL94 for kernel cleanin script
- Thanks to CarpeNoctem for testing
-Thanks to kaiser_tytnii for testing
- LCD and RAM Voltage are not undervolted, stock Samsung, my personal choice.
- Thanks to Dizgustipated for some of new Governors.
Installation:
This kernel doesn't include Voodoo lagfix, basically it doesn't convert your partitions into EXT4 but it does include EXT4 drivers.
If you come from an Overcome kernel then just flash the .zip via CWM and reboot, your system was already been converted from Overcome kernel.
If you come from a stock kernel then your system it is rfs and will be not touched.
Download:
AF974-KERNEL-P1000- V.3.0
Old Releases:
AF974-Kernel-P1000-v1.0
AF974-Kernel-P1000-v1.0.tar
You will not find a donate button ever cause i do this for fun and to give people who use the same phone as me more selection, just hit the thanks button and leave feedback.
GPL compliance:
In above kernel description if you will click on every name posted you will find every patch that i used here, i did not change anything else so i don't need to post any Github link in compliance with GPL and XDA rules.
Source for new governors:
Governors-source-V3.0
18-Nov-2011 V.2.0:
Add new Governors:
brazilianwax
savagedzen
interactivex
lulzactive
minmax
lagfree
smoothass
smartassv2
++Semaphore scripts to change virtual Cache to 50 Mb and other scripts.
++Initramfs from JQ4
++Some fix
This link is broken in the tab...
Thanks
Sent from my GT-P1000 using xda premium
In thirst installation there was a failure in connecting to the wifi, after a reboot the problem as gone..
Running smooth until this time.
Need more time to test it... Thanks
Sent from my GT-P1000 using xda premium
Nice, thanks for feedback.
To be honest iirc i don't remember if i had a wi-fi problem at first installation, anyway let me know if problems will occur.
I'm particular interested how do you feel with battery life in addiction to new governors, i feel good with lagfree right now and i'm loosing 2% overnight.
nscosta said:
In thirst installation there was a failure in connecting to the wifi, after a reboot the problem as gone..
Running smooth until this time.
Need more time to test it... Thanks
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
The wifi problem is still there, after two hours offline I connect to wifi and I had to reboot again.
About battery I will use now use lagfree to see any changes... I was using on demand and I saw no difference...
Will see...
Thanks
Sent from my GT-P1000 using xda premium
Good work!! Unfortunately, I can't test your kernel since I have a P1000L tab...
Just one question, you said that you choose to avoid RAM and LCD undervoltage. Can you tell me why? I have been using aggressive undervoltage settings for LCD (2.1V) and I haven't noticed anything until now. No glitches, no weird things. But I know that this can change between devices. Do you know if anyone has had any kind of problems with undervoltage?
Thanks!
Ronan
Ronan, good work to you since i've only applied your patches Thanks.
About RAm and LCD undervolting i've always had some doubt about the real gain in battery save and after seeing this post from Technomancer i've decided to give it a try.
Till now my battery last even better than before, don't know, it could be a placebo effect though
Too bad that i have only one feedback till now that i have 45 downloads
Ronis_BR said:
Good work!! Unfortunately, I can't test your kernel since I have a P1000L tab...
Just one question, you said that you choose to avoid RAM and LCD undervoltage. Can you tell me why? I have been using aggressive undervoltage settings for LCD (2.1V) and I haven't noticed anything until now. No glitches, no weird things. But I know that this can change between devices. Do you know if anyone has had any kind of problems with undervoltage?
Thanks!
Ronan
Click to expand...
Click to collapse
I'm just went to home and activated my wi-fi without issue but maybe it is because i've made a clean rom/kernel installation yesterday.
Give a try to reboot into CWM and clean CACHE and see if it work.
nscosta said:
The wifi problem is still there, after two hours offline I connect to wifi and I had to reboot again.
About battery I will use now use lagfree to see any changes... I was using on demand and I saw no difference...
Will see...
Thanks
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
I tried to connect to gps and gave error. The same with maps and ndrive...
The wifi problem didn't despear with cache cleanup.
Thanks
Sent from my GT-P1000 using xda premium
Lol i'm starting to have doubt that you have an euro tab . . . . Jk.
Anyway, are you using it with my rom or another?
I suggest you to stay with overcome kernel ( and rom if you have it) and maybe try again it once you will do a future wipe for a future rom.
I know, i can be boring but i do not have all these problems.
Thanks.
nscosta said:
I tried to connect to gps and gave error. The same with maps and ndrive...
The wifi problem didn't despear with cache cleanup.
Thanks
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
I have your rom (full wipe) , I already moved to overcome kernel(no problems). So the problem isn't my tab
Sent from my GT-P1000 using xda premium
Add kernel in .tar format for flashing with Odin.
I downloaded it but I didnt update because some feedbacks seem bad with wifi.
However today I update it.
Very well.
Updated, I copy file "wpa_supplicant" to replace original file and my wifi is alright.
Thank you!
Sorry for my english so bad.
Thanks for feedback,
however, can you tell me from which rom version did you replace wifi_supplicant?
Thanks.
maihuuquan said:
I downloaded it but I didnt update because some feedbacks seem bad with wifi.
However today I update it.
Very well.
Updated, I copy file "wpa_supplicant" to replace original file and my wifi is alright.
Thank you!
Sorry for my english so bad.
Click to expand...
Click to collapse
I use your rom v1.3
Oh Nice!! No random reboots so far with my rom?
maihuuquan said:
I use your rom
Click to expand...
Click to collapse
Only one time my tab reboot.
But I dont think its problem.
Just only one time.
But cannot use 3G
Thanks for the kernel, I can tell it is a definite improvement over the overcome. However, the old fix for market download cache in the init. D folder does not work anymore. Could you help look into it please ?
Sent from my GT-P1000 using XDA App
Please, post here a link to the fix so i will look into it.Thanks.
kaiser_tytnii said:
Thanks for the kernel, I can tell it is a definite improvement over the overcome. However, the old fix for market download cache in the init. D folder does not work anymore. Could you help look into it please ?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Introducing Trickster MOD, bringing Trickster experience to virtually every ROM out there.
Users using Trickster ROM 1.2.1 or newer can use this MOD to update
This CWM zip include the binaries and scripts I used for optimization in Trickster ROM. What it can do/set:
- Zipalign and sqlite DB optimization at boot
- Some android properties tweaks with mobile network speed tweak
- Screen state optimization for kernel task scheduler and virtual memory management (ch33kybutt)
- Set I/O scheduler, read ahead buffer, CPU scaling governor, min and max CPU speed
Following features are dependent on kernel features:
- Color (applied by default), contrast and gamma tweaks
- Generic hotplug
- CPU Temp limit
- Minimal SmartReflex voltage of Core, IVA, and MPU domains
- Nominal SmartReflex voltage for Core, IVA, and MPU domains
- Regulator voltages
- GLaDOS live OC of Core, GPU and MPU
- WIFI mode for screen off (power saving or full speed)
- Vibrator strength
- Headset volume boost
- High performance sound
- Force fast charge
- Battery live extender
- Touch wake and touch wake duration
- fsync control
Download
Trickster MOD 20120709
Control App
Changelogs
Requirements:
- CWM
- Someone who understands instructions below
Installation/Update instructions:
- Reboot to CWM recovery
- Do a nandroid if you're scared (recommended in case you have problem)
- Install zip from sdcard
- Reboot the phone
- If you see /sdcard/trickster directory with configuration files inside then this mod installed successfully
Usage:
By default Trickster color, some android property regarding UI smoothness and mobile data speed tweaks and screen state optimization are applied. If you want to change additional settings then either use the app or :
- Go to /sdcard/trickster directory, you'll see at most four following configuration files, depending on kernel features:
. color.conf: color related tweak
. general.conf: generic tweaks like zipalign, sqlite, and screenstate optimization
. kern_general.conf: generic kernel tweaks like CPU speed, governor, IO scheduler and readahead buffer
. kern_specific.conf: specific kernel features like sound control, WIFI power, fast charge... - Edit any above file to change the settings you want using app like ES Explorer, Root Explorer..., instructions included inside
- Settings are automatically applied when user saves any of these files
- Some changes require restarting your phone
- To check log to see if it works use "logcat|grep Trickster" from adb/terminal
Reinstall boot service, Reset settings, Removal instructions:
- If you install a new kernel that includes ramdisk (boot.img format like franco or leanKernel), you can either reinstall Trickster MOD, run "tricks install" from adb root shell or terminal, or apply this CWM zip from recovery.
- You can delete a configuration file, files, or entire /sdcard/trickster directory to reset to default settings for a file, files or all configuration respectively
- If you mess up and can't boot, say aggressive OC/UV , use this CWM zip to reset
- If you want to uninstall, use this CWM zip
Credits:
- Google
- Our great kernel devs
- chainfire for SuperSU and su
- stericson for busybox
- ch33kybutt's for his brilliant idea on screen state optimizations
- Beta testers for your dedication in testing this
- nexus.prime for his unintallation script
- phone_user for init.d CWM zip
- Anyone I learnt from
Disclaimer: This is provided with NO GUARANTY whatsoever. Use your common sense.
Beta test: If you want to test my stuffs, including other things beside this. Contact me through PM.
Flash failed in twrp...getting an error message that it can't open the zip.
Edit--
I fail at reading directions... :/
Sent from my Galaxy Nexus using Tapatalk 2
So what really happened? I haven't tried it with TWRP, but I want to know if it does work with this recovery?
bigeyes0x0 said:
So what really happened? I haven't tried it with TWRP, but I want to know if it does work with this recovery?
Click to expand...
Click to collapse
Worked w twrp on eclipse.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks for your contribution .
Seems to be giving me more battery
Sent from my Galaxy Nexus using xda premium
Gonna give it a go... Gummy 1.2.2 .
V6 super?
Shall I un-super?
vzw GNex
tacosrdelicioso said:
Seems to be giving me more battery
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yes and also smoother .
Juiced718 said:
Gonna give it a go... Gummy 1.2.2 .
V6 super?
Shall I un-super?
vzw GNex
Click to expand...
Click to collapse
You should but keep supercharged services.jar|odex if you did that.
Just curious, if you have this installed and install either a new ROM or kernel over the top of this does it need to be reinstalled?
bigeyes0x0 said:
So what really happened? I haven't tried it with TWRP, but I want to know if it does work with this recovery?
Click to expand...
Click to collapse
Yeah, sorry...had a faulty download the first time around. worked fine in twrp after a clean download.
Sent from my Galaxy Nexus using Tapatalk 2
skusa93 said:
Just curious, if you have this installed and install either a new ROM or kernel over the top of this does it need to be reinstalled?
Click to expand...
Click to collapse
a new ROM - definitely
a new kernel - sometimes as some might clean up init.d directory.
When running tricks through term... I'm not quite sure that the changes have taken effect, is there an easy way to verify?
I'm no dev so be nice....
vzw GNex
Trying this with Franco r163 with app removed, running eclipse, will report back.
Sent from my Galaxy Nexus using XDA
Juiced718 said:
When running tricks through term... I'm not quite sure that the changes have taken effect, is there an easy way to verify?
I'm no dev so be nice....
vzw GNex
Click to expand...
Click to collapse
Log is written to logcat, use any logcat reader app or use logcat|grep Trickster from terminal or adb.
smittycg said:
Trying this with Franco r163 with app removed, running eclipse, will report back.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
What's the difference with app removed
Sent from my Galaxy Nexus using xda premium
Obviously because settings from franco app might interfere with this in some cases.
How do you run this app
Sent from my Galaxy Nexus using Tapatalk 2
reggiec74 said:
How do you run this app
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
good job buddy!
on another note..can this be flashed over a MIUI Rom?
SoCalSpecialist said:
good job buddy!
on another note..can this be flashed over a MIUI Rom?
Click to expand...
Click to collapse
The op says anything with root and init.d
Sent from my Galaxy Nexus using xda premium
SoCalSpecialist said:
good job buddy!
on another note..can this be flashed over a MIUI Rom?
Click to expand...
Click to collapse
Common sense by reading requirements say it should.
InformationThis kernel is forked from the CyanogenMod Kernel and i have added a few additional changes of my own and more to come. My builds of AOKP and Gummy have this kernel pre-installed with the Kanged Gummy Kernel but when i release 1.0 it will have a few more tweaks so you would need to upgrade.
There will be 4 files you can download. The boot.img and zImage can both be flashed using Heimdall. The Flashable zip and Odin tar.
Bugs
Deep Sleep works but when using LiveOC it does not so i recommend only using this when playing games or maybe make a script to disable this when you device locks in the time being.
Differences
LiveOC
More Frequencies (100MHz, 200MHz, 400MHz, 600MHz, 700MHz, 800MHz, 900MHz, 1000MHz, 1100MHz, 1200MHz, 1300MHz, 1400MHz)
Lulzactive v2 Governor (My preferred choice)
Tiny shmem
Working on more!
Using Features In The KernelLiveOCHere is information on it This is configurable using a tool known as NSTools on the PlayStore. When using this 100% means the bus frequency is at 100% try not to get confused. So 100% of 100MHz would be 100MHz so if you increase it to 120% so it would be 120% of 100MHz would be 120MHz and this value applies to all CPU frequencies, GPU ect.
LulactiveThis is like other governors for the CPU and can be configured using applications like Voltage Control, SetCPU, NSToolsand built-in tools from CM9/10 and AOKP ect.
Downloads
All Devices - http://goo.im/devs/henryedwardrose/Kernel/ICS
P1 - zImage - Boot.img - Flashable.zip - Odin.tar
P1L - zImage - Boot.img - Flashable.zip - Odin.tar
P1N - zImage - Boot.img - Flashable.zip - Odin.tar
Installation
zImage or boot.img
Use command line tool known as 'heimdall' (for people comfortable with the command-line)
Flashable.zip
Installed using CWM (the easiest methord)
Odin.tar
Put this file in the PDA section on Odin (Windows only)
Special ThanksThe TE4M - Nice work on developing the kernel and getting our device officially supported by CyanogenMod!
Dizgustipated - Nice Guy, Excellent Roms and Kernel!
Technomancer - The Guy who originally ported CM7 to our tab
SourcesMy Github
BuildingYou can build this kernel yourself in two ways
The First MethordIs by adding it into your manifest in your android build environment which supports integrated kernel building like CM9/10 and AOKP.
If you want it in your own Rom then simply just perform the regular build commands
If you just want to build a boot.img then apply the following commands
source build/envsetup.sh
lunch cm_p1-userdebug (change this depending on what device you would like to build)
make out/target/product/p1/boot.img
Click to expand...
Click to collapse
The Second MethordBefore the integrated kernel building system you used to build a kernel outside of this in it own separate environment so i have made it possible without have to download the android build environment to build any kernel for this device and you just have to run a build script and tell it what device you want to make.
Firstly you want to use the following commands
mkdir Kernel
cd Kernel
repo init -u https://github.com/henryedwardrose/Kernel_Manifest.git -b master
repo sync
Click to expand...
Click to collapse
Ok when synced you will see that there are three directories. Two of which are what you need. The 'Files' directory
is where all of the other files go that are necessary to build the kernel. The build.sh is a nice bash script which
you can open and easily understand what commands are being executed and how the files are being used.
Anyways here's how you build:
Firstly in the terminal go to the Files directory
cd Files
Click to expand...
Click to collapse
Now run this following command to extract the ramdisks (you only have to do this when i have uploaded a new ramdisk)
./RUNAFTERSYNC.sh
Click to expand...
Click to collapse
Then you want to build the kernel and at the end you will end up with the following flashable files 'zImage,
boot.img, .tar, .zip'
Now you need to initiate the building process
./build.sh
Click to expand...
Click to collapse
Now follow the commands on screen and you will end up with the kernel located in the out directory and you can flash
via Heimdall (zImage and Boot.img), Odin (.tar) and CWM (.zip)
Enjoy!
Thanks for you work...
Please build for all model (P1,P1l,P1N, P1C)..
a-vista said:
Thanks for you work...
Please build for all model (P1,P1l,P1N, P1C)..
Click to expand...
Click to collapse
oops! forgot this information lol :silly: Of course, well except for P1C atm
thanks for kernel. love your work bro.
i flashed on my p1. im trying and write back here for bugs etc.
can someone post some screen shots..???? PLEASEEE...
[email protected] said:
can someone post some screen shots..???? PLEASEEE...
Click to expand...
Click to collapse
ScreenShots from what???
This is a kernel, nothing changes visually...
Just performace, battery..etc..
hi
thanks again your work.
i tried kernel but it doesnt going into DEEP SLEEPtab working always 1200.
my options is smartassv2 and sio.
Used this kernel can be used camera 360 ?
It feels smooth indeed. Quadrant score at 1300 MHz with Cm9 is around 2600-2700.
Kernels includes CWM right? I wonder if I can have this on my P1000N stock GB 2.3.3.
Sent from my HTC Desire S
Hi henry.
My tab is p1000 and im on your aokp milestone 6 (not the rebuild 1). I decided to update my kanged gummy kernel to 1.0 as suggested in the op. I tried the zip for p1 using cwm recovery, and my tab was stucked to the samsung logo. Cant go to recovery too. So i decided to use the .tar in odin, and its now perfectly.
Just a heads up that there maybe something wrong with the zip version. But neverrtheless, thanks for this wonderful kernel!
I have a p1 too and i have download cwm file i have instal it with no issue.
Maybe a wrong download ?
@Henry,
with rebuild 1 kernel is the latest kernel or i have to redownload and install ?
Thank's
Hope someone can upload it to other sites. Rapishare really sucks.
Sent from my GT-N7000 using xda premium
MarlX said:
Kernels includes CWM right? I wonder if I can have this on my P1000N stock GB 2.3.3.
Sent from my HTC Desire S
Click to expand...
Click to collapse
Yes it does, yer you can and will install but it will NOT boot unless you have ICS on your device.
vince_junior said:
Hi henry.
My tab is p1000 and im on your aokp milestone 6 (not the rebuild 1). I decided to update my kanged gummy kernel to 1.0 as suggested in the op. I tried the zip for p1 using cwm recovery, and my tab was stucked to the samsung logo. Cant go to recovery too. So i decided to use the .tar in odin, and its now perfectly.
Just a heads up that there maybe something wrong with the zip version. But neverrtheless, thanks for this wonderful kernel!
Click to expand...
Click to collapse
Thank you for your report its always appreciated It has worked for me and i have a p1 but i will test it soon again to see if i have any issues
chickygamon said:
I have a p1 too and i have download cwm file i have instal it with no issue.
Maybe a wrong download ?
@Henry,
with rebuild 1 kernel is the latest kernel or i have to redownload and install ?
Thank's
Click to expand...
Click to collapse
There is no need to install it but if you install this one it won't hurt its the same.
Gpsrisk said:
Hope someone can upload it to other sites. Rapishare really sucks.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will upload it to goo.im soon but working on jb atm
henryedwardrose said:
I will upload it to goo.im soon but working on jb atm
Click to expand...
Click to collapse
Wow!
New Link
Hey, Uploaded All files to Here now;
http://goo.im/devs/henryedwardrose
Click to expand...
Click to collapse
enjoy!
henryedwardrose said:
Hey, Uploaded All files to Here now;
enjoy!
Click to expand...
Click to collapse
Something wrong with goo.I'm server. ?
Sent from my GT-P1000 using Xparent ICS Tapatalk 2
well this sucks all links are broken
tohno said:
well this sucks all links are broken
Click to expand...
Click to collapse
Goo.im are down atm i am going to upload them again when they are back up. In the mean time i am working on a few things and i may rebuild the kernel with gcc 4.6 check the op are the links still working on rapidahare?
Sent from my GT-P1000 using xda app-developers app
Hey all, sorry I couldn't post a reply in the original dev forum because I'm too new. Just had a question for the folks using
[ROM] AOKP(Jellybean) Task & Ktoonsez (9/14) and Ktoonz 9.14 kernel.
I can't seem to find "ktweaker" anywhere. Wanted to play with some voltage settings. Closest thing I can find is under ROM Control, under the performance menu I have CPU SETTINGS, which i cant go over 1512 or under 384, and a tab for voltage settings but that tab tells me that my kernel doesn't support voltage control.
Any help would be appreciated
I've attached a screenshot of my kernel for reference.
Thanks!
Based on that screenshot, you're on the kernel that comes with AOKP, not ktoonsez's kernel. You'll find that here: http://forum.xda-developers.com/showthread.php?t=1756776
Once you get that flashed, Ktweaker should appear in the app drawer.
MdX MaxX said:
Based on that screenshot, you're on the kernel that comes with AOKP, not ktoonsez's kernel. You'll find that here: http://forum.xda-developers.com/showthread.php?t=1756776
Once you get that flashed, Ktweaker should appear in the app drawer.
Click to expand...
Click to collapse
thanks for the reply!
That's odd because I downloaded and flashed from that page. I downloaded the AOKP Jellybean Build 9.14.2012. Is there something I could be doing wrong with flashing the kernel? I booted into recovery, ran the .zip files, wiped caches, fixed permissions and rebooted.
baskln said:
Hey all, sorry I couldn't post a reply in the original dev forum because I'm too new. Just had a question for the folks using
[ROM] AOKP(Jellybean) Task & Ktoonsez (9/14) and Ktoonz 9.14 kernel.
I can't seem to find "ktweaker" anywhere. Wanted to play with some voltage settings. Closest thing I can find is under ROM Control, under the performance menu I have CPU SETTINGS, which i cant go over 1512 or under 384, and a tab for voltage settings but that tab tells me that my kernel doesn't support voltage control.
Any help would be appreciated
I've attached a screenshot of my kernel for reference.
Thanks!
Click to expand...
Click to collapse
I think all KT kernels now have KTweaker. It's an app in your app drawer, select it then check allow over clocking at the top. Should be good to go.
Think I figured it out, originally I had installed the kernel before booting into the freshly installed rom. I just rebooted into recovery and installed the kernel again. Now my phone is running extremely slow for some reason, gonna try a reboot and report back.
Wow, things are real screwed up now, phone running extremely slow, I see Ktweaker but it force closes, can't connect o mobile network /sigh
Any suggestions?
baskln said:
Wow, things are real screwed up now, phone running extremely slow, I see Ktweaker but it force closes, can't connect o mobile network /sigh
Any suggestions?
Click to expand...
Click to collapse
Do this dude.
Flash my ROM and gapps.
Then flash ktoonsez kernel. Make sure you flash the jellybean aosp kernel.
Its sounds like you haven't read either of the OP's of both the ROM and kernel threads and it also sounds like you flashed the wrong kernel. Read them please.
U didnt install right make sure you clear dav/ cash
Sent from my SAMSUNG-SGH-I747 using xda premium
task650 said:
Do this dude.
Flash my ROM and gapps.
Then flash ktoonsez kernel. Make sure you flash the jellybean aosp kernel.
Its sounds like you haven't read either of the OP's of both the ROM and kernel threads and it also sounds like you flashed the wrong kernel. Read them please.
Click to expand...
Click to collapse
Thanks that seemed to work. Just did a clean install for good measure as well, ktweaker is there and everything is running smoothly. I love your ROM btw, thanks again!
Hy,
I have the latest paranoid Android ROM (4MAR2013) and i just flashed Franco Kernel in the recovery like usual but this time, there's no "performance" settings in the settings. I can't access the kernel tweaks from there. Is there any other thing i shd have done ? Is there an extra app to flash or to download ?
Thanks for answering !
Sent from NeverLand
Trickster mod from play store
Sent from my Galaxy Nexus using Tapatalk 2
bartholomey said:
Hy,
I have the latest paranoid Android ROM (4MAR2013) and i just flashed Franco Kernel in the recovery like usual but this time, there's no "performance" settings in the settings. I can't access the kernel tweaks from there. Is there any other thing i shd have done ? Is there an extra app to flash or to download ?
Thanks for answering !
Sent from NeverLand
Click to expand...
Click to collapse
trickster mod from play store if you want a free app and franco kernel updater from play store if you want to support franco
Thanks for the Quick answer !
You rock !
Sent from NeverLand