Develop Bugs

4G force app

Icant seem to find a way to force my g2 to stay in "4g"
Ihave full conection it just keeps bouncing back and fourth
Between 3g and 4g .. any help?

I dont know but all the roms do that and it does that to save battery, if it stays in 3G it means its just saving battery but when you go to an app that requires the web it goes to 4G for fasters speed.
So basicly devs made it like that to make your phone save battery.
My guess, dont quote me on that.
Sent from my HTC Vision using XDA App

It switches whilst iam using the browser
And ialways get page load fails
Its switching as itype this
And when iuse my tether it still switches ..its rather annoying

What I did was download the app any cut and make a shortcut to the phone info setting. Once in there just switch from wcdma perferred to wcdma only and that should do it
Sent from my Htcclay's SuperCM7 G2 using XDA App

:O that worked. thanks

wait no it didn't.. it worked for a couple hours-__-

xXReubenXx said:
wait no it didn't.. it worked for a couple hours-__-
Click to expand...
Click to collapse
*#*#4636#*#*
it will work until you negotiate a new tower, iirc.

Same
Sent from my HTC Vision using XDA Premium App

That happened fo me too. But I was getting the speed without the icon...it was only when it switchdd that it would f up. I just switchdd radios and downloaded the 4g app pack and it helpdd but didnt fix (only happendd with a couple roms) and on other roms it will say 4g but its a 3g speed...and that ciuld just be the nature of the beast...

Can't believe no one else in the know has commented on this. You c ant force it. PERIOD. That is not how hspa works. The phone plays a small part in the switch but MOST of it is up to the towers discretion. The tower switches you to hspa when the data throughput warrants it. This is a fact not just some crackpot theory. Save your time!
Lol to the person who said devs made it that way. Not making fun just laughing
Sent from my HTC Vision using XDA Premium App

How do I turn on 3g for skgo?

I downloaded skygo onto my nexus, I keep getting a message stating 3g streaming is not enabled.
I'm on full bars connectivity, data enabled, 2g unchecked, I see h and 3g on the signal, can't see what else I'm supposed to do.
Any ideas?
Sent from my Galaxy Nexus using xda app-developers app

[Q] CM10.1 1/15 LTE issue

Hey,
I am using ATT s3 with CM10.1 1/15.
I used to get LTE, and now I have a problem.
Most of the time I get 3G or H or H+, then if i disable and enable LTE I do get it, but then it reverts back to 3G or H or H+.
And every time I want LTE I have to disable enable it.
Anyone else has the same problem?
Ts there a fix?
Thank you

Try flashing a different modem
Sent from my SGH-I747 using xda app-developers app

Cm10 and CM10.1

What is the trick to get the mobile data to kick in. The signal bars show signal but they are greyed out, not blue like when connected. I tried updating profile and prl but cannot connect even tried over WiFi but no luck. Sprint GNex GA02 modems.
I never had this problem with my OG Epic4g
Sent from my Galaxy Nexus using xda app-developers app

You have your Google account syncing?

No will not connect.but not getting 3g services im stuck on 1x flash any other rom and I'm good sprint profile updates signal is there all blue lit up
Sent from my Galaxy Nexus using xda app-developers app

The evdo never kicks in and I have mobile data turned on
Sent from my Galaxy Nexus using xda app-developers app
The pick is not of the issue but that is what the bars look like this us pa3 with mobile data off

Try different radios. Fh05 work much better than ga02 for me

Ya in my area I don't have 4g yet so I rely on 3g for everything
Sent from my Galaxy Nexus using xda app-developers app

Happened to me on BB7 and the fix was to change from LTE/CDMA to just CDMA (or vice versa) uncheck mobile data wait 15 or so seconds then turn it back on and then if/when I saw the 3g icon Id update profile then prl.

I have tried that, and mine still isn't blue. I switched from TouchWiz to CM10 last week and at first, the signal bars and WiFi indicator were both blue. Now they are grey. And yes, my Sync is on.

Conundrum1984 said:
I switched from TouchWiz to CM10...
Click to expand...
Click to collapse
???

I worded that a little weird. At first, when I started using CM10, the indicators were blue. Now, they are grey.

No 3G,or just no 3G icon?

Im in a HSPA+ area. When my 4G signal dips below 1 bar, I get a small letter "e" showing up directly above the smallest signal bar. To me,that means I'm receiving EDGE. Am i correct in this? Am i on EDGE, or is there just no 3G icon on this phone, and I'm actually on 3G?

That has got to be EDGE. I have a 3G showing on mine.
Sent from my LG-F240L using xda app-developers app

Ive looked but cannot even find where those network settings are located. Can someone direct me there so i can see if i might have something disabled.

Look at post#4 for how to get to the hidden menus
http://forum.xda-developers.com/showthread.php?t=2289547
Sent from my LG-F240L using xda app-developers app

Do i need to be rooted for this?
I went into the phone dialer and dialed it and hit send. I receive the following message, "connection problem or invalid MMI code".

HSPA+ was called 4G for some and 3.5G for other.....on the e980 there"s no "3g" icon.....in fact the HSPA+ that you refer is 4G on this phone, when you"re in a area with real 4G...then you"ll see 4G LTE icon...it was unclear at some time if lte was 4G or rather HSPA+....

andygold said:
Do i need to be rooted for this?
I went into the phone dialer and dialed it and hit send. I receive the following message, "connection problem or invalid MMI code".
Click to expand...
Click to collapse
If you have the ATT version you should tipe 980(att model) instead of 240(korean model)
Sent from my LG-F240L using xda app-developers app