Develop Bugs

/Possible brick?/ Problems Unbricking

What does a SE Xperia play brick look and feel like? I may have bricked... no fastboot, when i hold the power button, i get bursts of vibration (similar to the one when you DO actually turn it on) and it doesn't actually turn on.

http://androidflip.com/unbrick-xperia-play-flashtool-step-step-guide/
I Decided to use this to unbrick and everything downloaded fine. the PROBLEM is that when i get to the part where i flash the system, it gives me this:
Code:
27/018/2011 18:18:47 - INFO - <- This level is successfully initialized
27/019/2011 18:19:05 - INFO - Preparing files for flashing
27/019/2011 18:19:09 - INFO - Searching Xperia....
27/019/2011 18:19:09 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&2F64E158&0&4
27/019/2011 18:19:09 - INFO - Start Flashing
27/020/2011 18:20:15 - INFO -
27/020/2011 18:20:15 - INFO - Flashing loader
27/020/2011 18:20:15 - ERROR - Error flashing. Aborted
27/020/2011 18:20:15 - INFO - Now unplug the device and power it on
27/020/2011 18:20:15 - INFO - Then go to application settings
27/020/2011 18:20:15 - INFO - turn on Unknown Sources and Debugging
THIS is a problem, because my "device" is unable to turn on. Options?

Are you using flashtool beta version 0.2.9.1?
Have you installed ggsetuo.exe (drivers that came with flashtool)?
Are you using a compatible ftf file for your phone?
Regards Dousan...

Just following the tutorial. The FTF was said to be the generic one for the Xperia Play. For drivers, I don't remember if i installed them last time, but my SEXP was recognised so i would think that i did. I'll try to install them and see if that does anything. Flashtool version: unknown. I'll check.

Wich model do you have R800i/a/at/x.
Afaik the x and at models are not compatible with the UK generic FW. One dude got the UK generic to work on a x model by doing alot of tweaking, but otherwise non.
It could be that you connect your device to early and it times out before it starts flashing?
Maybe you can restore with SEUS?
Regards Dousan...

I have R800x. Where would I be able to find a compatable ftf file?

I may have found the stock R800x FTF http://forum.xda-developers.com/showthread.php?t=1201725

brainard52 said:
I may have found the stock R800x FTF http://forum.xda-developers.com/showthread.php?t=1201725
Click to expand...
Click to collapse
Yes thats the one, you'll need the 'full system' ftf. It states that your bootloader will relock when flashing this file, but you should restore 100%.
So you'll need to go through unlocking and rooting again if you want that.
If you want to go to 2.3.3 i think you have to opdate to 2.3.3 before unlocking your bootloader or else you end up with a brick. Then unlock and root or you might be able to unlock/root/relock/update OTA in that order? I don't know for sure how the R800x works as it's slightly different than my R800i.
As stated I'm not 100% sure on the procedure for updating and rooting when you've flashed the 'full system' file, so ask about it in the thread you linked to or there might be a thread about it in the dev section.
Regards Dousan...

Awesome. Now, the file I downloaded is 236498950 bytes, or 225.5 MB. aproximately how long will the flashing take, and what message will i receive after it IS finished?

brainard52 said:
Awesome. Now, the file I downloaded is 236498950 bytes, or 225.5 MB. aproximately how long will the flashing take, and what message will i receive after it IS finished?
Click to expand...
Click to collapse
I'm not sure haven't timed it, but would say around 3-5 min. and the flashing will end with the same thing as when you got an error (flashing system.sin takes the longest afaik, sometimes i've thought it's stalled lol) :
Code:
27/020/2011 18:20:15 - INFO - Now unplug the device and power it on
27/020/2011 18:20:15 - INFO - Then go to application settings
27/020/2011 18:20:15 - INFO - turn on Unknown Sources and Debugging
The file size sound about right since your FW is stripped from SE stuff
Regards Dousan...

I got it fixed. It took about two seconds to fix. Titanium backup helped me out a lot.
Sent from my R800x using XDA App

Error when rooting phone FTError

I just flashed to LT15i_4.0.2.A.0.62_Generic Global World and when I use flashtools to uroot I get
05/007/2012 02:07:52 - INFO - <- This level is successfully initialized
05/007/2012 02:07:52 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
05/007/2012 02:07:52 - INFO - You can drag and drop ftf files here to start flashing them
05/007/2012 02:07:57 - INFO - Device connected with USB debugging on
05/008/2012 02:08:00 - INFO - Connected device : LT15
05/008/2012 02:08:00 - INFO - Installed version of busybox : N/A
05/008/2012 02:08:00 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
05/008/2012 02:08:01 - INFO - Pushing C:\Flashtool\.\devices\LT15\busybox\1.19.0\busybox to /data/local/tmp/busybox
05/008/2012 02:08:03 - INFO - Pushing C:\Flashtool\.\custom\root\zergrush.tar.uue to /data/local/tmp
05/008/2012 02:08:04 - INFO - Running part1 of Root Exploit, please wait
05/008/2012 02:08:26 - INFO - Waiting for device
05/009/2012 02:09:26 - INFO - Forced stop waiting.
05/009/2012 02:09:26 - INFO - Running part2 of Root Exploit
05/009/2012 02:09:26 - INFO - Running rootit2
05/009/2012 02:09:27 - ERROR - Cleaning rootit files
Mounting /system R/W
FTError

.62 can't be rooted by any method yet. Either flash a pre-rooted kernel if you have an unlocked bootloader, if not flash.42, root then ota update.

sinkster said:
.62 can't be rooted by any method yet. Either flash a pre-rooted kernel if you have an unlocked bootloader, if not flash.42, root then ota update.
Click to expand...
Click to collapse
I have a locked bootloader. I flashed .42, rooted it, but OTA still failed.

If you keep attempting the ota then it will eventually complete, apparently.

See my post here:
http://forum.xda-developers.com/showpost.php?p=23285407&postcount=15

sinkster said:
If you keep attempting the ota then it will eventually complete, apparently.
Click to expand...
Click to collapse
Yes it did.

hi mate, if you are on 0.62, then just flash an old kernel using flashtool and then you would be able to root 0.62 as well
or have a look at this
http://talk.sonymobile.com/message/142493#142493

[Q] Flashtool stuck at "Reading device information"

Hi folks,
I'm trying to flash the latest firmware using flashtool, but it doesn't get any further than "Reading device information".
I've disabled driver signing checking and installed the flashtool, fastboot, z1 compact and common drivers for Rhine board devices. (I couldn't find anything else relevant)
I ran check drivers in flashtool and that seems ok. I'm using flashtool 0.9.16.1
Here's the log:
28/005/2014 00:05:23 - INFO - Flashtool Version 0.9.16.1 built on 06-16-2014 23:00:00
28/005/2014 00:05:23 - INFO - Executing search strategies to find proxy selector
28/005/2014 00:05:24 - INFO - No proxy found for IE. Trying next one
28/005/2014 00:05:24 - ERROR - Error parsing settingsprefs.js (The system cannot find the file specified)
28/005/2014 00:05:24 - INFO - Strategy firefox failed trying next one : java.io.FileNotFoundException: prefs.js (The system cannot find the file specified)
28/005/2014 00:05:24 - INFO - No proxy found for java. Trying next one
28/005/2014 00:05:24 - INFO - Syncing devices from github
28/005/2014 00:05:24 - INFO - Pulling changes
28/005/2014 00:05:24 - INFO - Devices sync finished.
28/005/2014 00:05:29 - INFO - Device connected in flash mode
28/005/2014 00:05:33 - INFO - List of connected devices (Device Id) :
28/005/2014 00:05:33 - INFO - - USB\VID_0FCE&PID_ADDE\7&FBF12B9&0&4 Driver installed : true
28/005/2014 00:05:33 - INFO - List of ADB devices :
28/005/2014 00:05:34 - INFO - - none
28/005/2014 00:05:34 - INFO - List of fastboot devices :
28/005/2014 00:05:34 - INFO - - none
28/006/2014 00:06:02 - INFO - Selected Bundle for Sony Xperia Z1 Compact (D5503). FW release : 14.4.A.0.108. Customization : DE
28/006/2014 00:06:02 - INFO - Preparing files for flashing
28/006/2014 00:06:13 - INFO - Please connect your device into flashmode.
28/006/2014 00:06:14 - INFO - Opening device for R/W
28/006/2014 00:06:14 - INFO - Reading device information
Anyone have an idea how to coerce this to work?

Are you on factory firmware now? If so try the Sony PC companion software.

mr mystery said:
Are you on factory firmware now? If so try the Sony PC companion software.
Click to expand...
Click to collapse
I'm on official Sony firmware. I'll give Sony PC companion a go now.
I thought I was not supposed to use it anymore since the phone's been rooted, at least none of the guides mention using the Sony tool.
But heck, if flashtool doesn't work I don't see what option I have really.
What I was trying to flash with flashtool was the firmware that Sony PC companion downloaded, then I decrypted it and created an ftf file from it.

For what it's worth - flashing with Sony PC Companion works fine, no need for flashtool.
Easy Root Toolkit v7 has restored root, and lockeddualrecovery beta installer 128 works fine.
129 reboots into a stuck Sony logo, so there's obviously an issue there, it seems that PhilZ recovery in that zip is buggy.
Now I'm back to normal. Still have no idea how to make flashtool work, and I would like to find out for when the next release is out.
Any help would be appreciated!

I had the same problem that you did. When you install the flashtool drivers make sure you install the flashmode, adb and z1 compact drivers. If your on windows 8 there's a process you need to do before you install the unsigned drivers.
In the flashtool FTF folder ensure your FTF is in there and if there are any other folders in there delete them as they are from the failed flash and flash tool will automatically refer to that folder every time you try and use flashtool.
Turn off your phone.
Run flashtool. I used the normal one not the x64 one.
Click Lightning icon.
Select firmware.
Flash and follow instructions.
I also forgot, make sure your computer doesnt go to sleep or turn its screen off while flashing as it will most likely fail again.
Sent from my D5503 using XDA Free mobile app

That's exactly what I've done, but it's not working. I'm on Server 2012, but for all intents and purposes it's same as Windows 8.
I went to disable driver signature checking and installed the following drivers from the pack:
flashtool
fastboot
z1 compact
common drivers for Rhine board devices
Are there any other drivers required for this?
Adb works fine, I believe those drivers came with Sony PC companion and I can use Easy Root Toolkit and stuff like that.
Also, assuming I can't get this to work - is it possible to get a flashable zip file from the ftf file - one that I could flash using PhilZ recovery?

The above mentioned advice does not work...stuck at reading information still...

TheNakedMam said:
The above mentioned advice does not work...stuck at reading information still...
Click to expand...
Click to collapse
Any luck with this? I'm having the same issue with my E2306. I have TWRP but i formated System, Cache, Data, Internal and ART partitions. I installed a beta 7.1.1 ROM which is missing features like Camera and Audio. Trying to restore Pexo ROM but the phone wont stay in fastboot mode nor is it recognized by fastboot devices.

Loarder.sin error

I have an Xperia play (R800i) running AuroraPlay v2.0.0 and most likely some version of doomkernel (they were on the phone when I received it) and I'm trying to change to a kernel and rom that suit my needs better, but my phone is erroring out in flasher. I'm new to custom phone software so I was wondering if anyone had an idea on whats going wrong? the flasher error is Loarder.sin finished with errors. Thanks in advanced

op
I was wondering if its a hard error to fix or maybe I haven't given enough information?

Kernel colonel said:
I was wondering if its a hard error to fix or maybe I haven't given enough information?
Click to expand...
Click to collapse
I don't have a R800i. I have the R800x, so I will probably be little help.
What program are you using to try to flash the firmware... Androxyde's Flashtool? Can you provide the output log that gives the exact error message you're getting? This information should help others to help you?

mattnmag said:
I don't have a R800i. I have the R800x, so I will probably be little help.
yes i am using Androxyde's Flashtool
And the log is
28/018/2015 21:18:38 - INFO - Selected Bundle for SonyEricson Xperia Play (R800i). FW release : 4.0.2.A.0.62. Customization : (1253-4437)
28/018/2015 21:18:38 - INFO - Preparing files for flashing
28/018/2015 21:18:46 - INFO - Device connected in flash mode
28/018/2015 21:18:49 - INFO - Please connect your device into flashmode.
28/018/2015 21:18:50 - INFO - Opening device for R/W
28/018/2015 21:18:51 - INFO - Reading device information
28/018/2015 21:18:51 - INFO - Phone ready for flashmode operations.
28/018/2015 21:18:51 - INFO - Opening TA partition 2
28/018/2015 21:18:51 - INFO - Current device : R800i - CB5A1GRDQV - 1247-6176_R9D - 1245-8821_4.0.1.C.1.21 - WORLD-1-8_4.0.2.A.0.69
28/018/2015 21:18:51 - INFO - Closing TA partition
28/018/2015 21:18:51 - INFO - Start Flashing
28/018/2015 21:18:51 - INFO - Processing loader.sin
28/018/2015 21:18:51 - INFO - Checking header
28/018/2015 21:18:51 - ERROR - Processing of loader.sin finished with errors.
28/018/2015 21:18:51 - INFO - Ending flash session
Click to expand...
Click to collapse

Kernel colonel said:
mattnmag said:
I don't have a R800i. I have the R800x, so I will probably be little help.
yes i am using Androxyde's Flashtool
And the log is
28/018/2015 21:18:38 - INFO - Selected Bundle for SonyEricson Xperia Play (R800i). FW release : 4.0.2.A.0.62. Customization : (1253-4437)
28/018/2015 21:18:38 - INFO - Preparing files for flashing
28/018/2015 21:18:46 - INFO - Device connected in flash mode
28/018/2015 21:18:49 - INFO - Please connect your device into flashmode.
28/018/2015 21:18:50 - INFO - Opening device for R/W
28/018/2015 21:18:51 - INFO - Reading device information
28/018/2015 21:18:51 - INFO - Phone ready for flashmode operations.
28/018/2015 21:18:51 - INFO - Opening TA partition 2
28/018/2015 21:18:51 - INFO - Current device : R800i - CB5A1GRDQV - 1247-6176_R9D - 1245-8821_4.0.1.C.1.21 - WORLD-1-8_4.0.2.A.0.69
28/018/2015 21:18:51 - INFO - Closing TA partition
28/018/2015 21:18:51 - INFO - Start Flashing
28/018/2015 21:18:51 - INFO - Processing loader.sin
28/018/2015 21:18:51 - INFO - Checking header
28/018/2015 21:18:51 - ERROR - Processing of loader.sin finished with errors.
28/018/2015 21:18:51 - INFO - Ending flash session
Click to expand...
Click to collapse
You've probably found this, but if not-- here is a link to a Guide for using Flashtool: http://forum.xda-developers.com/showthread.php?t=2054486
-Also ….you may want to post your question in the Flashtool thread for help, as it looks like Androxyde is available to answer questions: http://forum.xda-developers.com/showthread.php?t=920746
My knowledge of Flashtool is limited, but some basic ideas I would recommend include:
-Make sure that you are flashing the correct FTF for your device ( you can get Stock FTF firmware from here:
( http://forum.xda-developers.com/showthread.php?t=2184897 ). Go to post #2 under "OFFICIAL FIRMWARE (FTF'S)."
-Verify that you don't have a corrupted download of the FTF by verifying the MD5 (if you have Windows 7 or older—this is a good one to use-- http://winmd5.com/ ).
-Turn off antivirus software/firewalls when using Flashtool
-Run Flashtool as Administrator
-Maybe try a different version of Flashtool. If you're using a newer version, you might want to try an older version and vice-versa
-Try different USB cable and/or different USB port on your computer.
-If all else fails, uninstall Flashtool and all related drivers, reboot your PC, reinstall Flashtool and try again.
-You could also try Sony PC Companion as an alternative if you can't get Flashtool to work.
Good Luck!
Click to expand...
Click to collapse

mattnmag said:
Kernel colonel said:
You've probably found this, but if not-- here is a link to a Guide for using Flashtool: http://forum.xda-developers.com/showthread.php?t=2054486
-Also ….you may want to post your question in the Flashtool thread for help, as it looks like Androxyde is available to answer questions: http://forum.xda-developers.com/showthread.php?t=920746
My knowledge of Flashtool is limited, but some basic ideas I would recommend include:
-Make sure that you are flashing the correct FTF for your device ( you can get Stock FTF firmware from here: http://forum.xda-developers.com/showpost.php?p=43935357&postcount=2 ).
-Verify that you don't have a corrupted download of the FTF by verifying the MD5 (if you have Windows 7 or older—this is a good one to use-- http://winmd5.com/ ).
-Turn off antivirus software/firewalls when using Flashtool
-Run Flashtool as Administrator
-Maybe try a different version of Flashtool. If you're using a newer version, you might want to try an older version and vice-versa
-Try different USB cable and/or different USB port on your computer.
-If all else fails, uninstall Flashtool and all related drivers, reboot your PC, reinstall Flashtool and try again.
-You could also try Sony PC Companion as an alternative if you can't get Flashtool to work.
Good Luck!
Click to expand...
Click to collapse
Thanks much I'll take in all this information and get back to you
Click to expand...
Click to collapse

Op
Have exhausted all of your suggestions (I couldn't post in the flashertool forum due to age of account) and am still having the same error. I was wonder if there is another flasher program that isn't used anymore I can try or a way to just change the kernel so I can get into Recovery mode?

Kernel colonel said:
Have exhausted all of your suggestions (I couldn't post in the flashertool forum due to age of account) and am still having the same error. I was wonder if there is another flasher program that isn't used anymore I can try or a way to just change the kernel so I can get into Recovery mode?
Click to expand...
Click to collapse
You can probably find an older version of Flashtool using Google search... just be careful to try to get it from a reputable source like an XDA member and verify the MD5/use your virus scanner to check it as well when downloading.
You can also try using fastboot commands to wipe and flash another kernel. Check out this tutorial on fastboot from XDA Recognized Contributor demkantor:
http://forum.xda-developers.com/showthread.php?t=2277112.
You said you tried everything suggested above.. so I'm assuming that you also tried Sony PC Companion as well which is found here: http://support.sonymobile.com/global-en/tools/pc-companion/.

op
mattnmag said:
You can probably find an older version of Flashtool using Google search... just be careful to try to get it from a reputable source like an XDA member and verify the MD5/use your virus scanner to check it as well when downloading.
You can also try using fastboot commands to wipe and flash another kernel. Check out this tutorial on fastboot from XDA Recognized Contributor demkantor:
http://forum.xda-developers.com/showthread.php?t=2277112.
You said you tried everything suggested above.. so I'm assuming that you also tried Sony PC Companion as well which is found here: http://support.sonymobile.com/global-en/tools/pc-companion/.
Click to expand...
Click to collapse
I did try the pc companion (if by that you mean I asked it to "repair" my OS back to stock (didn't work) ) no software available.
As far as going through fastboot and running android studio I kinda got lost in what it was telling me. (maybe im a dummy ) Unless someone has any other advice I think I'm just gonna buy a new one and start from scratch. I feel it would be easier to start from stock kernel then dealing with whatever random one is installed now, it seems to have no recovery at all.
Thanks much for the advice through this ordeal mattnmag I'm sure it was a little frustrating dealing with someone brand new to phones.

Flashtool .fsc

Anyone with XA1 Ultra, little time and not afraid to lose data here?
Could You create .fsc script for Flashtool? It will be useful for many people.
http://www.flashtool.net/fsccreate.php

ch3mn3y said:
Anyone with XA1 Ultra, little time and not afraid to lose data here?
Could You create .fsc script for Flashtool? It will be useful for many people.
http://www.flashtool.net/fsccreate.php
Click to expand...
Click to collapse
I was trying to create .fsc script for flashtool, but it seems we need a device with bootloader lock to proceed the process. Since we can't use Flashtool without .fsc script. And I am unsure about EMMA Sony flash tool? Will this work to flash back a stock firmware? I need to flash a stock firmware.

Yeah. For fsc script it has to be log from Xperia Companion and it needs locked bootloader.
To flash back stock You can use Flashtool, modified properties file (to match XA1 Ultra) and XA1 fsc script. Like with XA and XA Ultra this devices are identical even with firmware - only difference is elabel.sin primary name (form before the flashtool packs it to .ftf),what's not a problem and size of the system.sin and that's not a problem also.
I would still like to have fsc script created for XA1 Ultra log, but there is a way to use Flashtool with this device.

ch3mn3y said:
Yeah. For fsc script it has to be log from Xperia Companion and it needs locked bootloader.
To flash back stock You can use Flashtool, modified properties file (to match XA1 Ultra) and XA1 fsc script. Like with XA and XA Ultra this devices are identical even with firmware - only difference is elabel.sin primary name (form before the flashtool packs it to .ftf),what's not a problem and size of the system.sin and that's not a problem also.
Click to expand...
Click to collapse
Thanks for the info. So I need to modify the one which is already created. I can see there is one for XA1 (G31xx.properties)..I have to modify only the G31xx.properties to match XA1 ultra. Right?
It seems I have to only replace the G31xx to G32xx (G3221 which is XA1-ULTRA).. Should I also modify the 40.0.fsc? setLoaderConfig etc?

Changing the internaname is not enough, You need to change recognition, variant and realname, as well as names of file and folder.
I don't add .ta files, but their same as in XA1 so even with them there should be no problem to flash the firmware created using this fsc.
Attached You have one I use.

ch3mn3y said:
Changing the internaname is not enough, You need to change recognition, variant and realname, as well as names of file and folder.
I don't add .ta files, but their same as in XA1 so even with them there should be no problem to flash the firmware created using this fsc.
Attached You have one I use.
Click to expand...
Click to collapse
Ok Thank you. I will try later. I appropriate your help and thank you for your time.
Update: It works fine.

ch3mn3y said:
Changing the internaname is not enough, You need to change recognition, variant and realname, as well as names of file and folder.
I don't add .ta files, but their same as in XA1 so even with them there should be no problem to flash the firmware created using this fsc.
Attached You have one I use.
Click to expand...
Click to collapse
Hi i will try but anyway my flashtool dosent read the downloaded firmware and im using 0.9.23.2 by Androxyde. Any help? I have XA1 Ultra G3223 Thanks

Now reading posts in other thread with similar/same problem (https://forum.xda-developers.com/xa...lt-sources-t3622886/post73201147#post73201147) I need to ask: did You disabled auto sync in Flashtool? 0.9.18.6 and newer have it, but it works that way that it removes everything from "devices" folder and than redownloads what exist on the server. Than the "G32XX" folder can be removed too.

ch3mn3y said:
Now reading posts in other thread with similar/same problem (https://forum.xda-developers.com/xa...lt-sources-t3622886/post73201147#post73201147) I need to ask: did You disabled auto sync in Flashtool? 0.9.18.6 and newer have it, but it works that way that it removes everything from "devices" folder and than redownloads what exist on the server. Than the "G32XX" folder can be removed too.
Click to expand...
Click to collapse
@ch3mn3y Thanks SO MUCH that was it I had to deselected autosync and know flasher detects ftf file and is working. i also used your G32XX.zip File. Thanks again (I have XA1 Ultra G3223)

finally! I got rid of my carrier bloatware

I'm sure flashtool can't recognize G3226
But you can relock your phone(first reboot may crash) than restore it through PCC(Sony PC companion)
:angel:

Why not? G3226 is just a name and as partitions are set same as with other devices it can be easily flashed as long as any other F32XX device can be.

can't flash G3212
any solution
6/051/2018 18:51:27 - INFO - Flashtool Version 0.9.23.1 built on 11-01-2017 15:12:00
06/051/2018 18:51:27 - INFO - Executing search strategies to find proxy selector
06/051/2018 18:51:27 - INFO - No proxy found for IE. Trying next one
06/051/2018 18:51:27 - INFO - No proxy found for firefox. Trying next one
06/051/2018 18:51:27 - INFO - No proxy found for java. Trying next one
06/051/2018 18:51:27 - INFO - Loading devices database
06/051/2018 18:51:27 - INFO - Loaded 101 devices
06/051/2018 18:51:27 - INFO - Starting phone detection
06/051/2018 18:51:32 - INFO - Device disconnected
06/051/2018 18:51:41 - INFO - Selected Bundle for Sony Xperia XA1 Ultra(G3212). FW release : 42.0.A.4.153. Customization : Customized FR
06/051/2018 18:51:41 - INFO - Preparing files for flashing
06/052/2018 18:52:19 - INFO - Please connect your device into flashmode.
06/052/2018 18:52:25 - INFO - Device connected in flash mode
06/052/2018 18:52:25 - INFO - Opening device for R/W
06/052/2018 18:52:25 - INFO - Reading device information
06/052/2018 18:52:25 - INFO - Phone ready for flashmode operations.
06/052/2018 18:52:25 - INFO - Opening TA partition 2
06/052/2018 18:52:25 - INFO - Current device : G3212 - RQ3004GUQ9 - 1309-0346_R2A - 1306-6287_42.0.A.1.69 - GENERIC_42.0.A.1.69
06/052/2018 18:52:25 - INFO - Closing TA partition
06/052/2018 18:52:25 - INFO - Start Flashing
06/052/2018 18:52:25 - INFO - No loader in the bundle. Searching for one
06/052/2018 18:52:25 - INFO - No matching loader found
06/052/2018 18:52:25 - WARN - No loader found or set manually. Skipping loader
06/052/2018 18:52:25 - INFO - Loader : S1_Root_4a6c - Version : S1_Boot_MT6757_N0.MP103_120 / Boot version : S1_Boot_MT6757_N0.MP103_120 / Bootloader status : ROOTABLE
06/052/2018 18:52:25 - INFO - Max packet size set to 8M
06/052/2018 18:52:25 - INFO - USB buffer size set to 512K
06/052/2018 18:52:26 - INFO - Parsing boot delivery
06/052/2018 18:52:26 - INFO - No flash script found.
06/052/2018 18:52:26 - INFO - Flash script is mandatory. Closing session
06/052/2018 18:52:26 - INFO - Ending flash session
06/052/2018 18:52:26 - INFO - Flashing finished.
06/052/2018 18:52:26 - INFO - Please unplug and start your phone
06/052/2018 18:52:26 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
06/052/2018 18:52:27 - INFO - Device connected in flash mode

@faridmax
You need .fsc script for XA1 Ultra. Flashtool officially doesn't have one unfortunately.
Launch Flashtool, then disable AutoSync of Devices (Devices->Devices Sync->Auto Sync->Off).
Download this: https://drive.google.com/file/d/0B8TQwRMBc_z_bE9xRkRIRi1NWWM/view?usp=drive_web
Unpack and put folder named G32XX to /Flashtool/devices.
Launch Flashtool again and flash the firmware.
If anyone needs .fscs for XA1 Ultra, XA1 Plus, Touch or Hello! (or any other Xperia except XZ Premium, XZ1 and XZ1 Compact), just PM me.

im having same problem and message, i have put the unpacked G32XX folder in devices but it says no fsc, fsc mandatory. all im trying to do is relock the bootloader.

ch3mn3y said:
@faridmax
You need .fsc script for XA1 Ultra. Flashtool officially doesn't have one unfortunately.
Launch Flashtool, then disable AutoSync of Devices (Devices->Devices Sync->Auto Sync->Off).
Download this: https://drive.google.com/file/d/0B8TQwRMBc_z_bE9xRkRIRi1NWWM/view?usp=drive_web
Unpack and put folder named G32XX to /Flashtool/devices.
Launch Flashtool again and flash the firmware.
If anyone needs .fscs for XA1 Ultra, XA1 Plus, Touch or Hello! (or any other Xperia except XZ Premium, XZ1 and XZ1 Compact), just PM me.
Click to expand...
Click to collapse
before my first post, i have already do all steps you have described here
my first problem the Flashtool does not recognize G3212 Firmware, after reinstall it and disabled autoSync and add G32XX folder, the software detect firmware but does not found Loader

@faridmax
It won't find one. There is no loader since change from Z to X series. But it's not necessary anymore.

ch3mn3y said:
@faridmax
It won't find one. There is no loader since change from Z to X series. But it's not necessary anymore.
Click to expand...
Click to collapse
i have try in other PC,
but same problem perhaps G3212 is not supported by your G32xx file

G3212 is added into properies file and .fsc is universal. I had already created many .ftfs using this foiles and never heard that they don't work (and they were at least downloaded few tims each, so I consider they were used).

ch3mn3y said:
Changing the internaname is not enough, You need to change recognition, variant and realname, as well as names of file and folder.
I don't add .ta files, but their same as in XA1 so even with them there should be no problem to flash the firmware created using this fsc.
Attached You have one I use.
Click to expand...
Click to collapse
Just thought on passing by to thank you sir. I just got this device and was getting crazy to get rid of bloatware. With the script and instructions you provided I could do it flawlessly! Thank you once again!