My device is ARC lt15i
I try to flash the kernel ArcKnight RC3.3 in order to install Arconium-ICS-4.0
after use fastboot to flash kernel, and push power button
it only short vibrate and black screen ,can't enter recovery.
but it can enter recovery by " fastboot boot XXX.img "
and setup the rom
does anyone can help...
redownload the kernel and reflash it...try this and let us know
OK, i have re-download kernel (Arcknight) and reflash it.
but it only can boot by fastboot (fastboot boot XXX.img) and use as normal.
it still can not boot by power button
lalakuo said:
OK, i have re-download kernel (Arcknight) and reflash it.
but it only can boot by fastboot (fastboot boot XXX.img) and use as normal
Click to expand...
Click to collapse
The correct command is fastboot flash boot nameofboot.img
I have try fastboot flash boot nameofboot.img
but can't boot the device.
it only Successful fastboot boot nameofboot.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shuold I need to check something else ?
The bad block is the issue, so you need to take it to a Service Centre as arpith.fbi said.
So, it is hardware's problem ?
I've see another post that they has same problem of bad block
But they can flash kernel Susessfully.
If I sent it to service center, how do I tell them bad block problem?
I'm a beginner with it ,sorry ....
lalakuo said:
So, it is hardware's problem ?
I've see another post that they has same problem of bad block
But they can flash kernel Susessfully.
Click to expand...
Click to collapse
Then do whatever they've done.
lalakuo said:
If I sent it to service center, how do I tell them bad block problem?
Click to expand...
Click to collapse
By the power of speech. :silly:
do you have an unlockd bootloader?. if so i can help you.
link-in said:
do you have an unlockd bootloader?. if so i can help you.
Click to expand...
Click to collapse
Ummm.. He's flashing kernels, so his bootloader is unlocked! :|
Sent from my LT15i using xda app-developers app
link-in said:
do you have an unlockd bootloader?. if so i can help you.
Click to expand...
Click to collapse
yes, i've unlock bootloader.
Related
Hello, I need help.
when I flash a custom kernel on my LT15a, said that the bootloader has encountered a bad block.
Now I can not flash any kenrel who is not the official.
how to fix this?
has a solution?
Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try using the command 'fastboot erase boot', then boot a kernel again.
sinkster©
still with the bad block
but thanks for the help!
Try flashing the entire firmware!
Sent from my LT15i using XDA
As above. Use flashtool to flash a stock firmware, then try fastboot again.
I read something about, and said that this problem is hardware.
will be truth?
or should I try what you guys said before?
Thank you.
EDIT : - well, I did everything I said and did not work, continue with the bad block and not boot if you have a custom kernel. anyway, thanks.
i think the "bad block" means a bad sector.
no matter how many times you flash a kernel/firmware, a bad sector is still a corrupted sector the the storage media because it is a permanent damage.
heihei_ivan said:
i think the "bad block" means a bad sector.
no matter how many times you flash a kernel/firmware, a bad sector is still a corrupted sector the the storage media because it is a permanent damage.
Click to expand...
Click to collapse
In the case of bad sectors in flash drives, hard drives, etc... we are able to re-format the disk and avoid the bad sector from file system (with the drawback of decreased drive size). Is it possible with nand flash (used in smart phones)?
NEWS ?
Well I suppose to format the entire boot sector!
Does Relocking the boot loader and unlocking again does help?
no, already did that too.
anyway, thanks
is there any way to flash a custom kernel without being fastboot?
I discovered that badblock prevents only the fastboot flash
No you cant without fastboot!
u can use flashtool
gire.prasad said:
No you cant without fastboot!
Click to expand...
Click to collapse
flashtool>fastboot toolbox>select kernel to flash
I have same problem with my wt 19i...so did you fix your problem? that is a hardware malfunction?
I Have The same issue too! WT19i
Hi guys,
I was about to move to JB rom, everything was going good. Flashed 1.39 HBOOT, unlocked bootloader, flashed recovery, but when I want to flash boot.img it gots stucked on sending boot.img.
I have tried with JB flash tool, tried it to flash manually but its the same.
In bootloader, it says its unlocked, HBOOT is 1.39.
Any suggestions?
I did a nandroid so Im on ICS again, but this is annoying.
Did u try it with this tool?
http://forum.xda-developers.com/showthread.php?t=1604439
could u post a copy which shows what happens when u try to flash it manually?
Did u erase cache before flashing the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
See if it helps
Tried, still the same
It hangs on this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Never seen this before ! Are you using the original HTC usb cable ? Fastboot devices comes up with the command ? Did you reboot the bootloader before trying again ?
Just thinking out loud here for a moment
Mr Hofs said:
Never seen this before ! Are you using the original HTC usb cable ? Fastboot devices comes up with the command ? Did you reboot the bootloader before trying again ?
Just thinking out loud here for a moment
Click to expand...
Click to collapse
Yes, Im using original USB cabel.
Yes, every other command works. I have flashed recovery before boot.img.
What do you mean by reboot the bootloader? With command or ?
Take another Boot.img.......
Gesendet von meinem HTC One X mit Tapatalk 2
Yes you reboot the bootloader
Fastboot reboot bootloader
Maybe this helps, i don't know what else you successfully flashed the recovery so the boot.img should not be a problem. Are you hiding extensions in windows (for files). Might want to check that the boot.img is not called boot.img.img had this problem a while ago with another customer
manne48 said:
Take another Boot.img.......
Gesendet von meinem HTC One X mit Tapatalk 2
Click to expand...
Click to collapse
Thats was the problem. I have extracted img from rom directly and now it works.
Never in the future I wont download img from thread just because Im lazy to extract it.
Thank you all
Cool
CASE CLOSED !
Hi!
I have a problem with my desire 300...When I turn it on,HTC logo pops up,vibrate 7 times and stops...I can enter in bootloader mode with vol down+power button...i tried to unlock bootloader and managed to get code for htcdev,and successfully "flash" bin file given by htc,but I can't confirm YES (that I wont unlock it) by power button...
Can someone help me?
Thanks!
Flash a stock rom
LukeHorizon said:
Flash a stock rom
Click to expand...
Click to collapse
Can I do it without unlocking bootloader? Where I can download it?
I dont know really right now, sorry
me also same problem can't unlock bootloader exparts plz help
duude
its stuck on the htc logo too. on desire 300... any one knows how to flash a new rom blabla?
I have same problem, phone freez with HTC log, i use unlock code from htcdev but i cant unlock, power er button dont work to say yes, unlock bootloader. If some one solv this problem or know how to pls post here, i read many page and also try many solution but dosnt work.
BR
htc stuck on logo
try to unlock through this site
http://www.htcdev.com/
flash custom recovery
http://www.4shared.com/rar/B6myOAHDce/Htc_desire_300_CWMRecovery_Phi.html
and then
copy this rom in mmc
http://d-h.st/t4R
Rise said:
try to unlock through this site
http://www.htcdev.com/
flash custom recovery
http://www.4shared.com/rar/B6myOAHDce/Htc_desire_300_CWMRecovery_Phi.html
and then
copy this rom in mmc
http://d-h.st/t4R
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi customer recovery unzip the folder and flash only recover.img on fastboot right?
if yes i unzip the folder i place recovery.img file on fastboot folder flash the recover but when i go to recovery phone stuck on this logo what to do?
try to change rom on my htc one x and the only thing now is going back to bootloader.
when i installed the rom says : installation done but is going only to bootloader.
what can i do?
celica553 said:
try to change rom on my htc one x and the only thing now is going back to bootloader.
when i installed the rom says : installation done but is going only to bootloader.
what can i do?
Click to expand...
Click to collapse
are you flash the boot.img via fastboot?
Thant said:
are you flash the boot.img via fastboot?
Click to expand...
Click to collapse
THANKS FOR YOUR ANSEWER. NO i dont know how to flash boot.img
i used the One_X_All-In-One_Kit_v2.3 but because im new i dont really kinow how to use it
can u help me pls?
celica553 said:
THANKS FOR YOUR ANSEWER. NO i dont know how to flash boot.img
i used the One_X_All-In-One_Kit_v2.3 but because im new i dont really kinow how to use it
can u help me pls?
Click to expand...
Click to collapse
Take the boot.img from your rom archive and place in your fastboot folder go in fastboot with the phoner then open cmd and runt the command fastboot flash boot boot.img
Why the hell you open two thread wit the same question it is difficult for the members to see what happend and the progress. Please fallow only one of your thread don't post it in two only in one
Thant said:
Take the boot.img from your rom archive and place in your fastboot folder go in fastboot with the phoner then open cmd and runt the command fastboot flash boot boot.img
Why the hell you open two thread wit the same question it is difficult for the members to see what happend and the progress. Please fallow only one of your thread don't post it in two only in one
Click to expand...
Click to collapse
REALLY THANKS, u just made my day
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before I flash freedom os rom on OnePlus 3. Now I go back to stock rom via adb sideload. But boot logo not change to stock rom it still freedom os rom logo. How can I change it? Help me please.:crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the same problem
boot logo?
Or do you mean boot animation?
---------- Post added at 21:30 ---------- Previous post was at 21:25 ----------
If you mean the boot logo, you can flash with this fastboot command:
fastboot flash LOGO "path to logo.bin"
for example
fastboot flash LOGO C:\Users\user\Downloads\original_logo.bin
https://www.androidfilehost.com/?fid=24694152805483311
I flashed the bootlogo but now I have a white line under the "powered by android" text
http://imgur.com/O212bcC
Real_Insanity said:
I flashed the bootlogo but now I have a white line under the "powered by android" text
http://imgur.com/O212bcC
Click to expand...
Click to collapse
Happened to me too any help appreciated!
minirill said:
Before I flash freedom os rom on OnePlus 3. Now I go back to stock rom via adb sideload. But boot logo not change to stock rom it still freedom os rom logo. How can I change it? Help me please.:crying:
Click to expand...
Click to collapse
Flash the "oos-bootscreen.zip" in twrp from here
k.s.deviate said:
Flash the "oos-bootscreen.zip" in twrp from here
Click to expand...
Click to collapse
In my case this is what happened (after I posted regarding the white-line problem as in - http://imgur.com/O212bcC
I had reverted to stock rom before seeing your post about the oos-bootscreen.zip hence I had to re-flash TWRP but to my surprise when I reboot to bootloader/fastboot mode I get a blank screen with the notification led White.
Can some one offer some insight on how I can restore fastboot mode? :-s this has never happened to me.
I think you have bricked your phone...
Reflash it with qualcomm msm8996 tool
matze19999 said:
I think you have bricked your phone...
Reflash it with qualcomm msm8996 tool
Click to expand...
Click to collapse
Cheers mate!! I managed to un-brick wow thanks again and keep up the good work
stizolo said:
Cheers mate!! I managed to un-brick wow thanks again and keep up the good work
Click to expand...
Click to collapse
No problem, if you need help, dm me