Thanks to Hobby31 (http://forum.xda-developers.com/member.php?u=2360932) for figuring this out. I have taken his post, and rewritten for ease of reading. Tested and working on (at least) 2 phones so far.
How to restore a Nandroid or flash new ROM with CWM Touch
In CWM Touch Recovery
1. Go to mounts and storage and unmount cache.
2. Make a nandroid. (Going back to mounts and storage, you will see data is mounted and will not unmount.)
3. Go to "advanced" and select reboot recovery.
4. Once phone reboots into recovery, go back to mounts and storage and see that data is unmounted. You may now wipe data, system, and cache.
5. You may now restore a nandroid or flash a new rom.
Recommendation : As noted below, proper wiping matters when switching between roms, particularly from ICS to JB. Use superwipe from Mike (android revolution HD) when moving between roms. http://api.viglink.com/api/click?fo...="0" alt="">&jsonp=vglnk_jsonp_13416929577832
If this helped you, hit thanks. Also, thank hobby 31. Thread here. http://forum.xda-developers.com/showthread.php?t=1748049
EDIT 7-19-12 If you say "I've had no issues doing backups and restores with CWM," please ask yourself the following questions:
1. Are you using CWM Touch or non-touch? This is a Touch issue. If you are using the non-touch... you need not read further or report "I have no problems" because this is specifically related to Touch. (Please note I have not flashed the new 6.0 CWR Touch as some people are reporting problems with it also.)
2. Did you do multiple operations in the same recovery session? Meaning did you wipe data/factory reset, wipe cache, wipe delvik? Then did you try to flash a new ROM or restore a backup without restarting recovery? The reason this matters is because this issue of data not unmounting seems to happen in Touch CWM after a wipe is performed. You might be able to do one action per recovery session, but doing multiple actions that require data to be unmounted are what borks the operation and leaves some people hanging at the glowing X of "Oh crap I need to boot back into recovery."
Let me know if there are any problems, need for further clarification.
I flashed an older version of CWM (5.5.0.4) Non Touch version so I could flash JB but my SD card would not mount after I did a full wipe. Had to use the Toolkit to flash stock image. Do you know what would cause that to happen? People are saying to use the older version to flash JB and I want to try VanirBEAN ROM but don't want to run into the same SD mount issues.
I have not had any difficulty restoring cwm nandroid backups of other ROMs, or flashing other ROMs coming from V3. Have not had to resort to any of these steps. But I have seen a lot of threads about others having a lot of problems. Just curious if anyone has any theories about why this is?
Gallery69 said:
I flashed an older version of CWM (5.5.0.4) Non Touch version so I could flash JB but my SD card would not mount after I did a full wipe. Had to use the Toolkit to flash stock image. Do you know what would cause that to happen? People are saying to use the older version to flash JB and I want to try VanirBEAN ROM but don't want to run into the same SD mount issues.
Click to expand...
Click to collapse
I flashed the BAMF You Jelly Huh? ROM using the clockwork touch recovery and it worked flawlessly (I did wipe data though)
cam30era said:
I have not had any difficulty restoring cwm nandroid backups of other ROMs, or flashing other ROMs coming from V3. Have not had to resort to any of these steps. But I have seen a lot of threads about others having a lot of problems. Just curious if anyone has any theories about why this is?
Click to expand...
Click to collapse
After talking with others, I think my issue was after flashing the older CWM I did not reboot before moving forward with the wipe. Too chicken to try it again
I think it has to do with the coding in vicious and some of the initial releases of JB roms. Coupled with the data not unmounting at the proper time. A couple people also have mentioned that they didn't do as full of a wipe as is done with the super wipe script, hence why a lot of devs suggest using it to clean out old ics code.
Has nothing to do with Viscious. Same on JellyBelly 3.x Even when moving between JB roms, Data won't unmount when performing multiple operations.
I have flashed all three versions of Vicious' JB with CWM Touch and have not had a single problem. My process is as follows:
-Backup
-format /cache
-format /data
-format /system
-Wipe Dalvik cache
-Flash ROM
-Wipe Dalvik cache
-Reboot
-????????
-Profit
Team win recovery aka twrp. Everyone done says "use non touch recovery" it doesn't matter. Haven't had a single issue using twrp on this phone or any of my previous phones. It works great. Especially with super wipe scripts.
Sent from my Galaxy Nexus using Tapatalk 2
Omen87 said:
I have flashed all three versions of Vicious' JB with CWM Touch and have not had a single problem. My process is as follows:
-Backup
-format /cache
-format /data
-format /system
-Wipe Dalvik cache
-Flash ROM
-Wipe Dalvik cache
-Reboot
-????????
-Profit
Click to expand...
Click to collapse
Bingo. That's what superwipe does.
Added link to Mike's superwipe.
Sorry for the dumb question, but ive done a search and found conflicting answers. When you wipe data and cache do you want them to be mounted or unmounted?
Sent from my Transformer TF101 using Tapatalk 2
I have Touch CWM and I have no problems flashing back and forth between JB and ICS roms and nandroids.
You just have to flash a Super Wipe in between.
I just did this yesterday to test out my MHL adapter. Backed up my JB rom, super wiped, restored my ICS Liquid Rom, tested, super wiped, restored my JB rom.
I think super wipe is key in going between different rom builds. But I've had absolutely no problem using CWM at all. If Super wipe is the answer, then perhaps CWM's Factory Reset option isn't wiping as well as it should.
Flashing a SuperWipe is much easier then having to restart the phone a few times.
I think it may be related to Viscious old versions. Not Sure. Using Jelly Belly now. If you are not having problems, that's great. I used superwipe script. No problems. But, if people want the manual solution without getting errors, then at least we know the above method works. It might not be neccesary now with the newer releases, maybe data will unmount ok.
If anyone wants to test and see if they can restore old backups from ICS w/out doing the above steps (IE the rebooting) and report back, it'd be appreciated. I will be uber busy the next couple days or I'd take the time to backup to my computer before trying.
Would you mind sending me the super wipe script to flash? Or point me to the thread?
Sent from my Galaxy Nexus using xda premium
mikeacela said:
Would you mind sending me the super wipe script to flash? Or point me to the thread?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Link on Page 1... Sorry, I'm on my phone or I'd paste it for you.
player911 said:
I have Touch CWM and I have no problems flashing back and forth between JB and ICS roms and nandroids.
You just have to flash a Super Wipe in between.
I just did this yesterday to test out my MHL adapter. Backed up my JB rom, super wiped, restored my ICS Liquid Rom, tested, super wiped, restored my JB rom.
I think super wipe is key in going between different rom builds. But I've had absolutely no problem using CWM at all. If Super wipe is the answer, then perhaps CWM's Factory Reset option isn't wiping as well as it should.
Flashing a SuperWipe is much easier then having to restart the phone a few times.
Click to expand...
Click to collapse
I'm running CWMR 5.8.0.2 and I've restored my ICS roms over several JB roms without issue and no use of any sort of superwipe script.
nhizzat said:
I'm running CWMR 5.8.0.2 and I've restored my ICS roms over several JB roms without issue and no use of any sort of superwipe script.
Click to expand...
Click to collapse
This. ^^^^^^
Sent from my Galaxy Nexus using xda app-developers app
nickles96 said:
This. ^^^^^^
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Are you using Touch Based CWMR? Or Standard.
I can confirm even with Jelly 3.6, that after I wipe data, cache, and delvik that the data will then remain mounted and not unmount unless I restart recovery.
This can/does cause problems and messes up operations when people are doing multiple actions in recovery at the same time. You might be able to do one action, such as making a backup just fine. But if you are using CWMR Touch, you might have issues with doing multiple operations in the same recovery session, like, backup, wiping, then restoring if the action you are doing requires data to unmount.
So, if you say "I have no problems..." please confirm that you are using touch recovery... not just standard.
CWM Touch was updated to 6.0.0.5 this week, is this issue still present? I haven't experienced any problems yet using CWM Touch, I'm just curious.
My steps are 1. Backup 2. Wipe data/factory reset 3. Wipe cache partition 4. Wipe Dalvik cache 5. Flash ROM 6. Flash GApps if needed 7. Reboot
Related
I tried a ROM update today (Magnolia) and my phone is now seriously slow (including SpeedTest which shows about 50Kbps download speed). I attempted to reinstall the same ROM and to restore a Nandroid (neither of which has helped). I did every wipe present in CWM v2.5.1.2 (I know v3.x.x.x is not a good wiper) and in HBOOT, also all to no avail.
It is possible that the ROM is focused on carefully updating itself rather than completely overwriting.
Does anyone have a recommendation as to the best way to really ensure that no old runaway processes are surviving the flashes (ROM or Nandroid)? I am wondering if flashing another ROM would do it (it wouldn't try to update), but am very open to suggestions.
Thanks!
I had the same problem when I would install a rom with the CW 3.0.0.8 and it will just update the current rom, and not do a full wipe like I just to get before with the CW 2.x.x.x what I have done to get a clean install is this...
- I dont use the Rom Manager no more to update...
- Boot into Recovery and do the Following before you install a new Rom..
1-) Wipe Data/ Factory Reset
2-) Wipe Cache Partition
3-) Install the Rom .Zip with CW
Thats how I have done it before hope it helps...
Dont use rom manager to install go into recovery. Do a factory reset twice, then goto mounts and storage and format manually, data, cache, system, boot. Do that twice or more and youre super wiped as you put it. But as far as magnolia goes...did you make sure that you dl'd the flashover and not the whole rom?
Sent from my ADR6300 using XDA App
Thanks
Pete - Thanks. I never use RomManager to do ANYTHING (and remain surprised that people do). I do factory reset and wipe in CWM but never formatted system; which I just posted in the Magnolia forum as being what I thought is causing all the trouble. At least this lets me know how to manually do it. Thanks
1107963 said:
I had the same problem when I would install a rom with the CW 3.0.0.8 and it will just update the current rom, and not do a full wipe like I just to get before with the CW 2.x.x.x what I have done to get a clean install is this...
- I dont use the Rom Manager no more to update...
- Boot into Recovery and do the Following before you install a new Rom..
1-) Wipe Data/ Factory Reset
2-) Wipe Cache Partition
3-) Install the Rom .Zip with CW
Thats how I have done it before hope it helps...
Click to expand...
Click to collapse
Building on this- I do EVERYTHING from recovery. In addition to the steps listed I also go to "mounts and storage" and wipe /system, /data, /cache, and /boot. Eradicate!
Sent from my ADR6300 using XDA Premium App
I gave out a loud guffah when reading this thread title. Maybe stuff's just funnier before having coffee.
johnchad14 said:
I gave out a loud guffah when reading this thread title. Maybe stuff's just funnier before having coffee.
Click to expand...
Click to collapse
Right? Super Charmin came to mind right away.
Sent from my ADR6300 using XDA App
So I have a rooted (latest unrevoked) EVO with stock ROM. Radio is the current version so I did not need to flash a new radio. I have the rom backed up with rom manager and also a Titanium Backup.
I download Cm7-final with Rom Manager and proceed to flash it. All appears well until it loads and I'm stuck in CM7 splash bootloop and never get into the actual OS/homescreen. I boot to recovery and restore my prior rom backup, luckily all is fine.
My question is what have i done wrong? I read the EVO CM7 Wiki and it looks like I followed the instructions correctly. Do I need to ditch using RomManager and try it manually? Any suggestions on why I got this bootloop?
i had the same problem when i tried to update on the g2. i backed up the phone and wipe data and caches and flashed again the it worked you might have to do it acouple of times
Sent from my SGH-T959 using XDA App
KNguyen104 said:
i had the same problem when i tried to update on the g2. i backed up the phone and wipe data and caches and flashed again the it worked you might have to do it acouple of times
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Using the RomManager interface I chose to Wipe Data and Cache and also chose the gapps package to install. I guess I could try it again but I was mystified why it didnt work since I "thought" it was so simple.
If you're coming from a sense rom, wipe cache, data, dalvik, system, boot, basically everything but the sd card. After that, flash cyanogenmod, then gapps, then start the phone.
Sent from my hand with XDA Premium installed
snowboarda42 said:
If you're coming from a sense rom, wipe cache, data, dalvik, system, boot, basically everything but the sd card. After that, flash cyanogenmod, then gapps, then start the phone.
Sent from my hand with XDA Premium installed
Click to expand...
Click to collapse
I'm an android noob, you'll have to forgive me. I thought when I selected "wipe data and cache" prior to flashing CM7 in the RomManager interface that it meant it would wipe all of that.
So I need to manually wipe everything except the card? Also, a secondary question, will any of this jeopardize the ability to restore my currently backed up stock sense rom if **** hits the fan?
Alpine- said:
I'm an android noob, you'll have to forgive me. I thought when I selected "wipe data and cache" prior to flashing CM7 in the RomManager interface that it meant it would wipe all of that.
So I need to manually wipe everything except the card? Also, a secondary question, will any of this jeopardize the ability to restore my currently backed up stock sense rom if **** hits the fan?
Click to expand...
Click to collapse
No it won't as long as you have a nandroid. Look up the "VR Superwipe," and flash it. I'd recommend booting into recovery manually and doing this. Wipe cache and dalvik after flashing the superwipe for good measure. Finally flash the ROM.
Sent from my PC36100 using Tapatalk
Alpine- said:
So I have a rooted (latest unrevoked) EVO with stock ROM. Radio is the current version so I did not need to flash a new radio. I have the rom backed up with rom manager and also a Titanium Backup.
I download Cm7-final with Rom Manager and proceed to flash it. All appears well until it loads and I'm stuck in CM7 splash bootloop and never get into the actual OS/homescreen. I boot to recovery and restore my prior rom backup, luckily all is fine.
My question is what have i done wrong? I read the EVO CM7 Wiki and it looks like I followed the instructions correctly. Do I need to ditch using RomManager and try it manually? Any suggestions on why I got this bootloop?
Click to expand...
Click to collapse
I had the same issue....although mine have been caused by restoring system data.
What I did is manually DL the rom, boot into recover, wiped cache/dalvic, flashed from zip (Both CM7 and the proper GAPPS file) and it worked.
eventer289 said:
No it won't as long as you have a nandroid. Look up the "VR Superwipe," and flash it. I'd recommend booting into recovery manually and doing this. Wipe cache and dalvik after flashing the superwipe for good measure. Finally flash the ROM.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
nandroid? So the RomManager rom backup I created isnt sufficient? I also have a full Titanium Backup saved too. Why Nandroid? I was under the impression this was just a similar app to Titanium - wrong?
Thanks for the input guys.
Alpine- said:
nandroid? So the RomManager rom backup I created isnt sufficient? I also have a full Titanium Backup saved too. Why Nandroid? I was under the impression this was just a similar app to Titanium - wrong?
Thanks for the input guys.
Click to expand...
Click to collapse
So wait, still getting the loops?
teh roxxorz said:
So wait, still getting the loops?
Click to expand...
Click to collapse
I have no tried since I got all these suggestions. Sorry for the confusion. I suspect manually wiping and manually installing will work.
Alpine:
When I first started flashing stuff I relied on the Clockwork app to do everything. I used it to flash roms and clear/wipe data and cache. However, after running into problems like yours I started doing it manually.
What I started doing was booting into RECOVERY (i know it sounds scary but it really isn't) A little off topic but there is a great app that I think every rooted user should use, it's called: Reboot Control Widget It only costs a measly $1 in the Market but it's well worth it. Basically you put the widget on the desktop and click on it. You are then given the option to Reboot your phone, Hot Boot (fast reboot), boot into Recovery, Bootloader or Shut Down. Best dollar you will ever spend on an app.
So anyway, l strayed from my point. The problem you are experiencing is partially due to not having fully wiped your phones data/cache. I know you think you did it through the Clockwork app but from experience it doesn't work that well. There is a "flashable" file called Calkulin's Format All. It is in the DEV section posted in Calkulin's Rom section. It will clear everything except the contents of your SD card.
1. Boot into RECOVERY
2. find: INSTALL ZIP FROM SDCARD
3. select the Calkulin's Format ALL.zip file (your phone will be totally clean after this)
4. Again, choose INSTALL ZIP FROM SDCARD
5. Select the ROM you want to flash. (If it is a Cyanogen based ROM you will have to flash the appropriate Google Apps file after flashing the ROM. If flashing a Sense ROM the Gapps file is not necessary)
6. Flash Gapps file (Google apps if necessary)
7. Once this is done select REBOOT SYSTEM NOW
I feel confident that if you follow those steps you won't run into any bootloops!
I have added the Format All.zip file that I mentioned in my last post.
Little advice:
- take the time to do a Nandroid before flashing a new rom
- use Titanium to restore only the apps w/o the data. I know it's nice to restore everything the way you had it on the last rom but from my experience this has led to instability in the new rom. Also from my experience when you are on a SENSE rom and use Titanium to backup your files and data when you install a AOSP (like CM) rom and try to restore those files and data it won't even let you. Just something to keep in mind if you are switching between CM to Sense or vice versa.
Alpine- said:
I have no tried since I got all these suggestions. Sorry for the confusion. I suspect manually wiping and manually installing will work.
Click to expand...
Click to collapse
Yes it should.
Manually wipe you factory/data, cache, dalvik, then flash the rom with the latest gapps and you'll be good.
SantinoInc said:
Alpine:
When I first started flashing stuff I relied on the Clockwork app to do everything. I used it to flash roms and clear/wipe data and cache. However, after running into problems like yours I started doing it manually.....
Click to expand...
Click to collapse
Wow, great post. Very informative and detailed, thanks a lot.
So why is creating a nandroid backup better than the ROM backup function in RomManager? I restored that rom once and it worked flawlessly. How does nandroid differ from the rom backup created in RomManager?
when you use clockwordmod recovery to wipe your phone the dalvik doesn't wipe with the wipe option you see on the main screen, i belive you will see the option to wipe it in the advanced menu
Alpine- said:
Wow, great post. Very informative and detailed, thanks a lot.
So why is creating a nandroid backup better than the ROM backup function in RomManager? I restored that rom once and it worked flawlessly. How does nandroid differ from the rom backup created in RomManager?
Click to expand...
Click to collapse
They are the same. ROM Manager boots you into recovery and nandroids for you. People have mixed experiences with ROM Manager. From my experience it is best just to boot manually into recovery and take care of all your flashing and wiping there.
Sent from my PC36100 using Tapatalk
I have installed MildWild CM-2.7 on my Desire but there is now MildWild CM-2.8 and I can't find a guide how to install/update my Desire.
I have got S-OFF and recovery by Revolutionary The guide I followed to S-OFF and ROOT
This is the ROM I using. MildWild CM ROM
Just flash it via recovery like you did with the previous version
Will flashing the new version cause me to loose everything on my current version I.e apps and data etc??
Thanks for the reply though
do back up first, wipe davik+cache and flash it... it should work if not do full wipe and restore back up
just post any result we will move from there
What should I use to hackup TIbackup? Or is there a better one that you reccomend?
Wh000sher
Titanium and recovery. All basic stuff. Have a,read of my rooting faq in my signature. Tells you everything you need to know
Sent from my HTC Desire using Tapatalk
rootSU said:
Titanium and recovery. All basic stuff. Have a,read of my rooting faq in my signature. Tells you everything you need to know
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Do I only restore the Titanium I am guessing, as restoring recovery would revert back to my current ROM? and I have thanks
Yes indeed. With titanium, only restore "missing apps with data".
Theres a guide Angusc wrote here:
http://forum.xda-developers.com/showthread.php?t=1480343
ROM Manager can make updating so much easier - well worth the investment.
JohnHarrisNZ said:
ROM Manager can make updating so much easier - well worth the investment.
Click to expand...
Click to collapse
I can't speak for other devices but for Desire, nope it's not worth the time and money.
kotag82 said:
do back up first, wipe davik+cache and flash it.
Click to expand...
Click to collapse
So I'm only wiping the davik cahce correct?
Not anything else or have I missed something?
Wh000sher said:
So I'm only wiping the davik cahce correct?
Not anything else or have I missed something?
Click to expand...
Click to collapse
Things I've learned with all this flashing that may be helpful for you.
1. Before flashing, always backup your current system up. nandbackup via recovery, titanium for your apps, sd card if really needed for that you need to do.
2. If flashing an updated version of same rom, wipe cache and dalvik only on your recovery (unless explicitly specified by dev to make a full wipe.)
3. If you are having weird issues after upgrading the same rom, do a full wipe and start fresh. If issue is not resolved, report the issue to the Dev's thread.
4. Do a Full Wipe on recovery (System/factory, cache, dalvik if coming from a different rom).
stankyou said:
Things I've learned with all this flashing that may be helpful for you.
1. Before flashing, always backup your current system up. nandbackup via recovery, titanium for your apps, sd card if really needed for that you need to do.
2. If flashing an updated version of same rom, wipe cache and dalvik only on your recovery (unless explicitly specified by dev to make a full wipe.)
3. If you are having weird issues after upgrading the same rom, do a full wipe and start fresh. If issue is not resolved, report the issue to the Dev's thread.
4. Do a Full Wipe on recovery (System/factory, cache, dalvik if coming from a different rom).
Click to expand...
Click to collapse
Thanks for the reply.
In response to 2. I am using ClockworkMod as my Recovery and I am guessing you mean I have to wipe 'cache partition' and 'wike dalvik cache' under advanced?
I am creating a guide to help fellow N00bs how to update a rom and change between ROM's
Wh000sher
Wh000sher said:
Thanks for the reply.
In response to 2. I am using ClockworkMod as my Recovery and I am guessing you mean I have to wipe 'cache partition' and 'wike dalvik cache' under advanced?
I am creating a guide to help fellow N00bs how to update a rom and change between ROM's
Wh000sher
Click to expand...
Click to collapse
Yes if I remember correctly there are the first three lines on that recovery is wipe system, cache partition (like you stated), and wipe dalvik. So if upgrading just wipe cache partition and dalvik cache.
System partition is where the "Android OS" resides. Wiping it is like formatting your computer. Most of the time, incremental updates of the same rom requires you to wipe just the cache partition and dalvik, otherwise if the rom update has a lot of changes, the dev might require you to wipe all three options on the recovery.
Having wiped my cache and dalvik cache. I am now wanting to install the new version. On the main screen I have 2 options which are tempting to click.
One is 'Apply update from SD card' and the other is 'Install zip from SD card'
I am unsure of which to choose but my gut instinct is to go with 'Install zip from SD card', is this correct or am i going to make a terrible mistake?
wh000sher
Install zip from SD
Hi all, I'm pretty familiar with flashing custom ROMs as I previously had a Samsung Galaxy S Captivate.
I recently got a Telus T989D, and I'm having some frustrating problems trying to flash a custom ROM. I have ClockWorkMod Recovery installed, and have been trying to flash various Cyanogen CM9 ROMs onto the phone. They all install properly, but once it gets to the Cyanogen splash screen (with the Android man turning angry for CM9), it gets stuck here.
I thought perhaps I needed to flash my radio, since all these custom ROMs were for the T-Mobile T989 "hercules" model. So I flashed the SGH-T989_UVLE1_radio.zip hoping that would work. Same problem.
Kind of at a road block here - any suggestions would be very much appreciated. Thanks!
Rhombuss said:
Hi all, I'm pretty familiar with flashing custom ROMs as I previously had a Samsung Galaxy S Captivate.
I recently got a Telus T989D, and I'm having some frustrating problems trying to flash a custom ROM. I have ClockWorkMod Recovery installed, and have been trying to flash various Cyanogen CM9 ROMs onto the phone. They all install properly, but once it gets to the Cyanogen splash screen (with the Android man turning angry for CM9), it gets stuck here.
I thought perhaps I needed to flash my radio, since all these custom ROMs were for the T-Mobile T989 "hercules" model. So I flashed the SGH-T989_UVLE1_radio.zip hoping that would work. Same problem.
Kind of at a road block here - any suggestions would be very much appreciated. Thanks!
Click to expand...
Click to collapse
Oh, and to clarify in case anyone asks - I have been doing data/cache/Dalvik wipes in recovery before installing the ROM.
Rhombuss said:
Oh, and to clarify in case anyone asks - I have been doing data/cache/Dalvik wipes in recovery before installing the ROM.
Click to expand...
Click to collapse
If you are running CWM 5.0.2.7 non touch recovery, you have to use TDJs Superwipe script first to wipe data partition and system partition. Then you flash the ICS radio (if you haven't done so already) then the CM9 ROM, then ICS Gapps.
After this you need to flash TDJs Cache Wipe script. This will properly wipe cache, dalvik, and fix permissions. CWM 5.0.2.7 doesn't wipe and align the cache properly and gives problems. I never had any issues with CWM when running those scripts and it boots up everytime.
Alternatively, you may want to install TWRP 2.2.2 instead of CWM. It's a touch based recovery, but very simple to use and much better than CWM in my opinion. You also don't need to run the scripts since the data and system are wiped properly and cache and dalvik are also cleared properly as well.
If you go to the development section, under the TWRP thread, and search for flashable zip, there is a 2.2.2 flashable available that you can use in CWM. Then the next time you boot into recovery you will be in TWRP instead of CWM.
Chochiwpg said:
If you are running CWM 5.0.2.7 non touch recovery, you have to use TDJs Superwipe script first to wipe data partition and system partition. Then you flash the ICS radio (if you haven't done so already) then the CM9 ROM, then ICS Gapps.
After this you need to flash TDJs Cache Wipe script. This will properly wipe cache, dalvik, and fix permissions. CWM 5.0.2.7 doesn't wipe and align the cache properly and gives problems. I never had any issues with CWM when running those scripts and it boots up everytime.
Alternatively, you may want to install TWRP 2.2.2 instead of CWM. It's a touch based recovery, but very simple to use and much better than CWM in my opinion. You also don't need to run the scripts since the data and system are wiped properly and cache and dalvik are also cleared properly as well.
If you go to the development section, under the TWRP thread, and search for flashable zip, there is a 2.2.2 flashable available that you can use in CWM. Then the next time you boot into recovery you will be in TWRP instead of CWM.
Click to expand...
Click to collapse
I just installed TWRP and I'm still running into the same issue. The Cyanogen splash screen just runs indefinitely. Looks like that wasn't the problem? Does it matter if you're rooted or not, if you try to flash a ROM from recovery?
Rhombuss said:
I just installed TWRP and I'm still running into the same issue. The Cyanogen splash screen just runs indefinitely. Looks like that wasn't the problem? Does it matter if you're rooted or not, if you try to flash a ROM from recovery?
Click to expand...
Click to collapse
Use the Darkside Superwipe to recreate all your partitions correctly. Sometimes when they are not aligned properly (by TWRP) you get weird boot hangs.
Don't restore data! Instead back everything up with something like Titanium and restore user apps only after the ROM has booted and you are satisfied.
+1 for the last post. Should work 100%!
Sent from my SGH-T989 using xda premium
---------- Post added at 12:17 AM ---------- Previous post was at 12:09 AM ----------
http://forum.xda-developers.com/showthread.php?t=1477955
Sent from my SGH-T989 using xda premium
Hi all, I had flashed successfully before but wanted to flash to a JB rom. I wiped and flashed, but then it just keeps looping the Samsung load screen, then I see the loading bar... and it reboots and goes back to the loading bar... Did I mess something up? Or is it suppose to do this the first time?
Sometimes it gets as far as the t-mobile 4G screen and the loops back again...
Thanks
What did you wipe?
Sent from my SGH-T989 using xda app-developers app
And what did you wipe with?
If you used an older clockwork mod recovery, you probably need to update your recovery or get one of the updated wipe scripts on this forum.
Sent from my Nexus 7 using Tapatalk 4 Beta
Have some question for you:
1/ What JB rom you flash?
2/ What recovery mod u used? (TWRP or CWM?)
3/ Did u wipe data / wipe cache / wipe devil ???
nguyenduytan said:
Have some question for you:
1/ What JB rom you flash?
2/ What recovery mod u used? (TWRP or CWM?)
3/ Did u wipe data / wipe cache / wipe devil ???
Click to expand...
Click to collapse
I tried to flash Infamous S2 as well as Jedi Mind Trick. After more reading, I also flashed the "wipe" zip file that was linked. After I flashed that clean wipe, all is well. For some reason when I did the usual wipe wipe (with CWM), stuff probably didn't get over written.
All is well and working smoothly now with Jedi Mind Trick
sky322 said:
I tried to flash Infamous S2 as well as Jedi Mind Trick. After more reading, I also flashed the "wipe" zip file that was linked. After I flashed that clean wipe, all is well. For some reason when I did the usual wipe wipe (with CWM), stuff probably didn't get over written.
All is well and working smoothly now with Jedi Mind Trick
Click to expand...
Click to collapse
it's a combination of how partition gets accessed vs custom recovery(in this case type of wipe) that cause that bootloop.
Provided you didnt have a bad download(.zip bein flashed) If it's a custom ROM suffice to say u need Darkside super wipe.
Unless its a stock (modded) ROM then Infamous super wipe is the way to go.
Hit thanks if/when it helped.