Develop Bugs

[Q] syndicateROM Frozen 1.1.0 MISTAKE

Hi Im running ClockworkMod Recovery v2.5.1.0 and I tried to flash syndicateROM Frozen 1.1.0 to my Epic 4g. I wiped the data three times as well as the cache and dalvik cahe. What the phone does is it loads to the "SAMSUNG" screen and stays there. Ive tried to connect it to my pc in download mode to use odin and it tells me the device is malfunctioning and the device drivers didnt properly install. So now I feel stuck because i cant find any other ways around this issue...can some PLEASE HELP?? Also in CLockwork mode it says at the bottom "E:Can't open /cache/recovery/log"
Thanks in advanced and I apologize if this thread has been made already.

This doesn't belong in development.
You can't flash an EXT4 ROM on rfs clockwormod. Either flash an old nand backup then reroot with the newest one click root or use a prerooted tar in odin.
Texted while driving

Root with Clockwork Mod 3.0.0.5 or greater sir. You need to be on EXT4 for SRF if i'm not mistaken. ClockworkMod 2.5.1.0 is RFS still i believe. Also, inb4 this belongs in Q & A section.
timo2387 said:
Hi Im running ClockworkMod Recovery v2.5.1.0 and I tried to flash syndicateROM Frozen 1.1.0 to my Epic 4g. I wiped the data three times as well as the cache and dalvik cahe. What the phone does is it loads to the "SAMSUNG" screen and stays there. Ive tried to connect it to my pc in download mode to use odin and it tells me the device is malfunctioning and the device drivers didnt properly install. So now I feel stuck because i cant find any other ways around this issue...can some PLEASE HELP?? Also in CLockwork mode it says at the bottom "E:Can't open /cache/recovery/log"
Thanks in advanced and I apologize if this thread has been made already.
Click to expand...
Click to collapse

063_XOBX, you are a fast one while driving even lol /shakesfist

p3dr0maz said:
Root with Clockwork Mod 3.0.0.5 or greater sir. You need to be on EXT4 for SRF if i'm not mistaken. ClockworkMod 2.5.1.0 is RFS still i believe. Also, inb4 this belongs in Q & A section.
Click to expand...
Click to collapse
Thank you, im going to attempt to flash an older rom. would you suggest one? im looking at DK28 hopefully it will work with my clockmod so ill be able to flash it and then reroot it and install the new clockmod.

Can't people read directions. Best thing to do is odin back to stock then root with the one click for eb13 then boot into recovery. Once its done converting to ext4 you have to flash a compatiabke ext4 kernel or it wont boot
Sent From My Evo Killer!

musclehead84 said:
Can't people read directions. Best thing to do is odin back to stock then root with the one click for eb13 then boot into recovery. Once its done converting to ext4 you have to flash a compatiabke ext4 kernel or it wont boot
Sent From My Evo Killer!
Click to expand...
Click to collapse
Did you read that Odin wasnt working for me??

No did u read this was development section
Sent From My Evo Killer!

timo2387 said:
Thank you, im going to attempt to flash an older rom. would you suggest one? im looking at DK28 hopefully it will work with my clockmod so ill be able to flash it and then reroot it and install the new clockmod.
Click to expand...
Click to collapse
I was in the EXACT same situation as you yesterday.
Just use Odin, it is super easy and fast.
Follow these directions: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing
Except in step 5 where it wants you to get the "Stock DI18" rom, you instead want the newest EC05 rom (found here: http://www.megaupload.com/?d=PXBJ2JNH )
Once your all up and running with that restored rom, run this CWM3 one click: http://k0nane.info/rom/cwm3.zip
Then, finally, now that you are running CWM3 you can flash Syndicate 1.1.0
-Ash-

Moved to Q&A.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

timo2387 said:
Did you read that Odin wasnt working for me??
Click to expand...
Click to collapse
Lets not get snippy. everyone is tying to help. sounds like you might want to reinstall the samsung drivers. before you do, you might want to try to purging power from your phone. With battery out hold down your power button for 15 seconds a few times. then reinsert battery try to go into download mode for Odin.
If that doesn't work, reinstall samsung drivers and start over FOLLOWING directions in one of the many threads on stock recovery.

AshsToAshs said:
I was in the EXACT same situation as you yesterday.
Just use Odin, it is super easy and fast.
Follow these directions: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing
Except in step 5 where it wants you to get the "Stock DI18" rom, you instead want the newest EC05 rom (found here: http://www.megaupload.com/?d=PXBJ2JNH )
Once your all up and running with that restored rom, run this CWM3 one click: http://k0nane.info/rom/cwm3.zip
Then, finally, now that you are running CWM3 you can flash Syndicate 1.1.0
-Ash-
Click to expand...
Click to collapse
My Odin isnt recognizing my phone neither is my PC ...are there steps to take to correct this issue?

zenvita said:
Lets not get snippy. everyone is tying to help. sounds like you might want to reinstall the samsung drivers. before you do, you might want to try to purging power from your phone. With battery out hold down your power button for 15 seconds a few times. then reinsert battery try to go into download mode for Odin.
If that doesn't work, reinstall samsung drivers and start over FOLLOWING directions in one of the many threads on stock recovery.
Click to expand...
Click to collapse
Ok thanks I will try that

timo2387 said:
My Odin isnt recognizing my phone neither is my PC ...are there steps to take to correct this issue?
Click to expand...
Click to collapse
These steps mention the Samsung Drivers you need. If youve already tried some drivers for your phone that are not working, then i would uninstall those and use the Samsung drivers listed in those steps.
-Ash-

AshsToAshs said:
These steps mention the Samsung Drivers you need. If youve already tried some drivers for your phone that are not working, then i would uninstall those and use the Samsung drivers listed in those steps.
-Ash-
Click to expand...
Click to collapse
Its probably your cable. Do you have a better micro USB cable if you don't get one.
Sent from my SPH-D700 using XDA Premium App

Musclehead makes a perfect name for someone who wants to be a d!ck.
musclehead84 said:
No did u read this was development section
Sent From My Evo Killer!
Click to expand...
Click to collapse

socos25 said:
Musclehead makes a perfect name for someone who wants to be a d!ck.
Click to expand...
Click to collapse
MuscleHead Is very active in these forums and is a very helping guy...
He didn't start it the OP did please do not start that BS around here thanks.

iSaint said:
MuscleHead Is very active in these forums and is a very helping guy...
He didn't start it the OP did please do not start that BS around here thanks.
Click to expand...
Click to collapse
Thanks isaint I appreciate that. Let em talk bro.....
Sent From My Evo Killer!

[Q] System Upgrade

NOOB Question:
I have gotten an OTA notification that HTC has a System Software Upgrade (4.22.651.2). My EVO is rooted with Unrevoke3.
Must I unroot my EVO to do this upgrade?
BTW, anyone know what this upgrade really is?
Thanks in advance.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Jeez, Bro, this is all over the forums. I mean, in every Evo section there is are multiple posts on the upgrade, which people have been getting, btw, since Friday morning.
I mean, I'm TRYING to be nice, for a change, but seriously.....
Try to actually READ through the goddamn thread titles before you post something so ridiculous.

sry for the Upset man, but I thought just maybe I could get a quick and easy answer without reading through pages and pages. Just wanted to know what this update actually is since its from HTC and not Sprint. Guess it was too much to ask.
Regards.....

Yes, you're good to update. Just accept, and let it do its thing. Should have gb. Have fun!
Sent from my PC36100 using XDA App

Go ahead and accept the OTA, do not unroot. That should update your radios too, and your HBoot.
You will need to flash AmonRa or ClockworkMod as a PC36IMG, go to those threads in development.
Then I would suggest you download a rooted version of the OTA or go to Synergy or MikG, they are Gingersense with Sense 2.1!
Sent from my PC36100 using XDA Premium App

Thx fella's but it sounds too complicated for me. Ima not that techy. If unrevoked3 was more complicated than 1 file, I wouldn't be rooted atm. Flashing and all that is over my head atm.
Thanks again...

Bro if you want gingerbread just download the rooted one that xhausx posted
Sent from my PC36100 using XDA Premium App

if you update the evo from the official gingerbread you can't root again
Sent from my PC36100 using XDA Premium App

what r the advantages of Gingerbread on the EVO? BTW, downloaded the update, it starts to install and then I get a triangle with a ! in the middle of it and it just stops.

jadden said:
if you update the evo from the official gingerbread you can't root again
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
At least for now you can not root again. I am sure that some cool guy here will make it possible again.

@ anthonyandrews,
Thx Buddy, that tells me to wait then. WiFi Wireless Tether is important to me atm and can't live without it.

rdisanza said:
what r the advantages of Gingerbread on the EVO? BTW, downloaded the update, it starts to install and then I get a triangle with a ! in the middle of it and it just stops.
Click to expand...
Click to collapse
You got basiclly two options, With Clockwork as ur recovery (Part of unrevoked) The OTA won't just install. you can procced with one of the following methods.
I did this for the last 2 updates for the evo Not counting this one as I moved on to Sense 2.1 (much better then what HTC is providing for evo)
Before you start make sure u Nandroid Your current setup so u can always fall back to that if there are problems. (reboot into recovery and select make nandroid)
Option 1.
1. Buy Root Explorer from market
2. Navigate to /Cache (I think)
3. Copy the Supersonic_BLAH_BLAH_BLAH.zip to ur sd card
4. Reboot into recovery (Power + sound down)
5. Choose flash zip from SD and choose the official update u copied to ur sd card in step 3
6. Be Patient
7. If Clockwork errors, reboot phone and use rom manager to install RA Recovery and repeat step 5 and 6
8. Once the flash is complete reboot phone
9. Be Patient
10 be patient
11. Ur phone will eventually finish the upgrade process volia!
12. You would be unrooted, and non of ur rooted stuff would work, you would need to reinstall a custom recovery and then flash the superuser app again.
Option 2:
1. Head over to http://forum.xda-developers.com/showthread.php?t=1038701
2. Download the ODEX version of the Update
3. Reboot into recovery
4a. To be safe I would wipe cache 2X and Dalvik cache 2X (Recomend RA Recovery), or
4b. you could flash the 4.22.651.2 Wipe from the link above I am guessing that is what that does since it says no data wipe.
5. Flash the Update zip
6. Be patient
7. Be patient
To update radios after Update has been applied: Download PC36.img from link above, and save to root of sd card, Shutdown phone Power on Holding down volume buton and wait until it tells u update found then choose to apply it.

@ detcup4evr ,
Thanks for the awesome instructions. Much appreciated my friend.....

can't flash anon ra recovery

I'm running SS final Rom and I'm trying to flash amon ra recovery and I rename file to PC36IMG.ZIP place in sdcard root and when I try to fast boot it it gets stuck on parsing. If I try to flash the file in recovery it says installation aborted. I'm running clockwork mod recovery at the moment any help?

InSaNeO1488 said:
I'm running SS final Rom and I'm trying to flash amon ra recovery and I rename file to PC36IMG.ZIP place in sdcard root and when I try to fast boot it it gets stuck on parsing. If I try to flash the file in recovery it says installation aborted. I'm running clockwork mod recovery at the moment any help?
Click to expand...
Click to collapse
Go here and download,these are themed recoveries,just download the one you want and make sure it says PC36IMG.ZIP,put it on your sd card root and boot into bootloader and flash,this wont give you any problems.

doesn't work I rename the file to PC36IMG.ZIP goto bootloader and it still gets stuck at parsing

InSaNeO1488 said:
doesn't work I rename the file to PC36IMG.ZIP goto bootloader and it still gets stuck at parsing
Click to expand...
Click to collapse
May want to try a diffrent sd card if you got one. As this may be the issue. Or reformat your current one, But copy anything you want saved to your pc before doing so. As this will delete everthing.

Evilone69tmg said:
May want to try a diffrent sd card if you got one. As this may be the issue. Or reformat your current one, But copy anything you want saved to your pc before doing so. As this will delete everthing.
Click to expand...
Click to collapse
1+

so I should reformat and 're partition the sd card? should I also wipe everything and reinstall Rom as well? using SS ultra final

Before doing that, are you s on, or s off?
Sent from my Galaxy Nexus

s was off before I flashed sensuASOP 2.55 I didn't like that Rom so I flashed ss ultra and now it's S ON what should I do

InSaNeO1488 said:
s was off before I flashed sensuASOP 2.55 I didn't like that Rom so I flashed ss ultra and now it's S ON what should I do
Click to expand...
Click to collapse
Download,flash image GUI, from the play store(it's like a dollar) then download the image file of the recovery you want to flash(should be posted in smelkus's thread) and use the app to flash. Otherwise you will need to get s off again, before flashing.
Sent from my Galaxy Nexus
---------- Post added at 02:48 PM ---------- Previous post was at 02:44 PM ----------
He's the link to smelkus's threadhttp://forum.xda-developers.com/sho...D][1-June-2012] RA-supersonic-v4.3-smelkusMOD
Make sure you download the image file, not the pc36img.zip
Sent from my Galaxy Nexus

How does flashing a ROM make you go from S-Off to S-on?

HipKat said:
How does flashing a ROM make you go from S-Off to S-on?
Click to expand...
Click to collapse
From what I have gathered he did not flash a rom but he flashed the PC36IMG.zip style ruu. To his bad luck it happened to be on with a newer HBOOT inside it which leaded to losing s-off.

HipKat said:
How does flashing a ROM make you go from S-Off to S-on?
Click to expand...
Click to collapse
That's what I was wondering. Lol
Sent from my Galaxy Nexus

HipKat said:
How does flashing a ROM make you go from S-Off to S-on?
Click to expand...
Click to collapse
CRIME INC. said:
That's what I was wondering. Lol
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I was going to ask the same thing.

jlmancuso said:
From what I have gathered he did not flash a rom but he flashed the PC36IMG.zip style ruu. To his bad luck it happened to be on with a newer HBOOT inside it which leaded to losing s-off.
Click to expand...
Click to collapse
Yeah, looking back, that's what I get, too

Flash image gui worked like a charm thanks for your help guys, any good roms that you guys would recommend to try out?

InSaNeO1488 said:
Flash image gui worked like a charm thanks for your help guys, any good roms that you guys would recommend to try out?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

If I were you, I'd go with one of the GB Hybrid ROMs. Try the one in my signature. It's a good one to start with and read my Evo Guide (Also in my signature).

If you want everything to work (front camera, netflix, Wimax, hdmi out) then you can only use gingerbread. If you don't use most of those the list of roms is limitless. They are all pretty good.
Sent from my PC36100 using xda app-developers app

[GUIDE][HOW-TO]Go from stock unrooted to 4.4.2 in 10 minutes or less! No PC needed!

Go from stock everything completely non-rooted, to rooted cm11 kitkat 4.4.2 in 10 Minutes or less!*
*Does not include download times.
You must be updated to the latest GB27 official samsung firmware.
This guide assumes that you're using Sprint, the root method will work with any carrier, but the ROM may not support all carriers, see the ROM's page for more info.
I AM NOT RESPONSIBLE FOR BRICKED DEVICES!
Everything here is done at the user's own risk.
Prerequisites:
-Stock GB27 firmware
-Download the latest Framaroot
-Download the latest Agat Recovery
-Download the latest Mobile Odin Lite, or buy the full version from the Play Store.
-Download the latest Blasphemy Kernel (Yes, download both Agat and Blasphemy.)
-Download the latest E4GT CM11 ROM, and the GAPPs also on that page.
-Download the FL24 Modem zip
Instructions:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I recommend that you have a file explorer, such as ES File Explorer (Free on the Play store!).
First, navigate to your downloads folder, which should look like this:
Next, install the Framaroot APK. If it says that the install has been blocked, go to settings and allow unknown sources.
Now, open Framaroot and click Aragorn.
You should now see this page, if not try all the other options.
Reboot, then go back to your downloads folder, and install mobile odin, open it, allow superSU, and click cancel when you get here.
Then click OK, all we need is kernel flashing. Select this file for firmware flashing:
Then, click flash firmware, click continue, your device will reboot.
Once your device reboots, fully shut it down, then hold VOLUME UP+POWER untill you see the Samsung logo.
You should come to a screen with an eagle logo, use the volume keys to navigate, and power to select.
Select backup and restore.
If you have a external SD card, select backup to SD card/ext SD card, if you don't, select backup to internal sdcard.
When that is done, go back to the main screen and select flash zip from SD card.
If the download folder is on your external SD card, select the first one, if it's on your internal SD card, go down and select internal.
Select your downloads folder, then select the blasphemy kernel zip
Scroll down to yes- install.
After that's done, go back to the main menu, go to advanced, then select reboot recovery.
You should now come up to a blue themed screen with a hat in the background. Controls are the same.
Now select wipe data/factory reset. (Don't worry, you backed it all up.)
Once that is done, go back, select mounts and storage.
Select Format (NOT unmount) /system
Then, go back and select flash zip from sdcard and flash the villuminati ROM zip.
Next, flash the FL27 modem zip
Then flash the GAPPs zip
Go back, and select Reboot system now.
You should see the Cyanogenmod boot screen.
Please note that the first boot will take several minutes, please be patient.
Go through the simple setup process and have fun!

Good guide, though you may want to mention that the link to Agat's kernel is only for JB TouchWiz (GB27, GB28, GC01)

bilgerryan said:
Good guide, though you may want to mention that the link to Agat's kernel is only for JB TouchWiz (GB27, GB28, GC01)
Click to expand...
Click to collapse
Sorry, but I couldn't find a .tar of the blasphemy kernel, so you have to flash the agat recovery and then apply the blasphemy kernel, but the kernel is a fairly small download.

gorei23 said:
Sorry, but I couldn't find a .tar of the blasphemy kernel, so you have to flash the agat recovery and then apply the blasphemy kernel, but the kernel is a fairly small download.
Click to expand...
Click to collapse
No I was saying to mention in the OP that you have to be on JB. If a person was trying to do this from ICS they could really screw stuff up. But I apparently missed where it said GB27 under prerequisites so you are good. Glad somebody finally did this.

Looks good, thanks for the walk through.

vampirefo said:
Looks good, thanks for the walk through.
Click to expand...
Click to collapse
Glad it helped!

FYI - I went to the GAPPS page that is linked from the VILLUMINATI page which brought me to another page where it gave me 4 options for GAPPS to use. I selected the first ie. Google Stock Package, and the GAPPS failed to install and gave me an error that /system ran out of space or something along those lines.
Going to try the Full Modular Package and see if I get any further with that.
---------- Post added at 01:28 AM ---------- Previous post was at 01:00 AM ----------
Alright, I did both the Full Modular and the Google Stock Gapps and both times I get Insufficient storage space available in System partition. You may want to use a smaller GAPPs then some more text followed by Status 7 - Installation aborted.
---------- Post added at 01:53 AM ---------- Previous post was at 01:28 AM ----------
Same error trying to install GAPPS Mini. Going to try the GAPPs micro edition.
---------- Post added at 02:08 AM ---------- Previous post was at 01:53 AM ----------
The micro GAPPs worked.

tenazrael said:
FYI - I went to the GAPPS page that is linked from the VILLUMINATI page which brought me to another page where it gave me 4 options for GAPPS to use. I selected the first ie. Google Stock Package, and the GAPPS failed to install and gave me an error that /system ran out of space or something along those lines.
Going to try the Full Modular Package and see if I get any further with that.
---------- Post added at 01:28 AM ---------- Previous post was at 01:00 AM ----------
Alright, I did both the Full Modular and the Google Stock Gapps and both times I get Insufficient storage space available in System partition. You may want to use a smaller GAPPs then some more text followed by Status 7 - Installation aborted.
---------- Post added at 01:53 AM ---------- Previous post was at 01:28 AM ----------
Same error trying to install GAPPS Mini. Going to try the GAPPs micro edition.
---------- Post added at 02:08 AM ---------- Previous post was at 01:53 AM ----------
The micro GAPPs worked.
Click to expand...
Click to collapse
I'm not sure why that happens, especially when I have so much space left. It only happened to me once, though.
Sorry for the delayed response.

Barebones CM11 (without gapps installed) takes up 312mb. System partiion is only 503mb. Which leaves only about 191mb left in the system partition The full and stock PA Gapps are huge (211-267mb) so there's no room left. I question why the mini PA Gapps won't flash as its only about 123mb

Yellow Triangle after flashing CM11 with blashamy
Hi there! Thank you for the great post! I had a stock one click ICS stock rom root and did a manual ODIN update since the mobile ODIN didn't recognize the phone. After flashing over the new recovery everything went through smoothly. The only issue I have now is that I get the yellow triangle when booting, but the phone does boot. It seems like in the other posts about the yellow triangle that the phone would hang there.
I followed the information in this post http://forum.xda-developers.com/showthread.php?p=22463153 about the yellow triangle. Downloaded it and reset the counter, but it didn't take the yellow triangle away, I didn't check to see if it actually reset it though as I am afraid to reboot the phone if the counter is going to keep track each time making it unusable. What steps or guides would you suggest to help resolve? Do I need to worry about rebooting the phone or is it OK?
Thanks!

H2Powerman said:
Hi there! Thank you for the great post! I had a stock one click ICS stock rom root and did a manual ODIN update since the mobile ODIN didn't recognize the phone. After flashing over the new recovery everything went through smoothly. The only issue I have now is that I get the yellow triangle when booting, but the phone does boot. It seems like in the other posts about the yellow triangle that the phone would hang there.
I followed the information in this post http://forum.xda-developers.com/showthread.php?p=22463153 about the yellow triangle. Downloaded it and reset the counter, but it didn't take the yellow triangle away, I didn't check to see if it actually reset it though as I am afraid to reboot the phone if the counter is going to keep track each time making it unusable. What steps or guides would you suggest to help resolve? Do I need to worry about rebooting the phone or is it OK?
Thanks!
Click to expand...
Click to collapse
Its fine to reboot your phone. The counter only tracks how many times you have used ODIN to flash a kernel, modem, ROM (although some do not trigger the yellow triangle.)
Sent from my SPH-D710 using Tapatalk

H2Powerman said:
Hi there! Thank you for the great post! I had a stock one click ICS stock rom root and did a manual ODIN update since the mobile ODIN didn't recognize the phone. After flashing over the new recovery everything went through smoothly. The only issue I have now is that I get the yellow triangle when booting, but the phone does boot. It seems like in the other posts about the yellow triangle that the phone would hang there.
I followed the information in this post http://forum.xda-developers.com/showthread.php?p=22463153 about the yellow triangle. Downloaded it and reset the counter, but it didn't take the yellow triangle away, I didn't check to see if it actually reset it though as I am afraid to reboot the phone if the counter is going to keep track each time making it unusable. What steps or guides would you suggest to help resolve? Do I need to worry about rebooting the phone or is it OK?
Thanks!
Click to expand...
Click to collapse
The yellow triangle is just notification that you're running a non-samsung firmware. Flashing back to stock will remove it.
Next time, please update to GB27/GB08, because following these instructions from GB27/08 will not trigger the yellow triangle, and will allow you to use Mobile Odin.
Instructions for GB27/08 Here. (It's too big an update to do OTA, it must be done through a PC.)

Thanks!
Wow, thank you the quick replies! If it is just a notification, I think I'll just ignore it. Just wanted to make sure it didn't have a timer to kill function. The ROM and kernel are running great. I am getting about 10hrs of medium to high usage. Thanks for the guide again.

H2Powerman said:
Wow, thank you the quick replies! If it is just a notification, I think I'll just ignore it. Just wanted to make sure it didn't have a timer to kill function. The ROM and kernel are running great. I am getting about 10hrs of medium to high usage. Thanks for the guide again.
Click to expand...
Click to collapse
No problem, just sharing a quick way to enhance an awesome device.

Would 4g and mms work?
Sent from my SPH-D710 using xda app-developers app

steveokinevo said:
Would 4g and mms work?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, 4G does not work, but you can make Calls, Texts, and use 3G as well as use the FREE WiFi Hotspot! Though the Devs might fix this issue in the future, so check the ROM page for more info.

Edit

FL24 Modem or FL27?
In your download links, you say "Download the FL24 Modem zip", but in the rest of the instructions you reference FI27. I got a little bit freaked out when I noticed that in the middle of the modem install, but it appears that the FL24 Modem zip works. I wasn't sure if I needed to go back and flash FI27 even though things seem to be working with FL24.
Other than that minor confusion for me, your instructions worked perfectly. Thanks!

FL24
gijones said:
In your download links, you say "Download the FL24 Modem zip", but in the rest of the instructions you reference FL27. I got a little bit freaked out when I noticed that in the middle of the modem install, but it appears that the FL24 Modem zip works. I wasn't sure if I needed to go back and flash FL27 even though things seem to be working with FL24.
Other than that minor confusion for me, your instructions worked perfectly. Thanks!
Click to expand...
Click to collapse
You might be looking at FI27, not FL27 - I haven't seen such a thing as FL27, so I think FL24 is the latest modem

No 3G Data?
I followed everything step by step but one very important thing is not working... I don't have anyway web access except when connected to wifi. Is there a fix for that at all?

i think i messed up.

i'm sure people post stuff about this all the time, but as of right now i'm stuck in TWRP with no OS, and none of the ROMs i'm trying to use are working at all. i've tried cyanogen, and a couple other random ones i found here, and absolutely nothing is working. could anyone maybe PM me or something and help me through this i have no idea where i went wrong.

dokibot said:
i'm sure people post stuff about this all the time, but as of right now i'm stuck in TWRP with no OS, and none of the ROMs i'm trying to use are working at all. i've tried cyanogen, and a couple other random ones i found here, and absolutely nothing is working. could anyone maybe PM me or something and help me through this i have no idea where i went wrong.
Click to expand...
Click to collapse
I have to ask a preliminary question. What is your boot loader (is it the lastest (4.3))? If your bootloader IS not the latest then there are many ways to "start fresh" by flashing the Stock Rom in ODIN. Ill wait for your reply and guide you further.

imcol said:
I have to ask a preliminary question. What is your boot loader (is it the lastest (4.3))? If your bootloader IS not the latest then there are many ways to "start fresh" by flashing the Stock Rom in ODIN. Ill wait for your reply and guide you further.
Click to expand...
Click to collapse
how can i check my bootloader version?

dokibot said:
how can i check my bootloader version?
Click to expand...
Click to collapse
Quite honestly I dont know how to check from the recovery but which version of stock were you on? 4.3? 4.1.2?
---------- Post added at 07:17 PM ---------- Previous post was at 07:16 PM ----------
I also feel that you can wipe you data, internal data, system, cache and dalvik (which will delete everything) and then push the correct roms and gaaps thorough ABD so you wouldnt need to go back to stock

imcol said:
Quite honestly I dont know how to check from the recovery but which version of stock were you on? 4.3? 4.1.2?
Click to expand...
Click to collapse
i'm probably on 4.1.2 but honestly i'm not 100% sure because it was given to me and i didn't think to check. wow i made a big mistake.

dokibot said:
i'm probably on 4.1.2 but honestly i'm not 100% sure because it was given to me and i didn't think to check. wow i made a big mistake.
Click to expand...
Click to collapse
Alright... If we knew what version your on (for sure) then it would have been quite easy. What model phone do you have? i747 or i747m?

imcol said:
Alright... If we knew what version your on (for sure) then it would have been quite easy. What model phone do you have? i747 or i747m?
Click to expand...
Click to collapse
says on the back it's a SGH-1747. thought i'm almost 90% positive the phone was mostly unused when the update was released

dokibot said:
says on the back it's a SGH-1747. thought i'm almost 90% positive the phone was mostly unused when the update was released
Click to expand...
Click to collapse
okay... I have an easy solution for you on how to get your phone back to working condition but thats only if you have the older boot loader. If you flash the stock rom and you have the updated boot loader (that comes with 4.3) your phone will hard brick. If your willing to take the risk I can guide you further.

imcol said:
okay... I have an easy solution for you on how to get your phone back to working condition but thats only if you have the older boot loader. If you flash the stock rom and you have the updated boot loader (that comes with 4.3) your phone will hard brick. If your willing to take the risk I can guide you further.
Click to expand...
Click to collapse
is there any way i'd able to tell the difference with like a screenshot or something? i'd recognize it if there was a difference in the homescreen. then i'd be able to tell which one i had?

dokibot said:
is there any way i'd able to tell the difference with like a screenshot or something? i'd recognize it if there was a difference in the homescreen. then i'd be able to tell which one i had?
Click to expand...
Click to collapse
!This is 4.3!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!This is 4.1.1!

imcol said:
!This is 4.3!
!This is 4.1.1!
Click to expand...
Click to collapse
okay i'm gonna go with 4.3 then. i think that's the one!

dokibot said:
okay i'm gonna go with 4.3 then. i think that's the one!
Click to expand...
Click to collapse
Lol okay, I'm curious as to how you rooted your phone?

imcol said:
Lol okay, I'm curious as to how you rooted your phone?
Click to expand...
Click to collapse
i used Odin3 to root it.

dokibot said:
how can i check my bootloader version?
Click to expand...
Click to collapse
There is a difference that could be seen when you are in download mode due to Knox on the 4.3 update. Upload a picture of your download mode and we can advise you from there.
Sent from my awesome phone.

dokibot said:
i used Odin3 to root it.
Click to expand...
Click to collapse
Okay, from everything you've said here is the best solution that has the least percent of messing up.
Follow everything carefully and you should be good as new!
Boot into TWRP
Wipe DATA/FACTORY RESET
Wipe CACHE
Wipe DALVIK
Format SYSTEM
MOUNT your internal storage to the computer
***TAKE BACKUP OF PICTURES, ETC. from internal storage***
DELETE everything in the internal storage once you take backup, if needed
*** Based on your phone model and everything else I did most of the work and found the correct links, if you dont trust them search CM and 4.3 Gaaps and download them ***
COPY Stable rom to internal storage - here is cyanogenmod 10.2.1 stable for ATT i747: https://download.cyanogenmod.org/get/jenkins/57775/cm-10.2.1-d2att.zip
COPY Gaaps zip to internal storage - here is PA gaaps 4.3: http://www.mediafire.com/download/n2a7nta3jrj1ltk/pa_gapps-modular-mini-4.3-20131024-signed.zip
UNMOUNT internal storage
Flash CM
Flash Gaaps
Clear CACHE
Clear DALVIK
Reboot! You should be good to go

imcol said:
Okay, from everything you've said here is the best solution that has the least percent of messing up.
Follow everything carefully and you should be good as new!
Boot into TWRP
Wipe DATA/FACTORY RESET
Wipe CACHE
Wipe DALVIK
Format SYSTEM
MOUNT your internal storage to the computer
***TAKE BACKUP OF PICTURES, ETC. from internal storage***
DELETE everything in the internal storage once you take backup, if needed
*** Based on your phone model and everything else I did most of the work and found the correct links, if you dont trust them search CM and 4.3 Gaaps and download them ***
COPY Stable rom to internal storage - here is cyanogenmod 10.2.1 stable for ATT i747: https://download.cyanogenmod.org/get/jenkins/57775/cm-10.2.1-d2att.zip
COPY Gaaps zip to internal storage - here is PA gaaps 4.3: http://www.mediafire.com/download/n2a7nta3jrj1ltk/pa_gapps-modular-mini-4.3-20131024-signed.zip
UNMOUNT internal storage
Flash CM
Flash Gaaps
Clear CACHE
Clear DALVIK
Reboot! You should be good to go
Click to expand...
Click to collapse
does it have to be internal storage?

dokibot said:
does it have to be internal storage?
Click to expand...
Click to collapse
I said internal storage cause then you can also clear it and delete any junk files left behind. Once again I am not too familiar with TWRP and if you are able to flash zips straight from external storage, thats also fine.
ALSO look at other person posting a few replies ahead of mine, He has a way to check if you have 4.3 or not. If you didn't have 4.3 then you can flash back to stock easily and start from there instead of flashing a CUSTOM rom.

aybarrap1 said:
There is a difference that could be seen when you are in download mode due to Knox on the 4.3 update. Upload a picture of your download mode and we can advise you from there.
Sent from my awesome phone.
Click to expand...
Click to collapse
[/IMG]
[/IMG]
i'm new to forums in general, not sure if these links will work :T

aybarrap1 said:
There is a difference that could be seen when you are in download mode due to Knox on the 4.3 update. Upload a picture of your download mode and we can advise you from there.
Sent from my awesome phone.
Click to expand...
Click to collapse
i posted the pictures of my download mode o:

dokibot said:
i posted the pictures of my download mode o:
Click to expand...
Click to collapse
I dont know about the download mode thing so you have to wait for the other guy to come online
Have you tried doing what I posted?