Develop Bugs

Internal menu

http://wenku.baidu.com/view/e27ca2c66137ee06eff91876.html
After reading this I tried Code:
*#7092463*#
Several nice Settings, infos... and tests.
Like Touchscreentest with Coordinates, look weird Pic...
Bad. Not every Firmware support this Code.
JI5 for instance no chance... Reason I think is here:
http://forum.xda-developers.com/showthread.php?t=895526
We should more investigate this file...
I saw for S8000 they were also lucky to find new Code...
http://code.google.com/p/jetdroid/wiki/JetBootloader
I think this menu is active, only other Code needed for higher Firmware...
Best Regards

It seems not the Firmware Version is mandatory...
.. it seems this menu is locked...
I compared 2 Waves with same Firmware.
First no success. Second success... but after several Flashs I lost access to Internal menu.
Now after playing with AT commands... it is back.
It seems we can unblock... I have only no idea how exactly I've unblocked Internal menu.
Best Regards

Rsrc2_S8500(Low).rc2
Rsrc2_S8500(Mid).rc2 ----> it seems this can access Internal menu
It seems *.RC2 is the Block for Internal menu.
Compare both files, you see only 1 Byte difference.
Maybe this means something like, Low Security, Middle Security... maybe there are higher Settings possible...
I will check this.
Best Regards

how come this menu exists on wave 525 regardless of firmware?

hmm, I think I'm missing something here. In all the firmwares I've downloaded not once have I seen a Rsrc2_S8500(Mid).rc2.
Can you upload yours or otherwise let us know where we can get one from please.
Also can you tell us which firmware you're running please?
Cheers in advance,
D.

you can make yours as MID or even High with Wave remaker
http://forum.xda-developers.com/showthread.php?t=1028714
Don't forget to give a thanks to ho1od

Enter Code into handset:
Code:
[B]*#33284*#[/B]
= Debug Level (Low, Midle, High)
Best Regards

adfree said:
Enter Code into handset:
Code:
[B]*#33284*#[/B]
= Debug Level (Low, Midle, High)
Best Regards
Click to expand...
Click to collapse
Cheers Adfree - that's exactly what I was looking for ... I'm gonna try figure out decent keymaps for the android port
9600 Baud and check the setting UE Awake...
Ok...
Volume + = 0x54
Volume - = 0x55
Call = 0x50
Home = 0x53
Hangup = 0x51
Camera Halfpress = 0x8e
Camera Fullpress = 0x8d
Standby = 8f
now... how to change these into values for the s3c-keypad.kl file...

duxxyuk said:
now... how to change these into values for the s3c-keypad.kl file...
Click to expand...
Click to collapse
sorry to be off topic...
but...
the Android kernel interpets things differently, you can look at the kernel dmesg log when pressing the buttons if you want to see what is attached where, but some keys don't work from fota loader yet, people not interested in the dev side (like fixing fota or kernel issues instead of trying to install android apps) should wait for a proper release.

Not sure if before... but Backup and Restore seems possible on KK5...
Searching for folder where it is stored...
Best Regards

adfree said:
Not sure if before... but Backup and Restore seems possible on KK5...
Searching for folder where it is stored...
Best Regards
Click to expand...
Click to collapse
Thanks adfree
in before firmwares backup and restore works with kies but i dont know is it
available with phone or no .
can you please tell me how can i access to this menu ? i want to test it with other firmwares

Normally the answer is in this Thread...
Anyway.
Menu is blocked if not on Debug Level Mid or High... So first step:
*#33284*#
Later set back to Low to prevent Bluescreens.
Second step is:
*#7092463*#
Then:
4 Module Setting
11 Sync
At the moment no idea where Backupfile is stored...
In WinComm I saw this:
Code:
SmlBackupRestoreDebugHistoryResult: Cannot make config file!(/User/Mass/SmlMgr/_LastBnRHistory.txt)
I will deeper research...
Please remember. At your own risk. No idea if sideeffects...
Best Regards

any try to restoring failed
the error is : Restoring fail ( Manifest error or no Manifest ! )
---------- Post added at 12:30 PM ---------- Previous post was at 12:18 PM ----------
with stune :
User > SyncML
there is some *.cfg files
what is your idea is them backup files ?

Code:
+[059]=> [622.092]Packaging Start[/Media/_SamsungBnR_/Message.bk]
+[060]=> [622.109]Packaging Finish[/Media/_SamsungBnR_/Message.bk]:[Success]
+[061]=> [622.147]Packaging Start[/Media/_SamsungBnR_/MusicSetting.bk]
+[062]=> [622.166]Packaging Finish[/Media/_SamsungBnR_/MusicSetting.bk]:[Success]
I was able to create folder:
/User/Mass/SmlMgr/
Then file is written after Backup _LastBnRHistory.txt
Maybe I am blind, can't find yet folder /Media/_SamsungBnR_/
Maybe hidden or I am blind...
At the moment toooo lazy to backup again all files and searching for *.bk extension...
Maybe later more...
About Restore...
Success, but I have nothing installed yet and no SD card...

with stune :
User > SyncML
there is some *.cfg files
see below image :

there is some *.cfg files
Click to expand...
Click to collapse
Strange, I thought they are for FOTA...
I'll update to bada 1.0 and check again...
Maybe then more success to find *.bk files...
Best Regards

XXKL6 on my S8530 shows me Total Heap Mem.
245.760K
This seems 40 MB more then on bada 1.2...
Will check S8500...
Best Regards

adfree said:
XXKL6 on my S8530 shows me Total Heap Mem.
245.760K
This seems 40 MB more then on bada 1.2...
Will check S8500...
Best Regards
Click to expand...
Click to collapse
I can confirm this number in S8500... in XXKK7, 245.760 K... It seems that S8500 and S8530 are identical in memory issues..
Cheers!

Maybe we can find this info from S8600, S7250 and so on...
S8600 should have "more"... maybe...
Best Regards

that's right adfree, my s8600 show me more!

Since XXKK5 Update over the Air aka FOTA for S8500/S8530 AND S8600

S8500XXKK5 is able to update Firmware over the Air... See here:
http://forum.xda-developers.com/showpost.php?p=19663390&postcount=17
This is DELTA files stuff... Header:
BPDZ
Seen in several Firmware packages...
Main file is in:
User\Mass\SyncML\Fota\*.cfg
5 MB
Additional files are in
User\SyncML\*.cfg
You can choose later with Reminder to Backup files.
Handset creates now NEW files like apps_compressed.bin.
Around 5 Minutes... See Video:
http://www.youtube.com/watch?v=jhKquCccyD8&feature=player_embedded
Now I have dump via JTAG KKV...
I will upload soon apps_compressed.bin for study...
Best Regards
Edit 1.
CONFIRMED devices:
Code:
S8500 DBT
S8530 XEF
S8600 XEF

KKV is FOTA Demo... internal test maybe...
In apps_compressed only 1 Byte change...
http://www.megaupload.com/?d=6UKRP1YY
Attention! This is not for Multiloader, as it is decrypted allready...
Taken from JTAG dump...
Decompress possible with TriX for instance.
RC1 seems also changed...
Will check also QMD part of CSC...
Visible is Samsung Logo from RC2... it is reverse during Boot.
Best Regards

In CSC QMD part...
14 times Flight Mode into FLIGHT MODE...
RC1... not exactly sure about changes...
Both files included... maybe RC1 dump not exact cutted at end...
http://www.megaupload.com/?d=Q1L5P3BV
If Bootloader is also affected, I'll test sooooon.
Again, NOT for Multiloader, only for Research.
Best Regards
P.S.:
Yes, it is possible to make valid file for Multiloader... but...

Major changes in Boot... dbl not checked... toooo lazy now...
I have removed the 128 KB from JTAG dump for better comparing.
NOT use in Multiloader!!!
You can brick your handset.
So I think this is evidence once more, that FOTA is very powerfull...
Best Regards

Thank you Adfree for your hardwork
I think it is time for someone to continue this from that point
Of course if you can do more you are more than welcome
So compression Algorithm is in the phone FW now somewhere .....
Apps_compressed.bin or FOTA ?!!!!
this Algorithm is wanted dead or alive
Best Regards

adfree said:
Major changes in Boot... dbl not checked... toooo lazy now...
I have removed the 128 KB from JTAG dump for better comparing.
NOT use in Multiloader!!!
You can brick your handset.
So I think this is evidence once more, that FOTA is very powerfull...
Best Regards
Click to expand...
Click to collapse
Nice news there's differente boot and ive found source il be post later
They use Nucleus for crypto source, embeddedXen 3.1.3 its an virtual machine
https://rapidshare.com/files/239917171/crypto.7z
All file on your boot file adfree is in. There's complete kernel source i can upload of course now i upload just partial source. The's is 2002 revision 1.3 but i see 3.1.3 exist and some compile it need search more
Last version its 4 you can find source her :
http://embeddedxen.git.sourceforge....9c15b5bd0ccc08732577063836662835c3dc5;hb=HEAD
but our version of boot its compiled with 3.1.3 version

Tigrouzen said:
Nice news there's differente boot and ive found source il be post later
They use Nucleus for crypto source, embeddedXen 3.1.3 its an virtual machine
https://rapidshare.com/files/239917171/crypto.7z
All file on your boot file adfree is in. There's complete kernel source i can upload of course now i upload just partial source. The's is 2002 revision 1.3 but i see 3.1.3 exist and some compile it need search more
Last version its 4 you can find source her :
http://embeddedxen.git.sourceforge....9c15b5bd0ccc08732577063836662835c3dc5;hb=HEAD
but our version of boot its compiled with 3.1.3 version
Click to expand...
Click to collapse
so are u saying source code or something like on android

prok**** said:
so are u saying source code or something like on android
Click to expand...
Click to collapse
non this some source code about crypto on boot in virtual machine

Tigrouzen said:
non this some source code about crypto on boot in virtual machine
Click to expand...
Click to collapse
... tell me what all we can do by this new discovery ..

prok**** said:
... tell me what all we can do by this new discovery ..
Click to expand...
Click to collapse
Ho1od or Rebellios can take a look at and maybe find some trick its not for us but for training also for decrypting some boot system, all its important

On KK5 S8530 I was not able to download something...
DMSetup.ini
Code:
#Settings
FirmwareMaxSize=98304
I think this means maximum 98 MB for Delta... in KK5.
From bada 1.0 JE7...
Code:
FirmwareMaxSize=10485760
Btw...
In Internal Menu you can access few Settings...
http://forum.xda-developers.com/showthread.php?t=906966
Best Regards

Code:
HttpReqInternal: Proxy address is 0, so conver to NULL
HttpReqInternal : HTTP[ 0 ] - https://www.ospserver.net/device/fumo/agreement/IMEI:[B][COLOR="Red"]YOURS ! Caution[/COLOR][/B] (smlCommonHttp.c : 373)
With WinComm you can log few things...
http://forum.xda-developers.com/showthread.php?t=928170
For connection to Server your IMEI is sent...
Best Regards

those who pass me the update that does not come out more 'on Fota?
thanks

It seems nearly all files affected by this "update" to KKV...
amss.bin also few Bytes in Name changed...
Code:
Q6270B-KPUBL-9.9.99999
dbl.mbn seems only untouched file.
Except that FFS, CSC, APP is nearly impossible to compare...
Maybe in 1 of cfg are details about changes... and files involved....
@ DevilM
Not exact understand... sorry. BUT...
"We" not sure how and who is able to Download KKV...
Maybe you need luck, or maybe access limitation by:
- time... maybe only from 5 - 7 morning
- maybe only 100 "user" can access at same time Server...
I don't know. Sorry.
Best Regards

FirmwareMaxSize=98304
It's probably max 96KB for delta file.
FirmwareMaxSize=10485760
is 10MB
I found Quram compression routine in XPKJ1 FOTA module. But it's partial and very, very huge. Probably does support only one type of compression, likely for Rsrc or some libraries. Do you think it's possible for you to dump S8500XXKKV delta and send to me?
Probably FOTA updates does support following commands:
ROM:473277CC DCD aDelta_op_image_updat ; "DELTA_OP_IMAGE_UPDATE"
ROM:473277D0 DCD aDelta_op_image_upd_0 ; "DELTA_OP_IMAGE_UPDATE_COMP"
ROM:473277D4 DCD aDelta_op_image_upd_1 ; "DELTA_OP_IMAGE_UPDATE_ENGINE"
ROM:473277D8 DCD aDelta_op_file_create ; "DELTA_OP_FILE_CREATE"
ROM:473277DC DCD aDelta_op_file_overwr ; "DELTA_OP_FILE_OVERWRITE"
ROM:473277E0 DCD aDelta_op_file_modify ; "DELTA_OP_FILE_MODIFY"
ROM:473277E4 DCD aDelta_op_file_remove ; "DELTA_OP_FILE_REMOVE"
ROM:473277E8 DCD aDelta_op_symlink_cre ; "DELTA_OP_SYMLINK_CREATE"
ROM:473277EC DCD aDelta_op_symlink_ove ; "DELTA_OP_SYMLINK_OVERWRITE"
ROM:473277F0 DCD aDelta_op_symlink_mod ; "DELTA_OP_SYMLINK_MODIFY"
ROM:473277F4 DCD aDelta_op_symlink_rem ; "DELTA_OP_SYMLINK_REMOVE"
ROM:473277F8 DCD aDelta_op_dir_create ; "DELTA_OP_DIR_CREATE"
ROM:473277FC DCD aDelta_op_dir_remove ; "DELTA_OP_DIR_REMOVE"
Click to expand...
Click to collapse
guess it's enumerated from OP_IMAGE_UPDATE = 0
IMAGE_UPDATE_COMP = 1
and so on.
Also a question, have you ever met "GCE" or "GLS" magic string in some files related to compression? Looks like compression method or what.
//edit:
Some about FOTA origin probably:
http://www.ospserver.net/terms/terms.html
That server is probably defined somewhere in SystemFS.

Oh, found this in Debug folder... Logfile
Code:
FOTAMGR > QuramMduceBEraseBlock: startBlk(1), blk_num(1), idx(0), physical addr(0x01140000), size(0x00040000)
FOTAMGR > QuramMduceBWriteData: addr(0x00040000), size(0x00004000), idx(0), physical addr(0x01140000)
FOTAMGR > QuramMduceBWriteData: addr(0x00044000), size(0x0003c000), idx(0), physical addr(0x01144000)
Do you think it's possible for you to dump S8500XXKKV delta and send to me?
Click to expand...
Click to collapse
I'll sleep about.... tooo paranoid...
Only 3 user have KKV update... 2 in Germany...
IP + IMEI + I don't know what else is stored in these files...
Ah, forgotten my phonenumber...
Best Regards

From KK5 its possible to update to KK6...
And KK7 also updateable... to KKV...
XXKK5
Code:
Type : Unofficial Version
Number : 1127
Builder : superuser
Host : S1-AGENT08
Date : 2011/11/[B]22[/B]
Time : 21:04:33
Size : 42730876 bytes
CheckSum : 0xf4ff0762
XXKK6
Code:
Type : Unofficial Version
Number : 1155
Builder : superuser
Host : S1-AGENT08
Date : 2011/11/[B]25[/B]
Time : 22:35:35
Size : 42730876 bytes
CheckSum : 0xf4f72020
It seems you need exact procedure and/or its only 1 time possible after complete Flash with Multiloader... then you can download FOTA...
My steps:
1.
Firmwareupdate via Multiloader!
2.
During first initial Steps... Choose ENGLISH as language
3.
Timezone seems irrelevant... I choose Bermuda...
4.
Ok... Ok...
Now you are able to navigate in menu...
5.
WLAN/Wi-Fi ... no need of active SIM... enter your Password to establish connection to Wi-Fi
6.
Go to Settings->Accounts
Config your Samsung Account
Now you could test if ... but I think no connection... only
You need to RESTART your handset... OFF... ON
After finish of Boot, maybe wait short... then:
Settings->General->Software update
Don't forget to choose Wi-Fi
Please. I need someone to compare files.
Please after Download choose LATER... to backup folder:
Code:
User\Mass\SyncML\Fota\*.cfg
5 MB +
Additional files are in
User\SyncML\*.cfg
NOT upload public, please contact me in private via PM.
Thanx in advance.
Best Regards

After my KK5 Multiloader update... now received 3 packages...
KK5->KK6->KK7->KKV
Last one not installed yet... maybe I'll wait little bit to get KK8 or something like this.
Hmmm. Not sure how final FOTA will work... but it seems you can only jump in minor steps...
As fantasy example:
If your device has "KK1" and latest Firmware is KK9... then maybe you have to download and install first:
KK2
KK3
.
.KK8
Each package a 5 MB...
Best Regards

OTA updates are available for Germany,Italy,UK and another 2 countries i forgot only.....also OTA install of the apps
so i got 0 chance to get such updates
Best Regards

so i got 0 chance to get such updates
Click to expand...
Click to collapse
Not tested yet... if SIM card is mandatory in device... (maybe I'll remove it for test)
BUT my SIM card is not more active... all actions over Wi-Fi...
Also not many users from Europe (or Germany) reports success...
I can only count 3 user from Germany... 1 from Romania...
We will see...
I hope more user can confirm working FOTA.
Thanx.
Best Regards

[Q] How to use wincomm?

Hi everyone (and especially adfree that is Wincomm lover!!)
I've seen this topic before but i couln't understand how to work with wincomm
http://forum.xda-developers.com/showthread.php?t=928170
It would be great if someone writes a short help for using wincomm on wave devices
by the way in that topic you were talking about SW.ppt, please give download link
Thanks in advance

Here I have tried to Link all documents...
http://forum.xda-developers.com/showthread.php?t=901416
This should lead to this:
http://www.cpkb.org/wiki/Samsung_GT-S8500_Wave_service_manual
Download please:
All in one package
Samsung GT-S8500 GT-S8500L Wave complete Service Manual (73.30 MB):
Click to expand...
Click to collapse
Best Regards

All I'm getting in wincomm after connecting wave Y is modem query only.
What are the other commands for it ?

Hello.
Code maybe helps:
*#197328640#
Search for entries with WinComm...
I will add Screenshots... later...
Best Regards
Edit 1.
Minimum settings...
USB Debugging...
So you have chance to see sometihnig if App is started...
Or for whole Log of all handest stuff... enable Debug Mode Middle or High:
*#33284*#

Customize your firmware

For Bada 2.0
To enable (or disable) some fonction directly from firmware.
Extract CSC with tool (WaveRemaker), go to CSC\SystemFS\Settings\PreConfiguration\Default\NV
Open nv_original.ini
To change browser's user agent add this command: NV_SI_UAGENT=the user agent you want to use
Exemple:
NV_SI_UAGENT=Mozilla/5.0 (Linux; U; Android 4.0.3; fr-fr; GT-I9000 Build/IML74K) AppleWebKit/535.7 (KHTML, like Gecko) CrMo/16.0.912.75 Mobile Safari/535.7
You also can active others, like:
- Battery percentage => NV_SI_BATTERY_PERCENTAGE_ENABLE =1
- Disable Mode vibrate => NV_SI_MODE_VIBRATE=0
etc.
The file after looks like that
#Version
Version=1
#NvId
NV_SI_ADM_PRE_CONFIGURATION=0
NV_SI_MODE_VIBRATE=0
NV_SI_BATTERY_PERCENTAGE_ENABLE =1
NV_SI_UAGENT=Mozilla/5.0 (Linux; U; Android 4.0.3; fr-fr; GT-I9000 Build/IML74K) AppleWebKit/535.7 (KHTML, like Gecko) CrMo/16.0.912.75 Mobile Safari/535.7
Click to expand...
Click to collapse
After modifying, rebuild the CSC and flash your wave.
There are a lot of other things, to see all actions, plug your wave to computor, run Stune and open Settings/Default/NV/nv_default.ini
If you find interresting things, thanks for making your feedback

What works?
- NV_SI_MODE_VIBRATE=0
Vibrate is disabled
- NV_SI_BATTERY_PERCENTAGE_ENABLE =1
Battery % is enabled
- NV_SI_PHONE_SLEEP=600
Backlight time (15s, 30s by default, 60s, 180s, 600s)
- NV_SI_UAGENT=
Browser user agent you want
- NV_SI_NETWORK_DATA_ROAMING=1
Roaming is enabled
- NV_SI_USE_PACKET_DATA_ENABLE=1
Packet data is enabled
- NV_SI_MOTION_SHAKE=0
- NV_SI_MOTION_TILT=0
-NV_SI_MOTION_TURN_OVER=0
- NV_SI_MOTION_SHAKE=0
Motions are disabled because I never use them lol
- NV_SI_LCD_CONTRAST=13
To adjust brightness, 15 by default (set 5 on wave). If you want 3, put 13, etc
Some other interesting do not work (Fake call, light sensor, Wifidirect, etc)
Is there a list of all NV_SI available??

NV_SI
Here's a complete list of NV_SI items.

"After modifying, rebuild the CSC and flash your wave."
Is the 'rebuild' just saving the file as uncompressed CSC?
Can I then choose the new CSC file when flashing or is there something else I need to do before flashing?
Thanks!

http://forum.xda-developers.com/showpost.php?p=22256801&postcount=231
Maybe Font path... for easier Fontchange...
Code:
NV_SI_FONT_TYPE_DEFAULT_FILE=/SystemCSC/Font/Samsung font.ttf
NV_SI_FONT_TYPE_FILE=/SystemCSC/Font/Samsung font.ttf
Maybe Product Code change...
Not tried yet.
But I think their are few more usefull settings possible.
As some differences in bada 2.0 Firmware... since bada 1.x...
Best Regards

I wonder if it is possible to update this thing without losing any data
I already tried with Stune with no success
Can anyone post possible paths of such a file ?
Maybe i missed one of those
Thanks in Advance
Best Regards
Edit : I see these files only
/Settings/Default/NV/nv_default.ini
/SystemFS/Settings/PreConfiguration/Default/NV/nv_original.ini
/NV/nv_default.ini
I remember a table of NV items with addresses posted on another thread i'll look into it
Edit 2 : NV items table posted by Rebellos
Here : http://forum.xda-developers.com/showpost.php?p=21377672&postcount=10
And Here : http://forum.xda-developers.com/showpost.php?p=19746682&postcount=28
Edit 3 : NV items addresses in hex-decimal format are attached for faster investigation

NV/nv_default.ini
This is hidden folder...
NV means NV items. You can also reach them, if you know ID via Qualcomm Tools.
But this config list seems easier.
Yes, in theory maybe with Multiloader it could be to flash only such text file to change NV item.
But no idea how...
I'm new to Samsung.
Only 1 year experience.
Maybe someone else has experience with Qualcomm models from Samsung and know how to change NV items in other way, without dataloss and without Qualcomm Tools...
Best Regards
Edit 1.
No idea if possible to change this file... with effect and no dataloss... never tried
NV/nv_default.ini
---------- Post added at 09:48 AM ---------- Previous post was at 09:11 AM ----------
NV_SI_OPERATOR_SALES_CODE=KOR
I am not sure as I have very often flashed then used Preconfig...
Sometimes it seems. Product Code is changed from Firmware Flashing...
Maybe it is possible to use Multiloader in this case, to change Product Code...
Need to be confirmed.
Best Regards

congratulations very good idea.
http://forum.xda-developers.com/showthread.php?t=1505302:D

adfree said:
http://forum.xda-developers.com/showpost.php?p=22256801&postcount=231
Maybe Font path... for easier Fontchange...
Code:
NV_SI_FONT_TYPE_DEFAULT_FILE=/SystemCSC/Font/Samsung font.ttf
NV_SI_FONT_TYPE_FILE=/SystemCSC/Font/Samsung font.ttf
Maybe Product Code change...
Not tried yet.
But I think their are few more usefull settings possible.
As some differences in bada 2.0 Firmware... since bada 1.x...
Best Regards
Click to expand...
Click to collapse
It is working, I changed to choco cokie font
Interesting: NV_SI_ANYKEY_LCD_ON=1 it works!!!
Themes not work, is changed on adjust, but no apply...
NV_SI_THEME_DEFAULT_FILE=/AppEx/Sys/Theme/Default theme.smt
NV_SI_THEME_USE_FILE=/AppEx/Sys/Theme/Default theme.smt
regards
aluke

NV_SI_LIGHT_SENSOR_ACTIVE=0
Click to expand...
Click to collapse
Is there a light sensor !
NV_SI_DATE_START_YEAR=2011
Click to expand...
Click to collapse
Nice when the phone ask for the date
NV_SI_DEVICE_NAME=Samsung Wave
Click to expand...
Click to collapse
Useful for Bluetooth , Modem & DLNA names
NV_SI_FAKE_CALL_VOICE=0
NV_SI_FAKE_CALL_TIMER=10
NV_SI_FAKE_CALL=0
Click to expand...
Click to collapse
Maybe possible to revive this option ?!
Sorry No time to test today
Best Regards

mylove90 said:
Is there a light sensor !
Click to expand...
Click to collapse
of course.. the s8600 got one

NV_SI_KJAVA_RUNNING_MIDLET_COUNT=5
NV_SI_JAVA_DEFAULT_MIDLET_COUNT=5
5 JAVA program running at the same time
full flash
translation by Google

If I set "NV_SI_PHONE_SLEEP=8" would it work?

josephpatrick said:
If I set "NV_SI_PHONE_SLEEP=8" would it work?
Click to expand...
Click to collapse
Yes, normally it should work since it is you who makes the restrictions.

Soxix said:
Yes, normally it should work since it is you who makes the restrictions.
Click to expand...
Click to collapse
It works but I need to figure out a way to list 8 secs in the menu as well because in case I switch to 15secs I do not have the option to switch back to 8secs. Any thoughts?

josephpatrick said:
It works but I need to figure out a way to list 8 secs in the menu as well because in case I switch to 15secs I do not have the option to switch back to 8secs. Any thoughts?
Click to expand...
Click to collapse
Just don't change of settings
Or you will have to add a setting to the concerned file of the settings menu.
And I have no idea how to do this. I even wonder whether it is possible...

How to delete operator name on notification bar?

Very good.
Thanx lasentenza
I will now use these:
Code:
NV_SI_BATTERY_PERCENTAGE_ENABLE =1
NV_SI_PHONE_SLEEP=600
NV_SI_MODE_VIBRATE=0
Maybe someone found more usefull settings?
And maybe someone know how to flash this with Multiloader?
I mean only the NV items ?
Maybe as ETC in Multiloader?
nv_original.ini
Best Regards

NV items edit with a flash to overwrite old files doesn't change NV items for real
It just replace the files with newer ones
Sorry you have to do a full flash with newer CSC file to get it working
Best Regards

Found on S8530NELH2 but why 1.0 and GT-S8500
NV_SI_UAGENT=SAMSUNG-GT-S8500/1.0 Bada/1.0 Dolfin/2.0 NexPlayer/3.0 SMM-MMS/1.2.0 profile/MIDP-2.1 configuration/CLDC-1.1 OPN-B
NV_SI_SETTING_SAMSUNG_APPS_UPDATE_NOTIFY=packet

Anycall Wave II M210He

Hello,
I have flashed my M210 to wave II firmware not it works untill the phone goes to stand by mode, once it is into standby mode you can't unlock or wake it up from the dark screen..
am soo screwed,
Please help.
I have flashed many firmwares, the one that comes with Anycall M210 too.. yet the same problem.
any help???

Try official firmware : http://www.hotfile.com/dl/149639410/c232cb0/M210SKRLC1_M210SSKTLC1_SKT.zip.html

I flashed this firmwhere but didn't help, the problem remain the same

What you did...please tell me step by step
Because it is official Bada 2.0 firmware for M210S,there wouldn't be a problem

Firstly, i downloaded both the firmware and the downaloder 6.67
Flashed by selected the files appropriatly
all files successfully flashed successfully except the boot files...
i have to change them with other bootfiles from wave 2 firmware and it was flashed then
but after still is the same problem

it just doean't wake up after it goes into sleep mode ....
even though i have flashed the official firmware yet no hope

anybody ?

all files successfully flashed successfully except the boot files...
i have to change them with other bootfiles from wave 2 firmware and it was flashed then
but after still is the same problem
Click to expand...
Click to collapse
M210S is different as S8530...
TDMB...
If this is no Software feature so maybe few Chips different... maybe little tiny differences in Hardware...
I think you need back BOOTFILES from M210S...
Best Regards

can anyone provide me with a proper bootfiles ?

Nimra Khan said:
can anyone provide me with a proper bootfiles ?
Click to expand...
Click to collapse
Which i gave firmware it is full firmware and bootfiles is in inside

Sometimes Bootloader change is not more easy possible... during Security...
So it could be IMPOSSIBLE with Multiloader alone to jump back to Original M210S Boot...
One Hardcore way would be repair with JTAG...
Best Regards

adfree said:
Sometimes Bootloader change is not more easy possible... during Security...
So it could be IMPOSSIBLE with Multiloader alone to jump back to Original M210S Boot...
One Hardcore way would be repair with JTAG...
Best Regards
Click to expand...
Click to collapse
Yes its not happening with multi loader, tried almost a dozelian times.
I don't know anything about JTAG

http://forum.xda-developers.com/showpost.php?p=13582911&postcount=13
RIFF Box means for instance JTAG... solder wires etc...
Sorry, no other working solution known...
Best Regards

Other direction...
I have S8530 device... to do stupid tests.
I wish I could use M210S Firmware...
Nope... not possible...
1.
Check Screenshot from ML...
Many addresses DIFFERENT... means partition table is not 1:1...
2.
I have tried several combinations with Boot change... but not possible...
dbl Error...
Best Regards
Edit.
Short tested with XPKD6 Boot...
Same result...
Soon I will try bada 1.2 Boot... maybe then more luck to change Boot to M210S...
Btw... M210S Firmware bada 1.x with Bootfiles available somewhere?
Edit 2.
Flashed XXJK2 Boot (bada 1.x)... same result...
It seems not possible with Multiloader to jump back to M210S Bootfiles... or to flash S8530 with M210S Boot...

ONLY as info yet...
Maybe this year chance to fix this...
1.
I have realized during mistake...
I have forgotten to copy dbl.mbn into folder...
That Boot Change also work only with 1 file...
boot_loader.mbn
2.
I have found way to disable RSA 1024 check of Bootloader... Maybe this makes easier to flash back M210S Boot...
But need some time for tests and more investigation...
Best Regards

I have an idea... test later...
In boot_loader.mbn of M210S Firmware is SHW-M210S instead GT-S8530 String...
Warning! Don't try it self. You could brick your handset.
Best Regards
Edit 1.
Summary...
dbl.mbn is 1:1 same file like in S8530 DBT...
Edit 2.
Progress...
Bypassed apps_compressed.bin...
My fault... it seems size check... in last 1024 Byte aka end.bin...
Now I have taken from bigger file XPKD6...
Now I need to wait for *.app and CSC finish... then I'll post result...
Edit 3.
Code:
Download Start Ch[0]
FOTA 1817.7KB OK[0.9s]
Amss 13276.7KB OK[5.2s]
Apps 27000.8KB OK[12.7s]
Rsrc1 38797.3KB OK[14.8s]
Rsrc2 2987.3KB OK[1.4s]
FFS 191692.8KB OK[340.4s]
SHPAPP 191152.1KB OK[266.4s]
CSC 58662.9KB OK[106.7s]

-deleted -
Noobish question was here

did you flashed wave 3 firm. to wave 2? are your device can boot?
Click to expand...
Click to collapse
Wave 3 aka S8600 is COMPLETE different.
S8530 and M210S are similar... minor differences in Hardware...
S8500 is in this "Family Group"...
Simple check only folder BOOTFILES...
2 files for S8500,S8530,M210S:
Code:
boot_loader.mbn
dbl.mbn
Now look into S8600 XXKJC for instance has all files...
I can see 4 files, 2 more then the other group has...
Best Regards

adfree said:
Edit 2.
Progress...
Bypassed apps_compressed.bin...
My fault... it seems size check... in last 1024 Byte aka end.bin...
Now I have taken from bigger file XPKD6...
Now I need to wait for *.app and CSC finish... then I'll post result...
Edit 3.
Code:
Download Start Ch[0]
FOTA 1817.7KB OK[0.9s]
Amss 13276.7KB OK[5.2s]
Apps 27000.8KB OK[12.7s]
Rsrc1 38797.3KB OK[14.8s]
Rsrc2 2987.3KB OK[1.4s]
FFS 191692.8KB OK[340.4s]
SHPAPP 191152.1KB OK[266.4s]
CSC 58662.9KB OK[106.7s]
Click to expand...
Click to collapse
Bypassed apps_compressed.bin...
How did you do ?
BTW phone boot now ?
Nice progress

BTW phone boot now ?
Click to expand...
Click to collapse
No.
Maybe my mistake is end.bin from XPKD6 for apps_compressed.bin...
Also I have removed some Security with TriX...
http://forum.xda-developers.com/showpost.php?p=37540321&postcount=263
S8530 seems not accept or load apps_compressed.bin from M210S ...
Tests with Debug high in RC2 file no Bluescreen...
Bootloader I have taken from XXLA1 DBT...
Maybe I should try also Boot from XPKD6...
Will make more tests next days...
Best Regards
Edit 1.
apps_compressed.bin from KRLC1 is exact:
Code:
27001856 Byte ([B]25,8 MB[/B])
XPKD6 was bigger... but maybe not good for XXLA1 Boot...
Will check now other files for best end.bin...
Edit 2.
I have forgotten KRLF1 from M210S, but same result...
---------- Post added at 05:16 AM ---------- Previous post was at 04:19 AM ----------
Little progress with XPKD6 Boot...
Now CSC is not possible in Multioloader...
But I see progress bar moving in RC2 like on S8000 Jet...
I will create CSC with Wave_Remaker... and check again RC2 with Debug Level High...
Later more.
Best Regards
Edit 3.
Compared short *.so files... seems no Radio in M210S ?
Many *.so files more or different... Maybe interesting for study...