Hello
I have configured my S3 to connect whit IPsec xauth PSK on the onboard VPN Client to connect to the Workplace. It says it be connected but it didnt work. Dont know whats wrong. I also have tried the vpnCilla Client, but that works verry well. So whats matter?
Thanks
Related
Hi, is it possible to connect the BA, via WIFI (P2P connection), to a PC with a WIFI card and use the PC's internet connection tu surf the web?
I tried: I can make the BA get the signal, but when I try to connect to a website it doesn't work.
Thank you in advance.
Bye.
fabbor75
I don't think its possible to do this directly using a P2P WIFI connection, but if you can get activesync to work over a P2P WIFI connection, it might work. I know is I use activesync over a USB connection & I can surf the net all day, so I'm thinking it might be possible to use the same approach over wifi.
Thing is I don't know if its possible to use activsync over P2P wifi
Solution
The problem is that windows not chain the IP Adrress of PC and Pocket bacause Nat not work under Xp basic system.
It's possible however to install a third party software to route packet from Pc to pocket i think all NAT's program can do that!!!!
Find one and Good Luck.
With WM2003SE i've used WINROUTE
Maybe?
Hi fabbor75!
Maybe your problem isn't the connection to the PC, it's maybe the DNS-resolution. Check your TCP/IP-settings on your BA, the important thing ar the DNS-Server.
The badest thing you must do is that you have to configure all TCP/IP setting manually: IP-Address, Subnetmask, Gateway and DNS-Server.
But you have to configure EXTERNAL DNS-Server on your BA, this one you got from your internet-provider, not the PC to which your BA is connected P2P. And the Gateway is the IP-Adress of your WiFi-card which is built-in in your PC.
Maybe this helps you.
Greetings, Peter
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
Hi I have m700 with a wifi connection and an olde laptop with no wifi, I have upgraded it with vista (My laptop) and can connect the pda via WMDC, and also have modem link in schap's wm6 rom. is there software or a possible way to use my m700's wifi connection through usb on laptop, then use the laptops internet like wifi card/adaptor? any help appreciated. v
http://msmobiles.com/news.php/6999.html
Rudegar said:
http://msmobiles.com/news.php/6999.html
Click to expand...
Click to collapse
I have tried this already, this just routes ad-hoc (computer to Computer) wifi connection, the wifi I connect to is infrastructure. I need to use the wifi in my pda and somehow to use it through the usb port into my vista laptop, like as a wireless receiver or using the pdas wifi whilst its connected. thanks for that route, but been there, unless i'm missing something. please let me know if so. thanks
I see what your trying to do but im not sure you can do that,
I havnt tested it but i would try this:
you could give your PC a static IP and find the PDA's IP when its connected to your laptop via USB, then enter
Attach your PDA to a WiFi network and find its IP, then connect your laptop to the PDA via USB, then give your laptop a static IP in the same subnet as the PDA and give one of the DNS servers as the PDA's IP and the other as the DNS server thAt the PDA has picked up from the WiFi network.
Make sure IE is set to 'automaticlly detect proxy setting'. In my head this should work but i have found what i think and what can actuly happen is VERY different.
Let me know how it gets on or at least post the outcome.
Thank you
jab1a said:
I see what your trying to do but im not sure you can do that,
I havnt tested it but i would try this:
you could give your PC a static IP and find the PDA's IP when its connected to your laptop via USB, then enter
Attach your PDA to a WiFi network and find its IP, then connect your laptop to the PDA via USB, then give your laptop a static IP in the same subnet as the PDA and give one of the DNS servers as the PDA's IP and the other as the DNS server thAt the PDA has picked up from the WiFi network.
Make sure IE is set to 'automaticlly detect proxy setting'. In my head this should work but i have found what i think and what can actuly happen is VERY different.
Let me know how it gets on or at least post the outcome.
Thank you
Click to expand...
Click to collapse
WOW! you know ur stuff, but i wouldn't know the first thing about the info you gave me. do a dummies guide and i'll try it. cheers for the info tho.
Hmm, dunno if that would work - no harm in trying though..
If you connect via usb then it will setup from the activsync and the dhcp within it, normally along the lines of 169.254.2.2 - but you would have to use this subnet to switch the laptop too (don't use 1 as that will most probs be the dhcp svr) in order to communicate with the device and this is where I see the problem.
You would only be connecting to the device, u can not use the wireless subnet as you have no connection to this just the pda, so if you set your laptop to the subnet of the wifi by rights the network should just look at you blankly as it will not be able to see past the activsync connection to get to the wifi subnet.
Or at least that's how I'd see it happening.
I think i'll just buy a wireless receiver. lol. haven't got a clue what you are both telling me. thanks anyway. maybe somebody can create a cab with settings if poss, or a program?
would there not be a hack or reg change, which in the wifi-router download at start of thread, which will add or change the ad-hoc connection to infrastructure instead? or would this be impossible? thanks
btw: you a running vista on a laptop which is so old that it doesn't have wifi???
i think you should go for a wifistick (~ 10-15 €?!?)
I'm using CM9 on my galaxy nexus.
I can connect to my PPTP VPN server (my router running tomato) fine without tunneling, both inside my lan, and outside it.
I can connect to my SSH server (again my router), both inside my lan and outside it. And have successfuly forwarded ports before w/ connect bot and remote desktop apps.
But everything I try results in my VPN connection timing out when I try to do it over the SSH tunnel. I have it connecting to localhost on the VPN settings side. And on the connect bot side i am forwarding port 1723 to 192.168.1.1:1723 (which is my routers lan IP).... but it still times out.
Does anyone have any ideas? is this even possible?
bump - so no one has tried to do this?
edit: nevermind, not possible with PPTP http://www.webhostingtalk.com/showthread.php?t=666728
PPTP requires the GRE protocol, which you can't tunnel over SSH. I've googled this extensively and have tried it repeatedly without any success. You could do PPP over SSH, but it's not very easy to set up, and depending on what OSes you're running, it might be out of your reach.
Check out OpenVPN; it runs on both Windows and Linux, uses a single configurable port for communications, and does everything over that port; as long as you can find an unblocked port on your network to use it on, you should be fine.
Click to expand...
Click to collapse
Hello everyone,
as noted in the title of this thread, I cannot connect to L2TP/IPSec VPN Server from my phone (Redmi Note 8 Pro, running MIUI 11.0.3 stock).
I've done extensive troubleshooting and appears that phone never even contacts the server. When i configure everything and toggle the VPN, it will try to connect but never does, and then times out.
I'm watching the logs on the server, nothing appears.
I'm watching tcpdump on the server, no packet is even received from phone.
I've connected to WiFi network from i which i know i can connect to VPN (for example from PC or my MikroTik router) and it cannot even connect from that network.
I've enabled packet sniffer on root MikroTik router to sniff the packets, filtering MAC address of my phone, and guess what... When i click on VPN, it doesn't even try to connect to VPN serever. VPN server IP address doesn't even appear on sniff.
I'm wondering why is this happening, is anyone else having issues with L2TP/IPSec VPN? How do i inform Xiaomi of this issue since I've placed couple of feedbacks back in the day, never received an answer and those issues still persists so i don't even thing they are reading the feedback that is sent to them from phone app.
Hoping to get to the bottom of this!
Any help would be greatly appreciated !
Any chance you can try the OpenVPN app? I used to have an issue with my old phone where sometimes it would say connected but it wouldn't be. With the rn8pro, OpenVPN works every time.
Edit: try posting on the Mi forums for a better chance of a response from someone at Xiaomi
https://c.mi.com/global/forum-2234-1.html
Might not just be Xiaomi....https://github.com/SoftEtherVPN/SoftEtherVPN/issues/571
I would hate having two VPN servers installed at the same time. There are times when i want to connect my root mikrotik router to VPN server i question to forward all web traffic via VPN, unfortunately, OpenVPN support is very limited on MikroTik , there are new cipher suites missing and with new OpenVPN servers in place it's impossible to connect tik to OpenVPN.
I know however that OpenVPN app works great with android, but it's weird that native L2TP doesn't seem to be working at all.
I could fall back to PPTP maybe. Both Android and MikroTik works flawlessly with PPTP. But... It's PPTP..
Thanks, i will try posting to Xiaomi forums as well.