Kindle Fire Wont Power On - It was working fine and now will not power on - tried the hard reset - when plugged in I dont even get a light at all - is there anyone out there with a broken fire or know where to get a board and not pay something crazy
I haven't installed anything yet. I powered it up and then powered it down. Hooked it up to let it charge and no light. I have held it for 5 minutes and same thing. I'm guessing the board went out.
Josepho1997 said:
Hold the power for a minute or 2. Did you root it/install any ROM?
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
You're using a wall charger? Sometimes the USB charging doesn't work if the Kindle is completely out of battery. I'd say plug it in to the wall with the charger you got with your kindle, and leave it for a few hours, regardless of whether the light is on or not. Then try again.
Hi
Ichigo said:
Hold the power for a minute or 2. Did you root it/install any ROM?
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
Hi my kindle fire wont turn on at all when i try to install this roms. But after i install it and reboot it
My kindle wont start at all. Is there other way to turn my kindle back on again
Buy a new one
Sent from my Amazon Kindle Fire using xda app-developers app
404-Not Found said:
Buy a new one
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
With all due respect, that's just bad advice. If it is a 1st generation Kindle Fire, then there's no need to send it back. Even hard bricks can be fixed rather easily.
Search the dev forum for Firekit
Related
Use kindle utility on this forum, with kindle off and not connected in utility set boot to normal, it will say waiting for device. Connect kindle turn it on n voila, back to normal.
Sent from my Kindle Fire using xda premium
Or use clockwork, much better, no bugs.
d33dvb said:
Or use clockwork, much better, no bugs.
Click to expand...
Click to collapse
+1 ....plus this dosent look like a development thread
a real fix could be, a flashable zip that resets bootmode using pokey9ks bootmode files... I've been meaning to make it but if anyone else knows how, dive in.
but yup, cwm has no bootloop issues. so that's the real fix honestly.
Sent from my HTC Glacier using xda premium
DJLamontagneIII said:
+1 ....plus this dosent look like a development thread
Click to expand...
Click to collapse
Lol I put it here because it'll get looked at more by people who are in the twrp loop.
Sent from my Kindle Fire using xda premium
try flashing hashes new roms or try dualboot and then you will see cwm bugs
Sent from my Amazon Kindle Fire using xda premium
love yaaa
wetrabbit444 said:
Use kindle utility on this forum, with kindle off and not connected in utility set boot to normal, it will say waiting for device. Connect kindle turn it on n voila, back to normal.
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
Thank you so much. Spent like 3 days trying to fix this and the other things wouldn't work.
I have a Kindle Fire that has TWRP 2.0 installed and the Fire!Fir!Fire! (I think... Yellow Triangle...).
I can power up the device, I see the yellow triangle and then I come to the home screen (slider). At this point it powers off. Sometimes it lets me slide the slider, but it still powers off.
During start-up, if I push the power button when the yellow triangle appears, I get to the TWRP screen. This does not help me as I really don't know how to use TWRP to fix problems.
I am very much a novice and need some help fixing my Kindle Fire.
Have you checked your battery?
Sent from my Amazon Kindle Fire using xda app-developers app
Ixthusdan said:
Have you checked your battery?
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Yes... currently the kindle is sitting at the TWRP screen. It has been on for about one hour.
Have you downloaded a rom on the kindle?
Sent from my Amazon Kindle Fire using xda app-developers app
Ixthusdan said:
Have you checked your battery?
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Okay... I feel totally stupid. The problem apparently was the battery. My daughters charger was plugged into a power strip that was turned off (she is only 11 years old). Anyway... the problem happened even when it was initially plugged into my computer USB. I assume that was due to the fact that it was extremely low on battery power. I noticed that when I was at the TWRP screen it had said batter was 3% (and that was after it had been plugged in for at least an hour). So I waited until it was 10%, unplugged it, and it works fine. It is now charging fully.
Sorry to be a nuisance... thanks for the advice!
Can't get download mode or adb to recognise phone. Am I SOL?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
madeSICC said:
Can't get download mode or adb to recognise phone. Am I SOL?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Can you boot into recovery or Factory Reset mode? Hold volume down + power until Factory Reset screen comes up.
No I can't. Could not even get into recovery after easy unbricking. Phone never acted right after doing that. But now it's all dead.
My computer does make the device connected sound when I plug into computer but can't ever find it with adb
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Well this morning I was able to get into recovery, not sure how but when I plugged into the computer it just came on. But I accidently went to sideload and couldn't do anything from.There so I had to pull the battery . Wasn't ever able to get in back in. But now when I plug it in to my laptop the capacitive lights start flashing. Any clues what that means?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
madeSICC said:
Well this morning I was able to get into recovery, not sure how but when I plugged into the computer it just came on. But I accidently went to sideload and couldn't do anything from.There so I had to pull the battery . Wasn't ever able to get in back in. But now when I plug it in to my laptop the capacitive lights start flashing. Any clues what that means?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
That means its out of battery. Plug it into an AC charger and try again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Dead Battery
rani9990 said:
That means its out of battery. Plug it into an AC charger and try again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
As someone who's taken every chance with his Nitro, I agree entirely. Get that puppy charged and head on over to the unbricking guide:
http://forum.xda-developers.com/showthread.php?t=1597488
It's a pain, but it seems like you'll eventually have to do this anyway if you're interested in installing any roms
Ive tried to install a different boot animation and installed and different rom but nothing has worked.
If you are running cm10.1 that is a known bug that you can't do anything about.
You really need to be more clear in what your problem is, and what you want to know.
Sent from my Amazon Kindle Fire using Tapatalk HD
jma9454 said:
If you are running cm10.1 that is a known bug that you can't do anything about.
You really need to be more clear in what your problem is, and what you want to know.
Sent from my Amazon Kindle Fire using Tapatalk HD
Click to expand...
Click to collapse
ok thanks for the info, I will take that into consideration.
every time i do phone mode, the nav buttons don't appear.
Sent from my Amazon Kindle Fire using Tapatalk HD
Was this after you messed with DPI?
Sent from my Kindle Fire with Tapatalk HD.
Just because I am a Senior Member doesn't mean anything.
I do not count myself any higher than anybody else.
Vlasp said:
every time i do phone mode, the nav buttons don't appear.
Sent from my Amazon Kindle Fire using Tapatalk HD
Click to expand...
Click to collapse
This will be fixed in the next build.
jma9454 said:
Was this after you messed with DPI?
Sent from my Kindle Fire with Tapatalk HD.
Just because I am a Senior Member doesn't mean anything.
I do not count myself any higher than anybody else.
Click to expand...
Click to collapse
I reinstalled the rom after i did the lcd dencity changes. I did this to install a cm10.1 theme.
twa_priv said:
This will be fixed in the next build.
Click to expand...
Click to collapse
thanks.
Sent from my Amazon Kindle Fire using Tapatalk HD
It worked after a reboot.
Sent from my Amazon Kindle Fire using Tapatalk HD