Develop Bugs

ROOT - Sony Xperia S - 6.1.A.2.55 - Locked BL

Hi xda developers and users!
ROOT - Sony Xperia S - 6.1.A.2.55 - LOCKED BOOTLADER
To root this mobile phone you need:
- Flashtool // http://xdafileserver.nl/index.php?dir=Sony+(Ericsson)/SE+Xperia+S+(LT26i)/TOOLS/Flashtool
- LT26i_6.0.A.3.75_Generic NL.ftf // http://xdafileserver.nl/index.php? dir=Sony+%28Ericsson%29%2FSE+Xperia+S+%28LT26i%29%2FSTOCK+ROMS%2FGB
- Root tool from Bin4ry // http://uploaded.net/file/0fpyh5c5
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. download this three things
2. install flashtool
3. unzip the stock rom firmware and copy the .ftf file to your flashtool directory with the firmwares (standard: C:\Flashtool\firmwares)
4. plug in your phone to the computer and the phone and make sure usb debugging is on
5. open up flashtool and click on the lightning icon and chose flashmode
6. chose the firmware 6.0.A.3.75 and let all the settings by wipe,exclude and misc the same [WARNING IT WILL DELETE ALL YOUR PHONE DATA SO IF YOU HAVE SOME THING IMPORTANT THERE BACKUP IT ON THE PC]
7. follow the flashtool instructions(note: instead of pressing the "back button" you must press and hold the "volume down button")
8. after this you have gingerbread on your mobile phone then let your xperia s turned on and wait till a update information appears to 6.1.A.0.452
9. after the update pllug in your phone again and unzip the root tool then open up RunME.bat
10. chose normal mode and wait till it asks you to restore your data
11. to do this you have to go to the app backup & resore app
12. chose rootme and restore it
13. then wait till the root this said that the rooting is done
14. now unplug your phone turn it on and download a root checker to proof your root access

Don't post it here if you didn't create it.
Sent from my Xperia Acro S using Tapatalk 2

dominik07 said:
Hi xda developers and users!
ROOT - Sony Xperia S - 6.1.A.2.55 - LOCKED BOOTLADER
To root this mobile phone you need:
- Flashtool // http://xdafileserver.nl/index.php?dir=Sony+(Ericsson)/SE+Xperia+S+(LT26i)/TOOLS/Flashtool
- LT26i_6.0.A.3.75_Generic NL.ftf // http://xdafileserver.nl/index.php? dir=Sony+%28Ericsson%29%2FSE+Xperia+S+%28LT26i%29%2FSTOCK+ROMS%2FGB
- Root tool from Bin4ry // http://uploaded.net/file/0fpyh5c5
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. download this three things
2. install flashtool
3. unzip the stock rom firmware and copy the .ftf file to your flashtool directory with the firmwares (standard: C:\Flashtool\firmwares)
4. plug in your phone to the computer and the phone and make sure usb debugging is on
5. open up flashtool and click on the lightning icon and chose flashmode
6. chose the firmware 6.0.A.3.75 and let all the settings by wipe,exclude and misc the same [WARNING IT WILL DELETE ALL YOUR PHONE DATA SO IF YOU HAVE SOME THING IMPORTANT THERE BACKUP IT ON THE PC]
7. follow the flashtool instructions(note: instead of pressing the "back button" you must press and hold the "volume down button")
8. after this you have gingerbread on your mobile phone then let your xperia s turned on and wait till a update information appears to 6.1.A.0.452
9. after the update pllug in your phone again and unzip the root tool then open up RunME.bat
10. chose normal mode and wait till it asks you to restore your data
11. to do this you have to go to the app backup & resore app
12. chose rootme and restore it
13. then wait till the root this said that the rooting is done
14. now unplug your phone turn it on and download a root checker to proof your root access
Click to expand...
Click to collapse
So at what point exactly do you install 6.1.A.2.55? All I see is that you end up with 0.452 and you can easily find several rooted versions of that.

You noobs do you even read the forum rules and other post before posting?? idiots.

auni said:
You noobs do you even read the forum rules and other post before posting?? idiots.
Click to expand...
Click to collapse
You could be nicer to/go easier on a noob. Not everybody was born knowing everything
His thread will be moved with or without your unkind remarks.

8. after this you have gingerbread on your mobile phone then let your xperia s turned on and wait till a update information appears to 6.1.A.0.452
Click to expand...
Click to collapse
It appears the update now 6.1.A.2.55 but it is not possible to root it?

Build Version: 6.1.A.2.55
Phone: Xperia SL
Question:
Can I use Xperia S process to root and unlock my Xperia SL?

iTTi said:
Build Version: 6.1.A.2.55
Phone: Xperia SL
Question:
Can I use Xperia S process to root and unlock my Xperia SL?
Click to expand...
Click to collapse
You can use Xperia S methods but you better use this thread for Xperia SL: http://forum.xda-developers.com/showthread.php?t=2245327
[Index] Xperia SL
Because the method posted in this thread is not actually a rooting method for 2.55 firmware.
Sent from my LT26i using xda app-developers app

OFFICIAL UPDATED Flashtool 0.9.13.0 for ALL XPERIA (Windows)

Latest Flashtool 0.9.13.0 for ALL XPERIA (Windows)
Windows Edition - v0.9.11.0 - MD5 : A0F880F3CF420A31D86026F49A2013D7
Updated on 12/06/2013 ©2011 by Androxyde
More information at http://androxyde.github.com/
Flashtool Release Notes:
* 0.9.13
This version is a big split with every previous ones.
And not fully featured as previous can be.
I changed the UI framework from Swing to SWT because of a better integration with Mac UI.
Here is what is missing from previous releases :
- No multilingual UI
- No recovery installer
- No kernel installer (for 2010 devices)
- No ROM cleaner.
- Cannot Add/Edit/Remove devices.
No TA hex editor (in pro mode)
Version fully compatible with all 2013 devices (Z1/Z Ultra/Tablet Z etc etc)
Unified Bootloader unlock feature with the new BLU icon. No more unlock plugin.
As for flashing, BLU is available even without any connected device, even with
unrecognized devices.
Updated SuperSU package. Added servicemnu root hack
(works with Z1/Z Ultra)
Known working for Xperia T/V too
Added TA partition backup/restore. Using this feature, you can backup TA before unlock.
Restore TA will relock the devicee and get DRM back as well as BE2
(full complete relock). You cannot count on this feature if ever your device is
already unlocked. Missuse of this feature can brick the device
Introduction to Flashtool:
Flashtool is a flashing software that can be used to :
1. Flash original Images (Android 1.6, 2.1, 2.3 Images)
2. Root your phone
3. Install Recovery, Busybox, custom kernels
4. Clean your Rom (remove /system/apps apps of your choice)
(Be careful, unless you really know what you do, do not modify the default list.
This can make your phone stuck at the SE Logo)
5. Clear dalvik cache
6. Optimize (install of JIT v2)
(Disabled in 0.4, will readd it as a plugin for 2.1 phones only)
7. Customize (installs apps found in the custom/apps folder of the flashtool)
8. Clean uninstalled (remove any references to system apps removed in the
Clean (root needed) step)
9. Edit any text file on the device
10. Rebrand your device
Download Link
https://mega.co.nz/#!d4lx1bZQ!Ltt8Bw...Rvh0Z2ZMl-kCn0
Thanks for mirror @marco.it
FAQ.
Q : Can Flashtool unlock bootloader for a first time unlock ?
A : Yes, it does it using official sony method (get key, then issue the right fastboot command)
Q : Can Flashtool relock bootloader ?
A : Yes
Q : Can Flashtool unlock bootloader after a relock ?
A : Yes.
With this release, before unlocking first time, root your device and you will be able to backup your TA partition (Raw ta backup). By doing this, you will be able to relock / restore your TA partition and have back BE2 and all DRM keys.
Happy flashing
HIT THANKS BUTTON IF IT HELPED

majeed619 said:
Latest Flashtool 0.9.11.0 for ALL XPERIA (Windows)
Windows Edition - v0.9.11.0 - MD5 : A0F880F3CF420A31D86026F49A2013D7
Updated on 12/06/2013 ©2011 by Androxyde
More information at http://androxyde.github.com/
Flashtool Release Notes:
* 0.9.11
This version is a big split with every previous ones.
And not fully featured as previous can be.
I changed the UI framework from Swing to SWT because of a better integration with Mac UI.
Here is what is missing from previous releases :
- No multilingual UI
- No recovery installer
- No kernel installer (for 2010 devices)
- No ROM cleaner.
- Cannot Add/Edit/Remove devices.
No TA hex editor (in pro mode)
Version fully compatible with all 2013 devices (Z/ZL/Tablet Z etc etc)
Unified Bootloader unlock feature with the new BLU icon. No more unlock plugin.
As for flashing, BLU is available even without any connected device, even with
unrecognized devices.
Updated SuperSU package. Added servicemnu root hack
(works with Z/ZL for all FW up to .434)
Known working for Xperia T/V too
Added TA partition backup/restore. Using this feature, you can backup TA before unlock.
Restore TA will relock the devicee and get DRM back as well as BE2
(full complete relock). You cannot count on this feature if ever your device is
already unlocked. Missuse of this feature can brick the device
Introduction to Flashtool:
Flashtool is a flashing software that can be used to :
1. Flash original Images (Android 1.6, 2.1, 2.3 Images)
2. Root your phone
3. Install Recovery, Busybox, custom kernels
4. Clean your Rom (remove /system/apps apps of your choice)
(Be careful, unless you really know what you do, do not modify the default list.
This can make your phone stuck at the SE Logo)
5. Clear dalvik cache
6. Optimize (install of JIT v2)
(Disabled in 0.4, will readd it as a plugin for 2.1 phones only)
7. Customize (installs apps found in the custom/apps folder of the flashtool)
8. Clean uninstalled (remove any references to system apps removed in the
Clean (root needed) step)
9. Edit any text file on the device
10. Rebrand your device
Download Link
http://sdrv.ms/ZJN81O
HIT THANKS BUTTON IF IT HELPED
Click to expand...
Click to collapse
THANK YOU! Every link I was finding was around a 45 min download!

thanks for the link.. i hope that i finally can unbrick my ZQ -.- he's stucked in Sony logo

http://postimg.org/image/jnx079uwd/
I have problem downloading flashtool driver of xperia arc s
As you can see I attached picture.

Bassheadzero said:
thanks for the link.. i hope that i finally can unbrick my ZQ -.- he's stucked in Sony logo
Click to expand...
Click to collapse
Just simply flash the compatible ftf file for your device using flashtool
Your phone will be fine I faced the same issue few weeks back

sanjulgupta said:
Just simply flash the compatible ftf file for your device using flashtool
Your phone will be fine I faced the same issue few weeks back
Click to expand...
Click to collapse
Oh many thanks mate, I already get solved this problem flashing a ftf fw!
Cherrs!

This may be a dumb question, but I'll ask it anyways.
I have an Xperia ZL that was purchased from bell. I know it has a locked bootloader that cannot be unlocked through the official Sony tool, so i'm wondering if it can be unlocked with this flashtool?
If so that would be awesome.
If not, I'll be supremely unimpressed with Sony.
Sent from my C6506 using xda premium

Folder is empty! Kindly re-upload.

I agree

Folder is empty

Hey guys, after some serious digging, I found it here. http://www.flashtool.net/download.html

-NM

stevessvt said:
Hey guys, after some serious digging, I found it here. http://www.flashtool.net/download.html
Click to expand...
Click to collapse
not a valid windows 32 application.

alex4659 said:
not a valid windows 32 application.
Click to expand...
Click to collapse
Really? Did you try this version of it?
Windows Edition : v0.9.11.0 – MD5 : A0F880F3CF420A31D86026F49A2013D7
It worked just fine for me and several others.

Folder is empty , Kindly reupload and update the links

stevessvt said:
Really? Did you try this version of it?
Windows Edition : v0.9.11.0 – MD5 : A0F880F3CF420A31D86026F49A2013D7
It worked just fine for me and several others.
Click to expand...
Click to collapse
yes i did.
im using parallels desk top for mac so im downloading it for my macbook pro as well.
you dont by chance have a direct link to a ftf to a pre rooted firmware (i think gingerbread) for the xperia x10s do you?
thanks again,
Alex
---------- Post added at 08:47 PM ---------- Previous post was at 08:39 PM ----------
this is what i get when i try to flash the kernel-4.3-v21.ftf:
Note, my phone is stuck at the sony ericsson screen
27/044/2013 20:44:23 - INFO - <- This level is successfully initialized
27/044/2013 20:44:23 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
27/044/2013 20:44:23 - INFO - libusb version 1.0.15
27/044/2013 20:44:27 - INFO - Device disconnected
27/044/2013 20:44:39 - INFO - Selected es209ra / 21 / 4.3.X
27/044/2013 20:44:39 - INFO - Preparing files for flashing
27/044/2013 20:44:39 - INFO - Please connect your device into flashmode.
27/044/2013 20:44:49 - INFO - Device connected in flash mode
27/044/2013 20:44:50 - INFO - Opening device for R/W
27/044/2013 20:44:50 - INFO - Device connected in flash mode
27/044/2013 20:44:50 - INFO - Device ready for R/W.
27/044/2013 20:44:50 - INFO - Reading device information
27/044/2013 20:44:50 - INFO - Phone ready for flashmode operations.
27/044/2013 20:44:51 - INFO - Current device : X10i - CB511PDEG8 - 1241-1846_R1C - 1227-4612_3.0.1.G.0.75 - WORLD-1-4-8_3.0.1.G.0.75
27/044/2013 20:44:51 - INFO - Start Flashing
27/044/2013 20:44:51 - INFO - Processing loader
27/044/2013 20:44:51 - INFO - Checking header
27/044/2013 20:44:51 - INFO - Ending flash session
27/044/2013 20:44:51 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
27/044/2013 20:44:51 - ERROR - Error flashing. Aborted
27/044/2013 20:44:51 - INFO - Device connected in flash mode
27/044/2013 20:44:53 - INFO - Device disconnected
27/044/2013 20:44:55 - INFO - Device connected in flash mode
27/044/2013 20:44:59 - INFO - Device disconnected
---------- Post added at 08:47 PM ---------- Previous post was at 08:47 PM ----------
SnakeEyesNinja said:
Folder is empty , Kindly reupload and update the links
Click to expand...
Click to collapse
dito

Mega.co.nz mirror:
https://mega.co.nz/#!d4lx1bZQ!Ltt8BwMnkRTWPUNzZDwZ7AzIDaEGLRvh0Z2ZMl-kCn0

with this version of Flash tool i'm not seeing a xperia ion option. Is there another phone that is identical to mine within those options?

montrese04 said:
with this version of Flash tool i'm not seeing a xperia ion option. Is there another phone that is identical to mine within those options?
Click to expand...
Click to collapse
HOPE IT WORKS :good:
http://forum.xda-developers.com/showthread.php?t=1812168

ERROR SIN verification failed
I have a question about flashtool 0.9.13.0:
What does mean 'SIN verification failed'? Is there a problem in the ftf file itself, in the configuration of flashtool or between ftf file and phone (baseband, bootloader, etc)?
Thanks for any hints,
Alexej

[SO-01F][4.2] root / update for SO-01F 14.1.H.1.281 / 14.1.H.2.119 NTT docomo

This is the guide for SO-01F users to root and update for 4.2 14.1.H.1.281
If you are C69xx user, please exclude partition and ta when you flash docomo FTF.
[EDIT]
FTF for Japanese Xperia will be hosted in this website:
http://ftf.xn--l8je9byecb9a3syb.xn--q9jyb4c/
Requirements:
Flashtool 0.9.14 by @Androxyde (Japanese translated version is here)
ADB setup (Search how-to)
Downloads:
SO-01F_14.1.H.1.281_NTT docomo.ftf
any C6903 14.1.G.1.534 generic ftf
XZU & Z1 recovery v4 Windows
rootkitXperia
Flashtool
cwm_prerooted_Z1.zip
XZDualRecovery (Z1-lockeddualrecovery2.7.*-BETA.installer.zip)
Instruction for 14.1.H.1.281
1. Enter into flashmode and flash 14.1.G.1.534 ftf
Wipe: Check all
Exclude: Check all but uncheck kernel and system
!! This will format internal storage !!
2. Boot and enable USB debugging and Unknown source
(Search how to enable if you don't know)
3. Run rootkitXperia
4. Run XZU & Z1 recovery v4 Windows
5. Copy cwm_prerooted_Z1.zip to Z1's storage
6. Reboot and enter into recovery by pressing volume up and install cwm_prerooted_Z1.zip
7. Power off after completed
8. Enter into flashmode and flash 14.1.H.1.281 ftf
Wipe: Check all
Exclude: Check all but uncheck kernel
9. Install XZDualRecovery
10. Done!
Instruction for 14.1.H.2.119
Posted here
FTF and root tool link for 14.3.B.0.288
Posted here
How to create prerooted zip by yourself
Requirements:
7-Zip Command Line Version
cwm_prerooted_Z1.zip (template zip)
FTF to update
1. Put 7za.exe, ftf and template zip in same folder
2. Open command window by Shift + Right click -> "Open Command Window Here"
3. Type and run one by one:
Code:
7za e (name).ftf system.sin
7za e (name).ftf kernel.sin
This will extract two sin files from FTF.
4. Open Flashtool, then select tools -> Sin editor
5. Browse and select system.sin, then click "Extract data"
6. Browse and select kernel.sin, then click "Extract data"
7. In command window type and run:
Code:
7za a -tzip cwm_prerooted_Z1.zip system.ext4
7za a -tzip cwm_prerooted_Z1.zip kernel.elf
8. Done, you can now copy cwm_prerooted_Z1.zip to internal storage and install it with recovery.
You have to flash rpm.sin with Flashtool after installation.
Enter into flashmode and flash ftf
Wipe: Don't check
Exclude: Check all but uncheck kernel
Thanks @cubeundcube for rootkitXperia and @hagurekamome for template!

Our warmest thanks, I did. Now wait for 4.4.2 update again is amazing.

The operator DoCoMo has an update on 14.1.H.2.119, I have upgraded and lost root ...
Can you help me root it?

SO-01F_14.1.H.2.119_NTT docomo.ftf
https://mega.co.nz/#!rkRTXZ4b!fcb2j3UuNt10qQ_jxW6_gQk0w7t9hNV7QlK0pNTOGcg
4.4 for SO-01F will be released after docomo starts selling Z2 (Maybe in May).
p950q said:
The operator DoCoMo has an update on 14.1.H.2.119, I have upgraded and lost root ...
Can you help me root it?
Click to expand...
Click to collapse
Replace OP's cwm_prerooted_Z1.zip with updated one:
https://mega.co.nz/#!y1IQVLxJ!fgV97jd8xCIPh5BMPy8mIgvJwc5UhmjRBvKNqib8e3o
1. - 4. is same as instruction for .681
If you already have rooted .681, you can skip 1. - 4. and go to 5.
5. Copy cwm_prerooted_Z1_119.zip to Z1's storage
6. Reboot and enter into recovery and install cwm_prerooted_Z1_119.zip
7. Power off after completed
8. Enter into flashmode and flash 14.1.H.2.119 ftf
Wipe: Check all (recommended, but you can uncheck all to save your data)
Exclude: Check all but uncheck kernel
9. Install XZDualRecovery
10. Done!

When I try to flash the Kernel on last step
"8. Enter into flashmode and flash 14.1.H.2.119 ftf
Wipe: Check all (recommended, but you can uncheck all to save your data)
Exclude: Check all but uncheck kernel"
I get an error and did not flash it. Mine is a C6903, all other steps go fine, the last one is the only one having problem.
Any help?
Thank you!
Edit:
Error:
03/047/2014 15:47:26 - INFO - Flashing data
03/047/2014 15:47:48 - ERROR - Processing of userdata.sin finished with errors.
03/047/2014 15:47:48 - INFO - Ending flash session
03/047/2014 15:47:48 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x801E0002 ";
Thank you!

SO-01F_14.1.H.2.119_Docomo_Deodex_Shell .zip 454.8 MB - deodex pack for recovery
SO-01F_14.1.H.2.119_Docomo.flashable_v1.0.zip 917.0 MB - flashable zip odex rom with root and recovery

Pleases upload file ROM of SO-01F 14.1.H.0.542 here.
@: Alreded Search: It here; http://pan.baidu.com/wap/link?uk=2704250164&shareid=2755975911&third=0

I did it. I again thank the RyokoN.
I wish everyone good luck and success.

Are you guys running it?
I'm not being able to make it work.
I get stock on first screen, it shows the micro sim card place.
Any help?
Thank you!
Alway this :
04/041/2014 11:41:34 - INFO - Checking header
04/041/2014 11:41:34 - INFO - Flashing data
04/041/2014 11:41:46 - ERROR - Processing of userdata.sin finished with errors.
04/041/2014 11:41:46 - INFO - Ending flash session
04/041/2014 11:41:46 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x801E0002 ";
Edited:
I get it working, just unchecked Wipe: DATA.
Thank you.

Let's do it slowly and step by step you can see wrong somewhere ...?

Desperanto86 said:
SO-01F_14.1.H.2.119_Docomo_Deodex_Shell .zip 454.8 MB - deodex pack for recovery
SO-01F_14.1.H.2.119_Docomo.flashable_v1.0.zip 917.0 MB - flashable zip odex rom with root and recovery
Click to expand...
Click to collapse
Please give specific information and guidance are not you?
---------- Post added at 10:57 AM ---------- Previous post was at 10:32 AM ----------
Now just wait for Android 4.4 version of the network's Root KyokoN Docomo and left.

docomo announced their presentation will be held on May 14 (in Japan).
https://www.nttdocomo.co.jp/product...x.html?cid=CRP_PRD_sns_tw_2014_summer_feature
They will announce Xperia Z2 (SO-03F), A2 (SO-04F) and Z2 Tablet (SO-05F).
docomo's Z got update to 4.2 nine days before Z1 (4.2) is launched.
Z1 should get 4.4 soon before/after SO-03F is released, but docomo is still developing 4.4.
They even writes "OS: Android 4.4 (Under investigation)" in their catalog...
http://i.imgur.com/EDZ9HEf.jpg

can anyone anyone upload the kitkat version for SO-01F.. since I cannot update on wifi connection.. thanks
...
Got it updated using Update Service for sony

I finally got 4.4.2 for my DoCoMo z1. I got It from an ota update. It seems pretty good so far, but there seem to be a lot of wakelocks.

Hello! Has anyone here tried any custom roms on their SO-01F? Just curious if anyone has tried or not. I was rooted previously and noticed there was an OTA so I reflashed the Docomo ftf .119 and upgraded my phone with the OTA. Then I re-rooted and installed ,multi recovery.

@RyokoN: you have updated and root android 4.4.2 version from the docomo network yet?
two members on getting it there.

p950q said:
@RyokoN: you have updated and root android 4.4.2 version from the docomo network yet?
two members on getting it there.
Click to expand...
Click to collapse
Actually I sold my Z1 to get Z2, but here is the ftf for 4.4.2 update:
SO-01F_14.3.B.0.288_docomo.ftf
https://mega.co.nz/#!f4p3AKJb!GChIx9uPqnW5At8ueZrxKnECVVOCI8k6cGZqNBHc-Pc
https://drive.google.com/file/d/0B4fBjQuS8IxPbUtZNzdMZDZuWDQ/edit?usp=sharing
https://s.basketbuild.com/filedl/devs?dev=AndroPlus&dl=AndroPlus/SO-01F_14.3.B.0.288_docomo.ftf
SO-02F_14.3.B.0.288_docomo.ftf
https://mega.co.nz/#!P4RFwRbI!Kk7fi0MEO7z0OYySpXfhxn4T65kkZJVnq78pC74NYhg
https://drive.google.com/file/d/0B4fBjQuS8IxPT1hObkZHLVI2cDg/edit?usp=sharing
https://s.basketbuild.com/filedl/devs?dev=AndroPlus&dl=AndroPlus/SO-02F_14.3.B.0.288_docomo.ftf
You can use Towelroot exploit to root .288.
http://forum.xda-developers.com/showthread.php?t=2784900
How to disable sony_ric to mount system as RW:
1. Download ric_disable pack
https://mega.co.nz/#!mp5jyDKa!l13Rm8r3bspzmhwtWmChXZf0MlWJkfKsHI9Nh2p4l_Q
https://drive.google.com/file/d/0B4fBjQuS8IxPVmgyajFyRFlvdnM/edit?usp=sharing
2. If you have recovery installed in your system, install "sony_ric_disabler_signed.zip".
If you don't have recovery or "sony_ric_disabler_signed.zip" doesn't work for you,
run these commands in command prompt:
Code:
adb push writekmem /data/local/tmp
adb push findricaddr /data/local/tmp
adb shell
chmod 0755 writekmem
chmod 0755 findricaddr
su
/data/local/tmp/findricaddr | /data/local/tmp/busybox tail -n2 | /data/local/tmp/busybox head -n1 | /data/local/tmp/busybox cut -d= -f2 > /data/local/tmp/ricaddr
chmod 777 /data/local/tmp/ricaddr
/data/local/tmp/writekmem `/data/local/tmp/busybox cat /data/local/tmp/ricaddr` 0
3. Run this command to mount system as RW:
Code:
mount -o remount,rw /system
4. Done!
If "sony_ric_disabler_signed.zip" doesn't work, you have to run these commands at every boot (for example, by Tasker "Run Shell" at "Device Boot").
Code:
su
/data/local/tmp/findricaddr | /data/local/tmp/busybox tail -n2 | /data/local/tmp/busybox head -n1 | /data/local/tmp/busybox cut -d= -f2 > /data/local/tmp/ricaddr
chmod 777 /data/local/tmp/ricaddr
/data/local/tmp/writekmem `/data/local/tmp/busybox cat /data/local/tmp/ricaddr` 0

RyokoN said:
Actually I sold my Z1 to get Z2, but here is the ftf for 4.4.2 update:
SO-01F_14.3.B.0.288_docomo.ftf
https://mega.co.nz/#!f4p3AKJb!GChIx9uPqnW5At8ueZrxKnECVVOCI8k6cGZqNBHc-Pc
https://drive.google.com/file/d/0B4fBjQuS8IxPbUtZNzdMZDZuWDQ/edit?usp=sharing
SO-02F_14.3.B.0.288_docomo.ftf
https://mega.co.nz/#!P4RFwRbI!Kk7fi0MEO7z0OYySpXfhxn4T65kkZJVnq78pC74NYhg
https://drive.google.com/file/d/0B4fBjQuS8IxPT1hObkZHLVI2cDg/edit?usp=sharing
You can use Towelroot exploit to root .288.
http://forum.xda-developers.com/showthread.php?t=2784900
Click to expand...
Click to collapse
Hi.. did you try rooting Z1 before selling it? tried steps to root it but not working for kitkat.. thanks

Rolandml said:
Hi.. did you try rooting Z1 before selling it? tried steps to root it but not working for kitkat.. thanks
Click to expand...
Click to collapse
No, I didn't test but other user reported it's working.
EasyRootTool v8 has a problem to check MD5 of tr.apk, so you have to find older tr.apk or ask dev to support new tr.apk.

RyokoN said:
No, I didn't test but other user reported it's working.
EasyRootTool v8 has a problem to check MD5 of tr.apk, so you have to find older tr.apk or ask dev to support new tr.apk.
Click to expand...
Click to collapse
thanks I will just try to downgrade rom and try some generic rom

[GUIDE][FAQ][KK] How to Root, Boot Unlock & More

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
FAQ
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
MOTOROLA PATCHED THE FAKEID, FUTEX & TRUST ZONE EXPLOITS ON THE 182/183.46.15 RAZR M FIRMWARE & THE .10 MOTO LUGE FIRMWARE.
AS OF NOW, THERE IS NO KNOWN BOOTLOADER UNLOCK EXPLOIT FOR THE 182 / 183.46.15 RAZR M FIRMWARE OR THE .10 MOTO LUGE FIRMWARE.
----------------------------------------------------------------------------------
IMPORTANT
----------------------------------------------------------------------------------
If your device is on stock Jelly Bean 4.1.2 firmware, you have the JB Bootloader (JBBL) - If your device is on stock KitKat 4.4.2 firmware, you have the KK Bootloader (KKBL)
Once your bootloader is unlocked, it can not be re-locked - Say goodbye to any warranties you may have.
Once your bootloader is unlocked, you can accept any and all firmware updates.
Once your bootloader is unlocked, you can flash any and all Razr M / Moto Luge firmware.
In order to receive and install System Updates you will need to be using 100% stock untouched firmware. (Stock system & recovery)
You can not downgrade with a locked bootloader. You can only flash current or updated firmware.
-----------------------------------------------------------------------------------
UNLOCKING THE BOOTLOADER ALLOWS YOU TO
-----------------------------------------------------------------------------------
Use a custom recovery and make NANDroid back-ups.
Root your device by flashing Superuser through a custom recovery. - No exploits needed
Deodexed your system and use custom themes/mods.
Use custom ROMs/Firmware..
Downgrade firmware.
Use custom kernels.
Move updated system apps back to the system partition which saves user space.
Use and modify your device anyway you want.
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
REQUIREMENTS
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Motorola Device Manager installed [DOWNLOAD] - This insures that you have all the proper drivers installed
Stock KitKat firmware
Windows PC or Laptop
OEM USB cable
USB 2.0 port
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
EXTRAS
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
----------------------------------------------------------------------------------
MFASTBOOT SETUP
----------------------------------------------------------------------------------
For easy use
Windows Set-Up
Mfastboot does work with both Linux & Mac
Download Mfastboot [MIRROR]
Extract contents into a folder and place it into your Local Disk (C
Code:
[COLOR="Red"]Example[/COLOR] - [I]C:/ANDROID/Mfastboot[/I]
Open start menu and type CMD
Right click on CMD > select copy
Paste into Mfastboot folder
Finished
----------------------------------------------------------------------------------
BOOTING OPTIONS
----------------------------------------------------------------------------------
Once rooted, you can use a app like Quick Boot to perform these actions.
Reboot
Code:
Power + Volume Down
Reboot AP Fastboot
Code:
During [COLOR="Blue"]Reboot[/COLOR] > press and hold Volume Down
Reboot Recovery
Code:
During [COLOR="blue"]Reboot[/COLOR] > press and hold Volume Up
Bootloader Menu
Code:
During [COLOR="blue"]Reboot[/COLOR] > press and hold Volume Up + Down
----------------------------------------------------------------------------------
DEBLOAT LIST
----------------------------------------------------------------------------------
MUST HAVE ROOT
These apps (APK/ODEX) are safe to delete, freeze or rename.
SYSTEM > APP
Code:
3c_main.apk
Amazon_Audible.apk
Amazon_IMDb.apk
Amazon_Mobile.apk
Amazon_mp3.apk
Amazon_zappos.apk
Amazon_Zipaligned.apk
atfwd.apk (Wireless Display - Razr M/HD doesn't support wireless display)
BasicDreams.apk
Books.apk
Bug2GoStub.apk
com.gotv.nflgamecenter.us.lite.apk
com.motorola.android.nativedropboxagent.apk
com.motorola.android.settings.diag_mdlog.apk
Facebook.apk
FaceLock.apk
FastDormancy.apk (CDMA, unsure about GSM)
Galaxy4.apk
GoogleEars.apk
GoogleEarth.apk
GooglePinyinIme.apk
HoloSpiralWallpaper.apk
HotspotLauncher.apk
HPLegacyPlugin.apk
Kindle.apk
LiveWallpapers.apk
Magazines.apk
MagicSmokeWallpapers.apk
ModemStatsService.apk
MotionTrigger.apk (SmartActions Requirement)
MotVzwLocationService.apk
PhaseBeam.apk
PlayGames.apk
PlusOne.apk
ProgramMenu.apk
ProgramMenuSystem.apk
Protips.apk
Quickoffice.apk (Abandon by Google)
SlackerRadio.apk
Street.apk
Videos.apk
VisualizationWallpapers.apk
VMwareReady.apk (Corprate Crapware)
VSuiteApp.apk
vznavigator.apk
VZWAPNLib.apk
vzwapnpermission.apk
VZWAPNService.apk
VzwSystemUiExt.apk
YouTube.apk
Zap.apk
SYSTEM > PRIV-APP
Code:
3c_checkin.apk
3c_devicemanagement.apk
3c_notification.apk
3c_ota.apk
3c_sso.apk
Amazon_Appstore.apk
android-syncservice-app.apk
cce.apk
CircleWidget3D.apk
Cmas.apk
DemoMode.apk
Favorites.apk
FileManager.apk
GuideMe.apk
HomeConfig.apk ([COLOR="Red"]Need a Home Launcher installed before removing[/COLOR])
Homescreen.apk ([COLOR="Red"]Need a Home Launcher installed before removing[/COLOR])
IlsVzW.apk
LMIRescueSecurity.apk
LocalWipePolicyManager.apk
MotoCare.apk
MotoCareInt.apk
MotoDockHelperService.apk
MotoEmail.apk
NotificationTutorial.apk
QuickView.apk (Homescreen notification badge handler)
Setup.apk
SetupWizard.apk
SmartActionFW.apk
SmartActionMFW.apk
SmartActions.apk
SmartCarDock.apk
SmartDock.apk
VerizonSSOEngine.apk (Needed for MyVerizon data widget)
Vvm.apk
VzwCbsLoader.apk
VzwController.apk
VzwDeviceSetup.apk
VzwEntitlementService.apk
VZWPackageInstaller.apk
vzwPhoneExt.apk
VzwPhoneService.apk
VzwSecureSettings.apk
VzwSettingsExt.apk
Weather.apk (Needed by CircleWidget3D)
WapPushSI.apk
----------------------------------------------------------------------------------
MOTOROLA FIRMWARE LINKS
----------------------------------------------------------------------------------
> http://www.drdevs.com/devs/FXZ-files/
> http://drdevs.com/devs/FXZ-files/XT907 (Droid RAZR M)/
> http://motofirmware.center/files/category/24-scorpionmini-all-variants/
----------------------------------------------------------------------------------
EFS BACK-UP & RESTORE - USE THIS NOW!
----------------------------------------------------------------------------------
- Thanks to @rahimali > http://goo.gl/IJuE9v
> Advanced backup and restore utility of your device's sensitive partition and NV data. - Created by lyriquidperfection
FEATURES:
Automatic detection and termination of SAMSUNG Kies application and ADB server instances on startup.
Backup and restore partition images to and from compressed archives (*.tar.gz format).
Detects backup archives automatically on the device and PC for hassle free restoring.
Device Filter support to help users identify which partitions are the important ones to backup.
Extract and read device's PIT file to ensure efficient and accurate backup and restore operations (Samsung devices only).
Check MD5 hash during backup and restore operations to verify integrity of data written.
Option to Format EFS to wipe all data and recreate partition.
Options to reset Battery Cable, SPen and Earphone Jack counters on supported Samsung devices.
Option to fix Samsung devices that are 'stuck' in Factory Mode with the on screen overlay.
Option to fix Samsung devices that have Lock Screen issues and missing Power Button Menu.
A full featured AT and QCDM Terminal for sending custom commands and/or bytes to the connected device.
Qualcomm device support allowing many new features such as backup and restore of the FULL NV Item range.
Generate ESN / MEID / IMEI in reversed HEX format for Qualcomm repair operations.
Read and write ESN / MEID / IMEI to and from Qualcomm devices and QPST 'QCN Backup' files.
Send Diagnostic Password (16 Digits Hex) to unlock secure operations.
Read / write / send SPC (Service Programming Code) on Qualcomm devices.
Read / write Lock Code on Qualcomm devices.
Skip NV items during backup based on a defined profile list to enable FULL backups.
Ability to backup a custom NV item range based on a user defined list.
Automatic detection and switching of USB settings when launching Qualcomm NV Tools.
Option to display various device, ROM and BusyBox related information at the click of a button.
Option to restore NV data from internal '*.bak' files if they exist to fix corrupt or incorrect IMEI number.
Option to repair NV data file ownership to fix 'Unknown baseband' and 'No signal' issues.
Supports backup and restore of 'fsg', 'fsc', 'backup' and other partitions that do not have a corresponding filename defined in the PIT file.
Enable / Disable 'HiddenMenu' on newer devices.
Launch PhoneUtil, UltraCfg and other built in hidden device menus straight from the application UI.
THREAD / DOWNLOAD:
> http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
GUIDES
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
----------------------------------------------------------------------------------
1a. ROOT - Locked Bootloaders
----------------------------------------------------------------------------------
-------------------------------------------------------------
HYDROGEN PEROXIDE ROOT:
-------------------------------------------------------------
For locked bootloaders with a kernel build date after June 3, 2014
Code:
[B][I]Settings > About phone > Kernel version[/I][/B]
Created by HydrogenXS & SERG_GANGUBAS
Based on Giefroot by zxz0O0 / Team Keen
Video Tutorial and Instructions by @sd_shadow > http://forum.xda-developers.com/droid-razr-m/general/root-droid-razr-m-xt907-183-46-15-t3137351
EXPLOIT SOURCES > http://forum.xda-developers.com/showpost.php?p=58916587&postcount=
ROOT THREAD > http://forum.xda-developers.com/droid-razr-m/general/root-droid-razr-m-xt907-183-46-15-t3137351 - sd_shadow's root thread.
-------------------------------------------------------------
TOWEL ROOT:
-------------------------------------------------------------
For locked bootloaders with a kernel build date before June 3, 2014
Code:
[B][I]Settings > About phone > Kernel version[/I][/B]
Download Towel Root [XDA] [WEBSITE]
Place on external SDcard
Install and run Towel Root
Follow any in-app prompts
Reboot
PROFIT!
----------------------------------------------------------------------------------
1b. ROOT - Unlocked Bootloaders
----------------------------------------------------------------------------------
Download and install a custom recovery (Instructions listed below - #3)
Download a Superuser flashable zip [SuperSU] [CWM Superuser]
Place on external SDcard
Enter Recovery
Flash Superuser.zip
Reboot
PROFIT!
----------------------------------------------------------------------------------
2. BOOTLOADER UNLOCKING
----------------------------------------------------------------------------------
KITKAT 182/183.46.10 FIRMWARE ONLY.
WILL NOT WORK ON THE 182/183.46.15 RAZR M FIRMWARE OR THE MOTO LUGE.
> Unlockable Firmware - forum.xda-developers.com/showpost.php?p=57339009&postcount=2
--------------------------------------------
APK
--------------------------------------------
Download Towel Root [XDA] [WEBSITE] - Disregard if you have previously rooted using Towel Root
Download Motopocalypse [WEBSITE] [DOWNLOAD]
Place both on external SDcard
Install and run Towel Root
Follow any in-app prompts
Reboot
Install and run Motopocalypse
Follow any in-app prompts
Reboot
PROFIT!
--------------------------------------------
DESKTOP / PC
--------------------------------------------
Head to djrbliss' (Dan Rosenburg) website to read the instructions and download.
> http://vulnfactory.org/blog/2013/04/08/motorola-bootloader-unlocking/
If successful, you will see the Unlocked Bootloader Warning when you reboot your device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After unlocking your bootloader, you may want to remove the "Unlocked BootLoader Warning" screen (Image above).
You can do this by flashing a boot logo. Head to the link below to choose and flash either the stock or a custom boot logo.
Custom Boot Logos > http://forum.xda-developers.com/droid-razr-m/themes-apps/themes-custom-boot-logos-t2824690
----------------------------------------------------------------------------------
3. CUSTOM RECOVERY
----------------------------------------------------------------------------------
MUST HAVE A UNLOCKED BOOTLOADER
Custom recoveries built and provided by dhacker29 & nobe1976
Download your choice of custom recovery, then proceed to installation.
[TWRP - XDA] [TWRP - DHACKER29][TWRP - DROIDRZR] [CWM - XDA]
[DOWNLOAD (MIRROR)]
XT907 KitKat compatible recoveries
TWRP
Code:
- TWRP - 2.7.1.0.img
- TWRP - 2.8.0.0.img
- TWRP - 2.8.1.0.img
- TWRP - 2.8.2.0.img
- TWRP - 2.8.3.0.img
CWM
Code:
- CWM - 6.0.4.9.img
-------------------------------------------------------------------------------------
INSTALLATION
-------------------------------------------------------------------------------------
-------------------------------
OPTION 1
-------------------------------
MUST HAVE A UNLOCKED BOOTLOADER
Download Mfastboot [MIRROR] - Refer to Mfastboot setup
Place recovery.img into mfastboot folder
Open CMD and [TYPE]
Replace >recovery-name< with the name of the recovery you downloaded. You my re-name the recovery.img to whatever you prefer. I re-named it to TWRPKK.img
Code:
mfastboot flash recovery [COLOR="Red"]>recovery-name<[/COLOR].img
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot reboot
When you tap [ENTER] press and hold Volume Up (+) on your device until the phone boots into recovery to verify installation was successful
DONE!
-------------------------------
OPTION 2
-------------------------------
MUST HAVE A UNLOCKED BOOTLOADER
MUST HAVE ROOT
Download recovery
Place on external SD card
Download and install [Flashify] or [Rashr]
Follow in-app prompts
PROFIT!
----------------------------------------------------------------------------------
RECOVERY NOT WORKING?
----------------------------------------------------------------------------------
MUST HAVE ROOT
If the custom recovery isn't sticking, you will need to re-name recovery-from-boot.p
-------------------------------
OPTION 1
-------------------------------
Using a root explorer navigate to
Code:
/system/recovery-from-boot.p
Rename it to
Code:
recovery-from-boot.p[COLOR="RoyalBlue"].bak[/COLOR]
Reboot
Re-flash custom recovery
PROFIT!
-------------------------------
OPTION 2
-------------------------------
Manually in adb shell or Terminal Emulator
Open command prompt and [TYPE]
Code:
su
Tap [ENTER] then [TYPE]
Code:
mv /system/recovery-from-boot.p /system/recovery-from-boot.p.bak
Reboot
Re-flash custom recovery
PROFIT!
----------------------------------------------------------------------------------
4. RESTORING / UPGRADING STOCK FIRMWARE
----------------------------------------------------------------------------------
If you are having difficulties with RSD Lite, Please try one of these two programs.
Both are alternatives to RSD Lite.
House of Moto
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-32/
RSD Flasher
http://www.droidrzr.com/index.php/topic/48904-rsd-flasher-beta-windows-only/
> If upgrading - be sure to flash the KDA20.62-10.1 firmware, so you could unlock your bootloader.
-------------------------------
OPTION 1
-------------------------------
Restoring/Upgrading with RSD Lite
Download current or updated firmware
[Moto Firmware Link #1]
[Moto Firmware Link #2]
[Alternative Download (4.4.2 KDA20.62-10.1)] - Thanks to @rahimali
Download RSD Lite [MIRROR] [GOOGLE]
Install and run RSD Lite
Boot Device into AP Fastboot - Refer to Booting Options
Connect your device via OEM USB cable in a USB 2.0 port
Select the [3 dot button] [...]
Navigate and select the downloaded firmware zip and click [OPEN].
Select [Decompress And Start Flashing].
When finished, reboot.
DONE!
-------------------------------
OPTION 2
-------------------------------
DO NOT UPGRADE WITH MFASTBOOT
Restoring with Mfastboot
Download current firmware [DOWNLOAD]
Download Mfastboot [MIRROR] - Refer to Mfastboot setup
Open the zip and extract these files to your Mfastboot folder
Code:
NON-HLOS.bin
system.img
boot.img
recovery.img [COLOR="Red"](OPTIONAL)[/COLOR]
Boot your device into AP Fastboot - Refer to Boot Options
Connect your device with the OEM USB cable in a USB 2.0 port
Open CMD and [TYPE]
Code:
mfastboot flash modem NON-HLOS.bin
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot erase modemst1
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot erase modemst2
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot flash system system.img
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot flash boot boot.img
Tap [ENTER]
When finished [TYPE] (OPTIONAL)
Code:
mfastboot flash recovery recovery.img
Tap [ENTER]
When finished [TYPE]
Code:
fastboot erase cache
Tap [ENTER]
When finished [TYPE] (OPTIONAL)
Code:
fastboot erase userdata
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot reboot
Tap [ENTER]
PROFIT!
----------------------------------------------------------------------------------
5. DEODEXING
----------------------------------------------------------------------------------
MUST HAVE A UNLOCKED BOOTLOADER
MUST HAVE CUSTOM RECOVERY
Deodexing is basically repackaging of these APKs in a certain way, such that they are reassembled into classes.dex files. By doing that, all pieces of an application package are put together back in one place, thus eliminating the worry of a modified APK conflicting with some separate odexed parts.
So, Deodexed ROMs (or APKs) have all their application packages put back together in one place, allowing for easy modification such as theming. Since no pieces of code are coming from any external location, custom ROMs or APKs are always deodexed to ensure integrity. - R_a_z_v_a_n
--------------------------------------------------
DOWNLOAD - KitKat_Deodexer
--------------------------------------------------
Extract the contents of the Kitkat_Deodexer.rar to your PC
Plug in your device
Ensure that USB debugging is enabled
Code:
Settings > Developer options > USB debugging
Dont see developer options?
Code:
Settings > About phone > Tap "Build number" 7 times
Run main.bat
[TYPE 1] and tap [ENTER] - to create a working directory
[TYPE 2] and tap [ENTER] - to pull the System files for deodexing
When finished, [TYPE 3] and tap [ENTER] - to start deodexing
When finished, [TYPE 4] and tap [ENTER] - to create a flashable zip
Move [deodex_install.zip] to your external SD card
Unplug your device
Enter Recovery
Flash [deodex_install.zip]
Reboot
PROFIT!
----------------------------------------------------------------------------------
6. VZW HOTSPOT / WIRELESS TETHER HACK
----------------------------------------------------------------------------------
MUST HAVE ROOT
Thanks to Topsnake for the Mod [THREAD]
-----------------------------
STEP 1
-----------------------------
Using any [ROOT EXPLORER]
Navigate to
Code:
/ system / priv-app
Look for and delete (or rename)
Code:
VzwEntitlementService.apk
VZWEntitlementService.odex
Continue to step 2
-----------------------------
STEP 2
-----------------------------
Using a Root Explorer or Build.Prop editor
Navigate to
Code:
/ system / Build.Prop
Open in text editor and add to the bottom
Code:
ro.mot.tether_dun_required=0
ro.tether.denied=false
net.tethering.noprovisioning=true
Save and close
Reboot
PROFIT!
----------------------------------------------------------------------------------
7. DISABLING THE OTA POP-UP
----------------------------------------------------------------------------------
MUST HAVE ROOT
Using any [ROOT EXPLORER]
Navigate to
Code:
/ system / priv-app
Delete or rename
Code:
3c_ota.apk
Reboot
PROFIT!
----------------------------------------------------------------------------------
8. STUCK IN AP FASTBOOT
----------------------------------------------------------------------------------
Motorola uses the command fb_mode_set to insure that your device will reboot into AP fastboot to avoid any problems while flashing firmware.
To clear this we need to do the following:
While in AP fastboot, connect your device to your PC
Open mfastboot then [TYPE]
Code:
fastboot oem fb_mode_clear
Tap [ENTER]
When finished [TYPE]
Code:
mfastboot reboot
Tap [ENTER]
PROFIT!
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
LINKS
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
[INDEX] Motorola Droid Razr M (2015)
[HELP THREAD][Motorola Droid Razr M] Ask ANY Question. Noob Friendly
Motorola Official Change Log
[How-To][Tutorial] Downgrade Kit Kat 4.4.2 to JB 4.1.2
[KK] Add external SD Card writing for all apps
[DUMP][DEV][xt907] 4.4.2 OTA Partition Dump
[WORKAROUND] Access hidden settings menus
[MOD][4.4.2] Native Tether Exploit for XT907 Build 183.46.10/ Build 182.46.10
[HowTo] [VZW XT907/926 RAZR M/HD] Unlock US GSM Carriers Using RadioComm
[THEMES] Custom Boot Logos
[INDEX] Motorola USB Drivers, RSD Lite, Firmware Links & More
Universal ADB Drivers
--------------------------------------------------------------------------------------------------------------------------------------------
Did I miss something? Do you want me to add something? Let me know so I can add it to the guide/FAQ.
[*]This thread has been designed to be viewed on a Desktop and in XDA's 2015 layout. (looks terrible in Tapatalk)
[*]Being a Recognized Themer here at XDA, I have a ad-free template. So the thread layout may look different to me then for you. So, if you need me to adjust something, please let me know.

Finally an up to date, very well written, easy to follow guide.... Thank you kindly for putting this together ATTACK
We cannot teach people anything; we can only help them discover it within themselves.

Guys i can't see my backuped stoch kitkat rom in phome memory i am using cwm that you recommended in your post pls help. Backup is saved somewhere more than 1gb is unavailable after backup pls help.
Sent from my XT907 using XDA Free mobile app

taimur272 said:
Guys i can't see my backuped stoch kitkat rom in phome memory i am using cwm that you recommended in your post pls help. Backup is saved somewhere more than 1gb is unavailable after backup pls help.
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
Code:
/sdcard/ClockworkMod/Backup
OR
Code:
/mnt/shell/emulated/0/ClockworkMod/Backup
OR
Code:
/storage/emulated/0/ClockworkMod/Backup

Can i change that directory ! Can someone tell me a best kernel for stock kitkat rom and also doeas anyone phpne gets heatup while on 3g umts.
Sent from my XT907 using XDA Free mobile app

taimur272 said:
Can i change that directory ! Can someone tell me a best kernel for stock kitkat rom and also doeas anyone phpne gets heatup while on 3g umts.
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
I use TWRP, so I have no idea if you can change the directory in CWM. I think there maybe a option to backup to sdcard1 or something like that, but again I don't use CWM.
There are no kernels for Stock firmware unless you downgrade and use CM11_jbbl ROM. The heat issue has been reported multiple times, I dont have any heat issues but others do. You could try and disable FastDormancy.apk/odex. I read that it helps, but IDK.

My phone heated up with too many radios running at once service locations was the main beast but disabling allot of its permissions fixed that I have also noticed high battery loss when my phone is searching between 3g/4g ect which also penalty meant heat....
Sent from my XT907 using XDA Free mobile app

My phones heatups when i use 3g(signal 2 bars) on my phone and facebook simultaneously....... Can it be cpu that's heating up.... Can you tell me a good app to control cpu frequency and which supports dual core
Sent from my XT907 using XDA Free mobile app
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
I also chanhed my stock kernel with recompiled kernel found in speaker popping thread it fixed my sound issue and also sleep issue
Sent from my XT907 using XDA Free mobile app

Can i update my device from the ota update
My device is unlucked but I decided to unroot my device
Any suggestions?
Sent from my XT907

What exactly is included in the update? Are there any features I will miss out on by not updating?
Sent from my XT907 using XDA Free mobile app

immadeofpixels27 said:
What exactly is included in the update? Are there any features I will miss out on by not updating?
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
No "new" features.
I'm still waiting on there official changelog, but what I do know is that they patched FakeID, Futex & TrustZone. Also SMS/MMS fixes.
Motorola official changelog > https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/87530/p/30,6720,8577

Rooted xt907, verizon pushing update
Hello,
I used the TowelRoot method on my XT907 a couple of months ago. Just wanted to get bloatware off, and add a couple of battery life apps.
It was successful, and I have enjoyed being rooted so far. However, saturday verizon tried to push an update, and I have rejected it the last couple of days. As i am unsure if i'm safe to accept this update. Also, since they have pushed this crap at me, my phone has been doing very weird things. It was completely fine before this. Now it blacks out randomly, and comes right back.
Anyhow, the question is should i unroot before accepting this update?
Thanks for any help, and sorry if i've posted in the wrong board.

centelred said:
Hello,
I used the TowelRoot method on my XT907 a couple of months ago. Just wanted to get bloatware off, and add a couple of battery life apps.
It was successful, and I have enjoyed being rooted so far. However, saturday verizon tried to push an update, and I have rejected it the last couple of days. As i am unsure if i'm safe to accept this update. Also, since they have pushed this crap at me, my phone has been doing very weird things. It was completely fine before this. Now it blacks out randomly, and comes right back.
Anyhow, the question is should i unroot before accepting this update?
Thanks for any help, and sorry if i've posted in the wrong board.
Click to expand...
Click to collapse
Unlock your boot loader before doing anything else ... If you have debloated you will probably have to use rsd to either flash directly to the update or to .10 then ota up to the update... But be sure to unlock your boot loader or it will be locked for good and there is not a way to root the update yet with out an unlocked boot loader...BTW mine has been doing this black out thing you describe after rejecting and deleting the update...
We cannot teach people anything; we can only help them discover it within themselves.

centelred said:
Hello,
I used the TowelRoot method on my XT907 a couple of months ago. Just wanted to get bloatware off, and add a couple of battery life apps.
It was successful, and I have enjoyed being rooted so far. However, saturday verizon tried to push an update, and I have rejected it the last couple of days. As i am unsure if i'm safe to accept this update. Also, since they have pushed this crap at me, my phone has been doing very weird things. It was completely fine before this. Now it blacks out randomly, and comes right back.
Anyhow, the question is should i unroot before accepting this update?
Thanks for any help, and sorry if i've posted in the wrong board.
Click to expand...
Click to collapse
Did you unlock your bootloader? If not I suggest you do so now before taking any update. If you update to 183.46.15 and do not have a unlocked bootloader you will NOT be able to root.
In order to update, you'll need to have a stock system (unaltered) and recovery. I would suggest you follow #4 option 2 to restore.
Or alternatively you could delete or rename this app to disable the OTA pop-up nag screen.
Code:
/ system / priv-app / [COLOR="Red"]3c_ota.apk[/COLOR]

Thanks for your help guys!! I'm not sure if i've unlocked the bootloader, but i'll do the research on how to do that. I just didn't want to accept the update, if it was going to cause further problems.

Hi!
Attack, I just want to say, absolutely fantastic and thorough thread! Covered anything and everything!
I just have one problem...towelroot says my phone is not supported!
xt907 running version 182.46.15. TR worked flawlessly on my razr HD, and since no one else had problems with it, I don't understand why I'm receiving this error! Any ideas? Thanks

xChowderrrx said:
Hi!
Attack, I just want to say, absolutely fantastic and thorough thread! Covered anything and everything!
I just have one problem...towelroot says my phone is not supported!
xt907 running version 182.46.15. TR worked flawlessly on my razr HD, and since no one else had problems with it, I don't understand why I'm receiving this error! Any ideas? Thanks
Click to expand...
Click to collapse
Moto patched the FakeID, Futex & TrustZone exploits on the .15 OTA. So unless your bootloader is unlocked, your stuck without root.

So I could use the FXZ and update to 183.46.10 and it should work?

xChowderrrx said:
So I could use the FXZ and update to 183.46.10 and it should work?
Click to expand...
Click to collapse
Is your bootloader unlocked?

ATTACK said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
No sir, I can't unlock until I root, correct? And Samurai's FXZ is for locked or unlocked razr M's. I could root and unlock once I get to that version (through RSD or HouseOfMoto), right?

The easiest way to get root and recovery on T2 ultra dual {5.1.1} {.182}

My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.

This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA

there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources

r2rdcroix said:
This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
Click to expand...
Click to collapse
When you tick all the boxes in prf creator, kernel gets added.
Sent from my D5322 using XDA Forums Pro.

rrd84 said:
there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
Click to expand...
Click to collapse
Yeah I already said it's a sequel to my first post. In which you would see how to root D5322 on 5.0.2, and ofcourse recovery is needed. Thanks.
Sent from my D5322 using XDA Forums Pro.

Good work. But we know that this is not really easy. hehe

dropdan said:
Good work. But we know that this is not really easy. hehe
Click to expand...
Click to collapse
yeah!

Does this root 5.1.1 by 100%? Can we install Modded Play Store by this root method?

Need step by Step instructions please
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:

Thanks. For my XPERIA T2 ULTRA DUAL I had to made a change:
Instead of using the Recovery-Software you (rituraj_singh) offered I had to use the software (TWRP) recommended b abcdjdj in his post from 27th May 2014 ((D5322) Dual Recovery) on the XDA-Forum.
For the not-experienced Users of Androxyde Xperia Flash Tool: You can use the XperiFirm-Software (XI-Button in the Flash-Tool) and install the 5.0.1 (19.3.A.0.472)-Firmware from MELA Latin, but you have to overwrite also the Userdata and the Apps-Log, otherwise there are problems. After flashing use KingRoot to root your device, than replace kinguser using the batch-script of w0lfdroid.com (May 2015) placing the mrw-folder (included in the downloaded zip) on the intern memory (important) and executing it with Terminal Emulator. Than open SuperSu (installed by the script, not by you), and actualize the root-script. Afterwards reboot.
A Tip: After having installed the TWRP-Software on your phone you could have problems rebooting into the system, so prepare all and after having flashed the custom prf-rom on the device all would be function!

A step-by-step-Version (summary)
sachin.sachania said:
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:
Click to expand...
Click to collapse
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
The copyright is by the "Post"-authors like rituraj_singh and abcdjdj (I took the links to the posts nearby the description of the step) and by w0lfdroid.com, xperiafirmware.com and the software-producers.
I only wanted to create a step-by-step-summary. There is no garantuee which garantuees success using the summery! No responsability dad it does not destroy your mobilephone. Use it at your own risk! Thank you to the original "owners" of the posts. I hope the summary is ok for them! Otherwise contact me.
Time: maybe 1 hour or 2 hours
Tipp: if you until yet did not install Android 5.1.1 on your Xperia T2 Ultra Dual you do not have to follow the steps which are describing how to download the older Firmware via XperiFirm, but you should have installed the FlashTool just for the drivers (You won't use it directly). You can use the steps describing how to root the older Firmware using KingRoot, than continue with step 7.
1) Install the Androxyde FlashTool on your Computer: http://www.flashtool.net/downloads.php or found on the XDA-Forum, install the ADB-Packages (ADB, ADB-Drivers) on your Computer and make the ADB-Command part of the "path"-Variable of your Computers Terminal (see Google)
2) Install XperiFirm (cause easy for beginners): open the FlashTool and click on the "XF-button" near the "plus-in-a-square"-button and the "flash"-button.
3) After having installed the XperiFirm-Tool open it and click on "Xperia T2 Ultra (tianchi)" and select "D5322/XM50H (dual)"
4) Than click on the "Check-All"-Button over the Line "Latest Release"
5) Click on "MENA Latin" in the "Market"-Line and than on the "19.3.A.0.472 / R3C" and download it (having activated "unpack automatically")
6) Go to "xperiafirmware.com/8-firmware/58-sony-xperia-t2-ultra-dual-d5322" and download it (see chapter "1." on the website ), but do not flash it
7) Download the newest PRF-Creator (ZIP) from the following XDA-Forum-Link and unzip it: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
8) Download the newest SuperSU-ZIP from chainfire (https://download.chainfire.eu/696/SuperSU). and paste the ZIP in the unzipped PRF-Creator-folder: https://download.chainfire.eu/696/SuperSU
9) Now copy the .ftf-file (Firmware) downloaded from xperiafirmware.com also in the unzipped PRF-Creator-folder and open the PRF-Creator.exe
10) The PRF-Creator asks for the .TFT-File (select the one you downloaded from xperiafirmware.com) and for the SuperSU-ZIP-File (select the one downloaded from chainfire)
11) Select in the "Include"-field: "Kernel"; "FOTA-Kernel"; "Modem" and "LTALable", also "Sign ZIP" and "Legacy Mode"
12) Click create and wait until finished
13) Copy the created "flashable-prerooted.zip" from your unzipped PRF-Creator-Folder to the external SD-Card of your Device
14) BackUp your mobilephone using the "Sony PC Companion" or simular software like Wondershare's "MobileGo"
14a) Control if you have unlocked your Boatloader (normally it's locked) and if it's locked, go to the "Sony Mobile Developers Unlock Bootloader Website" and follow the instructions there Important: You could have to install ADB and Sony's ADB-Drivers (find ADB using google) and the Sony FlashTool "Emma" will not work with the Xperia T2 Ultra Dual
15) Shut down your phone and start it holding the "Volume-down"-Button while plugging in the USB-Cable (it won't show more than a black screen)
16) Close "XperiFirm", wait until it finished and then click on the "Flash"-Button and select in the new window "Flashmode" and "OK" (obviously)
17) Select the Firmware you downloaded before with XperiFirm (19.3.A.0.472) and select in the "Wipe"-Field: "APPS_LOG" and "USERDATA" (!!!important!!! otherwise problems)
18) Click on the "Flash"-Button and wait until it's done (sometimes the flashtool has problems with the files - dont worry: shutdown the FlashTool and retry it once more)
19) Unplug the mobilephone from the USB-Cable, start it and follow the instructions
20) After having prepared the mobilephone go to "kingroot.net/wap/download" and download KingRoot (sometime trouble with the site, try it once more)
21) Afterwards enable the DeveloperMode (settings - About Phone - click "build number" 7 times) and enable the "unknown sources" (settings - Security - unknown sources)
22) Install KingRoot and root your Xperia T2 Ultra Dual
23) Install "Terminal Emulator" from the Google Play-Appstore to your device and open it
24) Go to "http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html" and download the newest "Replace KingUser with SuperSU.zip" and unpack it to your device's intern memory (!!!important!!! otherwise no function)
25) In the Terminal Emulator App enter "su" for gaining "root"-access ("Enter" obviously), than enter "sh /sdcard/mrw/root.sh" and wait until it finish (it will open SuperSU)
26) Actualize the file as requested by SuperSU and, after having had success, reboot your mobilephone
27) Install a Root-Checker-App from Google Play Store and control, if you see a window from "SuperSU", otherwise repeat the last steps
28) Go to "https://goo.gl/lg6I2t" or visit directly the XDA-Forum-Post of abcdjdj (http://forum.xda-developers.com/showthread.php?t=2764408) and download his "TWRP-KK-T2_DUAL-V3.img" or newer
29) Shut down your mobilephone. Afterwards hold the "Volume-Up"-Button while plugging in the USB-Cable (it shows only a black screen) and connect it to the Computer
30) Check if you have installed all fastboot drivers for your device, then open the "Command Line" of your Computer "as Administrator" and enter: "fastboot flash boot (path-to-the-file-downloaded-in-the-last-step)/TWRP-KK-T2_DUAL-V3.img" and click obviously "Enter"
31) Now unplug your mobilephone, than hold the "Volume-down"-Button and the "Power"-Button at the same time: TWRP-Recovery will start
32) Select "Wipe", than "Advanced Wipe", than select "intern. memory", "dalvik", "cache", "data" and "system"
33) Swipe to Wipe
34) Go to TWRP's home (twice times the "back"-Button) and select "Install", than "external SD-Card" and select "flashable-prerooted.zip" and confirm the warning, than SWIPE to INSTALL (flashing)
35) Wipe the Dalvik-Cache
36) Reboot into System and follow your mobilephone's instructions
37) Install a Root Checker App from Google Play Store and control if it's rooted, afterwards install the backup of your mobilephone made at the beginning
38) Install "Titanium Backup" and disinstall (after having done a backup of the app you want to delete) Apps you do not want
39) Install "Link-to-SD" from GooglePlay, prepare your external SD-Card with a partition manager (using your Computer) and copy all possible apps completly to the SD-Card

This works on T2 ULTRA D5306 Single SIM
theokon said:
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
Click to expand...
Click to collapse
Well my friend, first at all, this is a awsome guide, it really help me to load the 5.1.1 on my SP. I Must said that even if this looks
overwhelming at the begining, it's pretty easy to do it.
Just for the FeedBack, this method works in:
T2 Ultra D5306 Single SIM, TELCEL.
I use the US CUSTOM Stock ROM 5.1.1 ( 19.4.A.0.182 ), if ask for the FTF, look at the FTF MEGAPOST.
Thanks to @rituraj_singh for find this method and @theokon to make the Easy-Mode Guide.
This thread must being Sticky.
PS: You have to add one step: When you reboot after the Flash, it can take a while in start the smartphone, It is to prevent panic if they see it takes a lot time to start, they might think it is bricked and try to restart it. :good:

This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.

virgilone2 said:
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
Click to expand...
Click to collapse
You got the error when you try to mount on /dev/block/mmcblk1p2 ? it and said that the mount fail?
I had that error as well, maybe you have to try this @virgilone2:
1.- Uninstall the Link2SD.
2.- Install the SD MAID and run it, clean it up.
3.- Reinstall the Link2SD.
4.- Install the Recovery (I use this) [ XZDualRecovery 2.8.21 ] or the same you use in the guide.
5.- Run the Recovery, and go to Wipe > Advance Wipe > Davik Cache, Swipe to Wipe, after it ends go to Reboot > System.
6.- Before your smartphone start as usual, going to pop one little window with a counter, wait to end (Maybe take a while).
7.-Run you Link2SD, it have to Mount the ext2 partition and ask for reboot, if isnt the case, just recreate the mount script.
8.- Enjoy your Link2SD in Lollipop 5.1.1 :good:
This works for me, i hope works for you as well

Windows 10 Driver Problems
When having updated to Windows 10 driver problems could happen.
When entering "fastboot devices" in your computer's terminal and nothinh happens it is like this.
You can solve this easily:
1) Plug in your phone in fastboot mode into the computer (Volume Up + Plug-In of the USB-cable)
2) Go to the"Devices manager" (or called simular, as I don't know how to translate it correctly), where you will find the unknown S1 fastboot driver.
3) Download the official Sony flashing tool "EMMA" and reinstall the "Android Studio" in order to get the correct drivers
4) For security download also the "Universal ADB Drivers Package" from chip.de and install it
5) Back in the Device Manager reinstall the correct driver selecting it from the drivers list (!): Sony SA0110 - ADB Interface driver

rituraj_singh said:
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
Click to expand...
Click to collapse
worat guide i ever seen in xda !!
no links !!

manojkumar8552 said:
worat guide i ever seen in xda !!
no links !!
Click to expand...
Click to collapse
Well thanks!! Links needed to perform the steps suggested are everywhere in the realm of Internet. Uploading same thing again and again is waste of space,data and everything. Hope you understand.
Ftf can be downloaded through xperi-firm and recovery can be downloaded from nut's Xperia files website. SuperSU is already available in more than 1000 places on Internet. And prf creator is created by a certain developer which is already available on xda. So reposting his item might be considered as kinda theft/plagiarism. And this is already mentioned in this post that it's a sequel of previous post. So please do your own bit of work/home work before posting negative comments.
Sent from my D5322 using XDA Forums Pro.

I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk

manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
This post is a sequel of previous post. To perform the steps mentioned you need to be on earlier versions of Android. Like 5.0.2 or earlier. And recovery must be installed in that. If you're on 5.0.2 follow my post about how to root on 5.0.2.
Sent from my D5322 using XDA Forums Pro.

manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Well.. You can use KingRoot v 4.5.2*to root 5.1.1 and for SuperSU follow my previous post.
Sent from my D5322 using XDA Forums Pro.