I am kind of new to this and it this has been frustrating me all day. I had CM7 on my HTC Evo 4G for a while and it started to run slow so I decided I needed something new (other then a new phone). So I tried MiUi (latest version) and I loved it. Ran smooth and was quick. I installed my titanium backup and it was not getting root permission. I tried installing busybox (wouldnt install) and i also installs CWM and Super User. Nothing helped. Someone had told me I needed a Kernel. So I went and tried a couple. I tried the Mason Kernel and the phone would just give me a blank screen. The only kernels that worked were Tiamat Kernels, the SBC ones lagged heavily straight off the bat, the other 2 did not lag at first but after a few minutes it started to lag heavily as well. Then afterwards MiUi would not respond. What am I doing wrong? Honestly I just want to restore my apps with titanium back up and have it get root rights. What do I do?
deeryders said:
I am kind of new to this and it this has been frustrating me all day. I had CM7 on my HTC Evo 4G for a while and it started to run slow so I decided I needed something new (other then a new phone). So I tried MiUi (latest version) and I loved it. Ran smooth and was quick. I installed my titanium backup and it was not getting root permission. I tried installing busybox (wouldnt install) and i also installs CWM and Super User. Nothing helped. Someone had told me I needed a Kernel. So I went and tried a couple. I tried the Mason Kernel and the phone would just give me a blank screen. The only kernels that worked were Tiamat Kernels, the SBC ones lagged heavily straight off the bat, the other 2 did not lag at first but after a few minutes it started to lag heavily as well. Then afterwards MiUi would not respond. What am I doing wrong? Honestly I just want to restore my apps with titanium back up and have it get root rights. What do I do?
Click to expand...
Click to collapse
Try a different rom :silly:
Sent from my PC36100 using xda premium
lreyes15 said:
Try a different rom :silly:
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
OK, that was stupid advice.
It's pretty simple actually, after you reflash the ROM, go to Supewruser app and set permissions. Hit menu and make sure permissions are on. Then you have to reboot
HipKat said:
OK, that was stupid advice.
It's pretty simple actually, after you reflash the ROM, go to Supewruser app and set permissions. Hit menu and make sure permissions are on
Click to expand...
Click to collapse
Yeah^ if that doesn't work, I've found that the super su app works. Also, Mason kernels are basically an updated tiamat kernel(s) but ATyoung kind of made it his own. But thats not the point. HipKat, good advice man. :good:
Sent from my PC36100 using xda app-developers app
kernel
MBQsniper said:
Yeah^ if that doesn't work, I've found that the super su app works. Also, Mason kernels are basically an updated tiamat kernel(s) but ATyoung kind of made it his own. But thats not the point. HipKat, good advice man. :good:
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
hey what is a good kernel for this rom?
sooo
so is the latest MiUi already come with a kernel and doesnt need an external one? i downloaded superuser from the market and titanium still is not working properly. It says it need busybox. should i install this from the market aswell? there is obviously something i am doing wrong.
deeryders said:
so is the latest MiUi already come with a kernel and doesnt need an external one? i downloaded superuser from the market and titanium still is not working properly. It says it need busybox. should i install this from the market aswell? there is obviously something i am doing wrong.
Click to expand...
Click to collapse
Does it not automatically download superuser after you rooted your phone? And yes,the latest one has a kernel of its own: http://forum.xda-developers.com/showthread.php?t=1553585 . But Im currently using night elf with it.
Sent from my MT11i using xda app-developers app
Related
Just installed Miui rom and love! Rom manager wont work. Any have a fix?
Sent from my PC36100 using XDA App
I'm pretty sure I read somewhere that ROM Manager doesn't work with MIUI, it's a known issue. I could be wrong about that but I don't think I am. I have some excellent news for you though- Everything that you can do with ROM Manager can also be done manually through recovery! Isn't that awesome??
Yeah I know that but it was so easy. It did everything for you.
Sent from my PC36100 using XDA App
Yeah but honestly, doing it through recovery is still pretty easy and it gives you some good hands on with your EVO. The more you do yourself, the more comfortable you are with doing things, whatever those things may be. Plus, the general consensus is that Amon_RA is a better recovery and ROM Manager only works with Clockwork.
MoMojo69 said:
Just installed Miui rom and love! Rom manager wont work. Any have a fix?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
_MetalHead_ said:
I'm pretty sure I read somewhere that ROM Manager doesn't work with MIUI, it's a known issue. I could be wrong about that but I don't think I am. I have some excellent news for you though- Everything that you can do with ROM Manager can also be done manually through recovery! Isn't that awesome??
Click to expand...
Click to collapse
What is it that isn't working for you? It works flawlessly for me. Always has. I've never really understood all the nonsense about RM "not wiping properly" or being flawed. I have used it since day one on my EVO and I never have any issues with reboots or FC's or any of that junk. Amon is great, I used it on my G1, but Rom Manager is just too damn convenient.
I've never had any issues with RM and it is definitely working on MIUI 11.12, at least on my EVO it is. I flashed 11.12 from 11.5 via CM and just backed up 2 minutes ago.
Just_s said:
What is it that isn't working for you? It works flawlessly for me. Always has. I've never really understood all the nonsense about RM "not wiping properly" or being flawed. I have used it since day one on my EVO and I never have any issues with reboots or FC's or any of that junk. Amon is great, I used it on my G1, but Rom Manager is just too damn convenient.
I've never had any issues with RM and it is definitely working on MIUI 11.12, at least on my EVO it is. I flashed 11.12 from 11.5 via CM and just backed up 2 minutes ago.
Click to expand...
Click to collapse
Well there you go, I was wrong. I could have sworn that I read that it wasn't working with MIUI, maybe it was for the 10.29 release.
Anyways what I noticed with clockwork is that when you wipe the dalvik it doesn't actually do anything, it just instantly goes right back to the previous menu when you select wipe dalvik. With RA it actually takes a few seconds to wipe the dalvik which is why I dont think clockwork does it properly. I know I'm not the only person with that experience.
Sent from my PC36100 using XDA App
_MetalHead_ said:
Well there you go, I was wrong. I could have sworn that I read that it wasn't working with MIUI, maybe it was for the 10.29 release.
Anyways what I noticed with clockwork is that when you wipe the dalvik it doesn't actually do anything, it just instantly goes right back to the previous menu when you select wipe dalvik. With RA it actually takes a few seconds to wipe the dalvik which is why I dont think clockwork does it properly. I know I'm not the only person with that experience.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Actually, in Clockwork, after select "wipe dalvik", it will appear to do nothing, then a second menu will popup and you agree to wipe and all is good. As I said, I have never had a problem and I have flashed around 90% of the ROMs out for the EVO. Clockwork definitely works.
That said, there is no question that Amon-Ra is more powerful and user friendly. If ROM Manager worked with AR, I'd definitely choose it over CW. But the efficiency and convenience of RM is more valuable to me.
So to make it short my version of Miui doesn't support RM cause I think I got the 10 Something. If I get the latest it will work?
Sent from my PC36100 using XDA App
I missed that last comment of yours. But I have gone through the recovery and all that flashing myself to get where I am now. Now that RM is out I'm hooked. I use clockwork and am comfortable with it so I want to continue to use it.
Sent from my PC36100 using XDA App
Serious trouble
Flashed MUIU...kinda lkike it but having trouble using it...
MAJOR PROBLEM...can't reboot into recovery mode to change back. Rom manager not supported (it can't load anyway), Android app store apk not present...
I can't find any way out of this ROM....HELP
Did anyone flash the new recovery version in rom manager?
Sent from my ADR6300 using XDA App
I did. Not sure about changes in the coding but the new UI is nice.
Sent from my ADR6300 using XDA App
I heard it is mainly for 2.3 ROMs and such, is that true? I'm on Magnolia which is 2.2, would I run into any issues?
weird.. i flashed the new recovery through rom manager then booted into recovery but still had 2.5 on there..
Flashed it this afternoon, using CM nightly #32. Using ROM manager to backup etc., would give me errors when it got to recovery. Some error about the sd card mounting I think. It would work fine booting to recovery, just not using ROM manager. Think the nightly update tonight might address the issue. Had to flash back to an earlier recovery to use ROM manager.
Could not install a new rom with it.
sent from my Incredible using Tapa Talk
I flashed slayers test kernel with it and it seemed to work fine. Have not tried to run a back up yet.
Sent from my ADR6300 using XDA App
Is there a zip to install this new recovery instead of using rom manager? I always remove rom manager from CM7.
what is the new UI and why cant i boot into it? im on cm7.
converge12 said:
what is the new UI and why cant i boot into it? im on cm7.
Click to expand...
Click to collapse
its orange now
You can get it from Koush's website
http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html
anyone have a changelog?
Drewsipher said:
anyone have a changelog?
Click to expand...
Click to collapse
It requires some sort of new update script, we use the donut update script so koush is pushing us towards the future with this recovery, it works with any kernel because of it being koush's update script. Some roms might work, ask your favorite developer if it is compatable
Sent from my Incredible using XDA App
Darnit! Flashed it and now I can't install any font packs anymore. I guess it has something to do with the update script. Going back to a previous version if I can figure out how.
Sent from my Incredible using XDA App
superchilpil said:
It requires some sort of new update script, we use the donut update script so koush is pushing us towards the future with this recovery, it works with any kernel because of it being koush's update script. Some roms might work, ask your favorite developer if it is compatable
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
well... my I'm running cm7 so I knew I'd be well done in his hands... Multi-touch not working?
anyone with an idea as to why i cant boot into it?
converge12 said:
anyone with an idea as to why i cant boot into it?
Click to expand...
Click to collapse
I can't either
Running CM 7 nightly #25. Flashed the 3.0.5 and I couldn't boot into Recovery. Just reverted to 2.5.1.2, guess we'll have to wait until something gets patched up in CM.
Worked for me. I like the look.
Sent from my Droid Incredible running Myn's Warm Two Point Two RLS5.3.
oh man, i can no longer access recovery. dayum...
i guess i should post some details: updated from 2.7.1.? (2 or 3, whatever) to 3.0.0.5 via free version of rom manager. just happened to have my stock rom loaded at the time.
edit: thx everyone. downloading the zip and reinstalling got me back up and running. yay! thx! i am disappoined, though, that md5 operations still take 15-20 minutes. i was hoping that would be fixed in this release.
Not sure if its the fact i am running CM 7 or what but whenever i try a different kernel then there stock everything boots just fine but the touch screen doesn't work. I am lost and have no clue what to try.
What kernel are you trying to flash?
Sent from my ADR6300 using XDA Premium App
If running cm7, ya gotta flash a gingerbread AOSP kernel - try that.
Sent from my ADR6300 using XDA Premium App
I believe it was the AOSP kernel part that i was missing. I finally got a Invisiblek to install. Thanks for the help.
bjohnson8949 said:
I believe it was the AOSP kernel part that i was missing. I finally got a Invisiblek to install. Thanks for the help.
Click to expand...
Click to collapse
Invisiblek is the way to goon Gingerbread roms. I've flashed his newest with OMFGB 1.1.1, and it is awesome. No problems snappy, excellent battery too!
Sometimes people (including me) mix up AOSP and Sense, sadly they don't like to play with others if you install them with the wrong rom. Racists, pft.
I have only had the phone about a week now so I have had a lot to learn. So far everything seems good now and I am happy. Now if i could just get better battery life lol.
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746 I am getting same issue installs fine boots. Then when I try to unlock screen I get nothing. I have HtC incredible running cm 7 rc 3
clockworkmod 3.0.0.8
radio 2.15.00.11.19
If you need anymore information let me know.
I am doing the following for install.
reboot to recovery
clear cache
clear dalvik cache
install zip from sd card
Thanks for all the help already
bjohnson8949 said:
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746 I am getting same issue installs fine boots. Then when I try to unlock screen I get nothing. I have HtC incredible running cm 7 rc 3
clockworkmod 3.0.0.8
radio 2.15.00.11.19
If you need anymore information let me know.
I am doing the following for install.
reboot to recovery
clear cache
clear dalvik cache
install zip from sd card
Thanks for all the help already
Click to expand...
Click to collapse
It worked fine for me...and still working
Maybe download it again and then try it. Just as a question are you by chance trying to flash a froyo kernel and not realizing it? Its gotta say gb or gingerbread
Sent from my ADR6300 using XDA App
I was trying to flash Tiamat Version 3.3.3-sbc -- Current Gingerbread with SBC from the link I posted.
bjohnson8949 said:
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746
Click to expand...
Click to collapse
bjohnson8949 said:
I was trying to flash Tiamat Version 3.3.3-sbc -- Current Gingerbread with SBC from the link I posted.
Click to expand...
Click to collapse
The link you provided is the EVO kernel. Have you tried the Inc kernel?
Evo: http://www.thebcblends.com/cayniarb/Kernels/evo/Tiamat_Evo-v3.3.3-sbc.zip
Inc: http://www.thebcblends.com/cayniarb/Kernels/inc/Tiamat_Inc-v3.3.3-sbc.zip
The zip files have different contents.
EDIT - I just realized the thread you linked has both the Inc and the Evo versions. I saw that it was in the Evo subforum and jumped to the wrong conclusion. In any regard, make sure you are flashing the right one.
I just flashed
Inc: http://www.thebcblends.com/cayniarb/Kernels/inc/Tiamat_Inc-v3.3.3-sbc.zip
and i am still having same problem. Any ideas ?
Edit: Messing around with rooted phones is something I have just started so it maybe something simple I am missing.
Not sure why my cell doesn't seem to like other kernels but
http://forum.xda-developers.com/showthread.php?t=905873
seems to be doing just fine so i will leave it alone.
Thanks for all the help.
Have you tried Incredikernel? Kernels are really a matter of personal preference, but Incredikernel seems to be one of the best. (And also my favorite.)
I gave it a shot a while back and had trouble. My issue is that he touch screen doesn't respond. Incredikernel is recommended in several places but i had zero luck with it supporting the screen. I have started to wonder if its support for slcd.
I will try it again and see what happens.
I see more people look at the General section more then the Q and A so im going to post this here. Im running CM7, 7.0.3. Ive been using it since the cm7 release candidates. This happened during the RC's too, i would be using it, and it would work beautifully for about 3 weeks, then near the end of the week i would boot the phone, and then a bunch of apps force close. Every app that i open force closes, i cant do anything on my phone without something force closing. I cant receive texts, check emails or anything. I open an app and it just closes. Im really really sick of it. I tried re flashing 7.0.3, didnt work. Im looking for either a fix for this, a for sure fix. Or looking for guidance to the original froyo stock rom with sense. It might just be a gingerbread problem, i was rooted on stock for over a month before trying roms. I really need my phone to be working. Please give me some help i would greatly appreciate it!!!!
Well then i make that 1%. Last time it happened when i had Cyanogens last update to CM7 i tried fix permissions, both in recovery and through rom manager. Didnt help. Only thing that helped was installing the update for the next version, worked for about 3 weeks, and now im getting the same force closes. I already tried it today before you posted, didnt help to fix permissions. I can have rom manager open for about 5 seconds then it FC's. Never had this problem on my stock rooted froyo.
Any help? i need phone working alright by tomorrow hopefully.
Can you flash a 2.2 rom.
Sent from my Optimized Inc using XDA Premium App
Idk, can i? I thought you had to do something else to downgrade from gingerbread to froyo.
Nope. Download another 2.2 rom and flash back. The only problem is the kernel but that's in the rom and would change when you flash. I flash between gbread and froyo all the time. If you go Froyo I recommend a z rom. If you want you can do newtoroots new optimized shift its really stable.
Sent from my Optimized Inc using XDA Premium App
Could i get a link to the z rom?
Nvm i got it.
What about a link to the shift rom?
Beezwhammer said:
Could i get a link to the z rom?
Nvm i got it.
What about a link to the shift rom?
Click to expand...
Click to collapse
Its in the op. It will take you to the mikforums. Its in there. I think he has the hidden off. Just go to newtoroots roms.
Sent from my Optimized Inc using Tapatalk
It fast and badass. You'll love the lock screen.
Sent from my Optimized Inc using Tapatalk
http://themikmik.com/forums/viewtopic.php?f=157&t=1136
Sent from my Optimized Inc using Tapatalk
Says full whipe is required, that means whipe sd card? or the cache, data and factory reset?
Beezwhammer said:
Says full whipe is required, that means whipe sd card? or the cache, data and factory reset?
Click to expand...
Click to collapse
Wipe data factory reset, cache. Don't wipe SD card. Go to advanced then and wipe dalvik cache too. Just don't wipe SD card.
Sent from my Optimized Inc using XDA Premium App
Okay thank you it looks and sounds like a great rom.
Beezwhammer said:
Okay thank you it looks and sounds like a great rom.
Click to expand...
Click to collapse
My personal opinion it is. Very stable. But all the roms are great just depends what your looking for. This seems to be most stable for my needs but I haven't tried the dream teams synergy nightlies yet either.
Sent from my Optimized Inc using XDA Premium App
Transfering it to my phone right now. Ill let ya know how it goes
Its funny how the sprint boot comes up lol
That exact thing Used to happen to me all the time, that why i gave up on CM for awhile...for me it happened because i was using titanium backup...i stopped using titanium and now i never get that problem
Beezwhammer said:
Its funny how the sprint boot comes up lol
Click to expand...
Click to collapse
Hope it works better for you.
Sent from my Optimized Inc using XDA Premium App
Well its running alright, had a couple of random force closes for reasons i dont know. Its fairly slow rom tbh.. I have about 70 MB of memory normally, with CM i had about 200. Ran fast. I tried to look at overclocking, but no app would allow me to. Would any kernel be okay for it? Like chads incredikernel betas? I really need some more performance in this thing, its just running so darn slow! Other then that i really do like the rom.
Is there any way to kinda increase the memory available? Besides closing background apps and removing widgets.
Well i installed beta 8, and it wont go passed my HTC Incredible white screen now, it goes to that then goes black.. Uhhhhh what do i do now? I can get into recovery tho. I cant transfer any files. ****
Someone tell me what to do now... Im screwed..
Was able to mount through recovery, transfering the rom to the phone and going to reflash. ugh!!
Another edit, gah i wish i could just get s-on and not worry about rooting now anymore lol. I just want good performance and a useful phone.
I have been looking all over and my eyes are about ready to have a critical meltdown.
I have a T-Mo T-989 (Hercules) and have been looking for a JB ROM all night and found some shady threads or ROMs that don't work. I dunno, maybe I've installed something wrong, little help here?
Generally the ones that will install get hung up during the initial boot, wtf? Have run across some that wouldn't even install and would abort.
I should say I am using CWM 5.0.2.6... I think, its been so long since I have done anything to this phone so I forget but I know its ither Odin or CWM (or are they both one in the same? x.x ) I've been using Darkside Evolution ICS ROM all this time and would be nice to move up to JB if there is a stable one out there
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
iburnhearts said:
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Hmm, well I got goo manager and its now stuck on the TWRP's boot screen and just reboots after so long of sitting there :/ and its already deleted the rom, so I guess I have to go through the CWM rooting proceeders again?
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
i would say, to use twrp and download the latest cm10 Here.
i recommend twrp for stable flashing cause there's bugs in latest cwm...
PorscheHusky said:
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
Click to expand...
Click to collapse
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
John imilitym
bzlik88 said:
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
CWR 5027 isn't bad at all it's just that using darkside scripts with certain new recoveries has caused some people boot loops and also with the newer recoveries they aren't required since the built in wipe options work just fine.Personally I use the recovery here http://forum.xda-developers.com/showthread.php?t=1844637
and have had zero issues with it plus it has the darkside scripts built in
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
arthurgreeeen said:
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
+1. You can't go wrong with that Rom! I been running it for over a week now with zero complaints
Sent from my SGH-T989 using xda app-developers app
With the v3 sbean I couldn't get my home button to work when I ask tmo twice he didn't respond to my question. I'm looking at slimbean next we'll see how that goes
Sent from my SGH-T989 using xda app-developers app
I would recommend trying either AOKP OFFICIAL Build 5 (not sure if by time you read this if theres a newer one) or a CM10 Nightly. I've tried tons of different JB roms from 4.1 to 4.1.2 and those work good. Decent battery life without changing too many settings (I'm afraid to change too many things because I've hard bricked my phone before but barely got it replaced under the 20 day full exchange warranty). No random reboots or force closes for me so far. Highly recommend trying them out, very simple to flash.
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
duckied said:
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
And I haven't had anything go majorly wrong with cm10 since the nightlies went official. I'm on the 10/24 nightly right now.
Sent from my A100 using Tapatalk HD
Nice nice... I wanna test out CMX maybe I'll make a nand backup and check it out
Sent from my SGH-T989 using xda app-developers app
LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Actually... I have CMW6 now the touch one. Does that have something to do with it? The main issue I have with SBean and CM9's JB is eveyrone complains that they can't hear me, that I sound like a robot and the call is badly broken up or that I'm not speaking up like my mic isn't picking up on my voice very well.
Is this a ROM error or a kernel error? rather annoying frankly @[email protected]
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
duckied said:
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
This is a sure fix then? This would make me the happiest Porsche Husky on Earth if I could go back to Sbean
The customization features of it are to die for
Ooooo, wait a tic... I feel like such n00b now...
I kept downloading V1 thinking it was the newest one xD I think the V6 at the way bottom is the newest one. I'll try that for a few days then report back.
Edit: QUESTION - my screen is flickering (just installed SBEAN V6)... is that a bad install or did I have to fix permissions?
That pretty common in most JB rom but it usually goes away after few mins for me. You can go to settings and then developer options then disable hw overlay but you would need to do it on every boot because it won't stick after a reboot.
Btw you should check out official aokp-milestone-1 it not on here but Google aokp and download the one for our phone. Its pretty sick and stable.
Sent from my SGH-T989 using xda premium