OneX EU Version vertical dark line on the middle of screen.
For me, I think it is related to LCD signal quality, maybe panel problem or screen cable problem. Anyway, it should be a HW problem.
The dark line is about 1 or 2 lines. It is okay with white screen, but has problem with light blue, yellow, green and light red pictures. It is not a constant problem. I can get the line removed by changing color with flashlight app. Sometimes, the dark is disappeared when you change screen colors in the app. Then it will come again at sometime.
Reboot, no help.
Anyone encountered such problem?
does sound like hardware, can you take a picture?
Attached pictures, you can see the line on blue screen and yellow screen. But nothing with white screen.
you could try safe mode (i think you have to hold volume down when restarting the device, until you feel it vibrate a few times), and then a factory reset if safe mode doesn't help, if it still persists, i'd go for replacement/repair
does look like hardware, although strange it doesn't show on white screen, but then again a dead pixel wouldn't show on a black screen, so can't rule out hardware
Many thanks for your advice. Since there is no such issue reported on the net, I just shared findings here. Maybe I will try factory reset later when I get backup ready.
lawrence750 said:
you could try safe mode (i think you have to hold volume down when restarting the device, until you feel it vibrate a few times), and then a factory reset if safe mode doesn't help, if it still persists, i'd go for replacement/repair
does look like hardware, although strange it doesn't show on white screen, but then again a dead pixel wouldn't show on a black screen, so can't rule out hardware
Click to expand...
Click to collapse
Have tried factory reset, no help.
I also can see this issue even on boot screen. So it is related to HW. But also I can make it fix sometimes with some screen fake out conditions. (by "color flashlight" tool).
Hi
jiazhen said:
Have tried factory reset, no help.
I also can see this issue even on boot screen. So it is related to HW. But also I can make it fix sometimes with some screen fake out conditions. (by "color flashlight" tool).
Click to expand...
Click to collapse
It is faulty, simple as that unfortunately.
Regards
Phil
Related
Hi all! I hope I'm not disturbing here, but I'm quite desperate with regards to my poor BA... After replacing the display about a year ago (the touch-sensitive layer had broken) everything was going well, but something bad has been happening for some months now, and I think it has come to the point of no-return...
At first, when I slid the BA open, there would be a point in which a change in the colors on the display happened, as if the the Red and Blue channels worked well while the Green one was dim (as noticeable during the boot process). Then, opening it completely, it came back to the normal state. The situation worsened, sort of "interference" could be seen while opening the BA, the touchscreen would lose calibration after some openings and closings and so on...
Now the worst: when I turn it on, the screen is completely blank and white; sliding it back and forth would once get it to work, but now it is completely useless. About halfway between the open and closed positions the backlight itself turns off and then on again. It is impossible to see anything and it is unusable!! I opened the BA and made sure everything was connected, I re-connected the LCD and the touchscreen cable but nothing changed... I don't know what to do...
Does anyone have any suggestions? Can I try to repair it or to have it repaired, or, as it is a bit visibly used, should I resign myself to saying it goodbye?? Thanks for your patience and help...
News!! I rried to replace the new screen with the old (broken touchscreen) one, and that one works. Save for a problem, the green colour is lightly dim in the exact positions in which the backlight goes off with the "new" but not working display... Does anyone have an explanation for this behaviour? Thanx again!!
I've got a problem with a OneX I'm trialling for work.
This is a stock device with the latest OTA update applied. I installed Good for Enterprise, activated it, and got my work emails. I opened a PDF attachment which opened for a couple of seconds then the display glitched.
The attached images show what I mean. The display is glitched for every screen. Soft resetting the phone was okay until it started again a couple of minutes later.
Soft resetting a 2nd time was where my real problems started. The phone vibrated as it started, but the display stayed dark. If I tap the power, the touch buttons light up. If I go through the motions of the lock ring and my gesture lock, I feel vibrations of my actions but can't see a thing. If I ring the phone, it rings, the touch buttons light up and the LED blinks. The display stays dark at all times.
Does anyone have any idea what's going on here? It's almost like when a graphic card overheats in a PC.
I would try a hard reset, see what that does, it should fix it as it looks like software problem
Squeeze your phone between thumb and forefinger (on the screen and rear cover) about 1.5-2cm in from the USB port, and slightly below. Let us know if the screen comes back on.
ZenithUK said:
I've got a problem with a OneX I'm trialling for work.
Click to expand...
Click to collapse
I think your phone is on drugs.
Seriously though, that's the scariest gfx bug I've seen on a phone.
Work were just as surprised as everyone else.
It's been sent back to them so they can talk with Vodafone about just what's happened with it.
In the few days I had it, it's a decent phone. The primary reason for considering the OneX is the screen size, and the fact you can read a PDF clearly on it.
ZenithUK said:
I've got a problem with a OneX I'm trialling for work.
This is a stock device with the latest OTA update applied. I installed Good for Enterprise, activated it, and got my work emails. I opened a PDF attachment which opened for a couple of seconds then the display glitched.
The attached images show what I mean. The display is glitched for every screen. Soft resetting the phone was okay until it started again a couple of minutes later.
Soft resetting a 2nd time was where my real problems started. The phone vibrated as it started, but the display stayed dark. If I tap the power, the touch buttons light up. If I go through the motions of the lock ring and my gesture lock, I feel vibrations of my actions but can't see a thing. If I ring the phone, it rings, the touch buttons light up and the LED blinks. The display stays dark at all times.
Does anyone have any idea what's going on here? It's almost like when a graphic card overheats in a PC.
Click to expand...
Click to collapse
Mine looks exactly the same once Ive had a few whisky's...
I had the exact same problem, so I shipped off my phone to service.
They actually changed the whole motherboard. I got my phone back 2 days ago, and it is working better than ever. Even better than before they changed the board.
My guess; Same problem as me. Busted motherboard. Im waiting to get a reply from the service guys that fixed my phone, so I can get some solid answers about what was actually wrong.
Hope this helps!
Best regards,
Sebastian
Hello, so I am experiencing a huge pain in my butt with my LG G3, the issue is that whenever I press the power on button to turn the screen on my screensaver pops up and looks completely fine, after about 5 seconds a white shadow starts to appear in the background and slowly starts to make certain parts of my screen invisible, but as soon as a lock my phone and turn the screen on its gone but the process starts again. May be a possible led problem or something else? I would appreciate any help I can get before I go and take the phone back to Verizon and see what they say.
What screen saver are u using? Have you tried hard reseting the phone?
ypsmav said:
What screen saver are u using? Have you tried hard reseting the phone?
Click to expand...
Click to collapse
Just a normal picture from my gallery nothing extravagant or anything, it's strange there are like dark streaks going down my screen, I cannot capture it on a screenshot so I'd have to post a picture of it.
Benzo1396 said:
Just a normal picture from my gallery nothing extravagant or anything, it's strange there are like dark streaks going down my screen, I cannot capture it on a screenshot so I'd have to post a picture of it.
Click to expand...
Click to collapse
Hello,
I have exactly the same problem. I am able to use the phone in all his features, but the display presents stripes of shadow white. These shadows disappears when phone gets locked and appears when unlocking after few seconds. How did you solve? Will the guarantee cover this problem?
Hello,
I have one issue with this mobile. Every time I am scrolling black text on white background or white text on black background I see green ghost or green auras around the text. It’s quite annoying. Its help when I change color temperature to more red, pink or blue, but it’s not very satisfactorily solution. So, my question is: Is that normal for that kind of display or something goes wrong? Could next update of firmware help?
Thanks for any answers and sorry for my English.
I do not see this behaviour on my phone... could it be a HW issue? Or something to do with the display resolution settings? I have left all display settings at their defaults.
My problem with display was solved by new update B130, but I have one more but smaller - I think that my touchscreen is not that sensitive it should be. Sometimes there no response on tap.
Lumpusus said:
My problem with display was solved by new update B130, but I have one more but smaller - I think that my touchscreen is not that sensitive it should be. Sometimes there no response on tap.
Click to expand...
Click to collapse
Looks like a hardware issue. Your phone must be still under warranty so you can take advantage of that.
Lumpusus said:
My problem with display was solved by new update B130, but I have one more but smaller - I think that my touchscreen is not that sensitive it should be. Sometimes there no response on tap.
Click to expand...
Click to collapse
Well , plz try for replacement . If u got success u will get a brand new phone in ur hand
Hi all. I have a rather weird issue. After droping(oops) my phone, I ordered a new lcd. I shelved the phone as it was unusable until the screen arrived. When the screen arrived, I saw that the battery was dead. I charged it and changed the lcd. That's for the backstory. Fast forward to now. When I open the phone, the screen lights up at full brightness as one would expect at the android one logo. It stays there at full brightness for about 8secs But as soon as it starts loading android the screen dims to absolute dark. In the beginning I thought the phone was closing, you can't see anything... Unless you close the lights.
But even in absolutely dark room, the screen is still very dim, barely discernible. The phone works absolutely fine otherwise, touch camera sound etc. I backtracked the process and put it's original screen on, but it does the same.
I tried disabling auto brightness it does nothing. In fact, changing brightness from the slider does absolutely nothing whatsoever.
Tried calibrating the sensors from the engineering menu(not sure it was called that, the one you enter when you put numbers on the call menu) they seem to be working, but the brightness doesn't change.
Tried removing the battery for a prolonged amount of time (around 6 hours iirc). Still same.
At this point i'm thinking:
1)Software problem. I will really need to hard reset the whole thing, which i'd rather not, and hope for the best.
2)Bad screen, which doesn't explain why the previous one has the same problem, or why the screen works during the logo.
I hope I was able to give enough info. Any help would be greatly appreciated. Thanks!
Hi, I'm having almost the same issue (display very dim, but for me it is always very dim) and this manifested not after any dropping or screen replacement, I guess I just wrongly inputed a button sequence that configured the mobile in this weird status. It is really annoying as it is almost impossible to unlock sims, basically the phone is unusable, very frustrating....
Hey there, did anyone found a solution for this issue?
Has anyone solved this problem?
Have you found what was causing this?
I’ve the same issue, replaced the lcd on a xiaomi mi a1 and the backlight is present at the logo startup but completely black after that.[br]
On a dark room I can barely see the screen and all it’s working, but adaptive light button is missing, seems like the bootloader is able to use the backlight but not android itself
I have the exact same problem, i really hope someone knows a solution to this. I tried pretty much anything within my capabilities