I'm sorry if the answer to this was posted somewhere else. But I wasn't able to find any info about this.
When I try to flash cyanogenmod 9 or 10 on my sgh-i747m, I get an error .....
script aborted: assert failed: getprop("ro.produ
ct.device") == "d2att" | | getprop("ro.build.prod
uct") == "d2att"
assert failed: getprop("ro.product.device") == "
d2att" | | getprop("ro.build.product") == "d2att"
E:Error in /sdcard/cm-9-20120812-NIGHTLY-d2att.zip
(Status 7)
Installation aborted.
I've never experienced this before, and I'm not sure what this error means.
Any help would be greatly appreciated.
http://forum.xda-developers.com/showthread.php?t=1829042
Hi so I tried flashing the new PACman all in one rom today, and usually I don't have problems with flashing roms but I had an error today.
This is what it said on my CWM:
-- Installing: /emmc/Download/hercules_PAC_jb-al
pha-v18.0.0.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "
-T989" | | getprop("ro.build.product") == "SGH
-T989" | | getprop("ro.product.device") ==
"hercules" | | getprop("ro.build.product") == "h
ercules"
E:Error in /emmc/Download/hercules_PAC_bj-alhpa-
v18.0.0.zip
(Status 7)
Installation aborted.
I'm quite new to all this so if anyone knows how to fix this please reply with steps asap! Thank you!
It may just be that you had a bad download. Try downloading the ROM again, maybe with a different browser.
Sent from my beastly Galaxy S 2.
Hey guys I've an Xperia S. I've rooted it, installed CWM recovery on it, unlocked the bootloader, then wiped cache partition and dalvik cache and also the data but im getting this error everytime I try to install a custom ROM:
-- Installing: /sdcard/MIUIv5_3.3.29_nozomi.zip
Finding update package...
I:Update location: /sdcard/MIUIv5_3.3.29_nozomi.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "LT26i" || getprop("ro.build.product") == "LT26i" ||
getprop("ro.product.device") == "LT26ii" || getprop("ro.build.product") == "LT26ii" ||
getprop("ro.product.device") == "LT26" || getprop("ro.build.product") == "LT26" ||
getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi"
assert failed: getprop("ro.product.device") == "LT26i" || getprop("ro.build.product") == "LT26i" || getprop("ro.product.device") == "LT26ii" || getprop("ro.build.product") == "LT26ii" || getprop("ro.product.device") == "LT26" || getprop("ro.build.product") == "LT26" || getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi"
E:Error in /sdcard/MIUIv5_3.3.29_nozomi.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/MIUIv5_3.3.29_nozomi.zip")
Dont know whats this 'status 7' is. Please help! I've tried many ROMs many times but none working.
just delete the error text on updater-script on android floder on your zip flashable rom
I have already had this error
Cht0in3 said:
just delete the error text on updater-script on android floder on your zip flashable rom
I have already had this error
Click to expand...
Click to collapse
I've accesed the updater-script. Now can you tell me which text to remove from there?
sirius_gamer said:
I've accesed the updater-script. Now can you tell me which text to remove from there?
Click to expand...
Click to collapse
Check this
http://forum.xda-developers.com/showthread.php?t=1607135
Sent from my LT26i using Tapatalk 2
sirius_gamer said:
I've accesed the updater-script. Now can you tell me which text to remove from there?
Click to expand...
Click to collapse
The first 2 lines generally that say about get prop
Or flash advanced stock kernel then try flash
Sent from my 4.2.2 Xperia S via Tapatalk
Ben36 said:
The first 2 lines generally that say about get prop
Or flash advanced stock kernel then try flash
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
These are the updater-script of two different ROMs. Can you tell me exactly which lines to delete?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone?
Sent from my LT26i using Tapatalk 2
sirius_gamer said:
Anyone?
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
I saw your post, but really don't know.
Never had that problems, have you tried to flash different kernel then ROM?
Or extract kernel from this and tried to flash with PC.
Sent from my LT26i using Tapatalk 2
sirius_gamer said:
Hey guys I've an Xperia S. I've rooted it, installed CWM recovery on it, unlocked the bootloader, then wiped cache partition and dalvik cache and also the data but im getting this error everytime I try to install a custom ROM:
-- Installing: /sdcard/MIUIv5_3.3.29_nozomi.zip
Finding update package...
I:Update location: /sdcard/MIUIv5_3.3.29_nozomi.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "LT26i" || getprop("ro.build.product") == "LT26i" ||
getprop("ro.product.device") == "LT26ii" || getprop("ro.build.product") == "LT26ii" ||
getprop("ro.product.device") == "LT26" || getprop("ro.build.product") == "LT26" ||
getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi"
assert failed: getprop("ro.product.device") == "LT26i" || getprop("ro.build.product") == "LT26i" || getprop("ro.product.device") == "LT26ii" || getprop("ro.build.product") == "LT26ii" || getprop("ro.product.device") == "LT26" || getprop("ro.build.product") == "LT26" || getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi"
E:Error in /sdcard/MIUIv5_3.3.29_nozomi.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/MIUIv5_3.3.29_nozomi.zip")
Dont know whats this 'status 7' is. Please help! I've tried many ROMs many times but none working.
Click to expand...
Click to collapse
Check the md5 hash..
Redownload. Looks like a bad download to me..
Sent from The Beauty - Xperia S
-Harsh- said:
Check the md5 hash..
Redownload. Looks like a bad download to me..
Sent from The Beauty - Xperia S
Click to expand...
Click to collapse
You're right, we forgot md5.
I'm guessing he already tried different ROM's or download again that MIUI.
If not, then you know for the future.
Always check your downloaded file, that's the first thing you need to check.
Sent from my LT26i using Tapatalk 2
Maybe you should try to wipe everything, then flash new kernel, then the rom ( clean install ). Download the file again, to make sure they are proper!
or may check you build.prop file on the current rom to see if the asserted lines match those in updater-script
Did anyone had that kind of problem on MIUI 5 thread?
If no, then you doing something wrong.
If this ROM is made for XS, then it should work without editing any file (if should OP would said).
Re-download zip, check md5 or just flash other JB kernel then flash MIUI.
Sent from my LT26i using Tapatalk 2
---------- Post added at 09:50 AM ---------- Previous post was at 09:49 AM ----------
******
And please, write results.
You opened this thread and you should "close it".
Sent from my LT26i using Tapatalk 2
Nothing's working. If anyone can tell me how to convert a zip file to ftf then I can try flashing through Flashtool. I've also tried renaming the file from .zip to .ftf using Total Commander but Flashtool is giving error while preparing files. The only ROM that I've managed to flash successfully is this: http://forum.xda-developers.com/showthread.php?t=2102798 The one with build '6.1.A.2.55'
sirius_gamer said:
Nothing's working. If anyone can tell me how to convert a zip file to ftf then I can try flashing through Flashtool. I've also tried renaming the file from .zip to .ftf using Total Commander but Flashtool is giving error while preparing files. The only ROM that I've managed to flash successfully is this: http://forum.xda-developers.com/showthread.php?t=2102798 The one with build '6.1.A.2.55'
Click to expand...
Click to collapse
You cannot convert a zip into a ftf file. Only Sony can build .sin files
sirius_gamer said:
Nothing's working. If anyone can tell me how to convert a zip file to ftf then I can try flashing through Flashtool. I've also tried renaming the file from .zip to .ftf using Total Commander but Flashtool is giving error while preparing files. The only ROM that I've managed to flash successfully is this: http://forum.xda-developers.com/showthread.php?t=2102798 The one with build '6.1.A.2.55'
Click to expand...
Click to collapse
You can't do that, what could you do and I already said that.
Find different kernel and flash that or just extract boot.img and flash that via fast boot.
Command:
fastboot flash boot boot.img
Then flash ROM
Sent from my Xperia S using Tapatalk 2
funky0308 said:
You can't do that, what could you do and I already said that.
Find different kernel and flash that or just extract boot.img and flash that via fast boot.
Command:
fastboot flash boot boot.img
Then flash ROM
Sent from my Xperia S using Tapatalk 2
Click to expand...
Click to collapse
Problem solved! I was missing the step in which we have to flash boot.img Thanks alot bro :')
sirius_gamer said:
Problem solved! I was missing the step in which we have to flash boot.img Thanks alot bro :')
Click to expand...
Click to collapse
Sent from my Xperia S using Tapatalk 2
sirius_gamer said:
Hey guys I've an Xperia S. I've rooted it, installed CWM recovery on it, unlocked the bootloader, then wiped cache partition and dalvik cache and also the data but im getting this error everytime I try to install a custom ROM:
-- Installing: /sdcard/MIUIv5_3.3.29_nozomi.zip
Finding update package...
I:Update location: /sdcard/MIUIv5_3.3.29_nozomi.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "LT26i" || getprop("ro.build.product") == "LT26i" ||
getprop("ro.product.device") == "LT26ii" || getprop("ro.build.product") == "LT26ii" ||
getprop("ro.product.device") == "LT26" || getprop("ro.build.product") == "LT26" ||
getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi"
assert failed: getprop("ro.product.device") == "LT26i" || getprop("ro.build.product") == "LT26i" || getprop("ro.product.device") == "LT26ii" || getprop("ro.build.product") == "LT26ii" || getprop("ro.product.device") == "LT26" || getprop("ro.build.product") == "LT26" || getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi"
E:Error in /sdcard/MIUIv5_3.3.29_nozomi.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/MIUIv5_3.3.29_nozomi.zip")
Dont know whats this 'status 7' is. Please help! I've tried many ROMs many times but none working.
Click to expand...
Click to collapse
Hello,You need to upgrade you cwm recovery.Then try to flash ok!
tania247260 said:
Hello,You need to upgrade you cwm recovery.Then try to flash ok!
Click to expand...
Click to collapse
Thanks but the problem has been solved already
Sent from my Xperia S using Tapatalk 2
Hi, today I received the SE Xperia PRO, I successfully rooted the device using DooMLoRD_v4_ROOT. However, I am unable to install the CM 10 from the official CM website for this device, I keep getting this
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device")=="MK16i" || getprop("ro.build.product") == "MK16i" || getprop("ro.product.device") == "MK16a" || getprop("ro.build.product") == "iyokan" || getprop("ro.build.product") == "iyokan"E:error in /sdcard/FXP138-cm-10-20130811-NIGHTLY-iyokan.zip
(Status 7)
Pride4u said:
Hi, today I received the SE Xperia PRO, I successfully rooted the device using DooMLoRD_v4_ROOT. However, I am unable to install the CM 10 from the official CM website for this device, I keep getting this
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device")=="MK16i" || getprop("ro.build.product") == "MK16i" || getprop("ro.product.device") == "MK16a" || getprop("ro.build.product") == "iyokan" || getprop("ro.build.product") == "iyokan"E:error in /sdcard/FXP138-cm-10-20130811-NIGHTLY-iyokan.zip
(Status 7)
Click to expand...
Click to collapse
Did you flash the kernel in the ROM zip?
僕のLT18iから送られてきた
Nope, I'll try that and see if it helps.
UPDATE:
Thanks, the installation works now.
Hi,
I'm trying to install PAC-MAN ROM on my mobile but i'm a little bit lost with build versions m7, m7att, m7spr, m7tmo, m7ul, m7vzw, m7wls. On my mobile informations with adb ro build project is :
ro.build.project=M7_UL_JB43_SENSE55_MR:338159
So i took the m7ul version. Wipe data/factory reset is okay bit when i flashing, I have an assert failed when he check two properties at the installation. But if i seach this two properties on my mobile information, they seem correct :
It fails at: assert(getprop("ro.product.device") == "m7" || getprop("ro.build.product") == "m7" ||
getprop("ro.product.device") == "m7ul" || getprop("ro.build.product") == "m7ul");
ro.product.device=m7
ro.build.product=m7
I don't know why it dosen't work.
ClockworkMod recovery v6.0.4.6
HBOOT-1.55.000
Here is a solution (sorry but i haven't 10 posts, i can't write an url on my question): androidgadgematic. com/2012/12/fix-custom-rom-installation-status-7.html
But before i want be sure that i must use m7ul version.
This is the HTC one X forum....not the ONE forum !!!