Develop Bugs

Problem with flashing custom rom

Ive got this message in cwm when was restoring (jj's hybrid for locked bootloader): no app2sd partition found, any ideas?
Locked Bootloader Arc S.
When i want to format sd-ext --> same message.
Prince

Bump
Prince

That means that CWM didn't find a second partition in your SD card used by Link2SD.
Is it working fine, JJ ROM?

Im just wondering if i can flash it with this 'error'.
Prince

I presume jj's rom has app2ext built in, but it shouldn't affect the rom. But check on the rom thread.
sinkster©

I was asking, but no1 replied.
Prince

It will work. That "error" is just a check if a sd partition exists to make use of. Wont affect sysyem if missing.
Typed down from the sky with sexy LT15i

Thx then xd
Prince

hints that migh be helpful to prevent trouble when flashing custom roms & kernels
hi there,
i'm not entirely sure if this will help you but generally speaking i came made a few observations about the fact that some people, mostly repeatingly the same users, encounter problems with their custom roms and/or flashing them, while others don't, albeit they are using the same devices.
i myself use 3 different devices, all rooted and running on pac 4.3, always latest nightly, as there are GT-N7100 - GT-I9100 - Nexus 4
not to the point
a) other than most other users i usually clean cache and dalvik cache as well before and after flashing the new rom and/or new nightly
and never encountrer any problems except those which everybody, using the same rom and nightly encounters.
b) whenever i flash an totally different rom and/or upgrade and/or downgrade to another level of android os, i.e. from 4.2.2 to 4.3, i perform
a clean install, including not only a factory reset, but as well a format sd-card, format cache and format system etc., again i cannot proof
which of these steps make a or the differnce but however, i never have problems others than thosw which everyone has with a version.
c) when using cusome kernels and due to the fact that some roms come with a kernel included, as well as with a custom recovery included,
it is strongly recommended not to forget to flas the kernel again after each flashing the new rom. one good example ist dorimanx kernel
for GT-I9100 which will not boot into recovery and reluctantly boot at all after a new flash of a pac nightly without reflashing the kernel.
d) try to fix permissions on reboot instead of doing it from recovery. one reason is that not every recovery has this option and further i
found that when fixing permissions before the first boot after flashing a new rom, there might be bootloops, albeit i cannot explain exactly
why that should, but however, sometimes it's better to be on the safe sid.
e) try to run whether the lastes version of custom recovery for your device, and or the use the included custom recovery of the rom or the
kernel. this again is one thing that can help to avoid some unexpected and hard to explain bootproblems and/or fc's etc.
hope that i could give you some new ideas how to avoid trouble while using custom roms and other hacks

Pulkit_i21 said:
hi ...i need your help...i am also using xperia arc s (2.3.4), rooted. i tried to install ultimate HD 5 around 6-7 times from different ways, all instructions on internet i followed, in my arc but always it stuck on sony ericson logo and i need to flash it again and again....please help me..why i a, not able to install ultimate hd ..waiting for your reply thanks
Click to expand...
Click to collapse
You must use ICS kernel, either unlock bootloader and install custom ICS kernel, or first install/update to stock ICS and then follow the same method.

i already did 6 times
i already tried 6-7 time to install custom rom when it stuck on sony logo i flashed it with orignal stock rom and tried again but every times same problem arise. now i am not understanding where i missed
Someguyfromhell said:
You must use ICS kernel, either unlock bootloader and install custom ICS kernel, or first install/update to stock ICS and then follow the same method.
Click to expand...
Click to collapse

Pulkit_i21 said:
i already tried 6-7 time to install custom rom when it stuck on sony logo i flashed it with orignal stock rom and tried again but every times same problem arise. now i am not understanding where i missed
Click to expand...
Click to collapse
Kernel. You must use appropriate kernel!

Already tried
i already tried flashing kernel too.....and also in ultimate HD there are option of instaling with locked boot loader.................................i just want to install ultimate HD..........
Someguyfromhell said:
Kernel. You must use appropriate kernel!
Click to expand...
Click to collapse

Pulkit_i21 said:
i already tried flashing kernel too.....and also in ultimate HD there are option of instaling with locked boot loader.................................i just want to install ultimate HD..........
Click to expand...
Click to collapse
Did you install full ICS firmware with kernel prior installing Ultimate HD ROM?

yes
yes i did around 6 times after bootloot i goot in my androing so i flash 2.3.4 gingerbread ftf file again in it
Someguyfromhell said:
Did you install full ICS firmware with kernel prior installing Ultimate HD ROM?
Click to expand...
Click to collapse

Pulkit_i21 said:
yes i did around 6 times after bootloot i goot in my androing so i flash 2.3.4 gingerbread ftf file again in it
Click to expand...
Click to collapse
First install stock ICS firmware, Android 4.0.4 (4.1.B.0.587 or 4.1.B.0.431), and then install the custom ROM. Did you do it so? Can you write the file, which you used?

no..i flashed only base version 4.0.2.A
i always flash "LT18i_4.0.2.A.0.58(2.3.4)_HK" after every bootloop, i not tried to flash 4.1.B.587....few month before tried it to flash but i think it is not able to flash because of system partition is is less because of 4.0.2.................well benifit of installing upgraded rom "4.0.4 (4.1.B.0.587 or 4.1.B.0.431)" and are you sure after that i will able to install it..?
Someguyfromhell said:
First install stock ICS firmware, Android 4.0.4 (4.1.B.0.587 or 4.1.B.0.431), and then install the custom ROM. Did you do it so? Can you write the file, which you used?
Click to expand...
Click to collapse

[Q] Incredible 2 Bootloop and ROM Problems

Hey Guys Thank You For Taking A Look At My Thread.Lets Cut To The Chase.I Have A HUGE PROBLEM with my Replacement Incredible 2.I Rooted my phone with Tacoroot,and everything was fine.Flashed Condemed CM7.2 and started realizing i didn't like it as much,so i made a BACKUP just in case i wanted to return to the CM goodness.Went to TSMTrinity's Sense 2.1 Version 4.5 S,and here's where the problem started happening. After I set up everything on my Sense 2.1 ROM,i backed it up,the screen would get to the boot animation,get past the boot animation,id see my lock screen for 1 SECOND,and then it would start the bootup again.seeing as this was a problem,i WIPED All Cache and Factory Reset/Wipe Data on My Revolutionary Recovery.Then,I Restored the 2.1 Backup that i created and everything was fine again.Then again,i decided to Flash Mikrunny's Sense 3.5 ROM,which after i set up,worked fine,UNTIL YESTERDAY.I was driving in my car yesterday,listening to music on The STOCK HTC Music app on Sense 3.5,and the phone rebooted on its own.And it would not stop until i took the battery out.I got home,charged the battery for a bit,(shut down that is),then headed to recovery.I took out the SD card and rebooted the phone,but no luck.tried this rebooting process for an hour,until i decided to wipe cache and factory reset to my 2.1 ROM BACKUP.it works,but i just wanna know,am i doing something noobingly wrong when backing up and restoring roms? Also,i use Revolutionary's Backup,or I think its called Nandroid,to do backups and restores,and ROM MANAGER to edit their names and delete them.Also,an added side to his problem,when i boot to the Hboot screen,when it loads,for a few of the items it says,missing or wrong image.could that be the problem?? THANK YOU SO MUCH WHO REPLIES AND HELPS.:crying:

DroidUser_Wind said:
Hey Guys Thank You For Taking A Look At My Thread.Lets Cut To The Chase.I Have A HUGE PROBLEM with my Replacement Incredible 2.I Rooted my phone with Tacoroot,and everything was fine.Flashed Condemed CM7.2 and started realizing i didn't like it as much,so i made a BACKUP just in case i wanted to return to the CM goodness.Went to TSMTrinity's Sense 2.1 Version 4.5 S,and here's where the problem started happening. After I set up everything on my Sense 2.1 ROM,i backed it up,the screen would get to the boot animation,get past the boot animation,id see my lock screen for 1 SECOND,and then it would start the bootup again.seeing as this was a problem,i WIPED All Cache and Factory Reset/Wipe Data on My Revolutionary Recovery.Then,I Restored the 2.1 Backup that i created and everything was fine again.Then again,i decided to Flash Mikrunny's Sense 3.5 ROM,which after i set up,worked fine,UNTIL YESTERDAY.I was driving in my car yesterday,listening to music on The STOCK HTC Music app on Sense 3.5,and the phone rebooted on its own.And it would not stop until i took the battery out.I got home,charged the battery for a bit,(shut down that is),then headed to recovery.I took out the SD card and rebooted the phone,but no luck.tried this rebooting process for an hour,until i decided to wipe cache and factory reset to my 2.1 ROM BACKUP.it works,but i just wanna know,am i doing something noobingly wrong when backing up and restoring roms? Also,i use Revolutionary's Backup,or I think its called Nandroid,to do backups and restores,and ROM MANAGER to edit their names and delete them.Also,an added side to his problem,when i boot to the Hboot screen,when it loads,for a few of the items it says,missing or wrong image.could that be the problem?? THANK YOU SO MUCH WHO REPLIES AND HELPS.:crying:
Click to expand...
Click to collapse
1..update your recovery which is probly clockwork mod....i suggest you get your phone usable for a few minutes and go to 4ext.net and download and install that..its touch based recovery or also check out twrp if you want an alt if you dont like it
2....update your radio ...newest one can be found in the venom rom thread i think there are directions there http://forum.xda-developers.com/showthread.php?t=1953899
3.....wipe everything ....check out my wipe script in the dev section if you want max cleanification http://forum.xda-developers.com/showthread.php?t=2013242
4...flash what ever rom...if you like sense use viper i hear good things or check out my incredibly paranoid rom or all the other roms ..pick your poison

chillybean said:
1..update your recovery which is probly clockwork mod....i suggest you get your phone usable for a few minutes and go to 4ext.net and download and install that..its touch based recovery or also check out twrp if you want an alt if you dont like it
2....update your radio ...newest one can be found in the venom rom thread i think there are directions there http://forum.xda-developers.com/showthread.php?t=1953899
3.....wipe everything ....check out my wipe script in the dev section if you want max cleanification http://forum.xda-developers.com/showthread.php?t=2013242
4...flash what ever rom...if you like sense use viper i hear good things or check out my incredibly paranoid rom or all the other roms ..pick your poison
Click to expand...
Click to collapse
DUDE.THANK YOU so MUCH FOR REPLYING.Ill try what you told me tonight,and ill let you know how it goes down.thanks again chills.:good:

chillybean said:
1..update your recovery which is probly clockwork mod....i suggest you get your phone usable for a few minutes and go to 4ext.net and download and install that..its touch based recovery or also check out twrp if you want an alt if you dont like it
2....update your radio ...newest one can be found in the venom rom thread i think there are directions there http://forum.xda-developers.com/showthread.php?t=1953899
3.....wipe everything ....check out my wipe script in the dev section if you want max cleanification http://forum.xda-developers.com/showthread.php?t=2013242
4...flash what ever rom...if you like sense use viper i hear good things or check out my incredibly paranoid rom or all the other roms ..pick your poison
Click to expand...
Click to collapse
What OP wrote applies to me as well. I am looking for something better than aerovan's CM9 (which has been my DD), and thought I would give Viper a try. Without fail, bootlooping (which I could have guessed since I did tacoroot and this seems to be an issue with sense based roms).
That said, I tried steps 1 through 4 and the bootlooping stopped in Viper - it goes through startup and just shuts down before leaving the boot screen. One strange thing that I noticed is that the ICS Firmware/radio with Viper (which I loaded in CWM), wouldn't load in 4ext. Maybe I'll give paranoid a go if I can't resolve this bootlooping issue in Viper! I hope OP has better luck.

U don't flash radio in cwm..look for a how to.. can't explain I'm working sry
Sent from my Incredible 2 using xda app-developers app

I'm not as knowledgeable as Chilly, but a thought did occur to me. if the cm9 rom included a kernel on the flash and then you went to a sense based rom that didn't include a kernel that could cause a problem. I believe that I read that cm using a kernel that is asop based while sense roms use a different based kernel. You may check to see what kernel you have and then check for the recomended kernel for that rom and flash that kernel. don't forget to wipe.

Jasonp0 said:
I'm not as knowledgeable as Chilly, but a thought did occur to me. if the cm9 rom included a kernel on the flash and then you went to a sense based rom that didn't include a kernel that could cause a problem. I believe that I read that cm using a kernel that is asop based while sense roms use a different based kernel. You may check to see what kernel you have and then check for the recomended kernel for that rom and flash that kernel. don't forget to wipe.
Click to expand...
Click to collapse
All of the roms come with a kernel for our phone, but certainly, don't flash a sense kernel with aosp or vice versa after rom flash. Chilly is right. Flashing a newer radio should fix the problem and the radio is flashed with a PG32IMG.zip in the bootloader, not in the recovery.

gtdtm said:
All of the roms come with a kernel for our phone, but certainly, don't flash a sense kernel with aosp or vice versa after rom flash. Chilly is right. Flashing a newer radio should fix the problem and the radio is flashed with a PG32IMG.zip in the bootloader, not in the recovery.
Click to expand...
Click to collapse
Good call. When chilly said you don't flash kernels in recovery I hit my head. I flashed the radio, but now my challenge is getting back into recovery since I renamed the file and bootloader always finds it and wants to reboot or I load CM9 which stays on flash screen. I'll figure something out, maybe with adb. Thanks.

Power down, pop the sd out, boot to recovery, rename file, profit.

gtdtm said:
Power down, pop the sd out, boot to recovery, rename file, profit.
Click to expand...
Click to collapse
Didn't think of that. adb did the trick though. In business with VenomInc!
Thank you all.

digitalshepard said:
Didn't think of that. adb did the trick though. In business with VenomInc!
Thank you all.
Click to expand...
Click to collapse
good lucking going back to aosp lol

almost thesame problem
chillybean said:
U don't flash radio in cwm..look for a how to.. can't explain I'm working sry
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
i made a stupid mistake of flashing radio in recovery, in fact the radio is for Samsung at&t and now my phone vibrates it doesnt show htc quietly brilliant, only vibrates and orange light with black screen untill i pull out the battery... i was able to return to stuck and it can only boot if its connected to power, it doesn't read sd card while android is booted and in recovery to, only in bootloader it reads sd... error in mounting if i try to... i flashed RUU.exe 2.3.3 and 2 other RUUs for my droid inc 2 but it keeps vibrating... please help me!!! thanks

I made the same mistake when i first gained s-off for my dinc2. the thing with the venom rom tho is if you ever want to go back to aosp ull need to gets chill's anti-venom zip and flash it through recovery because doing a normal wipe wont do the trick. also a helpful trick that worked for me with roms if i ever start getting boot loops i go into recovery from the bootloader menu and i wipe the dalvik cache under advanced and then wipe the chache under mounts and storage and it always works like a charm for me. but ive also learned that you have to be careful which kernel you flash with the rom of your choice because not only will it cause lags if you happen to get past the boot animation to the main screen but in some cases it can cause breaks in your framework like your wifi data etc. im not an expert tho those are just suggestions that im familiar with because theyve already happened to me before. hope this helps in any way.

Please help. Think I have bricked it!

So, I was relocking my HOX in order to get the OTA JB update from carrier (H3G) in order to use the new Viper ROM.
All went well and managed this. Got re rotted and installed CWM ans Super SU.
However, I read that before installing the JB Viper ROM it was important to do a full wipe. Using CWM i did this. Specifically I did the wipe data/factory reset, wipe cache partition, wipe dalvik cache and format system.
Now my phone is stuck on the white HTC screen. Please help.
Thanks

You formatted system, which basically wiped the rom. Reflash and don't format system.
Sent from something that's BETTER THAN YOURS

You should probably read what bricking your phone means.
Sent from my HTC One X

And don't forget to flash the boot.img file !

Thanks for the quick response and apologies for the basic and wrongly termed questions. Just panicking a little.
How do i get the ROM and boot.img on to the fone? Because it sticks at the white screen the pc doesn't seem to detect it.
Last time i used a stock RUU and followed that process. Will i be able to flash the new Viper ROM instead?
thanks

The boot.img is supposed to be flashed from the PC. To get the Rom into the phone you need to go back to clockworkmod, go into mounts and storage and press the mount usb thing
Edit - to flash the boot.img find a thread about fastboot. Don't worry you'll get there

To get the ROM on the phone boot into cwm and GOTO mounts & storage
Then mount USB storage
It should now be detected as a drive on your PC and you can copy the ROM back over
Sent from my HTC One X using xda app-developers app

Thanks. I did as you guys suggested and was able to install the Viper ROM (used the tweaked stock kernel as recommended in the download).
So have a ROM now but I have no service with my carrier and when I try to connect to wifi it says 'error'. Have I missed or done something wrong?
Cheers

columbo67 said:
Thanks. I did as you guys suggested and was able to install the Viper ROM (used the tweaked stock kernel as recommended in the download).
So have a ROM now but I have no service with my carrier and when I try to connect to wifi it says 'error'. Have I missed or done something wrong?
Cheers
Click to expand...
Click to collapse
While installing the rom, did you choose at the kernel question to keep the stock kernel and modules
Sent from my GT-P5110 using xda app-developers app

Mr Hofs said:
While installing the rom, did you choose at the kernel question to keep the stock kernel and modules
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Got it resolved. I had used the tweaked kernel and assumed that this was not standard, so when asked about which kernel i was using i said it wasn't the viper one.
So i went back to basics and used the kernel that came with the ROM zip and just flashed both. Working fine now. The only question is whether I could have used the tweaked kernel and answered yes to using the viper version?
Thanks for your help. Felt like I have learned a fair bit in the last 12 hours though!

Well if you flashed a different custom kernel you can answer that with the question so it won't load the stock modules but backs up the custom modules from the custom kernel. This way it won't mess up functionality.
When you use a boot.img without it proper modules it can mess up those things you experienced. Hope i make my self clear

Mr Hofs said:
Well if you flashed a different custom kernel you can answer that with the question so it won't load the stock modules but backs up the custom modules from the custom kernel. This way it won't mess up functionality.
When you use a boot.img without it proper modules it can mess up those things you experienced. Hope i make my self clear
Click to expand...
Click to collapse
Ye, perfectly. cheers

Looking at this thread, makes me realize that there are still a lot of polite helpful guys out there :thumbup:
Sent from my Bladed One X. Blade v5.0.0 is here. Based on RUU and with OTA.

[Q] Right Way to Flash Custom ROMS / Kernels

hi... , after I upgraded my XAS from ICS to JB using Sony updater. I rooted and unlocked the bootloader and after it installed Cabratos Adv Stock kernel. however now I'm not sure the right way to install ROMS, why each one speaks to one different way (flashing boot.img or install using CWM ...) however I do not have the slightest idea what I'm doing ... someone help me

DvDwx. said:
hi... , after I upgraded my XAS from ICS to JB using Sony updater. I rooted and unlocked the bootloader and after it installed Cabratos Adv Stock kernel. however now I'm not sure the right way to install ROMS, why each one speaks to one different way (flashing boot.img or install using CWM ...) however I do not have the slightest idea what I'm doing ... someone help me
Click to expand...
Click to collapse
well for one you already flashed cobrato's kernel so you're ready to flash a stock based ROM like Trinity Vengeance...
if you want to flash an AOSP or CM based ROM like PACMAN or CM10.1 just download the ROM package, extract the boot.img that's inside the package, fastboot flash the boot.img, reboot to recovery [they already have their own recovery with the kernel], wipe data and cache and then flash the ROM package

if anyone knows the right way to install the Forzaferrileo Kernel v4 with Wifi Module (chmod 644) i thanks

DvDwx. said:
if anyone knows the right way to install the Forzaferrileo Kernel v4 with Wifi Module (chmod 644) i thanks
Click to expand...
Click to collapse
just fastboot flash boot the kernel..or you can also use flashtool, like i do :laugh:

I'm using the 2.9 ROM Trinity put this giving a monetary errors besides be draining the battery ... I would like to do something like we do on computers... make a master reset(Format) and give write new ROM... I have all CMW/TWDR BACKUPS before i start Modifing my XAS

... the wifi works fine flashing this way?

DvDwx. said:
... the wifi works fine flashing this way?
Click to expand...
Click to collapse
yes it should

4 years ago I modified my S.E. C905 ... I developed drivers (Audio / Display / Camera) however only 4 months I bought my XAS ... and I'm trying to recovery the lost time .. sorry for the english, brazilian here xD

what is the best installation configuration of Trinity 2.9 ROM (Acro S) with Kernel Forzaferrileo? better, what do you think best, the first rewrite. FTF .200 original and then install over the Trinity ROM?

DvDwx. said:
4 years ago I modified my S.E. C905 ... I developed drivers (Audio / Display / Camera) however only 4 months I bought my XAS ... and I'm trying to recovery the lost time .. sorry for the english, brazilian here xD
Click to expand...
Click to collapse
i think you mean you want to fully wipe everything in your phone and do a clean install?have you tried wiping data/factory reset and format partitions?

That's right, I want to make a Clean Install, even from scratch, see if some of the bugs disappear

DvDwx. said:
That's right, I want to make a Clean Install, even from scratch, see if some of the bugs disappear
Click to expand...
Click to collapse
bugs will always be there bro, what with all the modding and scripting that developers do on a ROM..you just have to find the right workarounds in my opinion

i really understand that... but this "bugs" about i'm saying is from based source(Installation conflicts)... i just will do a clean re-installing to be sure... maybe when sony release new Update some bugs disappear...
I'll do it tomorrow ... enough for today(1:10 AM here) ... Thanks for help me (I still have to re-format my PC today ... another thing is full of bugs)
...
If you can pass me the setup order to install the trinity ROM with Forzaferrileo kernel i will enjoy it
bye :highfive:

I have a doubt now ... to flash the. TFT file, making a clean re-installation, what i need wipe, format or do the factory restore? in what order?
and after that.. I'll have to do the root again? ... neither the unlock the bootloader? ...

DvDwx. said:
i really understand that... but this "bugs" about i'm saying is from based source(Installation conflicts)... i just will do a clean re-installing to be sure... maybe when sony release new Update some bugs disappear...
I'll do it tomorrow ... enough for today(1:10 AM here) ... Thanks for help me (I still have to re-format my PC today ... another thing is full of bugs)
...
If you can pass me the setup order to install the trinity ROM with Forzaferrileo kernel i will enjoy it
bye :highfive:
Click to expand...
Click to collapse
what i did when i flashed trinity was:
flash cobrato kernel
reboot to recovery
wipe data/factory reset and cache
flash trinity rom
reboot to system
if you wanna flash forzaferrarileo kernel after flashing the rom just fastboot flash it or use flashtool..i dunno if you can use forzaferrarileo kernel to flash the rom, but i beleive you can do so since it has cwm recovery already

Make sure you have the latest version of Flashtool.

[Q] HTC Wildfire S stuck on BOOT LOOP

Guys I need help, I have a rooted wildfire S and I flashed a few roms to check out but then when I used data2sd script on EQDKP 5.0 ROM for first time it started giving me this problem cuz every time I restart my phone except for the first restart suddenly after installing ROM) it get's into a boot loop between beats audio and HTC screen and keeps that up I tried everything I tryed using link2sd and disabled relink at boot options I changed roms but now pretty much all roms are doing the same problem except only LEWA ROM that works fine but I got tired of using nd want a sense ROM my kernel right now is 2.6.35.10 cake-gb-3.0-v1.2 at first I thought it was the data scripts but now I'm not using any data2sd kinda script and yet it has the same problem also if I pull out my battery during the loop and put it into recovery and reflash the ROM without any wipes then it starts working again until next boot :/ I also thought it might be some background processing going on so I let it run for like 6 hrs but no avail please help btw my phone is S-ON but bootloader is unlocked by HTC DEV site. PS. This is my first experience with an HTC.

Flash issues
Eagle.x2 said:
Guys I need help, I have a rooted wildfire S and I flashed a few roms to check out but then when I used data2sd script on EQDKP 5.0 ROM for first time it started giving me this problem cuz every time I restart my phone except for the first restart suddenly after installing ROM) it get's into a boot loop between beats audio and HTC screen and keeps that up I tried everything I tryed using link2sd and disabled relink at boot options I changed roms but now pretty much all roms are doing the same problem except only LEWA ROM that works fine but I got tired of using nd want a sense ROM my kernel right now is 2.6.35.10 cake-gb-3.0-v1.2 at first I thought it was the data scripts but now I'm not using any data2sd kinda script and yet it has the same problem also if I pull out my battery during the loop and put it into recovery and reflash the ROM without any wipes then it starts working again until next boot :/ I also thought it might be some background processing going on so I let it run for like 6 hrs but no avail please help btw my phone is S-ON but bootloader is unlocked by HTC DEV site. PS. This is my first experience with an HTC.
Click to expand...
Click to collapse
Which recovery are you using? And confirm your model (GSM/CDMA).
Btw, have you wiped data,cache and system before flashing a new rom?
Try out the marvellous rom and a different kernel

reply
criss_007 said:
Which recovery are you using? And confirm your model (GSM/CDMA).
Btw, have you wiped data,cache and system before flashing a new rom?
Try out the marvellous rom and a different kernel
Click to expand...
Click to collapse
1 I have gsm model
2 I'm using latest clockwork recovery
3 yes i have wiped
4 I think I've tried that but nothing tops EQDKP

Eagle.x2 said:
1 I have gsm model
2 I'm using latest clockwork recovery
3 yes i have wiped
4 I think I've tried that but nothing tops EQDKP
Click to expand...
Click to collapse
Bootloop can happen due to many reasons...wrong kernel, wrong gapps, rom is overclocked to name a few. Some roms are overclocked and this causes problems in some sets.
Try replacing the kernel files manually or flash a recommended kernel that is NOT overclocked.
I'm assuming you did the partitions as required(3 different partitions i think).

such a nube
criss_007 said:
Bootloop can happen due to many reasons...wrong kernel, wrong gapps, rom is overclocked to name a few. Some roms are overclocked and this causes problems in some sets.
Try replacing the kernel files manually or flash a recommended kernel that is NOT overclocked.
I'm assuming you did the partitions as required(3 different partitions i think).
Click to expand...
Click to collapse
Can you please suggest a kernel I'd really appreciate that and I'd prefer if you give me a quick guide too as I've never flashed a kernel before and no I only have 2 partitions one primary and one ext >< I'm sorry I'm such a nube

Eagle.x2 said:
Can you please suggest a kernel I'd really appreciate that and I'd prefer if you give me a quick guide too as I've never flashed a kernel before and no I only have 2 partitions one primary and one ext >< I'm sorry I'm such a nube
Click to expand...
Click to collapse
Try the wildfire s toolkit to flash the kernel and use minitool partition software to make the partitions as mentioned in the rom page

Stuck again
criss_007 said:
Try the wildfire s toolkit to flash the kernel and use minitool partition software to make the partitions as mentioned in the rom page
Click to expand...
Click to collapse
ughh there's no dl link on his forum >< or maybe I can't find it or maybe he took it down and about partitions I'll do that ^^ btw I'm using SmarassV2 and deadline if that makes a difference

toolkit
Eagle.x2 said:
ughh there's no dl link on his forum >< or maybe I can't find it or maybe he took it down and about partitions I'll do that ^^ btw I'm using SmarassV2 and deadline if that makes a difference
Click to expand...
Click to collapse
http://d-h.st/users/hasoon2000/?fld_id=2808
---------- Post added at 10:28 AM ---------- Previous post was at 10:09 AM ----------
Eagle.x2 said:
Can you please suggest a kernel I'd really appreciate that and I'd prefer if you give me a quick guide too as I've never flashed a kernel before and no I only have 2 partitions one primary and one ext >< I'm sorry I'm such a nube
Click to expand...
Click to collapse
And regarding help for flashing kernels and anything else, refer these threads:
http://forum.xda-developers.com/showthread.php?t=1325730
http://forum.xda-developers.com/showthread.php?t=2436684
http://forum.xda-developers.com/showthread.php?t=1680183
Please use the search feature before creating a thread though...most of these topics are already covered in the general section.