Anyone else had this happen? It's a Telstra phone with the latest Telstra ROM on it, and it used to work perfectly but I recently changed providers and it doesn't work any more - I know the data connection is still OK though as browsing on the phone still works.
Not sure if it's provider blocking (but that's sooooo 2009) or if the phone itself is hard coded to use the 850MHz band for tethering or something? The error I get is simply "Error APN" - but I know the APN is correct (it's just 'internet').
You're trying to USB or wifi or BT tether the data cxn on your phone to your PC, yes...?
I guess I'm confused as to why an APN even comes into play here.
This is with USB tethering - the same as it always used to work - you plug it into the PC, select Internet on the phone and after a few seconds the PC has access to the internet. File access works fine, internet connection on the phone works fine, just not when tethered as a modem.
I've also loaded GBX0C and Windows can't recognise the device when I'm running XDA (via USB or wifi tethering - it's a desktop PC so no BT) so I can't easily test if it's the ROM or the hardware.
Nukkels said:
This is with USB tethering - the same as it always used to work - you plug it into the PC, select Internet on the phone and after a few seconds the PC has access to the internet. File access works fine, internet connection on the phone works fine, just not when tethered as a modem.
I've also loaded GBX0C and Windows can't recognise the device when I'm running XDA (via USB or wifi tethering - it's a desktop PC so no BT) so I can't easily test if it's the ROM or the hardware.
Click to expand...
Click to collapse
Please, let's keep troubleshooting to WinMo in this section... If you have an issue with a particular Android build, post in that build thread.
As for USB tethering in WinMo - when you select "internet", what happens? Do you get the noise on your PC like you've connected the phone or...? Have you tried a different port, and/or a different cable?
OK, I'll leave Android out of this - I just mentioned because it didn't help me narrow it down.
The PC makes the noise like I've connected a USB device as normal. Actually it does that twice, but that's quite common for a lot of devices. Then on the phone I get a popup window - the title bar says "Cannot Connect" and the message is "Error APN". I've tried different ports (even on a PCI-E card instead of onboard) and different cables. They shouldn't matter though as the only thing that changed was my provider.
I realise this this isn't a generic support forum though so I'm not looking for troubleshooting. I'm just wondering if anyone else has come across this with a Rhod110 - there's a lot of minor differences in this version, as I discovered when trying to get Android running. Or maybe even someone with some deeper knowledge of the OS knows if the tethered internet connection does anything different to a 'normal' 3G connection.
Hrm, I'm CDMA... so I guess I'll bow out. I've never seen/heard of those error messages when trying to tether, but GSM is quite different than CDMA in terms of data connectivity. CDMA doesn't have APN's .
Decided to do a quick search...
http://forum.xda-developers.com/showthread.php?t=571832
See if that works.
Cheers for that pointing me to that thread - it was indeed just a registry entry hardcoded to Telstra.
Leaving it blank allows me to get a couple of error messages and then eventually select a connection from the list and from there I figured out it just used whatever the connection name is (user-defined). Set the registry entry to that and now it's working just as it always used to.
I wonder how many other functions Telstra has dug it's claws into?
Related
Hi,
i am currently trying to tether my tp2 with my mac book. With the xda orbit i had before the tp2 this was no issue at all however i cant seem to get it to work with the tp2. Problem is that the tp2 doesn't seem to advertise its PAN functionality anymore when the devices are paired. So the macbook thinks the tp2 doesn't support PAN. Now when I use the internet sharing app on the tp2, it tries to connect to the macbook and then tells me that the macbook wouldn't support PAN and therefore the connection cannot be shared. On the xda this worked slightly different: the xda would open up a PAN when I started internet sharing. Then i told the macbook to connect to this PAN. So i have a catch-22 here. Any ideas on how I could get this to work?
thank you,
Kork
On a funny sidenote: this worked yesterday for a few minutes. I activated connection sharing on the tp2, and it asked me where to connect to, i selected the macbook, et voila... This was actually even better than on my XDA as I could connect in a single step.
Today i just get the message that the target system (my Macbook) would not support PAN and therefore no connection could be made - which is an outright lie...
Called HTC about it. They were actually clueless and recommended to hard reset the device. Well I got all the time in the world, did a hard reset, no change. This still remains not working. Has anyone a working bluetooth tethering between the TP2 and Mac OS X?
Had a nice talk with Apple Support for half an hour now. We tried the usual stuff, and the guy was very friendly and trying to help me, but the bottom line was "we do not support windows mobile phones, htc has to make it work with a Mac". This came not totally unexpected though. So back to square one, I am not yet giving up. But no tethering is a blocker...
Okay, guys we are getting closer. I digged deeper into the Bluetooth Settings of Mac OS X and found out that the PAN set up is stored in com.apple.Bluetooth.plist in /Library/Preferences on the Mac. With my old XDA paired, i got some Entry in there called PANDevices and the Device-ID of the XDA in that list. The Device-ID of my TP2 was not in there. So i manually added the Device-ID of my TP2 and guess what - Tethering Happyness . Problem is, on any reboot, the setting gets lost. So i am going to write a small script that fixes the plist file. I'm doing a bit of testing as well, to see if this is really the fix, but I'm getting close.
Seems that wasn't it either. It seems that the restart of Mac OS X's bluetooth daemon actually did the trick, the changes in the file were actually pointless. So now I got reproducible behaviour:
1. Restart Computer
- Connection sharing from TP2 to Mac doesn't work.
2. Restart the bluetooth daemon
- sudo killall -HUP blued
3. In bluetooth preferences, click Advanced and tick "Share my internet connection with other bluetooth devices"
4. Start the internet sharing application on the TP2. Now it works. You have to repeat steps 1 to 3 if you reboot your Mac.
Going to give Apple another call, as this clearly looks like some bug on Mac OSX side.
This is exactly why if I get the TP2 I will be keeping my n78 or e71 as a backup phone. With Joiku Spot it makes it so easy to tether. Actually, I wonder if there is a program like Joiku Spot that would do this.
For those who don't know, Joiku Spot makes your phone a wireless hub, and creates a wireless network which your computer can attach, thus using the internet from your phone on your computer. I have a macbook, and with Joiku Spot, i'm getting roughly 1800 download speeds on my mac when i'm tethered.
There is: http://www.joikushop.com/?action=products&mode=productDetails&product_id=265 - > WMWifiRouter.
However, having WiFI + UTMS is going to drain your battery pretty quickly, that's why i use bluetooth all the time, which makes the device last much longer. But i guess the WIFI option would be more compatible with all kinds of OSes...
Yes, but when I am tethering i generally have access to a plug outlet so i have no problem plugging my phone in while i'm using it as a wifi hot spot. I was using my e71 via bluetooth on both OS X and XP and my speeds are doubled with using wifi. bluetooth can only transfer so fast.
Well i use it a lot on train rides where you can consider yourself lucky if you got an outlet for your laptop let alone one for your mobile phone... So bluetooth is the way to go...
You could use a USB charge cable to keep your phone powered off of the laptop battery, while using WMWiFiRouter or any other similar program for your connection.
Although I guess if your trying to have all this done wirelessly, that kind of defeats the purpose.
That would be a good reason! but, TP2 supports usb charging, so that shouldn't be a problem. Then, you can plug your laptop in at work or wherever you're going!
Just read what Tecknik said, so it's about the same!
TP2 tether to macbook pro
Hello, I'm also trying to get my tp tethered to macbook. There is an option under BT in Mac to specify username and a phone number to use BT to connect to a modem, do i need to specify any of this information? OR do I just need to select to "share internet with other BT device" on the mac?
Kork said:
Seems that wasn't it either. It seems that the restart of Mac OS X's bluetooth daemon actually did the trick, the changes in the file were actually pointless. So now I got reproducible behaviour:
1. Restart Computer
- Connection sharing from TP2 to Mac doesn't work.
2. Restart the bluetooth daemon
- sudo killall -HUP blued
3. In bluetooth preferences, click Advanced and tick "Share my internet connection with other bluetooth devices"
4. Start the internet sharing application on the TP2. Now it works. You have to repeat steps 1 to 3 if you reboot your Mac.
Going to give Apple another call, as this clearly looks like some bug on Mac OSX side.
Click to expand...
Click to collapse
TP2 tether to macbook pro
HI Kork, do you know how to do the same thing but through a USB cable to tether TP to Macbookpro OSX?
Kork said:
Seems that wasn't it either. It seems that the restart of Mac OS X's bluetooth daemon actually did the trick, the changes in the file were actually pointless. So now I got reproducible behaviour:
1. Restart Computer
- Connection sharing from TP2 to Mac doesn't work.
2. Restart the bluetooth daemon
- sudo killall -HUP blued
3. In bluetooth preferences, click Advanced and tick "Share my internet connection with other bluetooth devices"
4. Start the internet sharing application on the TP2. Now it works. You have to repeat steps 1 to 3 if you reboot your Mac.
Going to give Apple another call, as this clearly looks like some bug on Mac OSX side.
Click to expand...
Click to collapse
I used to be able to tether fine about a week ago but now i'm getting the following msg:
"failed to establish internet sharing connection to remote device as it supports only network access point (nap) mode"
any thoughts? there is a bluetooth pan connection in network settings on my macbook. I've deleted it and recreated with no luck.
and "share my internet connection..." is checked in my device's advanced options from the bluetooth settings on my macbook.
fone_fanatic said:
"failed to establish internet sharing connection to remote device as it supports only network access point (nap) mode"
Click to expand...
Click to collapse
That's the message i get all the time after rebooting. You could try the steps I described above, this usually makes it work for me. Until next reboot, though.
Kork said:
There is: http://www.joikushop.com/?action=products&mode=productDetails&product_id=265 - > WMWifiRouter.
.
Click to expand...
Click to collapse
I Tether on all my MacBook/Netbook using WMWiFiRouter all the time.
Just enable Wifi on your Mac and it autodetects some PAN settings -even on the airport card. Give this app a try.
This has known to work on Tiger and Leopard. Never tried it on SnowLeopard though.
Well sounds easy enough. However isn't Wifi eating up your battery like a starving ogre?
Killing BT with Terminal worked great. I have been struggling with this problem for a couple of days now. Nice work. Very much appreciated. I am going to link to this solution from my post. I did not yet verify the failure to function after reboot but I will test that. I'd love to have a script that does this automatically.
myknyte said:
I Tether on all my MacBook/Netbook using WMWiFiRouter all the time.
Just enable Wifi on your Mac and it autodetects some PAN settings -even on the airport card. Give this app a try.
This has known to work on Tiger and Leopard. Never tried it on SnowLeopard though.
Click to expand...
Click to collapse
WMWiFiRouter eats up way too much battery, faster then the device can charge via USB (and my USB charing isn't working but thats another story)
Kork said:
That's the message i get all the time after rebooting. You could try the steps I described above, this usually makes it work for me. Until next reboot, though.
Click to expand...
Click to collapse
Thanks, worked just fine.
Is there a way we can create a script to place on the desktop so we can just open up a shortcut that will automatically do this?
Hello, I have been searching around for a day and a half now to no avail. I figure I will ask here as a last attempt before I go and buy another USB wifi adapter.
I am trying to use my HTC Dash with WM6.5 to tether an available wifi connection over to my Windows 7 PC. Basically trying to use the phone as a wifi adapter. The phone has no cell data service, but can connect to the home wifi network that is here. My Windows 7 PC has no Wifi adapter (I left it behind >.<).
Here is where I am at. The HTC Dash is connected to the Wifi network, and when I try to select a Network in the ICS program, it says there is none available. I have been able to get USB selected in ICS, and the phone connected to the computer. In Windows I see a Windows Mobile Remote Adapter in the Network Connections area when I sync the device in Windows Mobile Center. But no matter what I try, ICS sharing on the phone will not let me select the Wifi connection it has.
Through my searching I have found a lot of information on tethering 2G and 3G internet through USB, and using the phone as a Wifi Hotspot. But those where no help in this.
My friend on a G1 with Andriod can tether Wifi connections to a pc, and I am wondering if Windows Mobile can do the same thing. I can flash my ROM from to 6.0 or 6.1 WM if needed.
Thanks in advance to any advice given, hopefully someone can help me out
UPDATE: Still have no luck. I found a program called ICS Control v.21, but it only works on touchscreen WM phones, not WM standard. Which means a bunch of crashing.
This program would do exactally what I need it to do... just does not support my phone. Well the search continues... looking like I may just have to go buy an USB Wifi adapter soon.
tethering w/wifi
It does work. I'm currently answering this on my 2nd desktop Vista with my S620 via my home wifi network. Waiting for a 25' ethernet connector to hardware to wifi/modem Not quite sure how it is with a wifi adapter but 2 things I do know from experience. You shouldn't need an adapter.
1st: you can't be in Sync Center while trying to tether, at least in my case on a Vista desktop. It won't let you tether while the sync is running (or your already synced).
2nd: (this worked for me) open internet sharing on your Dash/S620, pc connection-usb and be ready to hit connect the 1st couple of seconds after pluging your usb connector into your phone, and give it 10-20 seconds to actually connect. If you wait to long to hit connect, the phone will start syncing with the computer. Won't let you tether.
RE-read post, missed thar "WinMo" remote part. My bad. Don't own Win 7. Don't know what that is.
Question: Is there an active wifi where you are ? From your post it sounds like "yes"
You do not need a wifi adapter. You do need a USB cord.
I tethered with edge for a bit, but then got to thinking. Try Wifi. It worked, but be quick.
Neither one is super fast but Wifi is definitely faster than Edge. Better than not being on the net at all. Occasionally it'll cut out, just unplug usb, get to connect screen, plug in and hit connect. Should be set.
As a side note: I also tried tethering with G1. Xferd pc driver to Vista from G1 but computer says it can't find the driver. Gave up after 2 hours.
G1 tethering works great on XP though.
Hope this helps. Good Luck. Really cool when it works.
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
ee.mike said:
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
Click to expand...
Click to collapse
I'll have to break out the Dash again and let you know. It's been sitting for weeks since I repaired LCD screen and flashed my TMO Wing. Can't seem to stop playing with it.
Give me a little time and I'll get back to you.
You do have a wifi modem, correct ? I was using usb.
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
ee.mike said:
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
Click to expand...
Click to collapse
Well, in your case, I won't be any help. What I did was run a 2nd computer off of my Dash with a Wifi Modem.
XP in another room with a wifi modem attached on Comcast, Dash on wifi and usb to Vista computer, since I didn't have a 25ft ethernet cable at the time.
Was running Vista-Dash-wifi modem-XP to comcast so I could run 2nd computer without being hard wired.
I'm familiar with wifirouter cab. It let's you use your phone like a hotspot, correct ?
In all my searches for various things for the phones, I thought I saw a different application that did the same thing. Possibly might even have it. I'll check and upload for ya if I find it. Have hundreds of cabs/zips to search. Let you know.
Possibly google it and you might find it yourself. There's a program called: WalkingHotSpot online for $24.99 if you don't mind spending. Dash isn't listed as a supported windows device but looking at the other phones listed my guess would be it should work. Try their DEMO version, see if it works.
Good Luck.......
2AM and I was just wondering......When you received your phone, you also got a usb cable with it, right ?
Why don't you just usb Dash to laptop and use "internet sharing" ????
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
ee.mike said:
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
Click to expand...
Click to collapse
Do you have a home computer ? If so, get yourself a Wifi Modem and set up a home network. $40-60. Although Comcast sold me mine for $20 and I get to keep it. I can get all 5 phones on the internet at the same time, not that I need to. It'll also be so much faster then running thru Edge. Besides the fact video's don't play for crap tethered running through Edge. Just a suggestion.
My opinion stands concerning Apple. Get ready to cough up more fees for internet (ATT). They're doing away with unlimited data. Did you see their prices ?
You'll never catch me with ATT.
I just put WMWifiRouter on my TMO Wing 6.5. let you know how it worked. Setup went fine, so far.
did you try downloading the actual .cab from WMWIFIROUTER.COM it's only a trial for 21 days, the "Free" versions don't work on the dash i've tried many of them.
once you install and get it set up be sure to write down the Access ID and Password it gives you so you can connect to the WiFi signal beaming from your phone from your PC. It works for me to tether a WiFi connection from my Dash to PC though I prefer the more stable Internet Sharing USB to PC and I have an Unlimited Data Plan.
WMWIFIROUTER also lets you tether a connection from your phone via bbluetooth.
I use WMWiFiRouter and its a life saver. It lets you pretty much tether any connection to any other.
Just yesterday I was at a meeting in a resturant with some clients and used it to hook my netbook to the internet and used bluetooth as the connection to the phone. Yes, Internet Sharing can do that, but it has alot more it can do too.
You can use Bluetooth, USB (it shows up as a USB modem), or even set it up as a WiFi Router.
Very cool program and it works perfectly on the Dash. I love it.
I never tried the trial version. A friend of mine showed it to me, so I just bought it. It's under $20. Well worth it if you run into that situation often.
Hey guys, I've activated the Froyo Sense wifi hotspot feature, and while my XP laptop can easily see the network and connect, it can't actually receive any data. I've checked the HSPDA on the phone and it's fine; but trying to view a website on my laptop in Firefox when connected just does work, it just keeps saying 'looking for', e.g. 'looking for google.co.uk'. I'm on T-mobile UK in case that's relevant.
Does anyone else have any issues?
Make sure that you have DHCP enabled and also automatic DNS detection. For me (Vista laptop, phone on Vodafone NL) it works fine.
And it may also be that T-Mob is somehow detecting what you are trying & then blocking it...
In the end I ran Windowx Xp network diag repair and that finally seemed to fix it. Weird, never had any issues with any other hotspots I've tried using! Very strange, although I did notice the IP address Froyo gave my laptop was exactly the same that my normal router serves up, maybe this was the issue and Windows just got a bit confused, poor thing...
So I've been using the Tom coding package that installs the mobile Wi-Fi router with no problems until last night... now it keeps trying to connect to ISP.Cingular and then stops... it basically doesn't work now. I've tried to uninstall and reinstalled it dozens of times with no luck.
And yet... the 3G connection works because I can browse through Opera. So...?
OhI might add that I can turn on the Wi-Fi and connect to my in-house router just fine and do what on the internet through the phone. SO... it is definitely something specific with wireless internet sharing.
???
Someone please he me I use internet sharing DAILY
You need to make sure that it is connecting to the correct address. At the bottom of the App, it should have a few different choices of connections to use. Try another one and see if it works. You may have to set up a new connections for this to work properly. Keep in mind that tethering/mobile hotspot is not covered by AT&T's wireless data plan. It is a separate monthly charge. You should be careful when using it too much at a time, so they don't block or throttle your connection.
The device I am trying to connect with to my Tilt 2 is a Samsung Galaxy Tab, and apparently it doesn't like ad-hoc, whatever that is exactly. I was told on the Galaxy Tab section of this forum that this is the case, and that I need some kind of "mobile ap", although again I do not understand what that exactly means. ???
Ah, see that's much better information. So, no, you probably won't be able to connect without another app doing so. Ad-hoc is, simply put, a connection to another device other than a router which is allowing you access to its Internet connection. If the device you're trying to connect with doesn't allow ad-hoc connections, then the Wifi Router app won't do you any good, as that is the type of connection it uses. Most mobile devices do not natively support this, however. The problem, therefore, is with the Galaxy Tab you have, not with the TP2. Find an app or mod that allows for ad-hoc connections and you'll be all set.
Well is there an apparently for the WM phone side of things that will do non ad-hoc??
No. Ad-hoc is a connection between two devices. Unless you use a router, that's how it's going to be no matter if you are using WM, a laptop, iOS, Android, et cetera. The connection type is determined by the device sending the signal. If it comes from a device, then it is ad-hoc. It is not a problem with the software. That is how wifi was designed to work in the first place. The problem, again, is with the Tab, not the WM application.
Well apparently there is a solution for the Tab that allows it to see ad-hoc networks, so I will try that and let you guys know how it went.
Can no longer connect to Ad-Hoc with Tilt 2
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.
All, I've been searching my brains out looking for a solution.
I am on the Jedi Elite Rom, coming from the Wicked Rom both with SaberKernal 9.5. I cant get the MHS to work with either ROM (With WIckedm it worked for a day or so and then stopped)
I can get the phone to connect to my tablet (Asus 300TF) but no internet access. The Mobile Hot spot settings show that the tablet is connected and talking.
Thinking that there may be an app that's causing the trouble, I just did a fresh install of the Jedi Rom completely barebones - in the installer, I didnt select any apps, mods, etc. I have also tried connecting to my laptop, and the same thing will happen. The phone will connect to the laptop but no internet access
What's blocking my access? Is it the Kernal?'
Edit: I just switched to leanKernal and that made no difference. Also, I have tried connecting with the MHSP both Open and default security
Google is the only site that works on both my PC and tablet. Same thing with USB tethering on the laptop. The laptop recognizes the phone as a modem, says I have an internet connection, but wont push any data through EXCEPT Google.com
I just got off the phone with T-Mobile tech support and they made me turn off the LTE now I am just on 4G with APN epc.tmobile.com That worked but the tether connection is stupid slow. They put a ticket in for me. Any help woud still be appreciated