Hi.
Yesterday I donwloaded MIUI 3.2 and was very much happy with it until I found out I cannot connect to my wireless. In fact my SSID is not even listed. The only ones I see are the ones with TKIP encryprion, but as much as I know/read wireless n + TKIP is a no-go. Tried to setup a connection manually with no luck.
I have no problems connecting to my wireless with CM9 alpha5, Hensemod7 and MIUI v4.
Searching forums did not give any desirable results.
My setup:
Wireless: TP-LINK 1043ND w/ stock firmware; wireless b/g/n; WPA2/PSK+AES
Phone: HTC Wildfire S A510e; S-ON; unlocked bootloader (htcdev)
Any help/info would be appreciated.
TIA
SOLVED
The problem was wifi channel.
Some time ago I've set up my router to channel #13 whitch according to Wifi Analyzer was least crowded one.
Using CM9 alpha5, Hensemod7 and MIUI v4. ROMs this was not an issue. Switching to channel #1 solved my problem.
Hope this helps someone.
Related
Tonight I have updated my amethyst rom and now I can not find my home network. I do see the networks of my neighbors.
Does anyone have an idea how I can solve this?
Have already tried different kernel versions and reset my modem .... I do have internet on my laptop ...
Gr. Jasper
Changing the wireless channel on your router to 12 might work.
I have changed it but that has not helped
does anyone have an idea how I can solve this?
HTC Desire Amethyst-RC8, 2.6.38-rc6-couttstech
blokj11 said:
Tonight I have updated my amethyst rom and now I can not find my home network. I do see the networks of my neighbors.
Does anyone have an idea how I can solve this?
Have already tried different kernel versions and reset my modem .... I do have internet on my laptop ...
Gr. Jasper
Click to expand...
Click to collapse
I had the same problem recently after a ROM change. I found that I couldn't connect using channels 11 - 14, even though it was set to detect up to channel 14. I set the modem to channel 1 and it worked fine. Just keep trying different channels on your router/modem until you find one that your phone detects.
Thanx al lot!!! Why i didn't think of that! Now it's working fine!!! i changed it to channel 1
Greetings, everyone.
I have a Defy running on Jboogie3 Blurless Honey (2.2 Froyo), rooted and all...but i can't get it to connect to my univeristy's wi-fi; I've read it's a known problem in 2.2 and...I kind of fixed it: I've replaced wpa_supplicant,wlan_cu and wlan_loader in my /system/bin folder for some files I ran into the net. This "solution" worked on ADLXMOD F4D 2.2 (another 2.2 ROM for Defy) but doesn't seem to work on Jboogie3...well, it partially worked, because I couldn't add any networks, but I could connect to the WPA-EAP wi-fi on my university. Anyone running JBoogie3 has been able to connect to an enterprise network? or anyone running 2.1 can please post wlan_loader,wlan_cu and wpa_supplicant?
The network parameters are:
Auth: WPA
Data encoding: AES,TKIP or WEP128
EAP: PEAP
Auth method: MSCHAPv2
TL;DR: Can't connect to enterprise wi-fi, anyone running Jboogie3 has been able to? Anyone running 2.1 can post wpa_supplicant,wlan_cu and wlan_loader?
Sorry for horrible spacing and bad grammar, my English is rusty. Thanks.
Hello,
I've problems to connect with some access points with the current MIUI version.
The SSID was found, I set the pass and then the connection was rejected. If I try with Froyo 2.2.2 it works fine.
I've tested different access point configurations:
- b/g/n
- b/g
- g only
- WPA/WPA2
- WPA TKIP only
In the Milestone section I've read, that this phone has the same problems and a ROM version from eybee will solve this. Is there a fix for the Delfy, too?
Ralf
Hello everyone!
I installed the ICS 4.0.4 BCM RC4.1U2 on my Desire (using Data++ layout)
The installation worked perfectly but unfortuanetly I am not able to connect to an 802.1x EAP WiFi (eduroam at University of Paderborn, Germany). I used the exactly same settings as before on the Froyo HTC Stock Rom, there I've never experienced any problems: EAP-TLS including root and client certificate.
Obviously the wifi configuration is not saved properly on the phone now, so that no connection is established at all. When I try a second attempt to connect, the configuration for the eduroam is still blank.
Is this problem a known issue for the ICS 4.0.4 BCM RC4.1U2? I could not find any bug reports concerning this. Connecting to other wifis (WPA or WEP encrypted) is no problem. I even tried a full wipe and re-install, but I have still the same problem.
Does anyone have an idea? I'd be very thankful for help or hints...
workaround
OK, played around a little bit... It seems to be a bug in BCM RC4.1U2. I installed BCM RC4.0U0 and could create the connection without problems. Then I flashed BCM RC4.1U2 without wiping. Now the connection (created under BCM RC4.0U0) is still available and working
I'd like to report this bug in the BCM developer thread but I don't have permissions to post there, yet... Any suggestions?
Hi,
i just encountered exactly the same problem.
Coming from CM7 with full wipe it is not possible to save any EAP wifis.
Existing ones show up on scan but it is neither possible to connect to one nor to create a profile for a non existing one. After hitting save nothing happens. WPA/WPA2 networks work just fine...
Best regards!
---------- Post added at 11:18 AM ---------- Previous post was at 11:14 AM ----------
The problem was mentioned also in the developer thread.
As a quick and easier workaround (no downgrading) i can confirm that using
swift wifi from store (srry am not allowed to post link to app but heres the link to the post in the dev forum: http://forum.xda-developers.com/showpost.php?p=28537392&postcount=6580)
works fine for me!
Swift wifi widget solves this issue. Thanks!
Hi!
Now I encounterd the same problem after re-install again. Swift Wifi doesn't help because I cannot choose the certificates. The certificates are installed, I can choose them in the "native" wifi options, but here again I can't save the 802.1x profile. This time I would like to avoid downgrading as a workaround. Any suggestions?
Ok guys, here is my problem. I've changed a lot of roms so far, and latest miui rom for desire, from their site, is the one I like the most. I've been using it for two months until today without any problem. Today I realized that I can not connect to the wifi network which is using protocol from the tittle. It is just keeps tryng to connect and fails. It is something released to this rom becouse I can use that network with all other roms (tryed today). Is there anything I can try that could fix this problem?
Of course , sorry for my bad english, I hope you can understand me.
Sent from my HTC Desire