How do I flash an ics rom on my gingerbread rooted t989???? We never I flash aokp it boot loops! I been out of the loop a while can someone please help me???
Each ICS rom in the development section typically provides flashing instructions specific to the rom. I suggest you find the rom you want to flash and follow instructions in the OP. Keep in mind since you are currently running GB and wish to upgrade to ICS, you will need to flash an IGS radio. General flash instructions are usually as follows:
1. Factory Reset / Wipe Data or flash Darkside Superwipe
2. Flash Radio
3. Flash Rom
4. Reboot
5. Let rom settle for 5-10 mins, Reboot again
6. Enjoy. If you get a boot loop at this point or phone freezes at this point, flash Darkside Cache Wipe (which wipes cache, dalvik cache, and fixes permissions)
There's no special stuff I have to do before is it just like flashing a gb rom???
Same process, nothing special.
Sent from my SGH-T989 using xda app-developers app
Related
I used to flash my old htc's with wm 6 and wanted to know what steps I would need to take in order to put the new warm on my inc?
Sent from my ADR6300 using XDA App
I still remember my old XV6900
Its completely different now then it was in the good ol RUU windows rom days, now you download the rom and put it on your SD, do a Full wipe then flash
1. Make sure your rooted with a Custom Recovery (IE Clockworkmod Recovery)
2. Boot into Recovery and do a Nandroid backup just incase things go horribly wrong.
3. Do a full wipe*: Wipe Data/Factory Reset, Wipe Cache, and Wipe Dalvik Cache
4. Flash your rom from your Sd (IE Install Zip in CW)
5. Reboot
*It's usually recommended to do a Full Wipe when flashing between different roms, but if flashing to a new version of the same rom I would go with whatever the Dev advises,
Awesome! Thanks for the update!
Sent from my Incredible using XDA App
Hi. I currently own the CDMA Galaxy Nexus, and I have rooted it.
I'm new on Android, and I have many, many questions.
One of the many questions I have is about ROMs and Kernels.
I know how to download and put it in my phone. However, what I'm confused is if I have to wipe the data and do a factory reset before I install a new kernel.
That applies to ROMs as well. Currently, I have the Revolution HD ROM, and I like it. If I want to put on a new ROM, would I have to do a factory reset and then install it?
The rooting world is so very confusing... I hope that someone could help me out.
new rom:
wipe factory, cache, dalvik
flash rom
flash gapps (if required)
flash kernel
reboot.
upgrade rom:
same rom (standard unless specified otherwise by dev)
wipe cache,dalvik [optional]
flash rom
flash gapps (if required)
flash kernel
upgrade kernel:
wipe dalvik, cache
flash kernel
I would add, that at first it seems like a pain, but after awhile, it's no problem.
Also, when you flash a new ROM (and gapps, depending on instructions) I'd recommend waiting on flashing the kernel until you've booted into the ROM and given it some time.
Follow zephik's guide and also remember to backup your apps and data using titanium backup or nandroid. Also it would be a good idea backup your stock radio so that you can reflash it after you flash from and kernel.
Sent from my Galaxy Nexus using xda premium
I have a AT&T Samsung Galaxy S3 (SGH-1747) that is running stock with root.
I have rooted my phone using the samsung toolkit located here: http://forum.xda-developers.com/showthread.php?t=1746665
Since that toolkit flashed a CWM Based recovery I have installed ROM Manager and flashed CWM Recovery version 6.0.1.2
My questions are..
- with my current setup.. am I technically running the "Stock" samsung kernel?
- why would you want to flash a different kernel to your phone?
- and is it necessary to flash a different kernel in order to use certain custom roms?
- At first I was leaning towards flashing CM10 nightly but the more I look at it.. I want to flash PARANOIDANDROID 2.22 http://forum.xda-developers.com/showthread.php?t=1818199
Is this rom fully compatible with my AT&T phone? and since i'm running stock with root, do I need to do anything special before flashing this rom? Factory reset? Wipe Data? I've already made a full nandroid backup.
Thank you!
- with my current setup.. am I technically running the "Stock" samsung kernel? I believe so
- why would you want to flash a different kernel to your phone? Different kernels do different things.. some have better batter life.. some let you OC and UC..
- and is it necessary to flash a different kernel in order to use certain custom roms?Well sometimes.. Well technically.. most kernels will work with most of the ROMS out there.. as long as you stay withing your phones threads.. But some ROMs have a kernal with them.. and some ROMS you need to flash your own kernel..
Diamond22 said:
- with my current setup.. am I technically running the "Stock" samsung kernel? I believe so
- why would you want to flash a different kernel to your phone? Different kernels do different things.. some have better batter life.. some let you OC and UC..
- and is it necessary to flash a different kernel in order to use certain custom roms?Well sometimes.. Well technically.. most kernels will work with most of the ROMS out there.. as long as you stay withing your phones threads.. But some ROMs have a kernal with them.. and some ROMS you need to flash your own kernel..
Click to expand...
Click to collapse
Thank you for the reply.
On the rom i'm wanting to flash for my SGH-i747 http://forum.xda-developers.com/showthread.php?t=1818199
The steps for flashing are as follows:
CWM: Install Zip: Rom: Download Here Make sure the file you download is PA-2.22-d2att.zip
CWM: Install Zip: Gapps: Download (These are the new ones)
CWM: Wipe Data/Factory Reset
CWM: Advanced/Wipe Dalvik Cache
Reboot and edit your Apps Dpi & Layout under Settings/Paranoid Settings - DO NOT RESTORE YOUR OLD PROPERTIES FOR NOW
Would i need to wipe data, factory reset, then also wipe dalvik cache BEFORE I install the rom and gapps since i'm running stock with root?
Thank you
i'm also reading that for paranoidandroid you must first flash CM10 then flash paranoid.. is this accurate?
umm.. not sure where you saw that you need to flash a CM rom before flashing the paranoid ROM..
I believe the Paranoid rom is based off CM
The instruction on the link you have, in my opinion, is wrong..
The way that i flash my roms is...
Wipe data/factory reset..
Wipe Cache
Wipe Dalvik
Format/Data
Fomat/System ( i think deletes backups) only do in emergency.aka optional step
Flash ROM
Flash Gapps.
THATS IT
Some people will wipe cache afer flashing a rom..
But if you wipe data/factory reset i believe deletes the ROM...
Diamond22 said:
umm.. not sure where you saw that you need to flash a CM rom before flashing the paranoid ROM..
I believe the Paranoid rom is based off CM
The instruction on the link you have, in my opinion, is wrong..
The way that i flash my roms is...
Wipe data/factory reset..
Wipe Cache
Wipe Dalvik
Format/Data
Fomat/System ( i think deletes backups) only do in emergency.aka optional step
Flash ROM
Flash Gapps.
THATS IT
Some people will wipe cache afer flashing a rom..
But if you wipe data/factory reset i believe deletes the ROM...
Click to expand...
Click to collapse
If you are already running CM10 then you don't need to wipe Cache. Just dalvik and data. Im pretty sure thats what was confusing, since this is based off of CM10.
DarthDerron said:
If you are already running CM10 then you don't need to wipe Cache. Just dalvik and data. Im pretty sure thats what was confusing, since this is based off of CM10.
Click to expand...
Click to collapse
yeah, I just keep reading and reading.. probably making this out to be more difficult than it really is just don't want to end up with a brick or anything.
I'm already on stock + root + latest CWM so I just need to put the files on my phone and flash but I believe these are the steps i need to take:
1- Download ROM and Gapps to internal sd card
2- Boot phone into recovery
3- WIPE Cache/Delvik/Data factory reset> Mounts and Storage- format system
4- Flash ROM and Gapps
I want to flash the deodexed LJC stock rom to do the multi window mod hack. The problem is that I don't want to have to re-do everything on my device. Is it possible to just flash the deodexed stock rom over my current root stock rom? I don't think I've ever had to do this on any of my Androids and I have never asked. Any help or answers are definitely appreciated. :good::good::good:
Shouldn't be a problem as current system would be wiped beforehand. Data however wouldn't be touched. I would wipe cache&dalvik-cache before the flash just to be cautious.
billard412 said:
Shouldn't be a problem as current system would be wiped beforehand. Data however wouldn't be touched. I would wipe cache&dalvik-cache before the flash just to be cautious.
Click to expand...
Click to collapse
I prefer to wipe before and after flashes especially with twrp since it sticks the option right there for u. Somethings I only wipe after flashing tho like system mods and kernels. Going from ljc to ljc deodexed id flash the rom wipe caches and if u were using a custom kernel with stock flash it then wipe caches then fix permissions and reboot. If no kernel skip that step and continue on
So in summary:
1. Flash deodexed ljc
2. Wipe cache and dalvik
*3. Flash kernel
*4. Wipe cache and dalvik
5. Fix permissions
6. Reboot
7. Profit!!
* indicates optional steps
Sent from my SPH-L900 using Xparent ICS Tapatalk 2
Hi All,
Seem to have a slight problem with flashing Custom Roms onto my GNex at the moment. Not too sure what's causing it to freeze when booting up. All I get is the X logo and will stay there until the battery dies.
I'm able to revert back to a Google rom and regain use of my phone. Just can't seem to flash any custom roms at all. It's happened with CM10.1, CM10, XenonHD Stable-2.0, Minoco.
I've attempted to flash with CWM and TWRP. Both get the same results. Prior to flashing I've whiped both the Cache and Davlik.
I have previously used CM9 and older versions of Minoco on this device. So seems odd that this is happening now.
Any advise or ideas towards what I should look at would be appreciated.
Thanks,
Drav
you have wipe data before flashing different roms... dirty flashing(only wipe cahce and dalvik) is only if you are updating the same rom.. this is how i normally flash ALL roms
1. wipe data/factory reset
2. wipe system
3. wipe cache
4. wipe dalvik cache
5. flash rom
6. flash gapps
7. reboot
8. wait 10 mins then do another reboot
9. enjoy
PS- the 10 min wait and reboot is soemthing i do that IMO lets the new rom settle
Thanks k786,
It's booted up in a custom rom now after following those step by step. Much appreciated! :good:
Cheers,
Drav