so, just wondering if anyone has took their desire apart? im not scared to do it particularly as im a PC technician, and take laptops to pieces quite often, and cant imagine it being harder, just smaller, but just wondering if anyone has done it?
my camera stopped working a few months back, no camera, no led, no matter what ROM i use. a logcat reports that it attempts to start the camera, but it doesnt respond, so im thinking something may be loose? if thats possible?
If you've ever disassembled HP laptop it would be easy as cake for you. It might be an issue with connectors because led is not working also, but you can always order a new cam since it's not that expensive.
nlooooo said:
If you've ever disassembled HP laptop it would be easy as cake for you. It might be an issue with connectors because led is not working also, but you can always order a new cam since it's not that expensive.
Click to expand...
Click to collapse
ok, i may have a little look later then
Nothing like a detailed teardown guide to help you out.
http://tjworld.net/blog/htc-desire-tear-down
stankyou said:
Nothing like a detailed teardown guide to help you out.
http://tjworld.net/blog/htc-desire-tear-down
Click to expand...
Click to collapse
excellent, i've just ordered my torx screw driver set, cheapo ebay ones, hopefully be here tuesday, then im at it!! haha
thanks for the tear down.
Let us now how it went!
Related
Hi all. In need of a bit of advice here. Hope this is in the right forum.
My beloved DHD has suffered from one too many falls. Despite being protected in an Otterbox Commuter case, he now lies on his deathbed. Even though I was considering an upgrade, I'm thinking I might want to stretch out his life for as long as possible instead. So I've come here to ask for repair advice.
- The phone seems structurally sound from the outside, no damage besides minor aesthetic scratches from before the phone was protected by the Otterbox.
- It appears to boot. Makes the vibration noise etc. Heck the alarm even went off the other morning, at the set time of 0630.
- Screen does not function at all. Lifeless. But not broken in any way externally. Because of this, had to pull the battery to shut the alarm off.
- When plugged in to charge, charging light indicator does not illuminate.
Any ideas?
Sent from my nipple running windows 95 NT.
Cheers, although I'm gonna try a different approach for now.
Any ideas? Can anyone point me in the right direction of some advice?
Sounds like 2 things. Broken lcd and a broken charging port. It wouldn't be worth repairing. You could buy one second hand on ebay for aboot £120.
Sent from my nipple running windows 95 NT.
Thanks for that. Considering trying to sell it broken, for parts. Only thing that concerns me is any sensitive data that may be readily accessed by someone who knows how to get to it.
Is there a way to wipe it?
You could use another dhd with the same firmware and copy the key/button presses and reset it in bootloader mode.
Sent from my laser emitting mammary glands.
Could also be that the connector for the screen has been dislodged due to being drop to many times you mite try opening it up and see if it is that.
lincolnep said:
Could also be that the connector for the screen has been dislodged due to being drop to many times you mite try opening it up and see if it is that.
Click to expand...
Click to collapse
Hi, thanks for the response. So I assume you're referring to this part here?
http://www.parts4repair.com/htc-desire-hd-lcd-screen-fpc-connector/
Seen in this disassembly video from the 3:05 minute mark?
http://www.youtube.com/watch?v=JfatoeWbMRk
bump...
I have a problem similar to yours. But in my case, I'd turned the phone off to go to the cinema and the LCD and touch never turned on again.
In order to erase your data, did you try overwriting a stock rom? (In case it's just the charging LED that is broken)
That sucks! Self detonating phone. Does yours still vibrate and 'turn on'?
Haven't actually managed to clear the data. I'm ordering this part here (http://www.parts4repair.com/htc-desire-hd-lcd-screen-fpc-connector/) and I'm going to attempt to pull it apart and fix it.
If I can get it to work again I'll sell the One V I'm using and go back to the old faithful!
Well this saves me from starting a new thread haha
Anyway i am having the exact same problem as you have.
My dad brought home a Desire HD from work wich was not working so i am trying to fix it.
The phone boots, it vibrates ones and after a minute it makes the boot sound.
But nothing responses and the lights wont turn on.
Also no charging light..
Also it does not charge but usb does connect.
Could this be the FPC connector or the screen?
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
suitup said:
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
no clean flux core solder would work best, preferably something very thin (about .015"). A small bottle of noclean flux would also help and you probably will need lead free solder as that is likely what they used on the board to begin with, and lead and leadfree dont typically mix as well.
Thanks for the quick reply...
Something like this?
http://www.oritech.com.au/productDetail.aspx?productID=23244
What sort of iron would be suited? Would any of these suit?
http://www.oritech.com.au/categories.aspx?categoryID=321
Would you say it'd be a difficult process? I've soldered before, but a that was a while ago in high school...
Also the cost of all this equipment will far outweigh the cost of the $3 FPC connector spare!
suitup said:
Thanks for the quick reply...
Something like this?
http://www.oritech.com.au/productDetail.aspx?productID=23244
What sort of iron would be suited? Would any of these suit?
http://www.oritech.com.au/categories.aspx?categoryID=321
Would you say it'd be a difficult process? I've soldered before, but a that was a while ago in high school...
Also the cost of all this equipment will far outweigh the cost of the $3 FPC connector spare!
Click to expand...
Click to collapse
yes, those should both work fine. ya it is costly for equipment. i have a edsyn iron i use at home and solder i get from work. i would say it can be tricky, i havent seen the connector but im sure its similar to other inline ribbon connectors. remember, short burst soldering, heating it for too long will take the pad off the pcb, and repairing THAT can become very difficult.
suitup said:
Hmmm...interesting, exact same issue as mine.
Well, I've ordered the FPC connector replacement part I linked above...going to attempt to play around with it when it arrives and see if I can breathe new life into the phone. So I can tell you how that goes...
Although:
1. Would the charging light and screen problem be connected? Is this feasible? Or does it suggest something else is likely shot?
2. I believe the FPC connector requires a solder to replace. This could be a bit ambitious on my part to attempt to repair...any ideas on what sort of a solder would be suitable?
Sent from my HTC One V using xda premium
Click to expand...
Click to collapse
Thanks. We have a spare DHD with broken glass here wich my sister is using unter her SGS is back from repair. Will swap the motherboard when her phone is back.
Sent from my HTC Vision using xda premium
Hi, wondered if anyone can offer any advice.
Knocked a cup of coffee over yesterday which covered my gnex. Now it wont charge.
From what I can see without dismantling the thing, its got some of that nasty greeny white stuff on the charging port.
Does this mean its a goner?
Thanks in advance
may have to buy a new charging port or scrap the errsion off
are they easy to fit?
honestly cant tell you never had to . i have dropped of messed up my gnex since i got it 6months ago
Ok, will take it apart and have a look. Cheers anyway
would you mid telling us if changing the charging port is a hassle once you are done please
Yeah will do. I'm lucky enough to know a Sammy engineer who might be able to help too. Cheers
I've read its relatively easy, but just a hassle to make sure everything is connected right so the darn thing turns on
Take the entire phone apart and wipe it down in rubbing alcohol. Reassemble, and your good to go
Should work like a charm
Sent from my Nexus 4 @1.67 GHz on Stock 4.2.2
Hello!
I just finish to "unglued" my digitizer cable on my note 2 ,
Please, just take a look at the picture, maybe can I do something to put it back.
Look like unglued..have you any idea if that flex cable it's glued or soldered ?
Thank you very much.
Wow.. I just did the exact same thing yesterday.. same spot on the cable and everything. I did it when I was replacing the glass.. I've tried taping it back.. and now I've tried gluing it , the touch kinda works but really inconsistent and annoying. I've spent way too much time trying to fix it and think I'm just gonna sell as parts now. What did you end up doing? Any luck getting it reattached? If you were successful please let me know what you did.
tri0xinn said:
Wow.. I just did the exact same thing yesterday.. same spot on the cable and everything. I did it when I was replacing the glass.. I've tried taping it back.. and now I've tried gluing it , the touch kinda works but really inconsistent and annoying. I've spent way too much time trying to fix it and think I'm just gonna sell as parts now. What did you end up doing? Any luck getting it reattached? If you were successful please let me know what you did.
Click to expand...
Click to collapse
For me, was no way to put back this flex cable... and I think its close to impossible to make something good with this display.
I just stored that display ....for don't throw it.
Good luck!
this is a usual ribbon cable. i teared mine replacing the screen... will try to replace it and report back.
maybe it will require light smd oven soldering and that will suck big time. maybe i can just pressure it down somehow. your cases are much better, you still have the original cable and half of it is already soldered making it much easier to solder the rest.
gcbxda said:
this is a usual ribbon cable. i teared mine replacing the screen... will try to replace it and report back.
maybe it will require light smd oven soldering and that will suck big time. maybe i can just pressure it down somehow. your cases are much better, you still have the original cable and half of it is already soldered making it much easier to solder the rest.
Click to expand...
Click to collapse
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Goathier said:
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Click to expand...
Click to collapse
probably. i hope you haven't glued the glass already
edit, actually that one probably have that ribon cable already attached. i can only see the plug that clips on the motherboard(?)... not sure that is what you want
Goathier said:
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Click to expand...
Click to collapse
thats not the same part, the part u listed on ebay is for the stylus. U can easily tell its not the same part as shown in the original post. Check out this youtube video at the 20:50 minute mark, it will show u the exact parts and u can tell. Youtube: https://www.youtube.com/watch?v=bxgZeb5QytM
Unfortunatly the part the original poster pictured is part of the digitizer and is near impossible to fix once ripped. all ive been able to find online is that ribbon cable being sold with the digitizer itself. If anyone else actually finds the part shown in the original post please do post back.
I have a huge problem, basically I was sick and tired of my black housing for the phone, so I ordered the white one from ebay. I was so happy it came that I forgot to shut down the phone, well during half way of the work, while I was trying to pry it open I remembered and turned it on and it worked I opened it a bit more open and it suddenly went black and since then everything is working except the LCD.
I have no idea whats the problem is the LCD broke or what?
Also when it shut down and me trying to reconnect the LCD flat cable to see if thats the problem I was nervous and did that which you see in the picture. Now my issue is what if I buy a new screen connect it and it doesn't work because the FPC connector?
Silthrax said:
I have a huge problem, basically I was sick and tired of my black housing for the phone, so I ordered the white one from ebay. I was so happy it came that I forgot to shut down the phone, well during half way of the work, while I was trying to pry it open I remembered and turned it on and it worked I opened it a bit more open and it suddenly went black and since then everything is working except the LCD.
I have no idea whats the problem is the LCD broke or what?
Also when it shut down and me trying to reconnect the LCD flat cable to see if thats the problem I was nervous and did that which you see in the picture. Now my issue is what if I buy a new screen connect it and it doesn't work because the FPC connector?
Click to expand...
Click to collapse
The connection pins themselves do not look damaged, on the plastic shroud. The socket should work fine.
It's a little hard to make out fine detail in the pic...take a magnifying glass to it and check for cracks or splits in the pins.
Tigerlight said:
The connection pins themselves do not look damaged, on the plastic shroud. The socket should work fine.
Click to expand...
Click to collapse
Hmm it seems like it goes one small one then longer one, its hard to see from he picture but I think two of the longer ones are missing. And what should be the problem with the LCD because that happened before I damaged the socket.
Between thank you for the fast reply.
Silthrax said:
Hmm it seems like it goes one small one then longer one, its hard to see from he picture but I think two of the longer ones are missing. And what should be the problem with the LCD because that happened before I damaged the socket.
Between thank you for the fast reply.
Click to expand...
Click to collapse
Well I don't see any missing pins, but you'll have a better view.
As for you LCD...no idea. Generally it's a good idea to turn everything off before you open electrical equipment. You could have caused a short in the process of opening it live.
Tigerlight said:
Well I don't see any missing pins, but you'll have a better view.
As for you LCD...no idea. Generally it's a good idea to turn everything off before you open electrical equipment. You could have caused a short in the process of opening it live.
Click to expand...
Click to collapse
Would that be on the motherboard or the LCD, basically should I bother repairing it or just sell it for spare parts thats my issue right now.
Silthrax said:
Would that be on the motherboard or the LCD, basically should I bother repairing it or just sell it for spare parts thats my issue right now.
Click to expand...
Click to collapse
If you try to power it on does the vibrate activate...basically does it do everything you'd expect EXCEPT the screen doesn't work or does it do nothing at all?
Tigerlight said:
If you try to power it on does the vibrate activate...basically does it do everything you'd expect EXCEPT the screen doesn't work or does it do nothing at all?
Click to expand...
Click to collapse
Like I said earlier everything works, I can still receive SMS, phone calls (I can answer them since the digitizer works), e-mails, Facebook msgs, vibrations, sound, microphone... Everything works except the LCD.
Silthrax said:
Like I said earlier everything works, I can still receive SMS, phone calls (I can answer them since the digitizer works), e-mails, Facebook msgs, vibrations, sound, microphone... Everything works except the LCD.
Click to expand...
Click to collapse
You might try replacing the LCD and hope you haven't damaged the connector. If you have, a self-repair is unlikely given its size and that of the pins.
Or you dump it and buy a new phone.
Either way it's gonna cost you money. The first is cheaper but may not work.
I think that's your only options.
Yeah I knew from the start it was gonna cost me money, but I wanted the cheapest way out
Thanks a lot for the help I think I am gonna try to fix it. Get some experience while doing it too
Silthrax said:
Yeah I knew from the start it was gonna cost me money, but I wanted the cheapest way out
Thanks a lot for the help I think I am gonna try to fix it. Get some experience while doing it too
Click to expand...
Click to collapse
Hey did you ever figure out the connector issue? Same problem
Anyone tried doing it themselves or request support services to do it yet?
Cheers
i can confirm that with patience it is indeed doable, i took mine apart last night thinking the battery was bloated and causing pressure ripples on my screen (too bad it wasnt the cause), you just have to follow the guide on ifixit or find one on youtube, taking the metal back apart was the harder part as i didnt have the necessary tools,
dantemetaphor said:
i can confirm that with patience it is indeed doable, i took mine apart last night thinking the battery was bloated and causing pressure ripples on my screen (too bad it wasnt the cause), you just have to follow the guide on ifixit or find one on youtube, taking the metal back apart was the harder part as i didnt have the necessary tools,
Click to expand...
Click to collapse
You were able to glue it back together?
I also wanted to know how much it would cost to make support services do it. Anyone?
Badelhas said:
You were able to glue it back together?
I also wanted to know how much it would cost to make support services do it. Anyone?
Click to expand...
Click to collapse
Definitely doable. I did this not too long ago. Replaced the battery, Main camera, and microusb/headphone jack.
If you have the money to get someone official to do it, do it that way. I ended up unknowingly breaking my GPS (tiny copper piece that touches the case broke off) and the compass (i think this is related to that, if anyone has an idea let me know) and my nfc doesnt turn on (i have no idea about this, everything is plugged in as far as i know. agin if anyone could help lol)
A few months ago i changed my vibration motor. For this change i have to dismantle the whole phone because the Motor sits behind the Mainboard. When the Mainboard was out of the phone, i checked if my battery was bloated or so. But it looks good and so i didn't change it. After reassemble the phone everything works as it should.
So changing the battery is definetly doable, but you need the proper tools, a video guide, time and a calm hand.
Greetings
Wodan