[NEED HELP] Flashing Firmware!!! - Desire Q&A, Help & Troubleshooting

Goooood Morning everybody
I have the following Problem: My Desire doesn't boot, so I want to flash a new Firmware (or an older, but an original ). When I use the RUU.exe it works until it says Reboot into Bootloader, because then it turns off, vibrates seven times and thats all. So I get an Error 171 after "Waiting for Bootloader". So i tried to flash it with an PB99IMG.zip but it just works until it says "Checking PB99IMG.zip". After that it goes back into the normal HBOOT menu.
I REALLY NEED YOUR HELP!!!
Thanks in Advance, mrlollog!

mrlollog said:
Goooood Morning everybody
I have the following Problem: My Desire doesn't boot, so I want to flash a new Firmware (or an older, but an original ). When I use the RUU.exe it works until it says Reboot into Bootloader, because then it turns off, vibrates seven times and thats all. So I get an Error 171 after "Waiting for Bootloader". So i tried to flash it with an PB99IMG.zip but it just works until it says "Checking PB99IMG.zip". After that it goes back into the normal HBOOT menu.
I REALLY NEED YOUR HELP!!!
Thanks in Advance, mrlollog!
Click to expand...
Click to collapse
First, do you have boitloader drivers installed? If not you need to install htc sync prior to run RUU.
Also, which RUU did you run? Not all af them are compatible with your device.
Sent from my HTC Desire using flashes and thunders

nlooooo said:
First, do you have boitloader drivers installed? If not you need to install htc sync prior to run RUU.
Also, which RUU did you run? Not all af them are compatible with your device.
Sent from my HTC Desire using flashes and thunders
Click to expand...
Click to collapse
Does HTC Sync install the drivers from an phone which doesnt boot and turned off? :O
I tried the following:
RUU_HTC Desire Android 2.3 Upgrade (Gingerbread)
RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865
Now I'm downloading this one:
RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed.exe
Is that right?
BTW: I installed some Drivers I downloaded anywhere, already forgot which ones

mrlollog said:
Does HTC Sync install the drivers from an phone which doesnt boot and turned off? :O
I tried the following:
RUU_HTC Desire Android 2.3 Upgrade (Gingerbread)
RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865
Now I'm downloading this one:
RUU_Bravo_Froyo_HTC_WWE_2_29_405_5_Radio_32_49_00_32U_5_11_05_27_release_159811_signed.exe
Is that right?
BTW: I installed some Drivers I downloaded anywhere, already forgot which ones
Click to expand...
Click to collapse
RUU depends on what model and where you bought it which I can't tell you because you bought it. 2.3 RUU is compatible with all versions so it should work.
And about htc sync it installs drivers depending on state of your phone (powered on, bootloader, fastboot) it has all of them and it will install them when you connect the phone in these states. The ones you don't have are bootloader drivers and they are critical for RUU to complete. Just install htc sync and run 2.3 upgrade, when the phone reboots PC will install proper drivers for bootloader. You have an instalation guide inside 2.3 upgrade pack.
Sent from my HTC Desire using flashes and thunders

nlooooo said:
RUU depends on what model and where you bought it which I can't tell you because you bought it. 2.3 RUU is compatible with all versions so it should work.
And about htc sync it installs drivers depending on state of your phone (powered on, bootloader, fastboot) it has all of them and it will install them when you connect the phone in these states. The ones you don't have are bootloader drivers and they are critical for RUU to complete. Just install htc sync and run 2.3 upgrade, when the phone reboots PC will install proper drivers for bootloader. You have an instalation guide inside 2.3 upgrade pack.
Sent from my HTC Desire using flashes and thunders
Click to expand...
Click to collapse
Ok, now my Upgrade starts but ends directly after starting with the signature error 132
Do you know anything about how to fix this?

mrlollog said:
Ok, now my Upgrade starts but ends directly after starting with the signature error 132
Do you know anything about how to fix this?
Click to expand...
Click to collapse
How did you try, .zip on sd method or unpacking and running RUU from the package on your PC?

nlooooo said:
How did you try, .zip on sd method or unpacking and running RUU from the package on your PC?
Click to expand...
Click to collapse
Running the RUU ends with the Signature Error and when I try to flash it via PB99IMG.zip it stucks at "Checking PB99IMG.zip" or returns to the normal HBOOT menu.
BTW: I have HBOOT 0.80.0000

mrlollog said:
Ok, now my Upgrade starts but ends directly after starting with the signature error 132
Do you know anything about how to fix this?
Click to expand...
Click to collapse
mrlollog said:
Running the RUU ends with the Signature Error and when I try to flash it via PB99IMG.zip it stucks at "Checking PB99IMG.zip" or returns to the normal HBOOT menu.
BTW: I have HBOOT 0.80.0000
Click to expand...
Click to collapse
Can you post all you have written in bootloader?

nlooooo said:
Can you post all you have written in bootloader?
Click to expand...
Click to collapse
BRAVO EVT SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.10.05.17_2
Mar 29 2010,21:34:33

What did you use for PB99IMG.zip?
Did you extract rom.zip from RUU?
And again which drivers do you have and where have you find 2.3 upgrade?

nlooooo said:
What did you use for PB99IMG.zip?
Did you extract rom.zip from RUU?
And again which drivers do you have and where have you find 2.3 upgrade?
Click to expand...
Click to collapse
I extracted the first RUU I listed (Gingerbread) and have installed the Fastboot Drivers and HTCSync.
: ...and android sdk of course...

You don't need both drivers maybe they're making problems.
And again: PB99IMG.zip, what did you use, do you know that you have to extract rom.zip FROM RUU.exe?

nlooooo said:
You don't need both drivers maybe they're making problems.
And again: PB99IMG.zip, what did you use, do you know that you have to extract rom.zip FROM RUU.exe?
Click to expand...
Click to collapse
yes that's what i did, i extracted the rom.zip from the first gingebread RUU i posted.
The driver aren't in conflict because i tried with both single drivers and with both at the same time.

Then just try again and again with RUU.
But since you have an old hboot (that should be overrun by RUU) try with goldcard and WWE RUU, you may have luck. I don't know what else to say to you .
---------- Post added at 07:25 PM ---------- Previous post was at 06:49 PM ----------
Now I talked to one mate that had some problems like your, he put his phone in freezer for some time and after that RUU done it's job.

Related

[Q] Bricked

i have htc desire i updated it to latest update downloaded directly from Wifi but i disabled the signature toogle and there u go now my mobile is restarting again and again :
This is the information on bootloader:
Hboot : 0.93
Radio 0-5.22.05.27
I downloaded pre rooted foryo put it on sd and renamed it update.zip but wen i restore i get error of signature failure
What should i do now ??
msamiullah said:
i have htc desire i updated it to latest update downloaded directly from Wifi but i disabled the signature toogle and there u go now my mobile is restarting again and again :
This is the information on bootloader:
Hboot : 0.93
Radio 0-5.22.05.27
I downloaded pre rooted foryo put it on sd and renamed it update.zip but wen i restore i get error of signature failure
What should i do now ??
Click to expand...
Click to collapse
Have you tried a full wipe after the update?
yup i wiped the data but still !! its restarting on boot process !!
cjm1979 said:
Have you tried a full wipe after the update?
Click to expand...
Click to collapse
well i dnt understand wat u mean by full wipe i had selected the option of Clear Storage in bootloader !!! is it the full wipe ?
msamiullah said:
yup i wiped the data but still !! its restarting on boot process !!
Click to expand...
Click to collapse
Are you able to run an Ruu official rom while connected to a pc?
cjm1979 said:
Are you able to run an Ruu official rom while connected to a pc?
Click to expand...
Click to collapse
well i ran the exe but it does not recognize my mobile !!! becuz i thnk its not recognizing becuz m on bootloader screen !!
msamiullah said:
i have htc desire i updated it to latest update downloaded directly from Wifi but i disabled the signature toogle and there u go now my mobile is restarting again and again :
This is the information on bootloader:
Hboot : 0.93
Radio 0-5.22.05.27
I downloaded pre rooted foryo put it on sd and renamed it update.zip but wen i restore i get error of signature failure
What should i do now ??
Click to expand...
Click to collapse
I would try redownloading the ROM (from PC), place on SD card, go into recovery, full wipe from recovery, flash zip file from recovery.
Rumball said:
I would try redownloading the ROM (from PC), place on SD card, go into recovery, full wipe from recovery, flash zip file from recovery.
Click to expand...
Click to collapse
but recovery is giving me the error of signature failure.
Did you try and apply an update to a rooted phone????
Well, if you're on bootloader screen it usually doesnt recognize your phone.
Last time I flashed a RUU i used fastboot mode. Start your phone with the "back key" held. Then start the RUU.
If you get something like a Model ID Error then, you will have to create a Goldcard to apply the RUU.
CAUTION: Before you flash any RUU, check if it's compatible with your SLCD or AMOLED Device. SLCD Devices are incompatible with certain RUUs, flashing a wrong one results in a semi-brick (display not working, but ROM functioning).
You must be aware of having the correct RUU.then try to enter fastboot, when it is loaded, plug in your cable, you must see that it turns to 'hboot usb plug'. If it does so, you can flash the original RUU, if it is the right one
Scray said:
Well, if you're on bootloader screen it usually doesnt recognize your phone.
Last time I flashed a RUU i used fastboot mode. Start your phone with the "back key" held. Then start the RUU.
If you get something like a Model ID Error then, you will have to create a Goldcard to apply the RUU.
CAUTION: Before you flash any RUU, check if it's compatible with your SLCD or AMOLED Device. SLCD Devices are incompatible with certain RUUs, flashing a wrong one results in a semi-brick (display not working, but ROM functioning).
Click to expand...
Click to collapse
I tried to apply ruu it went all well but after some process like 30 % it gave me the error of wronge bootloader version
Bizzy_B said:
You must be aware of having the correct RUU.then try to enter fastboot, when it is loaded, plug in your cable, you must see that it turns to 'hboot usb plug'. If it does so, you can flash the original RUU, if it is the right one
Click to expand...
Click to collapse
can u give me the link of latest ruu for htc desire
hay guyz got it working !!! by latest version of RUU for Desire !! thnx a lot !!
GOT latest version from here !!
http://forum.xda-developers.com/showthread.php?t=869048&page=2
THNX Again !!
msamiullah said:
I tried to apply ruu it went all well but after some process like 30 % it gave me the error of wronge bootloader version
Click to expand...
Click to collapse
Hmm...Somehow the newest post was hidden from me..Glad you solved it.
Glad i could help you, i hate bricked desires, had a similar problem once...

Desire not working after install RUU

hello
My htc desire stop working after i install this RUU RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe from here http://forum.xda-developers.com/showthread.php?t=695667.
The phone boots, shows the HTC logo and then the screen becomes black with two white stripes in left and right side. It seems that the phone boot coorrectly but because the screen is black i can't do anything.
I need your help
Thanks
eburnay said:
hello
My htc desire stop working after i install this RUU RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe from here http://forum.xda-developers.com/showthread.php?t=695667.
The phone boots, shows the HTC logo and then the screen becomes black with two white stripes in left and right side. It seems that the phone boot coorrectly but because the screen is black i can't do anything.
I need your help
Thanks
Click to expand...
Click to collapse
What kind of RUU did you flash?! That things pre-historic. Go on my guide, find the 2.3 RUU from
Resources and flash that.
I try that RUU because I want to downgrade my hboot version in order to root the phone with revolutionary.
I'm new in this stuff.
I'm downloading RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release but I think that this RUU will not work.
I will keep you posted
Thanks
I tried to install RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed and doen't work. It says that there is no phone connected.
I need your help. I don't want an expensive dead HTC
I have also tried this RUU RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but doesn't work either. "ERROR[170]: USB CONNECTION ERROR"
Look on my guide. Extract the rom.zip, rename to PB99IMG.zip, put on root of sd-card, boot into hboot, select update.
And before you ask me how to do it look on my guide.
It works
Thanks a lot
Now i have a ALphaRev bootloader
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
Do you know any tutorial on how to root and install a ROM?
I've tried several but nothing works
Thanks
eburnay said:
It works
Thanks a lot
Now i have a ALphaRev bootloader
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
Do you know any tutorial on how to root and install a ROM?
I've tried several but nothing works
Thanks
Click to expand...
Click to collapse
With S-OFF you don't need root to start flashing.
Look on my guide on how to flash recovery, then backup your current ROM, full wipe, and flash a new one.
Alternatively (much easier), just install this app and it flashes recovery for you, then backup, wipe and flash a ROM.
Same problem
bortak said:
What kind of RUU did you flash?! That things pre-historic. Go on my guide, find the 2.3 RUU from
Resources and flash that.
Click to expand...
Click to collapse
bortak said:
Look on my guide. Extract the rom.zip, rename to PB99IMG.zip, put on root of sd-card, boot into hboot, select update.
And before you ask me how to do it look on my guide.
Click to expand...
Click to collapse
-----------------------------------------------------------------------
Hi
I have the same problem. May i know how to find the details solution form your guide?
Many thanks!

Bravo with SHIP S-OFF unable to flash with fastboot

Hi all, after reading through several tutorials including Bortak's and asking questions in chat rooms, I finally felt like I need to reach out for help on the forum. I have a HTC Desire that was hanging on white HTC screen and had no recovery. I have flashed with AlphaRev HBOOT and it now shows the following in Bootloader:
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
I have tried flashing CWM recovery but when I try to load recovery from the Bootloader it just vibrates 7 times and then vibrates. I just want to get the phone working again, but I am not sure what I need to do or what ROM/RUU I need to use. Also, when I try to flash from fastboot it gives me: "FAILED (remote: not allowed)"
Is this something to do with SHIP S-OFF and not ENG S-OFF. I think getting recovery working is the first step but I am lost.
Any help would be highly appreciated.
what did u, or were u trying to do before this happened?
Sent from my HTC Desire
jmcclue said:
what did u, or were u trying to do before this happened?
Sent from my HTC Desire
Click to expand...
Click to collapse
I bought the device like this with SHIP S-OFF. It was fine, and then it started hanging at the white HTC screen, and would only boot up correctly once every handful of times. I assumed the ROM was unstable and wanted to flash a stable version of CM 7. However when I realised that there was no recovery I resorted to Fastboot. I then flashed an RUU zip (gingerbread) via fastboot and now it wont start at all, instead it keeps restarting. I have flashed CWM via fastboot to try and get recovery working but when I select recovery from bootloader it just vibrates 7 times.
My objective now - just to get the phone working again
when u hold volume down + power, what hboot is in the bootloader? (pink at top) also u could tried android flasher or the PB899IMG method to install recovery.
Sent from my HTC Desire
jmcclue said:
when u hold volume down + power, what hboot is in the bootloader? (pink at top) also u could tried android flasher or the PB899IMG method to install recovery.
Sent from my HTC Desire
Click to expand...
Click to collapse
The pink at the top is "--- Alpharev ---". I did try to use Android flasher to flash recovery in fastboot mode but it says I need ENG bootloader or something.
oh rite. im not really sure im afraid, but i think u will have to use the bravo_downgrade.img from Alpharev or the PB99IMG_downgrade if u cant use fastboot commands then run a ruu. i think when u tried the ruu and it failed it was because ur hboot is 6.93.1002 which cant be overwritten by an ruu. The ruu to use would be the exact 1 for ur phone - devise, brand, region ect or use the 2.3 upgrade which is for all and can be found at HTCDev/ kernel source code/ see downloads/ filter by device (desire) below check other then find files, then ul see 2.3 ruu upgrade..
just wait and maybe some1 can confirm this first before trying it or if they have an answer
jmcclue said:
oh rite. im not really sure im afraid, but i think u will have to use the bravo_downgrade.img from Alpharev or the PB99IMG_downgrade if u cant use fastboot commands then run a ruu. i think when u tried the ruu and it failed it was because ur hboot is 6.93.1002 which cant be overwritten by an ruu. The ruu to use would be the exact 1 for ur phone - devise, brand, region ect or use the 2.3 upgrade which is for all and can be found at HTCDev/ kernel source code/ see downloads/ filter by device (desire) below check other then find files, then ul see 2.3 ruu upgrade..
just wait and maybe some1 can confirm this first before trying it or if they have an answer
Click to expand...
Click to collapse
Do you think the fact it is SHIP S-OFF and not ENG S-OFF have anything to do with it?
jrahmad98 said:
Do you think the fact it is SHIP S-OFF and not ENG S-OFF have anything to do with it?
Click to expand...
Click to collapse
really dont know, my bootloader is the same as urs, ship s-off. u could try installing recovery as PB99IMG
link below and just follow instructions. hopefully it will work, it will say update recovery, vol up for yes then it will ask to reboot? vol down for no then try get into recovery
Sent from my HTC Desire
http://www.google.ie/url?sa=t&sourc...loGwDw&usg=AFQjCNEUGZl30YGTkx5scB6jgMA9qi5a9g
Sent from my HTC Desire
check out bortak's guide. for what i know (since surfing xda), it is wrong to flash a ruu while you have a 'custom' hboot (the hboot is very important. you can see what hboot you have on the pink line. in fastboot screen. is it Alpharev Data++, Alpharev cm7r2?) but, as long as the screen of the phone is 'alive', there's always a solution.
for more info, go here: http://forum.xda-developers.com/showthread.php?p=17829936
good luck.
Sent from my HTC Desire using xda app-developers app
It's not a problem to run RUU if you have custom hboot as long as it have stock partition table. Just try to flash downgrade from alpharev site and then run RUU from your PC.
nlooooo said:
It's not a problem to run RUU if you have custom hboot as long as it have stock partition table. Just try to flash downgrade from alpharev site and then run RUU from your PC.
Click to expand...
Click to collapse
OK so I downgraded the HBOOT using the downgrader from AlphaRev, then I ran the RUU for Android 2.3, but it still wont boot up. White screen appears for about 10 seconds then keeps restarting. Also the same happens when I try to open recovery from Bootloader. After running the RUU my bootloader shows the following:
BRAVO PVT1 SHIP S-OFF
HBOOT-1.02.0001
MICROP-031d
RADIO-5.17.05.23
Any suggestions what to do next?
strange, when i used the downgrader (PB99IMG) it made me s-on then i ran the 2.3 ruu upgrade then used revolutionay to s-off. (dont ask why) lol
edit: when i used the 2.3 ruu i extracted the rom.zip and renamed it PB99IMG and ran it that way
Sent from my HTC Desire
jmcclue said:
strange, when i used the downgrader (PB99IMG) it made me s-on then i ran the 2.3 ruu upgrade then used revolutionay to s-off. (dont ask why) lol
Sent from my HTC Desire
Click to expand...
Click to collapse
the PB99IMG method didnt work for me - it didnt prompt me to update at all. It just keeps restarting at the HTC screen. Fastboot is still not letting me flash anything its saying FAILED: (remote: not allowed). Recovery is not working - is there anything else I can try?
jrahmad98 said:
the PB99IMG method didnt work for me - it didnt prompt me to update at all. It just keeps restarting at the HTC screen. Fastboot is still not letting me flash anything its saying FAILED: (remote: not allowed). Recovery is not working - is there anything else I can try?
Click to expand...
Click to collapse
thats very strange PB99IMG did not work. if "PB99IMG.zip" is on ur sdcard (not in any folder) bootloader should load it. did u rename it to PB99IMG.zip?
jmcclue said:
thats very strange PB99IMG did not work. if "PB99IMG.zip" is on ur sdcard (not in any folder) bootloader should load it. did u rename it to PB99IMG.zip?
Click to expand...
Click to collapse
Yes, for some reason doesnt pick it up. I'm really unsure what to do. I cant flash using Fastboot, and after flashing the RUU I have lost the AlphaRev HBOOT and I cant get recovery. Can it really be bricked?
jrahmad98 said:
Yes, for some reason doesnt pick it up. I'm really unsure what to do. I cant flash using Fastboot, and after flashing the RUU I have lost the AlphaRev HBOOT and I cant get recovery. Can it really be bricked?
Click to expand...
Click to collapse
put this in ur sdcard then from phone off hold volume down + power n see if it finds it
(4ext recovery)
jrahmad98 said:
I bought the device like this with SHIP S-OFF. It was fine, and then it started hanging at the white HTC screen, and would only boot up correctly once every handful of times. I assumed the ROM was unstable and wanted to flash a stable version of CM 7. However when I realised that there was no recovery I resorted to Fastboot. I then flashed an RUU zip (gingerbread) via fastboot and now it wont start at all, instead it keeps restarting. I have flashed CWM via fastboot to try and get recovery working but when I select recovery from bootloader it just vibrates 7 times.
My objective now - just to get the phone working again
Click to expand...
Click to collapse
I am not familiar with this method of running a RUU by flashing it as a zip from fastboot. The standard method is to execute the RUU.exe from PC while the device is in Fastboot mode. Could this be the root problem ?

RUU Flash Error

HI everybody,
i want to flash the original RUU, but i've got one problem, after i've tried to flash the Froyo RUU, for the german O2 provider, i get the error 110, i forget to flash the stock Hboot...
The bootscreen is black with the htc logo and for triangle in the corner...i can't boot recovery, the only thing i get to see is this:
(Screenshot)
https://dl.dropbox.com/u/72524848/CIMG1464.JPG
could someone help me?
Thanks, and sorry for my english
ItaloStylo said:
HI everybody,
i want to flash the original RUU, but i've got one problem, after i've tried to flash the Froyo RUU, for the german O2 provider, i get the error 110, i forget to flash the stock Hboot...
The bootscreen is black with the htc logo and for triangle in the corner...i can't boot recovery, the only thing i get to see is this:
(Screenshot)
https://dl.dropbox.com/u/72524848/CIMG1464.JPG
could someone help me?
Thanks, and sorry for my english
Click to expand...
Click to collapse
Try 2.3 ruu from htcdev.com
Gingerbread..... try multiple times. Ensure data cable is ok and proper drivers installed through htc sync.
Oh, by the way, wrong place to post a question.
Regards
Yasir
Regards
Sent from my HTC Desire using xda app-developers app
1) Download the "downgrade" PB99IMG file from http://alpharev.nl/.
2) Place it in your root of the sdcard.
3) Boot into bootloader (vol down + power)
4) If ask to install update, select yes, reboot.
5) Run ruu again...
it should work...
thanks, i will try it...
sorry, i thought that because of the problem with the hboot and so on, it should be the right place...
SanTos0250 said:
1) Download the "downgrade" PB99IMG file from http://alpharev.nl/.
2) Place it in your root of the sdcard.
3) Boot into bootloader (vol down + power)
4) If ask to install update, select yes, reboot.
5) Run ruu again...
it should work...
Click to expand...
Click to collapse
thanks, but i can't start the bootloader
Yasir Javed Ansari said:
Try 2.3 ruu from htcdev.com
Gingerbread..... try multiple times. Ensure data cable is ok and proper drivers installed through htc sync.
Oh, by the way, wrong place to post a question.
Regards
Yasir
Regards
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
now i get the error 152
Do you have adb installed on your PC?
hi
download stock hboot. download http://forum.xda-developers.com/showthread.php?t=794638 (android flasher). turn on the phone,with the android flasher flsh hboot.img and leave it open an try flash ruu again. it will work.
marriusf81 said:
download stock hboot. download http://forum.xda-developers.com/showthread.php?t=794638 (android flasher). turn on the phone,with the android flasher flsh hboot.img and leave it open an try flash ruu again. it will work.
Click to expand...
Click to collapse
Flashing stock hboot over cm7r2 can cause hboot brick, he needs downgrade hboot.
Sent from my GT-P3100 using Flashes and Thunders
nlooooo said:
Do you have adb installed on your PC?
Click to expand...
Click to collapse
everything is done, i got all driver..
now i will try it like the instruction of marrius, with the downgrad hboot, let me see if it works
marriusf81 said:
download stock hboot. download http://forum.xda-developers.com/showthread.php?t=794638 (android flasher). turn on the phone,with the android flasher flsh hboot.img and leave it open an try flash ruu again. it will work.
Click to expand...
Click to collapse
thanks a lot, everything is fine, the diffrent that i do, i used downgrad instead of stock hboot...
thanks everybody who helps me.
thread could be closed

RUU recovery failure

I have installed CyanogenMod10 and want to return to the the original factory image. All my attempts have failed.
I receive the mesage "Hboot Version is older!" then " Update Fail!"
I have extracted the RUU ROM.zip file and tried to upload manually but all my attempts fails.
Any help how to proceed will be appreciated
Moved to Q&A. Please ask all questions there.
romah1 said:
I have installed CyanogenMod10 and want to return to the the original factory image. All my attempts have failed.
I receive the mesage "Hboot Version is older!" then " Update Fail!"
I have extracted the RUU ROM.zip file and tried to upload manually but all my attempts fails.
Any help how to proceed will be appreciated
Click to expand...
Click to collapse
That is possile if the RUU is older than the one currently on your phone. If this is not the case, try to flash the RUU via the program and from hboot.
Ken-Shi_Kun said:
That is possile if the RUU is older than the one currently on your phone. If this is not the case, try to flash the RUU via the program and from hboot.
Click to expand...
Click to collapse
Obviously , since I have Cyanogenmod 10 installed the RUU version is older. CM10 is somehow preventing the RUU to execute correctly,
I have tried to run the RUU with Hboot but it didn't recognized the phone.
your backup is older than the bootloader version now you have .
Sent from my HTC T320e using xda premium
romah1 said:
Obviously , since I have Cyanogenmod 10 installed the RUU version is older. CM10 is somehow preventing the RUU to execute correctly,
I have tried to run the RUU with Hboot but it didn't recognized the phone.
Click to expand...
Click to collapse
Sorry I will be clearer. The ruu has two thing before start. It evaluates your cid and hboot version. If you had (my example here) a 2.22 stock and you want to flash the ruu of the 2.02 version it will not work because the hboot in your phone is newer. This is a security measurement for you not to be able to downgrade your os.
Even more, ruu needs stock recovery, stock kernel, and the phone to be either "locked" or "relocked". And more, if you has custom is on the phone that time, the ruu will only work from fastboot usb mode.
It is a joke tough that in these phones unlock and custom os is easily achivable, while going back to stock is like a pain in the ass.
Sent from my CM10 One V

Categories

Resources