Hey guys, I've activated the Froyo Sense wifi hotspot feature, and while my XP laptop can easily see the network and connect, it can't actually receive any data. I've checked the HSPDA on the phone and it's fine; but trying to view a website on my laptop in Firefox when connected just does work, it just keeps saying 'looking for', e.g. 'looking for google.co.uk'. I'm on T-mobile UK in case that's relevant.
Does anyone else have any issues?
Make sure that you have DHCP enabled and also automatic DNS detection. For me (Vista laptop, phone on Vodafone NL) it works fine.
And it may also be that T-Mob is somehow detecting what you are trying & then blocking it...
In the end I ran Windowx Xp network diag repair and that finally seemed to fix it. Weird, never had any issues with any other hotspots I've tried using! Very strange, although I did notice the IP address Froyo gave my laptop was exactly the same that my normal router serves up, maybe this was the issue and Windows just got a bit confused, poor thing...
Related
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.
No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil
I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)
efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!
I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!
I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel
I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....
Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.
I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?
WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK
Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel
As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel
Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel
No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?
Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??
Hi,
I'm using WiFi at home, hosted by a Linksys WRT54GL router running OpenWrt and secured with WPA2/WPA-PSK. Once in a while, the WiFi connection to my Rhodium gets disconnect (phone issue, wifi on my notebook is stable). After this disconnect, I go to the notification list, and theres a notification telling my that theres a new network found, but to connect to the network, I need to enter the WPA password everytime. Only way avoiding to reenter the password is rebooting the device; then it automaticly connects to my network again.
Anyone having similar problems or even know a fix?
Thanks in advance,
Christoph
same...
I got the same problem, and i got the same router as you with WPA2... It's really anoying. Is it a settings issue on the phone or what?
Wifi Issues with Smartphones / PDA WEP and WPA
I've been a windows mobile / smartphone user for about 4 years now. I started off with a xw6700 from verizon, then a Tilt from ATT, and now testing a Touch Pro 2 from t-mobile not sure if I'm keeping it. With each device I've had the same issues. I will explain below what I've found and what I've done to make it as painless as possible with WIFI and my PDA devices.
I currently run 2 WIFI networks due to this issue. I use roadrunner so I was able to about 10 years ago get a multiple IP package, which they no longer offer. I have 4 IP addresses 3 of which I use for my computers/1 wifi network and another I use for a wifi network just for PDAs/phones.
If i use a PDA with WIFI enabled on the network my computers are on using WEP after a few times of connecting/disconnecting PDAs and trying to reconnect I get a problem where the device wont take my WEP key over and over again. I have to reboot the WIFI router, and then the device will connect successfully. This is very annoying since any device I try to add to the wireless will not connect as well. This problem is due to the PDA, now I've tried mulitple routers DLINK, NETGEAR, LINKSYS, AIRLINK, they all do the same.
Now with my 2nd network I use WPA. WPA seems to be more friendly when it comes to disconnecting and reconnecting PDAs. I can use my PDA's on this network connecting and reconnecting for a few weeks before the WIFI router requires a reboot because it will no longer take the WPA password. Again I am not sure why this happens, and I am not sure why it affects WM5, WM6, WM6.1. Not sure if its the hardware of the device or the software, but it seems to happen no matter what WM device I have.
My iphone will disconnect and reconnect to either of my networks without any problem. Unless the PDA screws up the wifi on either network, then the iphone will never authenticate and connect to the network. Seems these WM devices no matter what hardware are really good at screwing up WIFI networks.
Now my findings are every time you put the phone to sleep/off the wifi turns off, it could possibly be the cause for the above, this pisses me off. There was one forum a while back I found someone saying WPA is more stable. I know the iphone does the same (turns off wifi when in standby/sleep), but doesn't affect the router the same as WM devices. If anyone would like to say otherwise then they are wrong/lying to you. I guarantee if they turn off and on their WM device to say check an IM or a TXT and turn it back on a few times they will experience the same problems above, which it seems everyone experiences but no one has answers.
I wish there would be a professional from HTC or HP or anyother PDA maker who will just come out and say they screwed up and didn't want to fix it.
So I've been using the Tom coding package that installs the mobile Wi-Fi router with no problems until last night... now it keeps trying to connect to ISP.Cingular and then stops... it basically doesn't work now. I've tried to uninstall and reinstalled it dozens of times with no luck.
And yet... the 3G connection works because I can browse through Opera. So...?
OhI might add that I can turn on the Wi-Fi and connect to my in-house router just fine and do what on the internet through the phone. SO... it is definitely something specific with wireless internet sharing.
???
Someone please he me I use internet sharing DAILY
You need to make sure that it is connecting to the correct address. At the bottom of the App, it should have a few different choices of connections to use. Try another one and see if it works. You may have to set up a new connections for this to work properly. Keep in mind that tethering/mobile hotspot is not covered by AT&T's wireless data plan. It is a separate monthly charge. You should be careful when using it too much at a time, so they don't block or throttle your connection.
The device I am trying to connect with to my Tilt 2 is a Samsung Galaxy Tab, and apparently it doesn't like ad-hoc, whatever that is exactly. I was told on the Galaxy Tab section of this forum that this is the case, and that I need some kind of "mobile ap", although again I do not understand what that exactly means. ???
Ah, see that's much better information. So, no, you probably won't be able to connect without another app doing so. Ad-hoc is, simply put, a connection to another device other than a router which is allowing you access to its Internet connection. If the device you're trying to connect with doesn't allow ad-hoc connections, then the Wifi Router app won't do you any good, as that is the type of connection it uses. Most mobile devices do not natively support this, however. The problem, therefore, is with the Galaxy Tab you have, not with the TP2. Find an app or mod that allows for ad-hoc connections and you'll be all set.
Well is there an apparently for the WM phone side of things that will do non ad-hoc??
No. Ad-hoc is a connection between two devices. Unless you use a router, that's how it's going to be no matter if you are using WM, a laptop, iOS, Android, et cetera. The connection type is determined by the device sending the signal. If it comes from a device, then it is ad-hoc. It is not a problem with the software. That is how wifi was designed to work in the first place. The problem, again, is with the Tab, not the WM application.
Well apparently there is a solution for the Tab that allows it to see ad-hoc networks, so I will try that and let you guys know how it went.
Can no longer connect to Ad-Hoc with Tilt 2
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.
Hi,
Since i've had the One X i've had nothing but problems with tethering. I've tried wifi, bluetooth and USB. All seem to suffer from the same problem.
The problem being that the phone will have a working mobile internet connection (I can use the phone to talk to the internet without problem) but my netbook cannot talk to the internet. The problem is definitely not with my netbook or the connectivity between the phone and the netbook as I can ping the phones IP address just fine.
It's almost like when tether is enabled some sort of forwarding or bridging between wifi/bluetooth/usb and mobile internet should be enabled but isn't being.
Then, totally randomly, it will just start working fine.
Sometimes disconnecting mobile internet and reconnecting fixes it. Sometimes enabling airplane mode and then disabling it fixes it. But most of the time I literally have to just wait until the phone decides to start forwarding my packcets to the internet.
I travel by train to/from work and used to tether my HTC Desire using wifi or usb. It would generally be useable for the whole journey except when I lost signal entirely or when the phone switched between Orange and T-Mobile whilst I was in the middle of something.
I guess my main questions are:
Is anyone else having this problem?
Can anyone think of a way I can try to debug what's happening?
Does anyone have a possible solution?
Thanks
ashak said:
Hi,
Since i've had the One X i've had nothing but problems with tethering. I've tried wifi, bluetooth and USB. All seem to suffer from the same problem.
The problem being that the phone will have a working mobile internet connection (I can use the phone to talk to the internet without problem) but my netbook cannot talk to the internet. The problem is definitely not with my netbook or the connectivity between the phone and the netbook as I can ping the phones IP address just fine.
It's almost like when tether is enabled some sort of forwarding or bridging between wifi/bluetooth/usb and mobile internet should be enabled but isn't being.
Then, totally randomly, it will just start working fine.
Sometimes disconnecting mobile internet and reconnecting fixes it. Sometimes enabling airplane mode and then disabling it fixes it. But most of the time I literally have to just wait until the phone decides to start forwarding my packcets to the internet.
I travel by train to/from work and used to tether my HTC Desire using wifi or usb. It would generally be useable for the whole journey except when I lost signal entirely or when the phone switched between Orange and T-Mobile whilst I was in the middle of something.
I guess my main questions are:
Is anyone else having this problem?
Can anyone think of a way I can try to debug what's happening?
Does anyone have a possible solution?
Thanks
Click to expand...
Click to collapse
Try resetting your APN setting back to default. This should fix the issue. You may have to do this everytime at OTA update is applied.
I have a Rogers M8 that I have converted to a GPS currently with 5.0.1 from here.
It's been running seamlessly for quite some time.
I just tried hotspoting it. Everything appears to be working.
I'm using a mac, when I connect to the hotspot everything looks good. But no Internet connection.
I tried an nslookup Google.com and was Refused.
Any ideas?
Oh, and fwiw, my network provider (roam) does not block tethering
Check to see your mac is authenticated in the hotspot. Its a mini router so it should work almost the same.
Also try another device to check whether or not its just the mac thats causing an issue.