Develop Bugs

Internal menu

http://wenku.baidu.com/view/e27ca2c66137ee06eff91876.html
After reading this I tried Code:
*#7092463*#
Several nice Settings, infos... and tests.
Like Touchscreentest with Coordinates, look weird Pic...
Bad. Not every Firmware support this Code.
JI5 for instance no chance... Reason I think is here:
http://forum.xda-developers.com/showthread.php?t=895526
We should more investigate this file...
I saw for S8000 they were also lucky to find new Code...
http://code.google.com/p/jetdroid/wiki/JetBootloader
I think this menu is active, only other Code needed for higher Firmware...
Best Regards

It seems not the Firmware Version is mandatory...
.. it seems this menu is locked...
I compared 2 Waves with same Firmware.
First no success. Second success... but after several Flashs I lost access to Internal menu.
Now after playing with AT commands... it is back.
It seems we can unblock... I have only no idea how exactly I've unblocked Internal menu.
Best Regards

Rsrc2_S8500(Low).rc2
Rsrc2_S8500(Mid).rc2 ----> it seems this can access Internal menu
It seems *.RC2 is the Block for Internal menu.
Compare both files, you see only 1 Byte difference.
Maybe this means something like, Low Security, Middle Security... maybe there are higher Settings possible...
I will check this.
Best Regards

how come this menu exists on wave 525 regardless of firmware?

hmm, I think I'm missing something here. In all the firmwares I've downloaded not once have I seen a Rsrc2_S8500(Mid).rc2.
Can you upload yours or otherwise let us know where we can get one from please.
Also can you tell us which firmware you're running please?
Cheers in advance,
D.

you can make yours as MID or even High with Wave remaker
http://forum.xda-developers.com/showthread.php?t=1028714
Don't forget to give a thanks to ho1od

Enter Code into handset:
Code:
[B]*#33284*#[/B]
= Debug Level (Low, Midle, High)
Best Regards

adfree said:
Enter Code into handset:
Code:
[B]*#33284*#[/B]
= Debug Level (Low, Midle, High)
Best Regards
Click to expand...
Click to collapse
Cheers Adfree - that's exactly what I was looking for ... I'm gonna try figure out decent keymaps for the android port
9600 Baud and check the setting UE Awake...
Ok...
Volume + = 0x54
Volume - = 0x55
Call = 0x50
Home = 0x53
Hangup = 0x51
Camera Halfpress = 0x8e
Camera Fullpress = 0x8d
Standby = 8f
now... how to change these into values for the s3c-keypad.kl file...

duxxyuk said:
now... how to change these into values for the s3c-keypad.kl file...
Click to expand...
Click to collapse
sorry to be off topic...
but...
the Android kernel interpets things differently, you can look at the kernel dmesg log when pressing the buttons if you want to see what is attached where, but some keys don't work from fota loader yet, people not interested in the dev side (like fixing fota or kernel issues instead of trying to install android apps) should wait for a proper release.

Not sure if before... but Backup and Restore seems possible on KK5...
Searching for folder where it is stored...
Best Regards

adfree said:
Not sure if before... but Backup and Restore seems possible on KK5...
Searching for folder where it is stored...
Best Regards
Click to expand...
Click to collapse
Thanks adfree
in before firmwares backup and restore works with kies but i dont know is it
available with phone or no .
can you please tell me how can i access to this menu ? i want to test it with other firmwares

Normally the answer is in this Thread...
Anyway.
Menu is blocked if not on Debug Level Mid or High... So first step:
*#33284*#
Later set back to Low to prevent Bluescreens.
Second step is:
*#7092463*#
Then:
4 Module Setting
11 Sync
At the moment no idea where Backupfile is stored...
In WinComm I saw this:
Code:
SmlBackupRestoreDebugHistoryResult: Cannot make config file!(/User/Mass/SmlMgr/_LastBnRHistory.txt)
I will deeper research...
Please remember. At your own risk. No idea if sideeffects...
Best Regards

any try to restoring failed
the error is : Restoring fail ( Manifest error or no Manifest ! )
---------- Post added at 12:30 PM ---------- Previous post was at 12:18 PM ----------
with stune :
User > SyncML
there is some *.cfg files
what is your idea is them backup files ?

Code:
+[059]=> [622.092]Packaging Start[/Media/_SamsungBnR_/Message.bk]
+[060]=> [622.109]Packaging Finish[/Media/_SamsungBnR_/Message.bk]:[Success]
+[061]=> [622.147]Packaging Start[/Media/_SamsungBnR_/MusicSetting.bk]
+[062]=> [622.166]Packaging Finish[/Media/_SamsungBnR_/MusicSetting.bk]:[Success]
I was able to create folder:
/User/Mass/SmlMgr/
Then file is written after Backup _LastBnRHistory.txt
Maybe I am blind, can't find yet folder /Media/_SamsungBnR_/
Maybe hidden or I am blind...
At the moment toooo lazy to backup again all files and searching for *.bk extension...
Maybe later more...
About Restore...
Success, but I have nothing installed yet and no SD card...

with stune :
User > SyncML
there is some *.cfg files
see below image :

there is some *.cfg files
Click to expand...
Click to collapse
Strange, I thought they are for FOTA...
I'll update to bada 1.0 and check again...
Maybe then more success to find *.bk files...
Best Regards

XXKL6 on my S8530 shows me Total Heap Mem.
245.760K
This seems 40 MB more then on bada 1.2...
Will check S8500...
Best Regards

adfree said:
XXKL6 on my S8530 shows me Total Heap Mem.
245.760K
This seems 40 MB more then on bada 1.2...
Will check S8500...
Best Regards
Click to expand...
Click to collapse
I can confirm this number in S8500... in XXKK7, 245.760 K... It seems that S8500 and S8530 are identical in memory issues..
Cheers!

Maybe we can find this info from S8600, S7250 and so on...
S8600 should have "more"... maybe...
Best Regards

that's right adfree, my s8600 show me more!

AT Commands + other kind of Commands

In amss.bin you can find several AT Commands...
Few short tested by me:
AT+DEVEXTMEMINSCHK?
Hmmm. returns only 2
No idea, I thought something for Memory...
AT+USERMEM
Returns 0k or maybe okay
AT+HEADERINFOSHOW?
Shows for instance the Memory name...
MemoryName:KAC007021M(S8500)
Btw... This is exact what we can read on Application Processor Chip.
1 hint that RAM is integrated with S5PC110 Processor...
Best Regards
TRY at your own risk. I have no idea what could happen.

s8500 support several types of at commands.
First type is common at commands set (70 commands), including AT+CPIN, AT+CMGR etc
the second (samsung specific, 171 commands) has many useful commands like etc
s8500 support 293 at commands (including common commands like AT+CPIN, AT+CMGR, and samsung specific like AT+IMEITEST, AT+CPU also)
complete list in attachment.
Do not use if you do not know what the command is for

AT+PRODUCTCODE?
Result:
AT+PRODUCTCODE? +PRODUCTCODE: GT-S8500BAADBT
If I enter:
AT+PRODCODE
Result:
Invalid Parameter
Hmmm. I'm not up to date in using AT commands.
Is it maybe possible to change Product Code via AT Command?
How is the correct Syntax for AT+PRODCODE ?
There are more interesting Commands.
Best Regards
P.S.:
I was only in Kies Mode, maybe other results in Debug Mode possible...

AT+DEVCONINFO
MN(GT-S8500);BASE(GT-S8500);VER(S8500XXKK7/S8500OXAKK7);HIDVER(S8500XXKK7/S8500OXAKK7);PRD(GT-S8500BAADBT);SN();IMEI(3xxxxxx3);PN();TZVER(20111025);CON(AT,MTP);HVID(Osp:2097153,IntSys:2097154);LOCK(NONE);LIMIT(FALSE)
Oh, not realized before... few changes...
On previous bada 1.x... looks like this:
MN(GT-S8530);VER(S8530XXJL2/S8530OXFJK3);HIDVER(S8530XXJL2/S8530OXFJK3);PRD(GT-S8530BAASEB)
MN should be manufacturer I think... this is very funny text string.
Best Regards
Edit 1.
My fault... MN is Model Name...

Ooh, this reminds me of the days when I had a SonyEricsson T68 and K750.... Good ol days ... One thing missing from those days .. Our samsung wave telephones don't do the Bluetooth HID protocol...

How do you send these commands?
Can you post output from:
AT+DGLOCK
AT+LVOFLOCK
AT+DETALOCK
?

How do you send these commands?
Click to expand...
Click to collapse
You can choose... there are hundrets of Tools, or write your own Terminal...
Few Tools I've used for this...
Revskills very often...
WinComm
QuB...
.
.
AT+DGLOCK
AT+LVOFLOCK
AT+DETALOCK
Click to expand...
Click to collapse
I'm little wimpy old man as you know...
But as I have 0 info about this... I'm scared to lock something and brick my handset...
No idea how to unlock ...
I'll investigate more...
Google research etc. and report later more... I'll try to be on the safer site...
About DELTA files/FOTA...
http://www.megaupload.com/?d=Z53R1IVX
I have upload few of S8500.
Maybe we find Commands or way to install manually these *.cfg Deltas...
Maybe AT Command also work...
Best Regards
Edit 1.:
Found this... untested yet:
Code:
AT+FOTALOC
AT+FOTAREADY
AT+FOTASTART
Edit 2...
Or maybe more such DEV Commands...
GetFotaEngineVer
Get FOTA Engine Version
Edit 3...
Maybe for Update... beter search for something like this:
SML_DM_FUMO_STATE
Or SCOMO
SCOMO Download Complete go to ui event 1...
SCOMO...Warning!!!! Delta Over Size
DownloadAndUpdate...org.openmobilealliance.dm.firmwareupdate.devicerequest
http://www.openmobilealliance.org/t...ram/docs/ets/oma-ets-fumo-v1_0-20061215-c.pdf

I'm sure LVOFLOCK gets level of lock - doesn't overwrite anything
The same about DETALOCK (detailed lock)
Just don't remember what was the code for DGLOCK, so don't use it for now if u're scared. You won't find these in google I think, these are Samsung specific, maybe only Mocha specific.
//edit:
Btw, many of AT commands goes to AMSS, but only what AMSS do is calling Mocha function in AP corresponding to AT command and returning result. For eg LVOFLOCK make AMSS invoke Bada function (also accessible from QuB) GetLevelOfLock and get it's return value. Can you compare result of these 2 maybe?

http://electronix.ru/forum/index.php?act=attach&type=post&id=46875

Tested by me...
AT+FOTALOC?
: Others
This seems location... folder... Others
AT+FOTAREADY?
COPYRETRY
But AT+FOTASTART seems correct...
Handset reboots... like if I delete *.cfg files...
Hmmmmmmmmm.
Will log with WinComm... maybe then more info...
Best Regards

At+preconfig=2,tmb
at+lvoflock=1,0
at+factrst=0,1
at+lvoflock=0,0
600 pages FOTA OTA Command with explain :
http://www.scribd.com/doc/63560940/47/FOTA-Commands
http://www.google.fr/url?sa=t&rct=j...sg=AFQjCNFTQzBSwRrZg82TEZSOleqClg4dbA&cad=rja

AT+FOTASTART 2400258.cfg
Error...
AT+FOTASTART after Download of package, not start downloaded update.
Maybe wrong syntax or FOTA of Qualcomm part only... amss.bin...
I can't see anything with WinComm... maybe next try with QXDM... if amss related...
@ Tigrouzen
Many thanx for helpfull Links.
Best Regards

adfree said:
AT+FOTASTART 2400258.cfg
Error...
AT+FOTASTART after Download of package, not start downloaded update.
Maybe wrong syntax or FOTA of Qualcomm part only... amss.bin...
I can't see anything with WinComm... maybe next try with QXDM... if amss related...
@ Tigrouzen
Many thanx for helpfull Links.
Best Regards
Click to expand...
Click to collapse
But i remember some time Samsung change this thing like not AT+FOTAUIMODE but
AT&FOTAUIMODE
Now its work but no Carrier
In our wave AT+CPIN doesnt work but AT&CPIN works

Code:
AT+FOTALOC?
AT+FOTAREADY?
AT+FOTASTART
Short tried on bada 1.0... JE7 Firmware...
All 3 output was Error...
Okay, not included in amss...
2400258.cfg also as text String in apps_compressed...
Will play little bit with Delta... then move to XXJL2...
Best Regards

Little progress...
AT+DEVCONINFO
Code:
MN(GT-S8600);VER(S8600XXKJC/S8600DBTKJ4);HIDVER(S8600XXKJC/S8600DBTKJ4)...
My S8500...
Best Regards

Did you get S8600 fw on your S8500 !!!!
Man this JTAG playing could kill your phone
Best Regards

Nah, he got FW ID from S8600 on S8500, while S8600 ShpApp & RC may be possible to run on S8500 and vice versa, rather no way about other things. ;P

"DEVCONINFO"="MN(GT-S8600);BASE(GT-S7250);VER(S8600XXKK5/S8600DBTKL1);HIDVER(S8600XXKK5/S8600DBTKL1);PRD(GT-S8600HKADBT)
Click to expand...
Click to collapse
Many thanx to S8600 user for nice info.
Best Regards

AT+SECUKEY +SECUKEY:"DXDxxxxxxxxxxxx=="
OK
AT+AUTHKEY +AUTHKEY:FAIL
OK
AT+DEVAUTH +DEVAUTH:SUCCESS
OK
AT+CERTKEY +CERTKEY:"X5Mxxxxxxxxxxx=="
OK
AT+PASSWORDINPUT +PASSWORDINPUT:SUCCESS
OK
Found Commands in WsSyncml.so, see here:
http://forum.xda-developers.com/showpost.php?p=21541765&postcount=4
No idea yet, what it is.
Best Regards

b.kubica said:
complete list in attachment.
Click to expand...
Click to collapse
Nice post b.kubica
Are you aware of the Qualcomm commands?
AT+CLAC lists these extra commands:
$QCSIMSTAT
$QCCNMI
$QCCLR
$QCDMG - Diagnostic Mode initiation.
$QCDMR - Diagnostic Mode (Baud) Rate. at$qcdmr=? shows available baud rates, at$qcdmr? shows current baud rate
$QCDNSP
$QCDNSS
$QCTER
$QCSLOT
$QCPINSTAT
$QCPDPP - Packet Data Protocol authentication Parameters - see w w w . shapeshifter . se/2008/04/30/list-of-at-commands/
$QCPDPLT
$QCPWRDN
$QCDGEN
$BREW
$QCSYSMODE
$QCCTM
$SUSBC
$NWMDCHNG
$SHPSLEEP
Not sure what they do. All I've found so far is at$qcsysmode restarts the phone with what looks like a file list coming out on the serial port. BREW is the Qualcomm application language.
Does AT_OWANCALL exist in the ROM? That is sometimes used to set up UMTS/HSDPA connections.

MobileCodes for s8600

Hi all, the most of the known Bada 2.0 Mobile Codes are invalid on 8600
If anyone knows some for S8600, pls post.
It could be helpful for owners of this device.
Thanks

*#197328640# should run
*#7092463*# seems to run without higher Debug Level then Low
Otherwise *#33284*# for Debug Level change...
More for advanced users, but same like S8500/S8530 use. So take an look here first:
http://forum.xda-developers.com/showthread.php?t=1154945
Best Regards

adfree said:
*#197328640# should run Does not work
*#7092463*# seems to run without higher Debug Level then Low
Click to expand...
Click to collapse
Did not try the others when I try the Wave III.

*#197328640# should run Does not work
Click to expand...
Click to collapse
Please see here:
http://forum.xda-developers.com/showpost.php?p=19687534&postcount=22
Okidoki...
Mabye we should write which Firmware Version we have tried...
Maybe there are big difference between prototype Firmware... and now Retail...
Thanx in advance.
Maybe also usefull, write Code which not work on your S8600... So other S8600 user can confirm or not...
Maybe again protected by Debug Level... like Internal Menu... *#709blabla...
Best Regards

This Codes are working:
*#0228#- Battery test
*#272*time* - csc pre configuration
example *#272*1423* ( if the time is 14:23)
*#0*# - LCD test
*#526# - Wi-Fi Manual MFG Test Mode
*#1234# - SW Version and CSC Version
*#7465625#- This code can be used to check the status of SIM lock, Network LOCK,etc.

[Q] How to use wincomm?

Hi everyone (and especially adfree that is Wincomm lover!!)
I've seen this topic before but i couln't understand how to work with wincomm
http://forum.xda-developers.com/showthread.php?t=928170
It would be great if someone writes a short help for using wincomm on wave devices
by the way in that topic you were talking about SW.ppt, please give download link
Thanks in advance

Here I have tried to Link all documents...
http://forum.xda-developers.com/showthread.php?t=901416
This should lead to this:
http://www.cpkb.org/wiki/Samsung_GT-S8500_Wave_service_manual
Download please:
All in one package
Samsung GT-S8500 GT-S8500L Wave complete Service Manual (73.30 MB):
Click to expand...
Click to collapse
Best Regards

All I'm getting in wincomm after connecting wave Y is modem query only.
What are the other commands for it ?

Hello.
Code maybe helps:
*#197328640#
Search for entries with WinComm...
I will add Screenshots... later...
Best Regards
Edit 1.
Minimum settings...
USB Debugging...
So you have chance to see sometihnig if App is started...
Or for whole Log of all handest stuff... enable Debug Mode Middle or High:
*#33284*#

Samsung wave 3 ANDROID?[Q]

Heii all...in finally exist android for s8600?

J3lackHeart said:
Heii all...in finally exist android for s8600?
Click to expand...
Click to collapse
You can see everything about this here
A short recap : adfree works more or less alone and managed to get android to boot on wave 3.
But you need jtag and it's not functionnal : no touchscreen, no network, probably no battery reading, sound, etc...

http://forum.xda-developers.com/showthread.php?t=2116846
Android on S8600... yes... for testing/developing...
Fully functional like S8500/S8530... NO
"Installing" Android on S8600 is possible WITHOUT JTAG... with QPST + USB cable + brain...
JTAG is better/safer to have... as many Bugs + not working + not supported
If something kills Bootloader or Boot progress... you need mandatory JTAG to recover/repair... otherwise no Key combination, no Download Mode JIG no Software help anymore...
S8600 is cheap old device...
Halfdamaged S8600 are cheaper...
So less then 50 $ or Euro... not much money for try...
Best Regards