Related
Disclaimer: This worked on my phone. I am not responsible if your phone turns into an expensive brick.
I know this isn't quite the update everyone was waiting for I managed to pull the 2.3.6 OTA files. I also managed to figure out how to flash them. Turns out CWM 5 offers root adb access, everything we need to update and root this phone. Note I tried CWM 6 but it said "possible loss of root" so apparently CWM 6 likes to reside on an already rooted phone.
Note this is not the most elegant solution. The most elegant would be a signed update.zip. The second most elegant would be something flashable with CWM or Odin. Too bad I don't know how to do those. I do know how to do this.
The first thing to do is make sure you are on the AT&T stock firmware. It doesn't matter if you've already flashed something else. No need to wipe cache or factory reset or anything (although if you run into problems you should try to do that step). Download it from samfirmware.com. Flash it with Odin. This will put you on stock 2.3.5. Even if you were already on 2.3.6, or rooted, or on Rogers, this will work. After the flash, boot the phone normally, wait a minute or so, and shut it down.
Now for the fun part. AT&T will not push the OTA to a non AT&T customer. The flash will also not work with a modified phone (hence the reflash to stock). How to gain root access to manually flash the OTA? If we install root, it will not install. If we install CWM, we will not have the stock recovery which is required to process the OTA. So...
How about this? We install CWM 5. You can find it here http://forum.xda-developers.com/showthread.php?t=1458153
Then we adb into the phone, and push the OTA files, and then reflash the stock recovery over CWM, and then manually reboot into OTA mode. That sounds crazy... crazy enough to work.
After you've flashed CWM, reboot into it and make sure your phone is still connected to your computer. We won't actually be using CWM, just the root access it provides over adb. Unzip the two zip files below (why use external hosting, I can store zips up to 11 MB on here) into a folder and run fota.bat. Ooo and ahh over your Gingerbread.
But what about root? Well, I posted in another thread a complicated method for rooting 2.3.6 using the root access from CWM, but how about easy? Boot your phone into 2.3.6 and let it sit for a minute or so, and shut it down. Reboot into Odin mode, and reflash CWM over the stock recovery (again). Copy the Superuser zip from the folder you made earlier to your SD card. Flash this with CWM. This is the beta of Superuser 3.2, courtesy of Rom Manager. Download the stericson busybox app from the Market if you want busybox as well.
This was a fun way to kill a weekend
Throws a signature verification failed error.
Try again with the new method
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Why go to 2.3.6? It´s better than 2.3.5 customized?
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
AraDreamer said:
Better question: we're getting ICS within the month, so why bother with 2.3.6 when you can just upgrade to 4.x.x when it comes down?
-Ara
Click to expand...
Click to collapse
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
narume said:
Had a few mild scares. After flashing CWM on stock, it refused to boot into it but after 3 tries and my screen acting up upon boot, it finally booted into CWM. Launched the bat file and it went well. Upon booting up and entering the update process, it froze up at 74% and refused to continue. Rebooted the phone and it once again entered the update process and this time it managed to finish. Phone rebooted and after checking "About phone", my phone is on 2.3.6 stock. When you initially provided the OTA files and the sig check failed, I had a good feeling this would be the only other way to do it as I tried to sign it and it also failed. Thanks for taking the time to post all of this.
Click to expand...
Click to collapse
When I was testing this, I saw that behavior if you didn't completely boot up the phone between steps (ie, flash stock firmware, boot phone, flash CWM, boot phone). I don't know what would cause it otherwise. Glad to see your phone made it.
narume said:
Because there are some people who will want to stick with 2.3.5/6 . He made this so that those who do, can update to 2.3.6 even when they aren't with AT&T, almost hassle free.
Click to expand...
Click to collapse
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Nardholio said:
Actually I did it because I've owned this phone for exactly two weeks and discovered all the available ROMs are based on 2.3.5 even though 2.3.6 has been out since December. CWMR with root has been out since January, and since then nobody else has rooted 2.3.6 or found a way to flash it. And I thought, it couldn't be that hard? And even more amazed when I discovered CWMR comes with root out of the box, without even touching /system. The only other missing piece was the stock recovery, which also wasn't out in the wild. 3 birds for one stone
On a side note, if you want to do some cleaning after the OTA and you decide to root, you can delete /cache/fota and /data/fota safely.
Click to expand...
Click to collapse
Ah, I see. Well, still, being able to flash to 2.3.6 is nice because if anyone ever decides to stick with 2.3.6 they can easily flash the update now. Maybe more people like you will pop up and start pushing out more useful content like this for the Glide so it won't be a dead area of development anymore.
Deleted a few system apps' with root uninstaller by accident on the phone, been trying for a few days to fix it, though failed. Thinking about re flashing the official firm ware. And hopefully getting the phone back to it's fully working order again.
It's currently running on 4.1.2, phone rooted, using I think a stock ROM though have CWM.
As said I want to reflash 4.1.2, this webpage (below) is about updating to 4.1.2. Can I still use the links/info on this web page? Its this relevant? http://www.android.gs/update-galaxy-grand-jelly-bean-4-1-2-xxamd6/
Or maybe members could be so kind to add a better link with instructions how to reflash my phone on stock firmware.?
I hear that 4,2.2 has some minor issues? So guessing 4.1.2 is a better? Or how about 4.4.Kitkat?
This might sound stupid, do I uninstall CWM before I reflash firmware? So I don't need to uninstall first 4.1.2,to install new 4.1.2.right? I am obviously a newbie, steep learning curve
Any links/info' help will be much appreciated, thankyou,
Alex
I'm sure this has been addressed but I can't seem to find a definitive answer. I am bone stock (stock recovery and no custom rom) with just root on AT&T.
There are no missing deleted apps, as I replaced them previously but I still have never been able to do any of the OTA updates. It's starts and then fails.
Is there a way to unroot and the do an OTA update? I am trying to avoid Odin so I dont have to wipe everything and then have to start all over and adjust settings to my liking an also reinstall all of my apps.
I seen there is an option in the Super User app to "completely unroot and uninstall". Will choosing this option allow me to finally do OTA?
I've never installed a custom recovery or a custom rom so I don't know why OTA's always fail. At this point, I dont really care about having root since the only reason I previously wanted it was to remove at&t bloatware but I'd rather have OTA's at this point.
Any advice or direction would be greatly appreciated! Please speak slowly and in layman's terms as I am an old fart that is still a bit of a n00b, lol.
Thanks!!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
n01un0 said:
I'm sure this has been addressed but I can't seem to find a definitive answer. I am bone stock (stock recovery and no custom rom) with just root on AT&T.
There are no missing deleted apps, as I replaced them previously but I still have never been able to do any of the OTA updates. It's starts and then fails.
Is there a way to unroot and the do an OTA update? I am trying to avoid Odin so I dont have to wipe everything and then have to start all over and adjust settings to my liking an also reinstall all of my apps.
I seen there is an option in the Super User app to "completely unroot and uninstall". Will choosing this option allow me to finally do OTA?
I've never installed a custom recovery or a custom rom so I don't know why OTA's always fail. At this point, I dont really care about having root since the only reason I previously wanted it was to remove at&t bloatware but I'd rather have OTA's at this point.
Any advice or direction would be greatly appreciated! Please speak slowly and in layman's terms as I am an old fart that is still a bit of a n00b, lol.
Thanks!!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
If you are on stock and have a valid AT&T SIM card in the device with full access to Wi-Fi and the AT&T network, you should be able to get an OTA update. Root could, however, indeed prevent an OTA update so your best bet may be to unroot. You could unroot and uninstall SuperSU from the SuperSU app just as you suggested. This should do it. However, if it doesn't and you would really want to avoid Odin and custom recovery, then you could do a 2-step manual update to 4.3 via stock recovery - first to 4.1.2 and then to 4.3. This will naturally update your phone to (full) stock 4.3 and we can then see if the phone will take the Kit-Kat OTA update from there.
You can see the instructions for the 2-step update via stock recovery in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2387423
1) Download the 2 zip files under update412.zip and update43.zip respectively to your computer
2) Copy the zip files to a good quality (micro) SD card
3) Place the card in your phone and boot to recovery mode by simultaneously holding down the Volume Up, Home and Power buttons
4) Hold the buttons until you see a blue message flash across the screen. Then release the Power button but continue to hold the Volume Up and Home button until you see the Android image appear. Then release the buttons
5) Use the volume up/down key to scroll to <mount from external storage> and the power button to select
6) Navigate to the first zip file (update412.zip) and install. Wait for installation to finish and your phone to reboot.
7) Complete set up. Check your phone settings. Then power off and reboot to recovery again.
8) Repeat the process for the second update file.
Well I tried the unroot feature in SuperSU and then uninstalled it.
I then tried the OTA update again and as usual, it failed about 30-40% in.
Ive never installed a custom recovery or a ROM so I don't get it. All I did was use Mr.Robinsons thread/directions on "how to root without tripping...." just for root only in the sticky.
I give up.:banghead:
Thank you though for responding. I may try the alternative way you suggested when I get time tomorrow and see what happens. Either that or screw it, im stuck with 4.1.1 and now I don't even have root. :banghead:
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
n01un0 said:
Well I tried the unroot feature in SuperSU and then uninstalled it.
I then tried the OTA update again and as usual, it failed about 30-40% in.
Ive never installed a custom recovery or a ROM so I don't get it. All I did was use Mr.Robinsons thread/directions on "how to root without tripping...." just for root only in the sticky.
I give up.:banghead:
Thank you though for responding. I may try the alternative way you suggested when I get time tomorrow and see what happens. Either that or screw it, im stuck with 4.1.1 and now I don't even have root. :banghead:
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
There have been several reports of failed OTA update so you may not be alone here. The process I advised is sure to take you to 4.3 JB without hassle. There is, of course, a manual update process from 4.3JB to 4.4.2 Kit-Kat (the latest OS). You will, however, require custom recovery for this ...
http://forum.xda-developers.com/showthread.php?t=2788357
Larry2999 said:
There have been several reports of failed OTA update so you may not be alone here. The process I advised is sure to take you to 4.3 JB without hassle. There is, of course, a manual update process from 4.3JB to 4.4.2 Kit-Kat (the latest OS). You will, however, require custom recovery for this ...
http://forum.xda-developers.com/showthread.php?t=2788357
Click to expand...
Click to collapse
Well I finally was able to update via OTA. I had to actually use Kies and reinstall firmware and then go through all the updates, starting from scratch and took forever. What an absolute pain in the ass. Plus, after all this work to go from 4.1 to 4.4..........I can't see where it was worth it. I am now going through the tedious task of setting up all the settings and widgets and everything else the way it was or the way I like. So much for Kies actually backing up and "restoring" anything.
I have a couple of questions though....
1. Now that I am on 4.4..........how do I root this version (that works). I was reading the thread saying to use towelroot but it's not confirmed if this is still working after I guess you do the OTA after a certain date and it's now patched. I DO NOT want to install custom roms or anything else. All I want is root so that I can remove the AT&T crapware that is now even worse with this phone on 4.4.
2. I have a battery percentage that is in the LEFT upper corner that I can not figure out what program or app it is associated with and I can not get rid of it. This is not the % indicator that is part of Android and next to the battery icon on the right which is on and is okay, this is one the left.
3. I hate the new PIN lockscreen because the keypad/numbers are so small compared to old version. Any way to fix this?
n01un0 said:
Well I finally was able to update via OTA. I had to actually use Kies and reinstall firmware and then go through all the updates, starting from scratch and took forever. What an absolute pain in the ass. Plus, after all this work to go from 4.1 to 4.4..........I can't see where it was worth it. I am now going through the tedious task of setting up all the settings and widgets and everything else the way it was or the way I like. So much for Kies actually backing up and "restoring" anything.
I have a couple of questions though....
1. Now that I am on 4.4..........how do I root this version (that works). I was reading the thread saying to use towelroot but it's not confirmed if this is still working after I guess you do the OTA after a certain date and it's now patched. I DO NOT want to install custom roms or anything else. All I want is root so that I can remove the AT&T crapware that is now even worse with this phone on 4.4.
2. I have a battery percentage that is in the LEFT upper corner that I can not figure out what program or app it is associated with and I can not get rid of it. This is not the % indicator that is part of Android and next to the battery icon on the right which is on and is okay, this is one the left.
3. I hate the new PIN lockscreen because the keypad/numbers are so small compared to old version. Any way to fix this?
Click to expand...
Click to collapse
Glad to know you were finally able to update. To try to answer your questions ....
1. Towelroot indeed comes well recommended for rooting on Kit Kat. You could, however, first try CF Auto Root which is one of the simplest approaches to rooting. If this doesn't work, you could try Option 2 in the thread below ... The thread also contains instructions to CF Auto Root.
http://forum.xda-developers.com/showthread.php?t=2538991
2. I'm not sure what that battery indicator is. I run 4.4.2 also on my S3 but I cant see this. Can you try a reset to see if it would go away?
3. You can try removing this from settings.
Im glad you asked this...
I too noticed Im on 4.1.1 stock but rooted. I wondered if you could go to 4.4.2 as my phone tried to OTA update on its own last week and failed. I did not know if it was worth it to try or not another way. About the only thing I see that would want me to try is Google Wallet now working with S3 on 4.4.2 without having to jump through all kinds of hoops, mine used to work fine, but now GW will not open up all the way. Im not sure its worth doing if I have to re setup all my crap as I will be upgrading my phone whenever I want, just holding out to see if the Nexus 6 will be out end of the year and on AT&T..Im not liking that all the new phones are getting so freakin big, the S3 is just right and I dont want to have to end up with a damn Note sized phone but that is a whole other discussion
If you're still on 4.1.1, BEFORE ANYTHING ELSE, UNLOCK YOUR PHONE IF HASN'T ALREADY
otherwise you'll regret it
then the rest, tbh, you don't need to unroot at all to upgrade, just flash the firmware in ODIN or recovery..
edit: nvm it seems like you've already upgrade yours to KitKat
I am very new at this, so I apologize in advance. I have the Virgin Mobile Galaxy S3 SPH-L710 running 4.3.
I simply wanted to root it so i could get rid of the bloatware and install Sixaxis and play emulators, but I didn't really know where to start, so I started looking around and found this
http://forum.xda-developers.com/showthread.php?t=2546505
So I basically did everything on there. I used Odin to install PhilZ Touch 6 Recovery (CWM 6.0.4.7) Did factory reset, wiped cache/dalvik. then installed the Odexed MK5 stock rooted zip, wifi fix zip, SuperSU update zip, and then the knox app remover zip.
Everything flashed just fine and it started right up. It had the Super Su app, but when I tried to install apps that need root permission it would say I don't have root access. I couldn't delete bloat apps and Super Su didn't show any apps and there isn't much I can do with it. So I guess it didn't work? Either way I wanted to try a different rom. Was gonna give Cyanogenmod a try. But every time I try to install it I get the little "Android bot laying on his back" thing and it says status 7. I tried to flash CM10, CM10.1, CM10.2, CM11. Nothing worked, same thing every time. Even tried different SD cards just in case of a mess up.
The phone itself works fine for now, calls and text work, wifi works. And it says there is an update, but when i hit accept, it reboots to recovery mode, does the "android fallen over" then boots back up.
Now here is my stupid part, I didn't backup the original cause the guide didn't say to. (Not blaming them, i should have know better) So I am assuming I have a messed up version of 4.3 and Cyanogenmod doesn't know what to do with me. I'm not sure. Here is where I am stumped and I have no idea where to go from here.
I posted this by accident in the wrong forum here
http://forum.xda-developers.com/galaxy-s3/help/tried-rooting-s3-didnt-help-t2879278
But someone decided to help me anyways (thank you so much). They said all i need to do is update my recovery. so I went here
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
And now I am running PhilZ 6.48.4, but I am still getting status 7 when I try to install CM11. I have tried CM10, CM10.1, CM10.2 and CM10.2.1 as well. I have been at this for days and i am going crazy because nothing I do seems to work. Does anyone have any idea what is wrong with my phone? Thank you so much in advance.
Mumonk said:
I am very new at this, so I apologize in advance. I have the Virgin Mobile Galaxy S3 SPH-L710 running 4.3.
I simply wanted to root it so i could get rid of the bloatware and install Sixaxis and play emulators, but I didn't really know where to start, so I started looking around and found this
http://forum.xda-developers.com/showthread.php?t=2546505
So I basically did everything on there. I used Odin to install PhilZ Touch 6 Recovery (CWM 6.0.4.7) Did factory reset, wiped cache/dalvik. then installed the Odexed MK5 stock rooted zip, wifi fix zip, SuperSU update zip, and then the knox app remover zip.
Everything flashed just fine and it started right up. It had the Super Su app, but when I tried to install apps that need root permission it would say I don't have root access. I couldn't delete bloat apps and Super Su didn't show any apps and there isn't much I can do with it. So I guess it didn't work? Either way I wanted to try a different rom. Was gonna give Cyanogenmod a try. But every time I try to install it I get the little "Android bot laying on his back" thing and it says status 7. I tried to flash CM10, CM10.1, CM10.2, CM11. Nothing worked, same thing every time. Even tried different SD cards just in case of a mess up.
The phone itself works fine for now, calls and text work, wifi works. And it says there is an update, but when i hit accept, it reboots to recovery mode, does the "android fallen over" then boots back up.
Now here is my stupid part, I didn't backup the original cause the guide didn't say to. (Not blaming them, i should have know better) So I am assuming I have a messed up version of 4.3 and Cyanogenmod doesn't know what to do with me. I'm not sure. Here is where I am stumped and I have no idea where to go from here.
I posted this by accident in the wrong forum here
http://forum.xda-developers.com/galaxy-s3/help/tried-rooting-s3-didnt-help-t2879278
But someone decided to help me anyways (thank you so much). They said all i need to do is update my recovery. so I went here
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
And now I am running PhilZ 6.48.4, but I am still getting status 7 when I try to install CM11. I have tried CM10, CM10.1, CM10.2 and CM10.2.1 as well. I have been at this for days and i am going crazy because nothing I do seems to work. Does anyone have any idea what is wrong with my phone? Thank you so much in advance.
Click to expand...
Click to collapse
only thing i can think of Is Odin the stock rom and start all over with trying to root......
I don't know how to explain it, but now everything is working perfectly....
I went back to the first site I posted about, Redownloaded everything, did the whole thing over, and root worked just fine. So I thought I would try my luck with CM11 and BOOM, working perfectly.
I have been tearing my hair out trying to get this to work for days and days and now, poof, it's all working. I dunno how, but I will take it. Thanks for the advice in both threads.
Mumonk said:
I don't know how to explain it, but now everything is working perfectly....
I went back to the first site I posted about, Redownloaded everything, did the whole thing over, and root worked just fine. So I thought I would try my luck with CM11 and BOOM, working perfectly.
I have been tearing my hair out trying to get this to work for days and days and now, poof, it's all working. I dunno how, but I will take it. Thanks for the advice in both threads.
Click to expand...
Click to collapse
Get towelroot, is an apk that root your phone with one click, after that just download your favorite super user from the market and done.
So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Well, then I wanted to get a custom ROM, so I flashed the Cyanogenmod 12, along with the component with it.
I found I didn't like it compared to my 5.0.2 Lolipop, and so I tried finding the stock ROM.
The gator download site everyone was showing refused to let me download anything, and just about all the ROMS seemed like they were from countries other than the U.S.
I searched for awhile, found nothing, then found a ROM called the Ironman Lolipop ROM, it was close enough to stock, so I flashed it.
Suddenly everything was normal, but then supersu needed binaries again, and after I flashed it again, it just stopped asking if it should grant permission, making the root useless.
Frustrated, I looked online again for ROMS, found a Canada one, decided to download, it would take two hours.
Well I'm not from Canada so I doubted it would work, and didn't want to wait two hours.
I decided to Flash back the Cyanogen.
Well unfortunately I went in and found out that I had deleted it earlier, whoops. And so my data wipe brought me back to Ironman ROM.
So, thinking that flashing to Iron Man screwed up my root I tried to re-root with Odin, the same way as the first.
It then had trouble booting, and when it did, it hung at the Samsung logo.
Now I've been stuck on this logo for about an hour, I can't turn it off. I'm assuming the only way to is to wait for it to run out of power.
I have been using TWRP this whole time.
I twice have backed up, and wiped data.
When I hit restore I saw no backups though, I'm not sure if they were for the ROM?
I don't know, I only have a year of experience.
Edit: I have an 8.1" T700 from Amazon.
pennylessz said:
So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Bla bla ......
Click to expand...
Click to collapse
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download): https://www.androidfilehost.com/?fid=24052804347761130
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
DUHAsianSKILLZ said:
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download):
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
Click to expand...
Click to collapse
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
pennylessz said:
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
Click to expand...
Click to collapse
In my files app, look for an folder called TWRP. Your backups are in there. To root simply install twrp and follow the twrp method to root. http://forum.xda-developers.com/showthread.php?p=59638836
You can delete your backups from within twrp. Just select restore, then the backup, then delete.