Related
Not sure if this is common knowledge, but Storm over on the Nexus board built a color calibrator program that does a great job fixing color balance problems (I'm looking at you Nova LCD).
http://forum.xda-developers.com/showthread.php?t=745248
I am successfully using the cyanogen nightly apk version to correct the blue/purple hue on my nova. It took a little messing around and I do not have a color meter, but I ended up getting results that look great (used my macbook LCD which is color calibrated as the target).
Every LCD is different, but my settings are 919 red/ 905 green / 722 blue.
im about to try this out myself. so i flash to install this???
which one did you install?
Rydah805 said:
im about to try this out myself. so i flash to install this???
which one did you install?
Click to expand...
Click to collapse
If you have CM6, it's already installed... Just go to Settings -> Cyogenmod Settings -> Display -> Render UI, and choose one of the last 3.
Otherwise, flash the Universal APK from that thread-- it worked for my on BakedSnack and Fresh. Don't forget in any case to install the Calibrator APK... it allows you to manually tweak the settings, and also ensures that any settings you choose will be re-applied at bootup.
Well as I don't have cm6, it seems the sense version might be incompatible. I flashed the version sense (desire) and installed the apk. Upon changing any of the sliders results in a fc.
For now I think this calibration is limited to cm6; unless I just screwed something up and somebody else can get it to work. I'm going to try and use the universal install next and see if that'll get it to work. If it doesn't then us sense users are sol.
edtate said:
Well as I don't have cm6, it seems the sense version might be incompatible. I flashed the version sense (desire) and installed the apk. Upon changing any of the sliders results in a fc.
For now I think this calibration is limited to cm6; unless I just screwed something up and somebody else can get it to work. I'm going to try and use the universal install next and see if that'll get it to work. If it doesn't then us sense users are sol.
Click to expand...
Click to collapse
I had thought i had said if you don't have CM6, then try flashing the Universal version, not the Sense one-- the sense one seems limited to a specific ROM for the Desire. I had no issues flashing the Universal one on BakedSnack and Fresh, which both still have Sense.
Apk
One thing to note for CM6 users - the apk file allows you to tweak the 3 color bands to any setting you want, rather than just the 3 presets provided in the Cyanogen render effect menu. I was getting too much yellow in all of the N1 presets and was able to get good whites with the sliders.
I'm not sure how to run this on sense. Why would anyone want to use sense? I'm in a fast 4g area and I still cant stand it.
for stock with root ota 2.2 version .28 odex, use universal zip.
Sent From My HTC Evo Using Tapatalk Pro!
Using damage control jit performance profile sense less with screen brightness at 200 red at 942 green at 892 and blue and 996 and looking great! thanks this is what I have been looking for much cred
Ps when adjusting the screen brightness makes big difference
the universal app keeps fc'ing on me
I guess I'll try the CM version..
Thanks for the heads up on this, my dad just got an Iphone 4 and i was comparing the two displays by playing the same video on both, and noticed that my epson screen has quite a blue hue. He wouldn't stop poking fun at my Evo...until today! Played around with this and got it to be quite a bit more accurate, no more smack talking from him now haha.
Fc
I get force close... I installed the universal.zip and the normal.apk and when I open the app and touch any of the settings the app force closes... Anyone wanna do a mini tutorial on how they got it?
Wow I didnt even notice this. Thanks man!
mrcamposd said:
I get force close... I installed the universal.zip and the normal.apk and when I open the app and touch any of the settings the app force closes... Anyone wanna do a mini tutorial on how they got it?
Click to expand...
Click to collapse
You flash the zip file just like you would anything else-- there's really not much to it.
You don't mention what ROM/Kernel you are running... that might help.
sohr said:
You flash the zip file just like you would anything else-- there's really not much to it.
You don't mention what ROM/Kernel you are running... that might help.
Click to expand...
Click to collapse
Sorry, Yeah that's what i do and the app keeps crashing.
Evo 4G
Running Android 2.2
Baseband v. =2.15.00.07.28
Kernel v.=2.6.32.15-g3a86144
Build number= Fresh evo 3.2.0.0 by flipz
Software number= 3.28.651.1
is that what you have to or are you using another rom?
Finally I got it to work with another kernel. I have all colors in 1000... Tell me your colors so I can compare and maybe use yours
mrcamposd said:
Finally I got it to work with another kernel. I have all colors in 1000... Tell me your colors so I can compare and maybe use yours
Click to expand...
Click to collapse
Guess it doesn't work with netarchy's 4.1.9.1cfs kernel, because I am experiencing the exact same symptoms and am using the same ROM as you. I was beginning to think it was ROM related. What kernel did you end up using?
mrcamposd said:
Finally I got it to work with another kernel. I have all colors in 1000... Tell me your colors so I can compare and maybe use yours
Click to expand...
Click to collapse
I am currently using:
red 972
green 918
blue: 783
Although what you use will all be personal preference... the big thing is pushing the blue down as it is quite overpowered.
freeza said:
Guess it doesn't work with netarchy's 4.1.9.1cfs kernel, because I am experiencing the exact same symptoms and am using the same ROM as you. I was beginning to think it was ROM related. What kernel did you end up using?
Click to expand...
Click to collapse
Yes i'm assuming its a kernel related problem not a rom problem... Im using this kernel it works pretty good and I'm using the bfs one awesome speed in quadrant hitting 1400's
(Im using the beta version "Revision 4.1.9.1-BFS BETA - Fresh Compatible")
http://forum.xda-developers.com/showthread.php?t=719763
sohr said:
I am currently using:
red 972
green 918
blue: 783
Although what you use will all be personal preference... the big thing is pushing the blue down as it is quite overpowered.
Click to expand...
Click to collapse
Those settings seems too dim for me. I guess personal preference has to do a lot with these settings lol... (sticking with the 1000's RGB color)
thanks a lot
mrcamposd said:
Those settings seems too dim for me. I guess personal preference has to do a lot with these settings lol... (sticking with the 1000's RGB color)
thanks a lot
Click to expand...
Click to collapse
If you stick with 1000s for all 3 values, you might as well as not have the APK installed at all, IMO.
The settings you want to use may vary slightly based on your current lighting conditions and the brightness. On my settings, the screen is tiny,tiny bit dimmer-- but that is only because the blacks and greys become true blacks and greys and not dark purple and lilac. At the bare minimu, leave your red and green at 1000 and push the blue down until your greys are true greys....
Just wondering, but is there any way to increase the pulsing speed of the trackpad LED?
A lot of people have suggested LedMe Know but it doesn't have support for Google Voice (which I use for sms) and it flashes the trackpad, rather than pulses.
I've also tried Light Flow and although it pulses the trackpad and supports Voice, it doesn't change the speed of the pulse
Any suggestions?
Have you tried playing with the custom timing settings in Led me know?
If gvoice isn't supported, then perhaps it wont work....sry if it doesn't.
Well, like I said up top, it only flashes the led, instead of the pulses, regardless of any speed settings.
Plus no Google Voice in LedMe Know. Light Flow does support it (so its definately possible ), but it does not alter the pulse frequency so it doesn't add anything that stock didn't already do.
Sent from my T-Mobile G2 via telegram
Maybe you could contact the app developers and get them to add the feature(s)?
Some can be surprisingly responsive.
Good suggestion...but not quite the solution I'm looking for since LedMe flashes rather than pulses and I'd prefer if I didn't have to keep an app in memory just to change the frequency of a stock feature :/
Maybe there's a way to modify the lights.vision.so or something?
EDIT: I doubt the developer would try his hand at pulsing rather than flashing since it seems I'm just a minority who prefers the trackpad led rather than the speaker led. Also this seems like a device specific feature and the dev says in the app description: "only available at the moment for htc desire 2.2" so I doubt he has a DZ to test on... I found
EDIT2: I found exactly what I was looking for (http://forum.xda-developers.com/showpost.php?p=5609688&postcount=25) but sadly its only for Nexus One. I'm messaging the developer to see if maybe he'd port it over...
Sent from my T-Mobile G2 via telegram
Yeah I dont know much about editing those files, but some app devs are helpful. It might actually just be a quick edit for them to gain compatibility with GVoice.
I only use LED me know to flash my trackpad light really fast, upon arrival of sms' through tmobile carrier/handcent tho.
I hope you figure something out. I would like like it to pulse fast rather then just blink.
daaango said:
Good suggestion...but not quite the solution I'm looking for since LedMe flashes rather than pulses and I'd prefer if I didn't have to keep an app in memory just to change the frequency of a stock feature :/
Maybe there's a way to modify the lights.vision.so or something?
EDIT: I doubt the developer would try his hand at pulsing rather than flashing since it seems I'm just a minority who prefers the trackpad led rather than the speaker led. Also this seems like a device specific feature and the dev says in the app description: "only available at the moment for htc desire 2.2" so I doubt he has a DZ to test on... I found
EDIT2: I found exactly what I was looking for (http://forum.xda-developers.com/showpost.php?p=5609688&postcount=25) but sadly its only for Nexus One. I'm messaging the developer to see if maybe he'd port it over...
Sent from my T-Mobile G2 via telegram
Click to expand...
Click to collapse
Switch to an MIUI rom. It has the feature built in.
I appreciate pulsing the trackpad LED as well. However it's too slow a pulse at default speed, to be able to quickly peek at your phone and be able to tell if you have a message or not.
xREVOx: What exactly is this feature called? I want to look around and see if it will be included in the net CyanogenMod version.
Proxin said:
I appreciate pulsing the trackpad LED as well. However it's too slow a pulse at default speed, to be able to quickly peek at your phone and be able to tell if you have a message or not.
xREVOx: What exactly is this feature called? I want to look around and see if it will be included in the net CyanogenMod version.
Click to expand...
Click to collapse
I'm not using the MIUI rom right now, but it was called either Pulse Frequency or Pulse Delay. Default is 9 seconds. You can change it to as little as a 1 second delay.
I might have to flash it just to check it out and see how it works.
Currently I have LED me know flash my trackpad at 100 milisec. on and 100 milisec. off. Flashes fast and I notice it right away when checking for messages.
I just rather have the pulsing close to that speed.
Well I guess its nice to know that there's an actual solution... I wonder how hard it is to extract from miui rom?
I was looking around for the source of miui, but apparently its not released by their dev team...?
Sent from my T-Mobile G2 via Words With Friends for 42 points
daaango said:
Well I guess its nice to know that there's an actual solution... I wonder how hard it is to extract from miui rom?
I was looking around for the source of miui, but apparently its not released by their dev team...?
Sent from my T-Mobile G2 via Words With Friends for 42 points
Click to expand...
Click to collapse
You could try just flashing the exact file that controls it to your phone, from the MIUI rom... not sure exactly what it is though.
Proxin said:
You could try just flashing the exact file that controls it to your phone, from the MIUI rom... not sure exactly what it is though.
Click to expand...
Click to collapse
I believe its in Settings? I saw a video of MIUI running on a G2 and Trackpad Settings was in the Settings menu...not sure if it contains the pulse frequency but meh. If it is, I don't think it'll be too smart to flash it but idk.
Sent from my T-Mobile G2 via Words With Friends for 42 points
I know it's been touched on here and there (I.E.), but I haven't found a dedicated thread to it, and I know I'm definitely not the only one who is plagued by the annoyance. It seems like some have been able to get around the issue with the international version of the phone, but the North American version appears to be quite the hurdle. Either that, or the devs for all our favorite SMS apps aren't from the good ol' US of A, and don't really care about that feature. Either way, It's annoying to have cutting-edge technology in the palm of my hand without any reliable and simple means to have something other than a solid red LED regardless of the notification it represents. On the thread linked above, I noted that some were able to get a blinking notification, I've had no such luck. Perhaps they weren't rooted. I do recall the day I got my phone, before anything had been modified whatsoever, that the LED would flash blue, but once I got GoSMS Pro installed, it changed my SMS to solid red, and has been such ever since. Nothing at all that I have tried will change it.
TLDR: Has anyone found a way to stay on a custom ROM and/or launcher, AND set different color LED for notifications (as well as blink intervals) within the realm of SMS?
disturbd1 said:
I know it's been touched on here and there (I.E.), but I haven't found a dedicated thread to it, and I know I'm definitely not the only one who is plagued by the annoyance. It seems like some have been able to get around the issue with the international version of the phone, but the North American version appears to be quite the hurdle. Either that, or the devs for all our favorite SMS apps aren't from the good ol' US of A, and don't really care about that feature. Either way, It's annoying to have cutting-edge technology in the palm of my hand without any reliable and simple means to have something other than a solid red LED regardless of the notification it represents. On the thread linked above, I noted that some were able to get a blinking notification, I've had no such luck. Perhaps they weren't rooted. I do recall the day I got my phone, before anything had been modified whatsoever, that the LED would flash blue, but once I got GoSMS Pro installed, it changed my SMS to solid red, and has been such ever since. Nothing at all that I have tried will change it.
TLDR: Has anyone found a way to stay on a custom ROM and/or launcher, AND set different color LED for notifications (as well as blink intervals) within the realm of SMS?
Click to expand...
Click to collapse
Its working great with cm9. You can set it up in the settings
Sent from my SGH-T999
Xcor3 said:
Its working great with cm9. You can set it up in the settings
Sent from my SGH-T999
Click to expand...
Click to collapse
I thought about doing CM9, but last I read it doesn't look to be a finished product? I kept up with the thread on it for a bit after its release, and it seemed there were still bugs.
disturbd1 said:
I thought about doing CM9, but last I read it doesn't look to be a finished product? I kept up with the thread on it for a bit after its release, and it seemed there were still bugs.
Click to expand...
Click to collapse
yes there are bugs. But i barely stumble to them at all. Im using it as my daily driver and its working great for me.
Xcor3 said:
yes there are bugs. But i barely stumble to them at all. Im using it as my daily driver and its working great for me.
Click to expand...
Click to collapse
Awesome, I will flash it tonight, and play around with it.
Still curious if anyone has found a workaround on any TW-based ROMs :good:
Lightflow seems to be actively trying to work on the problem.
Sent from my SGH-T999 using Tapatalk 2
Hello people!
I have not long been using AOKP for very long, but i can say overall i love it, i have a few issues though.
I am aware of course it is a unofficial ROM and to expect it to run perfectly would be ridiculous and i was hoping if anybody had experienced anything similar and had any solutions?...
- My headphone jack has 100% stopped working since installing is ROM, i even reinstalled an old backup of MIUIv4 and it was working fine so it defiantly isn't the hardware.
- Black screen notifications, if i received an IM like whatsapp or even a SMS my led would light up and the screen backlight will turn on but its just a black screen?
- Fail to unlock screen first time around, now this doesn't happen all the time, maybe 30-40% of the time, but ill press the unlock button... the backlight will turn on but again its just a black screen, so i have to re-lock and unlock again and it will 100% work the second time... its kind of annoying.
Other than that the ROM works fine for me, i really don't want to lose the JB OS... is there a stable alternative maybe? or hopefully a simple fix.
By the way is based on their latest build.
Thanks!
Moved to Q&A
Please post in the correct section next time
Sent from my Nocturnalized One XL using Forum Runner
the best for me
http://forum.xda-developers.com/showthread.php?t=1982411
the best ROM for me work perfect!!
xmixmaster said:
http://forum.xda-developers.com/showthread.php?t=1982411
the best ROM for me work perfect!!
Click to expand...
Click to collapse
thanks for that man... im gonna read a little more into but it seems like the best choice... will defiantly check it out!
UPDATE: ive given the ROM a go and i must say its a lot more stable than i thought it would be when its a "mishmash" of different ROMs put together.
i still have the headphone jack issue thought, i read a few other forums that people are experiencing using ROMs based on CM10... have you not had this issue?
This thread was not created by the Paranoid Android group
This thread is dedicated to Questions and Answers that may associated with ParanoidAndroid 3.0+
This thread is for the I747/I747m only. Users of another carrier should check your specific forums
This is a place for no hassle help with Paranoid Android 3.0+. This means general questions about settings, "how to", and things of that sort. Primarily, things that would not help further the development of the ROM, but things that users would like to ask. If you are unsure of whether your concern should be posten in development or here, post it here. If it's determined that it should be in Development, I am sure someone will politely direct you to the proper place .
Finally:
NO FLAMING
Flaming in this thread will be dealt with by our moderation staff. Please don't take it upon yourself to do so. Just report the post that is inflamatory, the mods can do the rest.
Development Thread
ParanoidAndroid3.0+
No one has questions
OK please try to go easy, Im not a noob (Im just getting old) I just had my i717 note 1 stolen and i got an att Galaxy S3 on the way... Just prepping, I want to do the most stable paranoid android build out and get into some phablet action. Where can I get the install files for the 3/15 version, it sounds like thats the most stable at this point, any suggestions or points to the contrary, but most importantly where can I find the basic files for the 3/15 and whatever else you need to get from stock ui to PA... Any tips are so greatly appreciated, seriously. XDA love..
Just need to be pointed in the right direction, need full camera/main functions to maintain functionality so whats the way to go for stable tablet style PLEASE HELPPP, LOL
Sincere sincere thanks from an overworked and slightly behind the curve but loyal and dedicated Android user.
Adam
I am using 3.11. The OLED changes to its battery fully charged color @ 90%. Is there is there a way to fix this?
Sent from my Galaxy S3 using Tapatalk
Everything is running great. I came from ParanoidKangDroid because of a couple programs where expanded desktop didn't stick.
I haven't been able to make my lock screen pie be the same colors as my device wide color scheme. It always defaults to stock colors for that. Ideas?
KorGuy123 said:
Everything is running great. I came from ParanoidKangDroid because of a couple programs where expanded desktop didn't stick.
I haven't been able to make my lock screen pie be the same colors as my device wide color scheme. It always defaults to stock colors for that. Ideas?
Click to expand...
Click to collapse
Never mind... I'm an idiot. Had to go hybrid properties > apps and change the color for system ui and android system and reboot. Doh.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
S3 lockups and LTE?
Hi
I put this on my GS3 (I747 AT&T) last night and so far it's pretty good.
I have noticed some weird occasional lockups and reboots, which is find for unofficial rom, I know what I'm getting into.
My other issue is that it seems to prefer 3G, HSDA, or HSDA+ over LTE even though I'm in a market with extensive LTE coverage. Is there any way to "weight" this?
Also the on-screen soft keys seem redundant, is there a way to disable them without disabling the status bar (PIE mode hides both)?
Thanks!
MrAkai said:
Hi
I put this on my GS3 (I747 AT&T) last night and so far it's pretty good.
I have noticed some weird occasional lockups and reboots, which is find for unofficial rom, I know what I'm getting into.
My other issue is that it seems to prefer 3G, HSDA, or HSDA+ over LTE even though I'm in a market with extensive LTE coverage. Is there any way to "weight" this?
Also the on-screen soft keys seem redundant, is there a way to disable them without disabling the status bar (PIE mode hides both)?
Thanks!
Click to expand...
Click to collapse
Lockups and reboots are kernel related you can try flashing another kernel (or wait for an update) I use this. It's the 4/09 All-Star Devs Kernel. You have to make sure if you flash a kernel not to go any newer than 4/09/13 or it won't work this this ROM until it gets updated.
Make sure your APN settings are correct, make sure LTE is selected in your settings and if all else fails do a Speed Test to check your speeds.
You can disable Nav Bar (Bottom) Settings > Hybrid Properties > Nav Bar 0% Apply and reboot if it prompts for it.
KorGuy123 said:
Lockups and reboots are kernel related you can try flashing another kernel (or wait for an update) I use this. It's the 4/09 All-Star Devs Kernel. You have to make sure if you flash a kernel not to go any newer than 4/09/13 or it won't work this this ROM until it gets updated.
Make sure your APN settings are correct, make sure LTE is selected in your settings and if all else fails do a Speed Test to check your speeds.
You can disable Nav Bar (Bottom) Settings > Hybrid Properties > Nav Bar 0% Apply and reboot if it prompts for it.
Click to expand...
Click to collapse
Awesome, thanks for the advice, I'll give it a shot!
Actually, I have noticed the same thing for me, only in the past two days.. Specifically: random sleeps of death with no regularity, and when trying to use Spotify, or I Heart Radio when plugged into my headphones (Samsung set that came with the phone) phone will not play music through the app, but it will work just fine when plugged into an aux cable... I have changed nothing in my kernel settings, or system settings since things settled down.
Very strange.
Thanks I was having some problems that kernel seem to fix them.
Sent from my Nexus 7 using Tapatalk HD
i'm just curious, but does anyone know why the PA team doesn't have an official ROM for our d2att version? (or am i just missing it somewhere?)
mrhomiec said:
i'm just curious, but does anyone know why the PA team doesn't have an official ROM for our d2att version? (or am i just missing it somewhere?)
Click to expand...
Click to collapse
Afaik pa only officially supports nexus devices. Everything else is unofficial I think.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
tablet ui statusbar clock size
Is there anyway to change the clock size and position of the date in tablet ui. The giant clock and date rilling off the edge is a deal breaker for me and this ROM. I've searched everywhere I know of and would apprieciate any advise. Thanks
mrhomiec said:
i'm just curious, but does anyone know why the PA team doesn't have an official ROM for our d2att version? (or am i just missing it somewhere?)
Click to expand...
Click to collapse
Yup only nexus devices and now the Oppo Find 5 are supported other devices are not supported. Someone has ported Paranoid Android over to unofficial devices.
Sent from my Nexus 7 using Tapatalk HD
What do the instructions mean by "update recovery"?
Thanks!
I'm on the latest version of Paranoid Android. I've been experiencing this weird noise. It happens when the phone is placed down or just the screen turning on or off. In the video, it sounds like I'm placing the phone down with some force but I've activated the sound even when putting it down super gently.
Here's the video:
http://www.youtube.com/watch?v=ekbad5xoQos
If anyone can tell me how to disable this noise or what causes it, I would be greatly appreciative!
burninghotcheese said:
What do the instructions mean by "update recovery"?
Thanks!
Click to expand...
Click to collapse
Simple answer:
The instructions are simply telling you to make sure that you have the most recent recovery for your device is installed, and if not, to install it. Oftentimes not having an updated recovery is what causes the Status 7 errors when trying to flash new ROMs.
---------- Post added at 02:12 PM ---------- Previous post was at 02:07 PM ----------
mirrored said:
I'm on the latest version of Paranoid Android. I've been experiencing this weird noise. It happens when the phone is placed down or just the screen turning on or off. In the video, it sounds like I'm placing the phone down with some force but I've activated the sound even when putting it down super gently.
Here's the video:
http://www.youtube.com/watch?v=ekbad5xoQos
If anyone can tell me how to disable this noise or what causes it, I would be greatly appreciative!
Click to expand...
Click to collapse
Uhm, that is odd? Though it sounds like it might be the notification sound of the microsd card disengaging and re-engaging?
Just a thought.
I read in the PA development thread that ATT and TMO roms are.interchangeable. Has anybody tried flashing the T-Mobile PA onto their ATT s3?
sent from the very outdated xda premium app
NicholasQ said:
I read in the PA development thread that ATT and TMO roms are.interchangeable. Has anybody tried flashing the T-Mobile PA onto their ATT s3?
sent from the very outdated xda premium app
Click to expand...
Click to collapse
Other than the updated kernel and displays drivers there is no difference in roms. Regardless if it'll work it won't give you anything you don't already have.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app