i installed the drivers still my sgy only chargers help please
Sent from my GT-S5360
is ur sgy is fully drain? what exactly happen?
maicsdhin said:
i installed the drivers still my sgy only chargers help please
Sent from my GT-S5360
Click to expand...
Click to collapse
Help us help you, Please answer the questions below:
1. What OS are you using? Ex. Windows XP/Vista/7/8 or Mac OSX?
2. Do you get any error when installing the driver?
3. Do you get an error when you connect the device?
4. We're you able to sync or get your phone detected by KIES?
Thanks,
Carl
Re:
i had also encountered the same problem last night. I just don't know what causes the problem. It's was ok since yesterday after i hooked it to charge in my laptop and last night when i tried to charge again i noticed that that usb is not appearing on the status bar. I tried to reboot the both device and nothings change.
BTW im using windows 7 x86.
it's on custom rom,what custom rom r u using? try to wipe data/cache and partition,i also encounter the same problems previously.. but i ended up reflashing my rom..
im using windows xp . no error . it only charges as i connect . no , kies didnt dtect my sgy
r
Sent from my GT-S5360
you only need to do this exactly
1. first install skies or samsung drivers and odin.
2. open odin (1.85 or 1.84)
3. make sure your phone is open not in download mode. then connect usb cable to your computer with odin window open and connect galaxy y then this time turn off your fone and press "home button+power+volume down" and it detects your phone..and done!thats it.
Sent from my GT-S5360 using Tapatalk 2
dondieboy said:
i had also encountered the same problem last night. I just don't know what causes the problem. It's was ok since yesterday after i hooked it to charge in my laptop and last night when i tried to charge again i noticed that that usb is not appearing on the status bar. I tried to reboot the both device and nothings change.
BTW im using windows 7 x86.
Click to expand...
Click to collapse
vEget7 said:
it's on custom rom,what custom rom r u using? try to wipe data/cache and partition,i also encounter the same problems previously.. but i ended up reflashing my rom..
Click to expand...
Click to collapse
maicsdhin said:
im using windows xp . no error . it only charges as i connect . no , kies didnt dtect my sgy
r
Sent from my GT-S5360
Click to expand...
Click to collapse
mavszorg said:
you only need to do this exactly
1. first install skies or samsung drivers and odin.
2. open odin (1.85 or 1.84)
3. make sure your phone is open not in download mode. then connect usb cable to your computer with odin window open and connect galaxy y then this time turn off your fone and press "home button+power+volume down" and it detects your phone..and done!thats it.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Please do check the following:1. USB Ports
Try a different port. [Applies to PREVIOUSLY DETECTED PHONE and/or NEW PHONE CONNECTED FOR THE FIRST TIME]
If you are using a desktop computer, try the USB ports at the back of your computer.
If you are using a notebook computer, make sure the power plan you're using is not in Balanced or Power Saver. Try using High Performance when trying to flash and make sure USB Selective Suspend is disabled.2. USB Filter Driver [Applies to Windows Vista/7 Machines though later version of XP Supports USB Filter Driver]A Filter Driveris a Microsoft Windows driver that adds value to peripheral devices or supports a specialized device in the personal computer. It is a driver/program/module that is inserted into the existing driver stack to perform some specific function.
Written either by Microsoft or the vendor of the hardware, any number of filter drivers can be added to Windows. Upper level filter drivers sit above the primary driver for the device (the function driver), while lower level filter drivers sit below the function driver and above the bus driver.Try deleting theUSB "Upper Filter" & "Lower Filter" Entry in registry editor and check if it fixes the problem.
Delete the USB Upper and Lower Filter in the Registry by following the steps by following the steps below:
Before we go any further, please first backup the Registry.
Important: This method contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry
incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can
restore the registry if a problem occurs.
For more information about how to back up and restore the registry in Windows:
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
1. Click “Start”, type “REGEDIT” (without quotation marks) in the “Search” bar and press Enter.
Note: If UAC (User Account Control) pops up, please accept it.
2. Right click “Computer” (the root node) in the left pane, click “Export” under the “File” menu, choose “All” under “Export range”, and select “Desktop”
in the “Save” in box and type backup in “File Name”. Click “Save”.
Note: The backup file is on the Desktop and named backup.reg. We can simply restore the registry by double-clicking the backup.reg file.
3. Click “Start”, type “REGEDIT” (without quotation marks) in the “Search” bar and press Enter again.
4. Locate the “UpperFilters” value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}
5. On the “Edit” menu, click “Delete”, and then click “OK”.
6. Locate the “LowerFilters” value under the same key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}
7. On the “Edit” menu, click “Delete”, and then click “OK”.
8. Quit Registry Editor and restart the computer.
Make sure you follow the steps correctly.3. Samsung drivers[Applies to PREVIOUSLY DETECTED PHONE and/or NEW PHONE CONNECTED FOR THE FIRST TIME]
Reinstall Samsung drivers to make sure driver files are intact. Believe it or not, a simple update or program installation can mess up drivers on your computer.
Before you re-install the driver, please take note of the following:
Your phone should be disconnected and/or any USB device (USB Flash drives, cameras, ipod etc etc)
Close any program that communicates with you phone -KIES, Odin etc etc.
If you're using for more than an hour or have opened several programs, please turn of your computer and the turn it back on, a warm boot (restart) is not the best way to "refresh" your computer before you install drivers, It should be a cold boot (shutdown-power up)
If you've taken my notes in consideration, please by all means re-install the drivers 4. Try a different version of Odin that supports Galaxy Young.
Make sure the Odin version you're using supports Galaxy Young. Some Odin versions support specific samsung phones ONLY5. Restore your computer to a state where your phone can be detected.[Applies to PREVIOUSLY DETECTED PHONE ONLY]
This option applies if all else fail and do me a favor, don't call your computer's support team, they will make you do a bunch of troubleshooting steps and in the end, a simple restore would take care of it.ANOTHER NOTE:
Pressing the POWER BUTTON without having both HOME BUTTON and VOLUME UP KEY pressed will not get you anywhere. Either your press HOME BUTTON first then the VOLUME UP KEY before you press the power button or you make yourself believe that your phone won't go into download mode/Odin mode. That being true, previous comment that says: "home button+power+volume down" I believe is a typo. Good luck to y'all who have this kind problem.
Related
Hi guys,
I checked all the forums and other treaths and did everything what they say but got nothing.
problem is my wave2 8530 cannot recognize by WINDOWS7.
1. Updated all the drivers, kies, USB, etc.
by the way on the bootloader mod(Balckscreen), windows7 still not recognisizing my device...
How can I connect yo wave 2 with USB to use Multiloader. Becouse of these reasons, multiloader cannot search and find PORT...
by the way on the bootloader mod(Balckscreen)
Click to expand...
Click to collapse
You are able to use Wave?
You can see something?
If not...
Your battery is charged? Be sure not empty...
You can access Download Mode?
Best Regards
Battery is charged, I can use the phone, but even the phone is on or not my wave 2 cannot connect to the PC, KİES and anything...
Menu-settings-onnections-usb/kies/etc set everything but notting happened.
I want to flash orginal ROM again
but when I set the device on bootloader mode, windows 7 not recognize....
64 or 32 bit Windows...
Are Driver proper installed?
Check device manager...
Best Regards
Check if phone is charging when connected and also check the usb port,cable
try this one
switch off tk file explorer :
1) open keypad
2) type *#197328640#
3) open "[6] Common" by pressing on 6 on the displayed keypad.
4) open "[3] USB Configuration" by pressing 3.
5) NOW WAIT , and check for the star mark in front of the two options.
If its next to OFF then you dont need to do anything else, just close everything.
If its next to on then press 2 to turn it off.
It will show this after pressing 2 >>---> " [1]TkFilexplorer - ON [] "
Now close everything and you are done !
pls also try very very carefully
if you dont understand completely - you shoudnt do it
go to control panel - hardware and sound - device manager
expand the view of the usb - universal serial bus
make sure that that you have the drivers to your usb devices
delete all the usb from there
disconnect all usb devices
restart your pc and let windows reinstall all your usb components
and then retry to connect your cell
good luck
guyz ca any help hot to fix this "odin said CANT OPEN THE SERIAL COM PORT"
what does it means,,
BTW, MY SGY is connected to odin already im trying to fix. (softbrick i guess is my UNIT)
kimerika said:
guyz ca any help hot to fix this "odin said CANT OPEN THE SERIAL COM PORT"
what does it means,,
BTW, MY SGY is connected to odin already im trying to fix. (softbrick i guess is my UNIT)
Click to expand...
Click to collapse
try odin version 1.84!!
just extract the attached file
btw way make sure that you are in "DOWNLOAD mode" by turning off your phone
and pressing the volume down + power button + home key all at the same time
leodasal2 said:
just extract the attached file
btw way make sure that you are in "DOWNLOAD mode" by turning off your phone
and pressing the volume down + power button + home key all at the same time
Click to expand...
Click to collapse
ill tried both odin 1.84 and 1.85, the same result,,"failed"
yes im in download mode.
kimerika said:
ill tried both odin 1.84 and 1.85, the same result,,"failed"
yes im in download mode.
Click to expand...
Click to collapse
let's get to the basics shall we?
first of all make sure you have or done the following:
(1) installed samsung drivers (just install kies cd and plug your phone cable)
(2) using odin version 1.84
(3) kies program is turned off (if any)
(4) make sure you are logged on as "administrator"
btw have you tried this thread?
http://forum.xda-developers.com/showthread.php?t=1465800
leodasal2 said:
let's get to the basics shall we?
first of all make sure you have or done the following:
(1) installed samsung drivers (just install kies cd and plug your phone cable)
(2) using odin version 1.84
(3) kies program is turned off (if any)
(4) make sure you are logged on as "administrator"
btw have you tried this thread?
http://forum.xda-developers.com/showthread.php?t=1465800
Click to expand...
Click to collapse
:what do you mean in item #3?
:my com. does not prompt run as admin.
kimerika said:
:what do you mean in item #3?
:my com. does not prompt run as admin.
Click to expand...
Click to collapse
Originally Posted by leodasal2 View Post
let's get to the basics shall we?
first of all make sure you have or done the following:
(1) installed samsung drivers (just install kies cd and plug your phone cable)
(2) using odin version 1.84
(3) kies program is turned off (if any)
(4) make sure you are logged on as "administrator"
btw have you tried this thread?
Click to expand...
Click to collapse
at number 3 open kies to detect your mobile open after that close the kies then even if you are not run as administrator if you are using windows xp...by the way you are from cebu if you are willing to come here at the shop i can help you i am from cebu too...so i can help personally you
FuranshisuKurogawa said:
at number 3 open kies to detect your mobile open after that close the kies then even if you are not run as administrator if you are using windows xp...by the way you are from cebu if you are willing to come here at the shop i can help you i am from cebu too...so i can help personally you
Click to expand...
Click to collapse
did u mean "when i got connected to kies, then i closed it"
kimerika said:
did u mean "when i got connected to kies, then i closed it"
Click to expand...
Click to collapse
Load the kies so your device will be detected... you dont need to install Galaxy Y drivers because you have the Kies after Kies load you can close it..and open the Odin and prepare the Files to the Destination Box
the odin will detect your device anyway if you are willing to come at the shop ill fix your SGY
Make sure you have installed KIES
then connect your phone via USB cable to pc (MAKE sure it showed your device is installed and ready to use)
Next thing to do is.
exit KIES
meaning press CTR+DEL then go to process tab look for KIES and hit end task
exit all Active application in system tray and also Anti virus.
I'm always stuck at the boot.img or connection or NAND write. My phone doesnt show the bar showing the process completion. Stuck in custom ROMs. x(
ggnatomen said:
Make sure you have installed KIES
then connect your phone via USB cable to pc (MAKE sure it showed your device is installed and ready to use)
Next thing to do is.
exit KIES
meaning press CTR+DEL then go to process tab look for KIES and hit end task
exit all Active application in system tray and also Anti virus.
Click to expand...
Click to collapse
last Q. my com have a recycle .exe if ur familiar, can this be harm my SGY,
cause it broke my SDcard,
My experience on flashing
Since now its my second time flashing an SGY , first i unbricked my classmates SGY on Android 2.3.5 (B'coz she tried flashing another custom ROM with her custom ROM(Very common sense but she still do it so she end up bricking her phone, then she ask help for me ) )
Before i flashed i charged my SGY to 100 % (Fully charged)
Then i wiped my micro USB connector with a soft cloth
Then i turned off my phone
Then i pressed Ctrl+Alt+Del(Windows task manager) then i clicked "Processes"
then i ended up the Kies and ADB Session(i don't have it with my family PC)
Then i logged off my user then i logged on my dad's user account (Since he's only the one that has the administrator priveleges)
Then i downloaded Odin v 1.85 from SGY FAQ's here
Then i downloaded Doky's DXKK4 Wipe Pack for me (Since its the factory firmware of my phone)
Then i opened up Odin
And i pressed Power+Volume up+Home(i waited for 2 seconds before i release home button)
And i pressed Volume up on my phone (ODIN MODE)
Then i started selecting the valid DXKK4 files like PDA,PHONE/MODEM File,CSC
Then after that all i pressed "Start"
Then it stucked a bit on system.img file but after that all a green "PASS"surprised me then i started to jump jump jump (becase i successed flashing my phone)
Then the last message in the message box is "Successful 1/0 Failed"
Then my phone restarts,Then after i setup the phone i setup my CSC , for me i select XTC because ,my phone is an open line then it factory resetted again , then i set it up again , Now my phone is in the DXKK4 firmware again YAY ! Refer to Doky's thread on the Development section for full instructions before flashing
Try vaccuming your USB Ports or try an earlier version of Odin for our SGY
if you're running windows 7. You can type the combo button ctrl alt del and you will see "start task manager" and click on the processes and find all programs kies named like "Kieshelper" i think there's three different kies running in the processes. End process it and find your antivirus in the processes. Example is "egui" for eset, "avg" for avg, and many more. If you cant find your antivirus, just disable it, or if it can't be disabled, just uninstall it, and reboot. After reflashing, just install it again. Please note that KIES and ANTI VIRUS must be completely closed. Make sure that you have kies installed in your computer, if an antivirus is open, there might be chance that you'll receive a fail in odin.
jeffcleds said:
if you're running windows 7. You can type the combo button ctrl alt del and you will see "start task manager" and click on the processes and find all programs kies named like "Kieshelper" i think there's three different kies running in the processes. End process it and find your antivirus in the processes. Example is "egui" for eset, "avg" for avg, and many more. If you cant find your antivirus, just disable it, or if it can't be disabled, just uninstall it, and reboot. After reflashing, just install it again. Please note that KIES and ANTI VIRUS must be completely closed. Make sure that you have kies installed in your computer, if an antivirus is open, there might be chance that you'll receive a fail in odin.
Click to expand...
Click to collapse
I Did closing Kieshelper on the Processes of the task manager(since my family PC is on Windows XP), But i did not do disabling the antivirus but i turned off the WiFi connection, So it disconnects all the devices connected on the WiFi it disconnects my Dad's Acer Iconia Tab A500 on Android 3.2 and his HTC Desire S as well and My Mom's Samsung Galaxy Gio as well me,my dad,my mom all using Android phone
refer to this thread for flashing instructions : http://forum.xda-developers.com/showthread.php?t=1465800
i followed that all , So i successed flashing DXLA1 Stock ROM to my factory firmware DXKK4
---------- Post added at 10:04 PM ---------- Previous post was at 09:52 PM ----------
kimerika said:
last Q. my com have a recycle .exe if ur familiar, can this be harm my SGY,
cause it broke my SDcard,
Click to expand...
Click to collapse
before flashing its either format your SD Card using your phone..
How to ? Go to Settings>SD and Phone storage>Unmount SD Card(Wait for the status on notification bar if SD is safe to remove)>Then the "Format SD Card" option will be available, Tap on that >Format SD card>Erase All
Then Your SD will be formatted, so Backup first
Before flashing perform a factory reset
How to? Go To Settings>Privacy>Factory data reset>Then it will prompt you if you want to format the SD card , Just put a check on that but don't forget to backup first>Then follow the next procedure for factory resetting then after that, Power off your phone then Press Power+Home+Volume down then a warning will appear , Press volume up to proceed to ODIN MODE then connect your phone then select the appropiate files for your phone then click "Start" then see your message box on the left bottom to see what's happening on flashing your phone
my SGY is fixed thanks a lot for the help
kimerika said:
my SGY is fixed thanks a lot for the help
Click to expand...
Click to collapse
we would prefer that you just press the thanks button
much easier than typed
kimerika said:
my SGY is fixed thanks a lot for the help
Click to expand...
Click to collapse
Just Press "Thanks" if i've help you , But i think not because i just shared my flashing experience
well first of all, I installed merruk with hyperion 8 ROM. after i install merruk kernel, my phone shuts down on its own. Because I hated whats happening, i changed to cyanogenmod9.1 by bieltv. then i remembered that i need to have a clean stock rom. but everything is too late. im trying t o use odin but it says that "com cannot open (or something like that)". please help. I installed Kies but still not working. PH by the way....
gabzloadead said:
well first of all, I installed merruk with hyperion 8 ROM. after i install merruk kernel, my phone shuts down on its own. Because I hated whats happening, i changed to cyanogenmod9.1 by bieltv. then i remembered that i need to have a clean stock rom. but everything is too late. im trying t o use odin but it says that "com cannot open (or something like that)". please help. I installed Kies but still not working. PH by the way....
Click to expand...
Click to collapse
you dont need kies its a waste of time
you just need to install samsung usb drivers
full instructions on how to use odin on my firmware thread at the top of the 5360 dev section
How to Install Jelly Bean 4.1 on Zync Z930 and also how to Root it.
Complete Guide here: http://abdulmomin.wordpress.com/2012/12/13/zync-z930-resources
USB ADB Driver - Download from the post above
Extract GENERALPLUS_ADB_PC_DRIVER_V01 to <adb_pc_driver> folder
Connect device to Windows via USB
Windows will prompt user to install ADB driver, point it to <adb_pc_driver>
Due to some incorrect information within the driver, Windows may complaint about missing file under <adb_pc_driver>/i386. Please manually point the location back to <adb_pc_driver> if this occurs.
----
Guide to JB flashing:
1. Shut down the tab
2.Download extract and Run General Plus Super MP Tool or download the all in one pack Zync Z930 JB firmware and update tool HERE extract and run G+MassProductionTool For GP330XX.exe
3. Tab should be off still and UNconnected, now Press reset button using a pen on the Tab just once briefly and release.
4. Now press the Volume + (Volume UP) button, and while holding it down insert the mini USB cable into the Tab and connect the PC. wait for a good 1 minute or so until all drivers are installed. It will show GPLUS GPLUS MSDC etc, Now SuperMP tool will prompt to add the USB device, accept it. Device now shows in one of the USB hubs of the Super MP tool,
5. Wait till the message comes hardware installed, will ask you to reboot, DONT do, say NO.
6. Now you are ready to start flashing, if you are using the all in one pack then you can straightaway start by clicking download.
7. After the process finishes, you should safely remove the device from USB and then press reset button, and then power it up.
Also refer to this guide for screenshots to assist better: http://www.4shared.com/office/yFO1E1MO/Zync-Z930-OS-Installation-Guid.html
8. Now you need to install ADB drivers, get them from here:
USB ADB Driver - HERE OR HERE:
Extract GENERALPLUS_ADB_PC_DRIVER_V01 to <adb_pc_driver> folder
Connect device to Windows via USB
Windows will prompt user to install ADB driver, point it to <adb_pc_driver>
9. Now you need to check the USB debug mode under settings and can root it by reading the post below:
Universal Flashing Rooting Maintenance:http://abdulmomin.wordpress.com/201...ade-and-flashing-rooting-maintenance-process/
Please feel free to comment and let me know if you found this useful. Thanks!
Problems with ZYNC Z930
Hi,
I got new ZYNC Z930 Tablet with Android 4.0 ICS installed. When I connect the tablet to my laptop with Windows 7 64 bit OS, the Windows recognizes as Composite Device and fails to install the drivers. I also tried manually downloading the drivers from the location that you have specified and manually point to install from the downloaded location but does not help.
I have connected the Tablet to Laptop with USB cable provided with Z930 Box. Do I need to connect using USB 2.0 cable for both ends???
Please help here...
Thanks in advance
Lokesh
Hi Lokesh, Please dont use 64 bit Win 7, use any computer with 32 bit Windows and drivers I supplied will work fine. You just need to connect the mini usb cable. Rest of the process please follow exactly as on the post.
Jelly Bean 4.1.1 upgrade on Z930 Successful
Hi Abdul,
Your steps helped a lot and later I contacted the ZYNC Customer Care located in Noida, even they also provided the same bundled the package.
I'm successfully able to upgrade to Jelly Bean 4.1.1 but after upgrading my tablet's WiFi stopped working I mean, when I switch in the Wifi, it keeps on searching for the Wifi Networks indefinitely. Did you face this problem?? Any solutions for this ???
Next, I'm going to try out your steps for Rotting the Z930.
Thanks
Lokesh,,,
WiFi on Z930 with Jelly Bean 4.1.1 works fine
Hi Adbul,
The Wifi issue got resolved after flashing the Jelly Bean binary on to Z930.
Did you try removing the default applications with the ROM?
Are you able to successfully Root the Device and FLASH any other custom ROMs on Z930??
If so,,, can you please share the steps / softwares used / links???
Also, Btw, what's the battery backup you are getting with Z930???
Thanks in advance
Lokesh..
Lokesh Haralakatta said:
Hi Adbul,
The Wifi issue got resolved after flashing the Jelly Bean binary on to Z930.
Did you try removing the default applications with the ROM?
Are you able to successfully Root the Device and FLASH any other custom ROMs on Z930??
If so,,, can you please share the steps / softwares used / links???
Also, Btw, what's the battery backup you are getting with Z930???
Thanks in advance
Lokesh..
Click to expand...
Click to collapse
Lokesh
can you plz explain how did u solved wifi issue..?
help needed ...thnx
Z930 Wifi Issue
Saurabh1369 said:
Lokesh
can you plz explain how did u solved wifi issue..?
help needed ...thnx
Click to expand...
Click to collapse
Hi...
Nothing much complicated, I just flashed the Jelly Bean Image using th steps given by the ZYNC and then, switched on the Wifi. By default, the Wifi will block the poorer networks, if you go to Advanced Options of Wifi and remove that, it will work fine.
Thanks
Lokesh
Battery Issue
Lokesh Haralakatta said:
Hi...
Nothing much complicated, I just flashed the Jelly Bean Image using th steps given by the ZYNC and then, switched on the Wifi. By default, the Wifi will block the poorer networks, if you go to Advanced Options of Wifi and remove that, it will work fine.
Thanks
Lokesh
Click to expand...
Click to collapse
Thanks Lokesh, this tip has helped me in WiFi issue. I noticed an issue with the battery. Either the charging is not effective or the battery is not good - The battery level drops to minimum with in an hour of using just Acrobat PDF Reader (with no WiFi / music / graphics etc).
Also the moment we connect the charger the level shoots up by 10-20% more in 1 second and if we remove the charger the level drops which is funny.
Did you faced any issues with the Battery? I installed 'Juice Defender' now and needs to see if I get any improvement.
Thanks
Satya
USB ADB Driver - Download from the post above
Extract GENERALPLUS_ADB_PC_DRIVER_V01 to <adb_pc_driver> folder
Connect device to Windows via USB
Windows will prompt user to install ADB driver, point it to <adb_pc_driver>
Due to some incorrect information within the driver, Windows may complaint about missing file under <adb_pc_driver>/i386. Please manually point the location back to <adb_pc_driver> if this occurs.
Hi, abdul
as per your guide, i had downloaded adb driver.
I'm using 32-bit windows 7.
But when i connect through usb, using usb debugging on, the computer says Windows failed to install drivers.
So, manualy if i go to device manager and select z930 and go to update driver, and then point to the folder adb_driver.
It says windows found the driver, but was unable to install them.
So, can you tell me, how were you able to install the driver?
Do i need to install android sdk?
Please help...!!!
unable to upgrade the tablet...
Hey guys please help me out... I followed the same instructions as mentioned above, but when I connected my tab to my Windows 7 32 bit computer it did not ask for any drivers, it automatically installed the portable device drivers...
And when I switch off the tab and opened the G+ MP tool and pressed the reset button and then I had pressed and hold the volume up button and next I connected the tab to usb, but my computer did not detect the tab. I got the following menu on my tab screen:
Press "Volume Up" or "Volume Down" key to select mode. Press "Power" key to enter mode.
1) Upgrade with format data and cache area.
2) Upgrade without format data and cache area.
3) Only format data and cache area.
4) Generate data/user partition image.
5) Power Off
But nothing happens after that....
Please help me....
vasistachoudary said:
Hey guys please help me out... I followed the same instructions as mentioned above, but when I connected my tab to my Windows 7 32 bit computer it did not ask for any drivers, it automatically installed the portable device drivers...
And when I switch off the tab and opened the G+ MP tool and pressed the reset button and then I had pressed and hold the volume up button and next I connected the tab to usb, but my computer did not detect the tab. I got the following menu on my tab screen:
Press "Volume Up" or "Volume Down" key to select mode. Press "Power" key to enter mode.
1) Upgrade with format data and cache area.
2) Upgrade without format data and cache area.
3) Only format data and cache area.
4) Generate data/user partition image.
5) Power Off
But nothing happens after that....
Please help me....
Click to expand...
Click to collapse
when u hold your volume + button, u must not leave the button untill the windows detect ur tab.
By the way, is that zync z930 tablet or some other tab.?
If u have z930, i have the PDF file which u can use to easily upgrade to JB.
It has detailed steps, sent by zync customer care to upgrade.
arunal_123 said:
when u hold your volume + button, u must not leave the button untill the windows detect ur tab.
By the way, is that zync z930 tablet or some other tab.?
If u have z930, i have the PDF file which u can use to easily upgrade to JB.
It has detailed steps, sent by zync customer care to upgrade.
Click to expand...
Click to collapse
Bro same problem here i hav zync z930 with JB preinstalled but i could not root it by ur method of rooting.I hav tried SuperOneClickv2.3.3
this method also but could not able to root please sugest a way to root.and is there any way to downgrade to ics.
arunal_123 said:
when u hold your volume + button, u must not leave the button untill the windows detect ur tab.
By the way, is that zync z930 tablet or some other tab.?
If u have z930, i have the PDF file which u can use to easily upgrade to JB.
It has detailed steps, sent by zync customer care to upgrade.
Click to expand...
Click to collapse
I did not leave the volume + key button for about nearly 10 min, but my system did not detected the tab. My tab is Zync Z930 only buddy. I followed the same steps as mentioned in the PDF file only....
i have 4.1JB i facing many issue 4.1jb
i have Android 4.1, Jelly Bean .. this version is con't connect( internet) wifi via nokia mob(model:c5-03) .soi want degrade .. Android 4.0(firmware) any one have it plz sent me the link....
many thank's
shubhanvit said:
Bro same problem here i hav zync z930 with JB preinstalled but i could not root it by ur method of rooting.I hav tried SuperOneClickv2.3.3
this method also but could not able to root please sugest a way to root.and is there any way to downgrade to ics.
Click to expand...
Click to collapse
dude, sorry i myself haven't been able to root.
That process was given by Mr. Abdul.
N ya, i would prefer u to not downgrade ur tablet to ICS.
Because ICS in that tab had wifi issue. And as wifi is basic and faster way to connect, stay in with your JB.
N ya, i would let u know, if i'm able to root the tab.
Thanks...
shubhanvit said:
Bro same problem here i hav zync z930 with JB preinstalled but i could not root it by ur method of rooting.I hav tried SuperOneClickv2.3.3
this method also but could not able to root please sugest a way to root.and is there any way to downgrade to ics.
Click to expand...
Click to collapse
vasistachoudary said:
I did not leave the volume + key button for about nearly 10 min, but my system did not detected the tab. My tab is Zync Z930 only buddy. I followed the same steps as mentioned in the PDF file only....
Click to expand...
Click to collapse
Are you using windows 7 32-bit..?
I had used my windows 7 64-bit.
It worked fine.
But when i tried in 32-bit. It didnt read my tab.
N ya, 1 more thing, try to reset properly.
Also if possible do a complete Factory Data Reset.
Then go for that reset pin and try the steps again.
Thanks...try that and let me know.
help
bro I am new to android.so I want to know about 'su binary 'as earlier I told u that I was not able to root but today I tried rootunlocker it.and It say that phone is rooted now.and I find 2 apps install superuser and supers and a su filebin system /bin folder but root check shows 'phone is not properly rooted or configured .please tell any way to sole the issue.
arunal_123 said:
Are you using windows 7 32-bit..?
I had used my windows 7 64-bit.
It worked fine.
But when i tried in 32-bit. It didnt read my tab.
N ya, 1 more thing, try to reset properly.
Also if possible do a complete Factory Data Reset.
Then go for that reset pin and try the steps again.
Thanks...try that and let me know.
Click to expand...
Click to collapse
Mine is Windows 7 Ultimate 32 bit buddy.....
Finally I have flashed my tablet and Rooted by this method.those who are having problem of not detecting the tab while pressing vol + must should sure that there memory card is not inserted otherwise it will be not detected.I was having the same problem but i solved by removing memory card and following step given by abdul
Root successfull
Successfully rooted using adb commands.
Will post the link and steps later....
Hi all,
heres my first post on xda and I just wanna to explain my problem.
I am in possession of a GT-N7105, just bought the USB connection worked perfectly but when I tried to install the CF-ROOT and CWM RECOVERY me no more, the PC recognized the phone.
I state that I had installed windows 8.
First of all I installed Samsung KIES and did not recognize him. I uninstalled Kies and installed the drivers using the NOTE 2 TOOLKIT. Even so, nothing to do. The computer can not find the driver for QUALCOMM CDMA TECHNOLOGIES MSM.
I thought it was an error of Windows 8, maybe a bug, so I formatted the system by installing Windows 7 Professional, downloaded NOTE 2 TOOLKIT and installed the drivers without having the phone connected to the PC. When the TOOLKIT required me to connect to the pc NOTE2, I did. But even here, unfortunately, can not find drivers for QUALCOMM CDMA TECHNOLOGIES MSM.
P.S. The phone in DOWNLOAD MODE is recognized by ODIN and I got it back to the SERVICE FIRMWARE but even so the problem is not resolved.
I also tried to change the usb port but nothing.
I tried to install other versions of firmware via odin but nothing. I do not know what to do. Google can not give me a solution and not XDA.
So I decided to write here publicly to expose my problem. I hope someone of you can help me solve this problem that prevents me from installing the CM10.1!
In advance thank you all.
Delete this.
Sent from my GT-N7100 using xda premium
UtkarshGupta said:
Delete this.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks man! Very helpful!
nerdcorner69 said:
Thanks man! Very helpful!
Click to expand...
Click to collapse
Welcome.
But I can't figure out how that helped you...
Sent from my GT-N7100 using xda premium
Xda community is very helpful! Thanks all!
Found it!
My friend had a similar problem, he could not connect his note to the PC.
The following fixed the issue.
1. install new samsung kies.
2. follow these steps:
From -
http://www.danrichard.com/2013/06/1...nect-to-pc-via-usb-with-unknown-device-error/
"Method 3 – Ensure you have the right settings
By default my phone was already set to the right settings for USB file transfers so I’ll assume most of these ship with the same configuration, hence why I have this as method 2. I found this on a forum and while it did not work for me, it seems a few other folks declared it a success.
Launch the phone key pad on your note and press *#7284# (don’t forget to start with that * symbol!)
When you press the last pound sign (#) this will bring up an option that will allow you to change your USB connection settings (modem or PDA) – change it to PDA.
At the bottom there is a button that says Qualcomm USB. Click on it.
In that menu click on MTP + ADB option.
Save and reset.
Wait for your phone to restart.
Plug the micro USB cable to the Note 2 and the the other end to your PC or Mac
Let your computer down load and install drivers.
Once installing is done, unplug then replug phone.
There should be a USB symbol on your phone in the status bar - click on it. It should ask if you wsnd to use mtp or ptp. Click MTP
At this point your PC should open the phone’s folders in explorer similar to the screenshot above. "
Hope it helps you. keep the faith!
:highfive:
Really thanks man! Finally my usb is working like the first time Thx!
droritos said:
"Method 3 – Ensure you have the right settings
By default my phone was already set to the right settings for USB file transfers so I’ll assume most of these ship with the same configuration, hence why I have this as method 2. I found this on a forum and while it did not work for me, it seems a few other folks declared it a success.
Launch the phone key pad on your note and press *#7284# (don’t forget to start with that * symbol!)
When you press the last pound sign (#) this will bring up an option that will allow you to change your USB connection settings (modem or PDA) – change it to PDA.
At the bottom there is a button that says Qualcomm USB. Click on it.
In that menu click on MTP + ADB option.
Save and reset.
Wait for your phone to restart.
Plug the micro USB cable to the Note 2 and the the other end to your PC or Mac
Let your computer down load and install drivers.
Once installing is done, unplug then replug phone.
There should be a USB symbol on your phone in the status bar - click on it. It should ask if you wsnd to use mtp or ptp. Click MTP
At this point your PC should open the phone’s folders in explorer similar to the screenshot above. "
Hope it helps you. keep the faith!
:highfive:
Click to expand...
Click to collapse
Downloaded the Samsung Mobile Drivers and used Method 3- WORKED FINALLY!
Holy Toledo, you are confused my friend, if your OP is any indication. Understand that XDA is not a noobs forum. Yes, everyone had to start at the beginning, but if a forum wishes to aim for a clientele with a bit higher level of knowledge/experience, there's nothing wrong with that and they have a right to do so, especially with there being a gazillion other Android forums that do handle noob questions. I suspect you don't realize how many things are wrong with your OP, "wrong" in the sense that they reveal a massive level of confusion on several quite basic concepts. To wit: reinstalling the PC's entire operating system as part of a solution toward hooking up your mobile to it is such ludicrous overkill that it is not a wonder people will read it and run in the other direction. Fast . And that's one example of many I could make. None of this makes you a bad person by the way, just a very inexperienced one. The best advice I can give you is to pay your dues a little longer and post to other forums if you must, and use XDA in the meantime as the best reference you can find anywhere on the net. I don't know if you'll ever get this, but down the road others in your shoes will. And I won't be revisiting this thread, so good luck :good:.
Dropped phone, broken screen/digitizer, doesn't respond to touch
Was able to see the screen a bit yesterday but now its almost all black. I mainly just need my photos off it. Tried an RMA to replace the screen but they said they had to wipe everything first
Is there any way I can pull the photos off it? I haven't tried an otg yet, but I also can't see the screen, so im not sure it would help
Is there a screen sharing program I could get w/o first installing it on my phone?
I think my phone may be rooted, i forget if i ever did, but i dont have TWRP installed on it? (i dont super know what that is but i see other people talking about it)
Any thoughts on how to pull photos off it? I tried the adb devices but the cmd prompt doesn't seem to recognize the phone
Im quite sure I have debugging enabled, just coudln't get the file transfer button hit
Adb pull command should work, but you need to sort the drivers first (I'm guessing that's the issue).
Sent from my OnePlus 3 using Tapatalk
Explorer23 said:
Adb pull command should work, but you need to sort the drivers first (I'm guessing that's the issue).
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Ok cool, how would i go about sorting the drivers? o.0
jsaden said:
Ok cool, how would i go about sorting the drivers? o.0
side note.... wth is this image verification lol, ive tried like 30 of them, why is it so hard to post lol ><
Click to expand...
Click to collapse
Sorry, can't give definite answer, I know that I had an issue with drivers (device wasn't properly recognized) and tried pretty much everything that Google suggested ... Until it finally started working. I have no idea exactly what solved the issue, it was over a year and a half ago. The next time I clean installed Windows (10 in both cases) it was smart enough to automatically find right drivers.
So ... I'm guessing Googling something like "OnePlus 3 Windows # drivers" should find something useful?
About image verification: are you talking about anti-bot system that checks if you're human? Wouldn't know much about that, never personally had issues with it, but also very rarely see it on XDA as I'm nearly always checking this forum in Tapatalk app.
Sent from my OnePlus 3 using Tapatalk
jsaden said:
Ok cool, how would i go about sorting the drivers? o.0
Click to expand...
Click to collapse
If you had earlier connected your phone to the PC and authorised the PC connection on your phone, then it is a simple issue of disabling driver signature verification on Win 10 and installing the OnePlus drivers on it. Search for and download the correct drivers to your PC. Hold down Shift key and restart the PC. Choose Troubeshoot>Advanced Options>Startup Options and click Restart. On restarting, there will be a list of options. Choose 7 in the Options or click F7 on your keyboard and you will boot into the disabled mode. Now connect your phone and go to Device Manager in PC. Choose the phone which may be showing up as Unknown or with an yellow flag and right click and choose Update Driver. Navigate to the downloaded driver and install it. Now your phone should be properly recognised. Use adb pull command to copy whatever files you need to. Note that this driver signature verification disabling is temporary and when you restart the PC in the normal way, the PC will go back to the normal mode. But the installed drivers will still function.
Hope this helps.
tnsmani said:
If you had earlier connected your phone to the PC and authorised the PC connection on your phone, then it is a simple issue of disabling driver signature verification on Win 10 and installing the OnePlus drivers on it. Search for and download the correct drivers to your PC. Hold down Shift key and restart the PC. Choose Troubeshoot>Advanced Options>Startup Options and click Restart. On restarting, there will be a list of options. Choose 7 in the Options or click F7 on your keyboard and you will boot into the disabled mode. Now connect your phone and go to Device Manager in PC. Choose the phone which may be showing up as Unknown or with an yellow flag and right click and choose Update Driver. Navigate to the downloaded driver and install it. Now your phone should be properly recognised. Use adb pull command to copy whatever files you need to. Note that this driver signature verification disabling is temporary and when you restart the PC in the normal way, the PC will go back to the normal mode. But the installed drivers will still function.
Hope this helps.
Click to expand...
Click to collapse
Oh wow, do you know if this works on Win7? And also I can't see my screen at all, so could I do adb pull of entire folder or hardrive kind of thing? I mainly just want phots, but i've never done adb stuff so not sure how it works
Had the same issue with my Lenovo P2. Only i didn't have debugging enabled. If you have, screen mirroring should be an easy solution. You could just see ur phone screen on ur computer that way. What helped me was to forceboot the phone to recovery with the hardware buttons, then connect it to ur pc. TWRP will automatically launch MTP. When u backed up evrything, you can wipe ur device through adb
jsaden said:
Oh wow, do you know if this works on Win7? And also I can't see my screen at all, so could I do adb pull of entire folder or hardrive kind of thing? I mainly just want phots, but i've never done adb stuff so not sure how it works
Click to expand...
Click to collapse
I don't know about Win 7. It will work on Win 10. Most likely, this should not be needed in Win 7 at all as the drivers should install whether signed or not.
Regarding copying data, a simple command of "adb pull /sdcard" will copy all the folders, files, data etc to your PC. You can also specify where you want the data copied to, simply add the path to the command above. This will work whether your screen works or not. Of course, there are other methods of copying data, you can search for it if you need it.