I got an error message at restoring Backup Rom.
E: format_volume: no MTD partition "userdata"
Error while formatting /data!
Click to expand...
Click to collapse
Please let me know how to resolve this error.
Thanks in advance.
Need more info!
Why are you restoring?
Are you restoring same rom thats on it now?
What are you using to restore the rom?
any other info you think might be helpful!!
Sounds like it is unable to mount the data partition, if your using cwm try mounting data partition before trying restore. The partition has to be at least the same size as the original rom you made the backup from, Were you using any a2sd scripts?
etc..
I'm very sorry for not giving you full information, I'm a beginner.
1. Why are you restoring?
I installed cm9 fxp126 and - LT18i_4.1.B.0.431_(1254-2184).ftf, but this has some errors. So I troed to install Complete Xperia S Transformation - http://forum.xda-developers.com/showthread.php?t=1727506, but this could not boot, and reboot continuously.
2. I mounted data at cwm.
3. About "a2sd scripts", I don't understand what it is.
comocandle said:
I'm very sorry for not giving you full information, I'm a beginner.
1. Why are you restoring?
I installed cm9 fxp126 and - LT18i_4.1.B.0.431_(1254-2184).ftf, but this has some errors. So I troed to install Complete Xperia S Transformation - http://forum.xda-developers.com/showthread.php?t=1727506, but this could not boot, and reboot continuously.
2. I mounted data at cwm.
3. About "a2sd scripts", I don't understand what it is.
Click to expand...
Click to collapse
First install a fresh ftf.. Tats the base.. Then install your custom rom.. Then restart.. Then again go in recovery and flash xperia s apps. Read comments in the xperia s apps thread and make sure the zip is error free
Sent from SE Xperia arc s using tapatalk 2
arpith.fbi /
Thanks a lot!
I'll try again.
comocandle said:
I'm very sorry for not giving you full information, I'm a beginner.
1. Why are you restoring?
I installed cm9 fxp126 and - LT18i_4.1.B.0.431_(1254-2184).ftf, but this has some errors. So I troed to install Complete Xperia S Transformation - http://forum.xda-developers.com/showthread.php?t=1727506, but this could not boot, and reboot continuously.
2. I mounted data at cwm.
3. About "a2sd scripts", I don't understand what it is.
Click to expand...
Click to collapse
Don't know about the layout for that rom but its always good to format any partitions before attempting a restore. Its a possibility that you have changed the layout in your nand. Try to install the new rom again. Let us know
To restore you're backup you will have to reset the same partition layout on your nand to the way it was before.
Sent from my Nexus One using xda premium
I installed these files.
1. LT18i_4.1.B.0.431_BB72.ftf
2. fastboot.exe flash boot boot.img
3. cm-9.0.0-RC1-anzu.zip - fixed for camcord
4. gapps-ics-20120429-signed.zip
But still showing Android man's animation.
Please letme know how to boot my phone.
Thanks in advance.
Are you sure you are flashing the correct boot.img for the rom?
The kernel is not loading if it is stuck on the android logo!!
Related
You can find all the features and info here: http://goo.gl/B0qqW
===========Gingerbread GT-S5660M Stock Recovery===========
These are the things I changed:
Code:
default.prop (lifted security)
=======================
Changelog:
Code:
March.1.12 ~ Added Odin file
[B]===================[/B]
Feb.27.12 ~Major Update!
• Fixed All Recoveries's update-binary
• Added Phiexz and Maclaw Roms compatible Recoveries [B](Only Flash if you are flashing their ROMS)[/B]
• My Recoveries named: [B](My Roms)[/B] are only compatible with [B]My Roms![/B]
[B]===========================[/B]
Feb.26.12 ~[B]Added CWM 5.0.2.6[/B]
Feb.26.12 ~Corrected CWM 5.0.2.7's [B]updater-script[/B]
Feb.23.12 ~[B]More Stable![/B]
Feb.12.12 ~Initial Release[/FONT][/SIZE]
Thanks to Darkshado for always giving me tips!
Thanks to Phiexz's for his hard work! (CWM credit to him)
(Phiexz & Maclaw Roms) ClockWorkMod Recovery Modded GIO.RLE ONLY:
px-CWM-v2.zip
ClockWorkMod 5.0.2.7 ext+rfs (Phiexz)
ClockWorkMod 5.0.2.6 No EXT Support (MORE STABLE THAN 5.0.2.7) (Hyriand)
(My Roms) ClockWorkMod Recovery Modded GIO.RLE & Build.prop ONLY:
ClockWorkMod 5.0.2.7 ext+rfs (Phiexz)
[ODIN]ClockWorkMod 5.0.2.7 ext+rfs [ODIN] (Phiexz)
ClockWorkMod 5.0.2.6 No EXT Support (MORE STABLE THAN 5.0.2.7) (Hyriand)
Stock Recovery
GT-S5660MUGKG3 Stock Recovery (Samsung and I )
READ READ READ:
Not every Installable zip can handle mount system, data & cache.
so you should mount it manually before flash them. mount menu can found on: Mount & Storage Menu
EXT4 FORMATTER (S5660M Mod) (Phiexz)
Galaxy Gio ext4 converter (Darkshado)
*Tested and working on my own Canada phone!
*All zips are signed*
can you help me about building a cwm recovery for i569?
Sent from my GT-S5660
Well for sure you need Linux. You also need a lot of space on your Drive.
Is it for Stock or Custom Rom (Like CM7)
Try checking this out: Build a custom kernel and [HOWTO] Build custom kernel, libraries and applications on your own
Make sure you're using the right/recommended toolchain but if you pulled directly from the AOSP repo then i guess that's not your problem.
thank you for cwm recovery for 5660m but when I try to clear dalvik cache it reset back to home screen
Peteragent5 said:
Well for sure you need Linux. You also need a lot of space on your Drive.
Is it for Stock or Custom Rom (Like CM7)
Try checking this out: Build a custom kernel and [HOWTO] Build custom kernel, libraries and applications on your own
Make sure you're using the right/recommended toolchain but if you pulled directly from the AOSP repo then i guess that's not your problem.
Click to expand...
Click to collapse
thank you my friend,i will learn it later!
Sent from my GT-S5660
zman4753 said:
thank you for cwm recovery for 5660m but when I try to clear dalvik cache it reset back to home screen
Click to expand...
Click to collapse
That means the Dalvik Cache is cleared even though it doesn't show it
Trust me.
Peteragent5
This customization is much appreciated however I still have two bugs:
1- I can’t mount the sd-ext (I’m using ext2 partition for link2sd); everything else were mounted correctly (cache, system, data and SD )
2- In the last step of backup I had an error when trying to generate the md5 sum (error while generating md5 sum!)
Any thoughts?
Thanks
-----------------------
Darkshado’s great Rom Already installed (ArpegGioMod ROM v0.8) on S5660M
1- Weird.. Try checking the original post and ask for help there or search your problem there
2- Did you try backing up just once or multiple times? Try backing up more than once. I had same problem even without my mods. But i tried what I said above and it works. If it still doesn't work ask in the original thread also and/or search on google
Peteragent5 said:
1- Weird.. Try checking the original post and ask for help there or search your problem there
2- Did you try backing up just once or multiple times? Try backing up more than once. I had same problem even without my mods. But i tried what I said above and it works. If it still doesn't work ask in the original thread also and/or search on google
Click to expand...
Click to collapse
Thank you for the quick response:
1- It's what I did but don't get any response yet.
2- I tried backup for multiple times but bug in the same step md5
Thanks
All right it seems like there's some Bugs with this modded cwm. I'll try to find the problem and fix it Thanks for posting bug
EDIT~
It seems when I Backup on my own phone (without any fix yet), it seems to work!? Keep in mind I also have no SD EXT.
Updated to much stable Recovery
Peteragent5 said:
Updated to much stable Recovery
Click to expand...
Click to collapse
The file on mediafire has the same name... Is this the updated one? Thanks.
koodiifin said:
The file on mediafire has the same name... Is this the updated one? Thanks.
Click to expand...
Click to collapse
Yes it is. Too lazy to rename
Changed file name.
mobilis2009 said:
Peteragent5
This customization is much appreciated however I still have two bugs:
1- I can’t mount the sd-ext (I’m using ext2 partition for link2sd); everything else were mounted correctly (cache, system, data and SD )
2- In the last step of backup I had an error when trying to generate the md5 sum (error while generating md5 sum!)
Any thoughts?
Thanks
-----------------------
Darkshado’s great Rom Already installed (ArpegGioMod ROM v0.8) on S5660M
Click to expand...
Click to collapse
Peteragent5,
I just tested Nandroid backup with your CWM and ArpegGioMod 0.8 and I also get "error while generating md5 sum!". I tried it multiple times.
You mentioned that it works on your phone, but were you testing it with an EXT4 base system or RFS?
Nandroid backup with your CWM on a Ext4 system worked fine for me, but not RFS.
koodiifin said:
Peteragent5,
I just tested Nandroid backup with your CWM and ArpegGioMod 0.8 and I also get "error while generating md5 sum!". I tried it multiple times.
You mentioned that it works on your phone, but were you testing it with an EXT4 base system or RFS?
Nandroid backup with your CWM on a Ext4 system worked fine for me, but not RFS.
Click to expand...
Click to collapse
I actually was testing on RFS lol
My backups work fine?
S5660=S5660M ?
[Sent to the mobile device Gio]
[aOS 2.3.7/CM7.2-RC2-B4 patch1]
Update again! View change log!
Change Log & Original Post
m.ali.ozkaya said:
S5660=S5660M ?
[Sent to the mobile device Gio]
[aOS 2.3.7/CM7.2-RC2-B4 patch1]
Click to expand...
Click to collapse
S5660!=S5660M
Use the search function, it's well documented you oafish troll.
Hi guys i have a samsung galaxy GIO ... i have a problem.
When i try to do format /data or davlik cache , i have this problem:
http://imagebin.org/207052
How to solve? Thank u
Is it rfs+ext4 variant of CWM? I remember switching to extonly after such issues. There's also a flashable ZIP around that formats everything - gio-all2ext4.
You can try.
Hi, i have flashed that .zip but the situation is the same... help please!!!
Maybe you could try v. 5.0.2.6. Everything works fine for me. Further ive no idea what to do :s
Sent from my GT-S5660 using xda premium
Thatgrass said:
Maybe you could try v. 5.0.2.6. Everything works fine for me. Further ive no idea what to do :s
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Can u paste link for downloadt CWM 5.0.2.6 for gio?
roxdragon said:
Can u paste link for downloadt CWM 5.0.2.6 for gio?
Click to expand...
Click to collapse
its in the cm7.1(!) thread, there you can still download px-cwm-v2.zip, it is v5.0.2.6
here it is:
http://www.mediafire.com/?p7r2bcn9447bpc8
however this version may give problems too, as this is the changelog from cwm v2:
Code:
New CWM v2
special thx to ZimniY
fix error mount command
remove rfs support
but also :
Code:
Based on particle's CWM Recovery, only add ext4 support for system, data & cache
\
but this one is working for me fine too, only sometimes after going from ext4 to rfs it gives problems, then flash 5.0.2.7 with ext4+rfs support..
roxdragon said:
Can u paste link for downloadt CWM 5.0.2.6 for gio?
Click to expand...
Click to collapse
The link from voetbalremco should be fine
Verstuurd van mijn GT-S5660
I haven't solved...
roxdragon said:
I haven't solved...
Click to expand...
Click to collapse
Rare problem.. ill think about a solution, good luck further!
Verstuurd van mijn GT-S5660
I'm without phone..
it's possible repair datapartition?
Heelp pleasee
i want try install stock recovery..
can you paste link of stock recovery and stock rom?
Thank you!
roxdragon said:
i want try install stock recovery..
can you paste link of stock recovery and stock rom?
Thank you!
Click to expand...
Click to collapse
Its at stock and clockworkmod recovery thread in development, cant copy link in app, let it FC..
Sent from my GT-S5660 using xda premium
Hi when i try "wipe data" or "format /data" i recive this error:
Wiping data...
Formatting / data...
Error mounting /data!
Skipping format...
I have tryed restore, i recive
E: format_volume: make_extf4fs failed on /dev/block/stl13
I can replace the file stl13 with that of a nexus S with ADB?
why? i have a CWM 5.0.2.7
Stock recovery and stock ROM are installed when you flash with Odin.
Files and folders in /dev are symbolic - they are created with Linux kernel's and services' startup. They cannot be copied and transferred.
Are you trying to restore ext4-based ROM within rfs+ext CWM? My experience says it's better to install ext-only CWM if you're going back to ext-based ROM.
Hi! i have CWM ext + rfs but i tryed flash ROM with Odin but don't work!
When i finish the flash ROM stock, i have connected my phone using ADB.
I have run:
"adb shell"
"cd system"
"ls -la"
but it's empty...
/data is empty ...
Why?
After you flash stock with Odin, "update" get's installed (the screen with opened paper box) and then it's stuck at bootlogo, you have to turn it off (quickest way: pull the battery off the phone) and turn it on in recovery mode (home + power button) and clean both data and cache to be sure. Then after reboot, stock will run.
If you want to switch back to ext-based ROM, install ext-only CWM (it will complain at startup about not being able to mount /cache), format all partitions (besides /sdcard and /sd-ext if you used it), mount /system and restore from backup.
It has to work.
Download CWM from phiexz - ext-only flashable from Odin.
I can't wipe data. I recive error:
E: format_volume: make_extf4fs failed on /dev/block/stl13
i have flash recovery ext only but i haven't solved
What have you exactly done that you messed it up so hard?
Tell me each thing you did. From the first, when you were still running stock.
I have flashed AOKP for Gio... it's OK... but after 30 minutes i have flashed a kernel...
i have run: wipe davlik and wipe cache partition...reboot and the phone goes in loop in the initial screen
I don't remember name of kernel... "delano-aokp-kernel"
Partition / data I think it is damaged
...
Quite strange to me what happenned. There are metods to repartition internal storage using GNU parted. I haven't ever tried it. I can't help you here. I only suspect something has tampered in partition table.
Hey guys,
I have a problem... :'(
I tried flashing (with cwmv5.0.2.6) either JellyBread and marcin's cm7.2 and both failed.
I did everything, I backupped all, i factoryresetted, i cleaned cache and dalvik cache.
I flashed it, it says it's succesful... Then i fixed the permissions.
But when i try to boot it up it is stuck at the JellyBread splashscreen of with cm7.2 the samsung one.
And it does NOTHING ! Well, the first time i tried to flash JellyBread it did create android.secure,
Lost&found and somthing else but that was it.
I can still boot in recovery so it's not hard-bricked or anything...
I tried restoring my nandroid backups: "Can't mount /system!". *OHNOES*
Did I just brick my device?????
I'm so desperate, i need my phone every day... OMG Hope it's not bricked!!!!!!!!
Please help... :'(
DevWithCookies
You need to first wipe everything and then format your file system to ext4. Our gio has rfs file system. Custom Roms require ext4.
First Flash This Recovery
Then Flash This ext-4 formatter
Then flash any ROM
Reply if it worked
no your phone is not bricked
so first wipe /system /data /cache and /sd-ext (but NOT /sdcard) then flash the rom and DON'T set the permission. Reboot your phone and everything should work
btw: you can't restore the backup of a stock-rom because of different file systems...
Sent from my GT-S5660 using xda app-developers app
IT WORKED
deadly46, you saved my day !
I couldn't sleep last night thinking about my bricked (i thought) phone...
I indeed forgot to format it to ext-4.
Thanks dude !
DevWithCookies said:
deadly46, you saved my day !
I couldn't sleep last night thinking about my bricked (i thought) phone...
I indeed forgot to format it to ext-4.
Thanks dude !
Click to expand...
Click to collapse
No Problem.....I'm glad i helped.
same problem
hi there..... hi deadly46
im new in this forum but im not new in android :laugh:
i have the same problem with DevWithCookies( i have flashed 3 roms and the both 3 failed ( the same problem with DevWithCookies)
so can u plz explain for me what is the steps to do your explanation
plz tell me by Details:good:
like:
1-........
2-........
3...........
plz plz plz
and thx
Hey,
Since my thing worked now i can tell u too...
1) Backup all your apps with TitaniumBackup.
2) Backup all you messages with SMS Backup/Restore.
3) Backup all your contacts (by syncing them with your Google account).
4) Flash the cwm deadly46 posted.
5) Reboot into recovery and take a nandroid backup.
6) Copy all important stuff (or even better; your whole SD-card) to your computer.
7) Reboot into recovery and: do a factory reset, clear the dalvic-cache and clear the cache.
8) Run the ext-4 formatter deadly46 posted.
9) Copy all zip files needed for the flash to your sd-card.
10) Flash them.
11) Do a factory reset, clear the dalvic-cache and clear the cache again.
12) Reboot and don't get scared when it doesn't boot withing a minute, the first time always takes a while, but it can never
take more than 5 minutes (I read).
13) Login with your google account.
14) Install TitaniumBackup and SMS Backup/Restore and restore everything you need.
And your good to go!
This is all i did and well thanks to deadly for showing me what to do; it worked !
DevWithCookies said:
Hey,
Since my thing worked now i can tell u too...
1) Backup all your apps with TitaniumBackup.
2) Backup all you messages with SMS Backup/Restore.
3) Backup all your contacts (by syncing them with your Google account).
4) Flash the cwm deadly46 posted.
5) Reboot into recovery and take a nandroid backup.
6) Copy all important stuff (or even better; your whole SD-card) to your computer.
7) Reboot into recovery and: do a factory reset, clear the dalvic-cache and clear the cache.
8) Run the ext-4 formatter deadly46 posted.
9) Copy all zip files needed for the flash to your sd-card.
10) Flash them.
11) Do a factory reset, clear the dalvic-cache and clear the cache again.
12) Reboot and don't get scared when it doesn't boot withing a minute, the first time always takes a while, but it can never
take more than 5 minutes (I read).
13) Login with your google account.
14) Install TitaniumBackup and SMS Backup/Restore and restore everything you need.
And your good to go!
This is all i did and well thanks to deadly for showing me what to do; it worked !
Click to expand...
Click to collapse
So if you already flashed stuff etc. continue from step 7.
Thx very much
But when I flash the ext4 .. should I click on reboot system now ,then I go to cwm recovery and flash the rom??
Or should I flash the ext4 then flash the rom then reboot my phone??
Plz help ... I will flash a rom right now
Reply for me plz plz...
Sent from my GT-S5660 using Tapatalk 2
---------- Post added at 08:01 PM ---------- Previous post was at 07:45 PM ----------
Plz plz plz plz heeeelllllllp
When I see the roms in internet ... I should to be surprised but
It doesn't work in my gio
So plz heellp
I wanna to flash a rom ... or I will be the most famous loser in technology :thumbdown::thumbdown:
Sent from my GT-S5660 using Tapatalk 2
you don't need to reboot your phone after flashing the ext4 formater afaik but you can do it if it's not working
Sorry for my bad englisch
Thx I'll try it and I will post reply
But not now cuz its now12:10 : )
I'll go to sleep right now
Sent from my GT-S5660 using tapatalk 2
samgio said:
Thx I'll try it and I will post reply
But not now cuz its now12:10 : )
I'll go to sleep right now
Sent from my GT-S5660 using tapatalk 2
Click to expand...
Click to collapse
here in germany is it 20:30 right now...
good night
Sorry for my bad englisch
Okay, this error have been annoying me the whole day. I have a Xperia SL rooted with .55. Everything was working completely great. Today I just tryied to restore a backup with CWM recovery, and I got this error.
Code:
E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p12
I can't wipe data and I can't install any MOD or ROM properly because of that.
The most strange thing is that I don't even have a ext sd slot. I don't know why I'm getting this error.
I've been searching for fixes and all I got was completely random fixes from people that mostly doesn't even know how did they fix it. Even though, those doesn't work for me.
* I figured out that when I go on FORMAT /DATA, after that, I can wipe data, and I can (re)install the room again without any error. The problem is after I reboot the system, the error comes back, and I need to format /data if I want to install anything again without errors.
Try flash .ftf with flashtool. Wipe all.
Sent from my LT26i using Tapatalk 2
drixjp said:
Okay, this error have been annoying me the whole day. I have a Xperia SL rooted with .55. Everything was working completely great. Today I just tryied to restore a backup with CWM recovery, and I got this error.
Code:
E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p12
I can't wipe data and I can't install any MOD or ROM properly because of that.
The most strange thing is that I don't even have a ext sd slot. I don't know why I'm getting this error.
I've been searching for fixes and all I got was completely random fixes from people that mostly doesn't even know how did they fix it. Even though, those doesn't work for me.
* I figured out that when I go on FORMAT /DATA, after that, I can wipe data, and I can (re)install the room again without any error. The problem is after I reboot the system, the error comes back, and I need to format /data if I want to install anything again without errors.
Click to expand...
Click to collapse
Wrong section. Questions don't belong in the General Section. As for your problem, the best solution would be to just flash a stock ftf as mentioned by m1st3r1
m1st3r1 said:
Try flash .ftf with flashtool. Wipe all.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
I tryed that thousands of time already and no lucky. I wanna try to format(fat32) it using my computer. The problem is that my computer doesn't recognize my cellphone as a external hard drive. I can read the files inside but it's still being detected as a celphone. And like that I can't use my hard drive tools on it.
Sent from my LT26ii using xda app-developers app
drixjp said:
I tryed that thousands of time already and no lucky. I wanna try to format(fat32) it using my computer. The problem is that my computer doesn't recognize my cellphone as a external hard drive. I can read the files inside but it's still being detected as a celphone. And like that I can't use my hard drive tools on it.
Sent from my LT26ii using xda app-developers app
Click to expand...
Click to collapse
why you wanna try to format in PC? if u format (regularly) in PC , it will only format your sdcard (mnt\sdcard). the mmcblk0p12 is the \system partition. u need to somehow format it first, via fastboot, or try via cwm to format \system.
and give more explanation bout the condition of your phone.. ie: rom, kernel, locked/unlocked bootloader.
i too, once, messed up my \data partition (which it's mmcblk0p14). i fixed that by using fastboot
m1st3r1 said:
why you wanna try to format in PC? if u format (regularly) in PC , it will only format your sdcard (mnt\sdcard). the mmcblk0p12 is the \system partition. u need to somehow format it first, via fastboot, or try via cwm to format \system.
and give more explanation bout the condition of your phone.. ie: rom, kernel, locked/unlocked bootloader.
i too, once, messed up my \data partition (which it's mmcblk0p14). i fixed that by using fastboot
Click to expand...
Click to collapse
Like i said, it's a. 55 rooted with stock Rom. Boot loader unlock alowed: yes. I tryed every kind of fix in cwm already and nothing works.
Something I never tryed is via fastboot. How do I proceed with that?
Sorry, my android life just started yesterday, I don't have much knowledge
EDIT: Ok I solved. Actually it's not like a fix, it's just like putting a silver tape to handle the problem. For some reason I'm able to advance restore system backup via CWM recovery. Every time that I do that, my CWM recovery is fully functional again, i can install mod, rom, etc. But, when I reboot into system again, the problem comes back, but I can still use my android without any problems, I just can't install anything via CWM recovery. So basically, now, every time that I want to install something in recovery, first I need to advanced restore system, and than install the rom, mod or whatever. Than I backup again in case I want to install anything else in the future, to repeat the same procedure with the last backup.
I was just having some problems when I was trying to restore the system with a md5 missing error... something like that. I solved this problem by just creating a file.txt in the backup folder and than renamed it to nandroid.md5. Magically it was fixed.
Sent from my LT26ii using xda app-developers app
-By following this you can can increase /system space from default 800MB to 1.2GB/2GB
-You can flash gapps on CM ROMs without insufficient space issue.
-You can flash regular MIUI ROMs too,without any issue.
Statutory warning
*Repartition can kill your phone forever if anything goes wrong,so proceed with caution (and make sure you have at least 30% battery)
*This process would format your internal sdcard,backup its contents
*I'm not responsible If your phone dies during this procedure under any circumstances beyond control
Prerequisites:
1)Redmi 1s partition script_system space 1.2GB.zip/2GB.zip
2)Parted
3)Twrp v3.0.2-1.zip
4)Download and copy all these files to external sdcard
Procedure:
1)Flash Twrp recovery(incase if aren't already using it).
2)Boot in to Twrp--->Advanced--->File manager--->Browse to the location of file "parted"--->Select "parted"--->Copy File--->/sbin.
3)Now using Twrp File manager browse /sbin--->parted--->select parted--->chmod 755.
4)You can also use "aroma file manager" instead of Twrp file manager for copying "parted" to "/sbin" and changing it's permissions to 755.
5)In Twrp flash "Redmi 1s partition script_system space 1.2GB.zip/2GB.zip" and wait for the script to finish execution(recovery will reboot automatically once this process finishes).
6)In Twrp--->Wipe--->Advanced wipe--->Mark in "Dalvik/ART Cache"__"Cache"__"System"__"Data"__"Internal Storage"--->Swipe to wipe.
7)Reboot recovery.
8)Install your ROM(don't flash gapps now).
9)Back again to Twrp start screen select "Wipe"-->Advanced wipe-->select/mark "System"-->press "Repair or change file system(notice that size hasn't increased to 1.2GB/2GB)-->Resize file system.
10)Back(though size of partition appears unchanged, its actually increased to 1.2GB)-->Back>select/mark"System"-->Repair or change file system-->Notice size of partition increased.
10)Back to Twrp start screen and flash gapps,that's it.
Reset to default partition:
1)I am also giving link for flashabe script file "Reset to default partition.zip" for restoring default partition sizes.
2)Boot in to Twrp--->Advanced--->File manager--->Browse to the location of file "parted"--->Select "parted"--->Copy File--->/sbin.
3)Now using Twrp File manager browse /sbin--->parted--->select parted--->chmod 755.
4)You can also use "aroma file manager" instead of Twrp file manage for copying "parted" to "/sbin" and changing it's permissions to 755.
5)In Twrp flash "Reset to default partition.zip" and wait for the script to finish execution(recovery will reboot automatically once this process finishes).
6)In Twrp--->Wipe--->Advanced wipe--->Mark in "Dalvik/ART Cache"__"Cache"__"System"__"Data"__"Internal Storage"--->Swipe to wipe.
7)Reboot recovery.
8)that's it you are back to default partition.
PS:
1.Need for "Resizing System partition"(step 9) comes only with CM14.1(haven't tried other CM versions or other custom roms) no need to do that if you are flasing MIUI ROMs(i,e you can skip step 9 if you are flashing MIUI ROMs)
2.If you still need more System space or want to further modify partition table(only if you know what you are doing),you can edit "update-binary" file inside the zip as per your needs.
Credits:
1)forumber2_ Samsung Galaxy S III.
2)slst_for his valuable input.
3)owaisnaim & fefifofum Twrp for redmi 1s.
Downloads:
1)parted:https://drive.google.com/folderview?id=0B6_hhjS3nx4IU05yLVc2Mk9uOEk
2)Repartition script Redmi 1s_1.2GB system space:https://drive.google.com/folderview?id=0B6_hhjS3nx4IRkJFZzAtMjZEa2s
3)Repartition script Redmi 1s_2GB system space:https://drive.google.com/folderview?id=0B6_hhjS3nx4IRXlDZUU1cEJ3Smc
4)Reset to default partition:https://drive.google.com/folderview?id=0B6_hhjS3nx4IeGtXb0liazdLWVk
5)TWRP 3.0.2-1.zip:https://drive.google.com/folderview?id=0B6_hhjS3nx4IdzFHXzdfNXVCYm8
good work mate
Great tutorial! Have a some questions:
1. After successfully doing this, If I decided to full clean wipe system, data, cache, dalvik cache, internal storage, and format data, the size will be reset? Do I need to do all the steps again?
2. If I decided to go back in default partition size I just flash that to reset all the steps? Or there will be a steps to reset all I've done?
Thank you.
Sent from my HM 1SW using Tapatalk
vhick said:
Great tutorial! Have a some questions:
1. After successfully doing this, If I decided to full clean wipe system, data, cache, dalvik cache, internal storage, and format data, the size will be reset? Do I need to do all the steps again?
2. If I decided to go back in default partition size I just flash that to reset all the steps? Or there will be a steps to reset all I've done?
Thank you.
Sent from my HM 1SW using Tapatalk
Click to expand...
Click to collapse
no you just have to go to
wipe >mark on system>click repartition
go back you can see system size 1.2gb
after doing this can i flash latest twrp ?
vhick said:
Great tutorial! Have a some questions:
1. After successfully doing this, If I decided to full clean wipe system, data, cache, dalvik cache, internal storage, and format data, the size will be reset? Do I need to do all the steps again?
2. If I decided to go back in default partition size I just flash that to reset all the steps? Or there will be a steps to reset all I've done?
Thank you.
Sent from my HM 1SW using Tapatalk
Click to expand...
Click to collapse
1.You can do all the wiping as usual, size of partition wil stay as it is and won't get reset,but if you're flashing current version of cm14.1 again you need to resize "System" partition before flashing gapps.
2.You additionally need to change "System" partition too to F2FS and than to EXT4(like you do with "Data" partition),in case you're going back to default partition.
I forgot to mention point 2 in OP,I will now add this there
vinayak.ghimire said:
after doing this can i flash latest twrp ?
Click to expand...
Click to collapse
Ya you can.
and whats the size of userdata and cache partition ?
vinayak.ghimire said:
and whats the size of userdata and cache partition ?
Click to expand...
Click to collapse
Based upon the scenario, the only concern is the system partition coz newer or update partition is too large. Cache partition is ok because it only use as a temp file partition. The userdata partition is large as internal storage because it shared as the same partition. That is the good thing at xiaomi phones, data partition is large as long as you have space in internal storage.
Sent from my HM 1SW using Tapatalk
vinayak.ghimire said:
and whats the size of userdata and cache partition ?
Click to expand...
Click to collapse
Install diskinfo app and check
Thanks for the script. It will help us a lot in now and in future also.
I know, i am asking too much. I bet we all are from developers but I will be very glad if you can provide me link of flashable file of TWRP and philz recovery 6.55.
Thanks Loads.
Anyone have checked this tutorial working ??
I checked this tutorial working fine. Thanks for this awesome tip. Here the flash able zip of twrp
Here is screenshot
apoorvpandey41 said:
I checked this tutorial working fine. Thanks for this awesome tip. Here the flash able zip of twrp
Click to expand...
Click to collapse
Thanks mate appreciated.
Thanks man works perfectly fine. Awesome tutorial.
Guys please help me:
Today morning I reparationed my Redmi 1s as the Op said. it went successful. after using for 5hours I've found an update from CM. So I updated using CM UPDATER APP. after reboot I've lost my Google play store and Google app (after updating to todays CM update using CM UPDATER APP). When I went to see the system partition size, it's size went back to the default 782mb (around 782mb, I don't remember exact size).
I checked whether it is disabled or what in apps. But I can't find there also. I tried Show system apps and reset app preferences, but nothing showed them.
I tried to get them back (play store and Google app) by resizing the partition to 1.2 gb (wipe>advanced wipe> Mark system>change or resize partition>back> checked system partition size whether 1.2gb or not>wipe cache and dalvik cache> reboot to system). But nothing worked.
So please help me in getting them back. Please exclude solution such as factory reset or flash gaggs again.
Is anybody else also facing the same issue or it's just me?:crying::crying::crying:
freeshared said:
1.You can do all the wiping as usual, size of partition wil stay as it is and won't get reset,but if you're flashing current version of cm14.1 again you need to resize "System" partition before flashing gapps.
2.You additionally need to change "System" partition too to F2FS and than to EXT4(like you do with "Data" partition),in case you're going back to default partition.
I forgot to mention point 2 in OP,I will now add this there
Click to expand...
Click to collapse
please give detailed instructions to get back to default partition as i am not anymore able to flash any rom on my device. Sometimes it strucks at patching system image unconditionally and sometimes shows error 7 in twrp. And not even being able flash using adb sideload. Please give detailed instructions to revert back to default partition
sharathe100111 said:
please give detailed instructions to get back to default partition as i am not anymore able to flash any rom on my device. Sometimes it strucks at patching system image unconditionally and sometimes shows error 7 in twrp. And not even being able flash using adb sideload. Please give detailed instructions to revert back to default partition
Click to expand...
Click to collapse
1)Detailed instructions for returning back to default partitions are given in op under the sub header "PPS", nothing more to add to it,just follow as it is.
2)I myself havent faced any issues till now iam currently on cm14.1 6-12-2016 version
3)Saw your posts on cm41.1 thread too,so you're on latest twrp
but still facing error 7,If possible post a screenshot of error 7(coz it never happed for me)
4)coming to the issue at hand,could you able to mount cache,system and data partitions.In twrp go to wipe>>advanced wipe>>select "cache">>Repair/change filesystem and see if everything(regarding partition size)is ok there.
Then do same for system and data too and check how are those partitions,if possible post screenshots.
Post your relpy as soon as possible.
freeshared said:
1)Detailed instructions for returning back to default partitions are given in op under the sub header "PPS", nothing more to add to it,just follow as it is.
2)I myself havent faced any issues till now iam currently on cm14.1 6-12-2016 version
3)Saw your posts on cm41.1 thread too,so you're on latest twrp
but still facing error 7,If possible post a screenshot of error 7(coz it never happed for me)
4)coming to the issue at hand,could you able to mount cache,system and data partitions.In twrp go to wipe>>advanced wipe>>select "cache">>Repair/change filesystem and see if everything(regarding partition size)is ok there.
Then do same for system and data too and check how are those partitions,if possible post screenshots.
Post your relpy as soon as possible.
Click to expand...
Click to collapse
Thank you brother for your reply. Now i am on miui as i am not being able to go to CM14 anymore. But i can flash CM11. (it seems i can use only kitkat).
Here are the screenshots: for MOUNT, ADVANCED WIPE, CACHE, SYSTEM, DATA. And problem struck on patching system image unconditionally