Develop Bugs

proper way to relock bootloader

i tried to relock the bootloader just now but it keeps on rebooting to hboot so i just unlock again and it booted fine albeit being factory reset.
so the question is, after i fastboot oem lock , what should i do to reboot it normally instead of reboot to hboot?
do i need to download RUU exe file and execute it?
i also re flash original recovery since i don't feel like using custom ROM for the time being, i just want to wait for official OTA.

If you want to go back totally stock, then yes just run the RUU again.
M.

It will not boot if you have custom rom installed and oem locked. Hence it keeps rebooting into bootloader with a some warning on the top.
Unlock it again to resume the boot and lose all the settings or run a ruu as suggested before me.
Sent from my iPad using Tapatalk HD

beware if you have a 1.28 based rom (or updated OTA) i dont think a 1.26 based RUU will work. I didnt for me, i had to flash CWM recovery again and a .zip with 1.28.
so we need a new RUU to get back to stock if we have updated hboot.

RUU Marvel S HTC Europe 2.26.401.3 Radio 47.23e.35.3038H 7.57.39.10M release 261695

RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe
http://www.filefactory.com/file/7c4y4xrx25w3
MD5: 02f5c589d6d2bb0cc8678c7b76f2951b
Source: http://forum.xda-developers.com/showthread.php?t=1335368 (Football)

....and just after I finally managed to get the ota installed

Hi,
i have S-ON, bootloader unlocked, root, 2.13.401.3
after this update 2.26.401.3 stay still bootloader unlocked?
EDIT: maybe i need S-OFF, not possibly update my mobile...

you need to relock the bl in order to install any ruu.
i had a hard time updating my phone to 2.26
if you take a look at the first thread for this update, the ota update, there are details for how to update to this version and still keep bl-nlocked and easily root

RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe
Can anyone send me this file not via filefactory? There are no free slots in there at all

I relock bl and try new RUU 2.26, but problem with flashing. Can you pls describe steps by steps how can is possibly update from 2.13 to 2.26 ? I'm S-ON
I have Rom with 2.26 but I want update radio too....
Sent from my HTC Wildfire S A510e using xda premium

http://forum.xda-developers.com/showthread.php?t=1679010
try the process in this thread, if you can't get it to work straight away, try using the method i used (thanks to rezo).
1 - install the ruu for 2.14.401.1
(http://www.mediafire.com/download.php?o6ox43q3taa33iu)
1.5 - if you can't do this because you already have the rom from 2.26 (but old radio etc), follow this tutorial so that you can go back to ruu 2.14.401.1
http://forum.xda-developers.com/showthread.php?t=1540952&highlight=downgrade
2 - use htcdev process (without ruu step) to unlock bootloader
3 - install cwm recovery by flashing this file (http://www.mediafire.com/download.php?1rdxmtpx26201or) via "fastboot flash recovery recovery(custom).img"
4 - put update.zip (http://www.mediafire.com/download.php?vycb7415nn9boct) on the root of your sd card and install from cwm recovery.
4.5 - if the update doesn't work (i.e. if you still get "triangle !" logo flash this file (http://www.mediafire.com/download.php?bqni648c46r5e44) via cwm and choose the option "supervision", then try the update again.
5 - after installation and first boot (take a while) boot back to cwm and flash this root.zip (http://www.mediafire.com/download.php?dumbffr3n8igau4)
you should now have the latest stock rom, latest hboot, latest radio, and be root.

What's different in this new update 2.26. ?

Hi guys
I'm trying to download this new ruu for 2 days now from "filefactory" an still: "no free slots"! Ca anyone help me to download this new ruu from other sites?
Thank's in advance!

my current software version is 2.14.401.2, what is the difference if i update to 2.26.401.3? Does it gives any improvement on the performance or battery life?
Thx...

Gloris said:
http://forum.xda-developers.com/showthread.php?t=1679010
try the process in this thread, if you can't get it to work straight away, try using the method i used (thanks to rezo).
1 - install the ruu for 2.14.401.1
(http://www.mediafire.com/download.php?o6ox43q3taa33iu)
1.5 - if you can't do this because you already have the rom from 2.26 (but old radio etc), follow this tutorial so that you can go back to ruu 2.14.401.1
http://forum.xda-developers.com/showthread.php?t=1540952&highlight=downgrade
2 - use htcdev process (without ruu step) to unlock bootloader
3 - install cwm recovery by flashing this file (http://www.mediafire.com/download.php?1rdxmtpx26201or) via "fastboot flash recovery recovery(custom).img"
4 - put update.zip (http://www.mediafire.com/download.php?vycb7415nn9boct) on the root of your sd card and install from cwm recovery.
4.5 - if the update doesn't work (i.e. if you still get "triangle !" logo flash this file (http://www.mediafire.com/download.php?bqni648c46r5e44) via cwm and choose the option "supervision", then try the update again.
5 - after installation and first boot (take a while) boot back to cwm and flash this root.zip (http://www.mediafire.com/download.php?dumbffr3n8igau4)
you should now have the latest stock rom, latest hboot, latest radio, and be root.
Click to expand...
Click to collapse
I have problem with install RUU, why?

Zlobizlob said:
I have problem with install RUU, why?
Click to expand...
Click to collapse
what is the error code?
things to remember when you flash an ruu :-
you should not have modified system files (except for root)
you should have stock recovery to start with
you may need to create gold card
you should be relocked bootoader
if you are already on a software number which is higher than the ruu you are trying to install, you may need to downgrade first, using the guide posted above.

Is there anyway without S-OFF to update the radio? I would rather not loose any data too. I've manage to update everything but the radio.

Stevk said:
Is there anyway without S-OFF to update the radio? I would rather not loose any data too. I've manage to update everything but the radio.
Click to expand...
Click to collapse
if you're s-off already, can't you just flash the radio.img?
don't quote me on that, i'm not s-off myself, so i'm not reallu 'up' on all the thigns you can do and how you do them. but i was under the impression that with s-off you can flash it same as you flash recovery.img or system.img?

Do I need to flash radio? Because my girlfriends WFS has been t-mobile branded so I think I'm not able to flash RUU without gold crad?
Is it possible to flash system.img and boot.img only? Or will there be conflicts with radio/ramdisk etc...
BL is unlocked and device is rooted atm!

I installed this RUU to my Wildfire S by this tutorial
Code:
http://forum.xda-developers.com/showthread.php?t=1540952
My phone had unlocked bootloader (via htcdev.com), Root, S-On and my Hboot version was 1.09.0099. When I was trying to install RUU I got ERROR 140(bad hboot version). So I used mentioned tutorial to downgrade hboot and then I install new RUU.
I downloaded RUU 2.26.401.3 from this site because on Football's FileFactory link are allways full slots.
Code:
http://narod.ru/disk/51502291001.c558c29e878e383684edd1a956d417fd/RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe.html
And there is a ZIP version if someone want
Code:
http://narod.ru/disk/51500892001.cf33d25826e44363856289cb11302527/PG76IMG%20-%20Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M.zip.html
Sorry for poor english.

Can anyone please upload the RUU to another server?
FileFactory is always overloaded. And the russian site is too slow to download from America. 3kbps gg.

Any issues unlocking BL and rooting this update? Any compelling reason to stay with 2.13.401.2/3?

Heritz said:
Can anyone please upload the RUU to another server?
FileFactory is always overloaded. And the russian site is too slow to download from America. 3kbps gg.
Click to expand...
Click to collapse
I can upload RUU from russian site. Choose on which file hosting server. I dont know which is good.

EDIT - I solved it.

[Q] Flashing Stock ROM Nandroid backup to return to stock for OTA update

Hey guys,
I have an HTC__044 device which is unlocked and running a custom ROM with a custom boot.img. I am wanting to restore the phone to stock ROM so I can download the JellyBean OTA.
I've seen the procedure for returning to stock RUU, but I am not sure on the procedure for when you have a full Nandroid backup of your stock ROM.
Could someone please clarify?
I understand it to be as follows:
1. Boot in to recovery and restore Nandroid backup of original ROM
2. Flash stock boot.img extracted from RUU via fastboot (or boot.img from backup directory on SD card)
3. Flash stock recovery via fastboot (or recovery.img from backup directory on SD card)
4. relock bootloader via fastboot
5. Reboot phone and stock ROM will be recovered
6. Download and install OTA.
Have I missed anything? Do you really need to flash back to stock recovery? I don't really see the point of doing that?
Thanks

Sentinel196 said:
Hey guys,
I have an HTC__044 device which is unlocked and running a custom ROM with a custom boot.img. I am wanting to restore the phone to stock ROM so I can download the JellyBean OTA.
I've seen the procedure for returning to stock RUU, but I am not sure on the procedure for when you have a full Nandroid backup of your stock ROM.
Could someone please clarify?
I understand it to be as follows:
1. Boot in to recovery and restore Nandroid backup of original ROM
2. Flash stock boot.img extracted from RUU via fastboot (or boot.img from backup directory on SD card)
3. Flash stock recovery via fastboot (or recovery.img from backup directory on SD card)
4. relock bootloader via fastboot
5. Reboot phone and stock ROM will be recovered
6. Download and install OTA.
Have I missed anything? Do you really need to flash back to stock recovery? I don't really see the point of doing that?
Thanks
Click to expand...
Click to collapse
U can try to relocked your bootloader and flashed the RUU for your device to return back to stock and waiting for JB updates.

Sentinel196 said:
Hey guys,
I have an HTC__044 device which is unlocked and running a custom ROM with a custom boot.img. I am wanting to restore the phone to stock ROM so I can download the JellyBean OTA.
I've seen the procedure for returning to stock RUU, but I am not sure on the procedure for when you have a full Nandroid backup of your stock ROM.
Could someone please clarify?
I understand it to be as follows:
1. Boot in to recovery and restore Nandroid backup of original ROM
2. Flash stock boot.img extracted from RUU via fastboot (or boot.img from backup directory on SD card)
3. Flash stock recovery via fastboot (or recovery.img from backup directory on SD card)
4. relock bootloader via fastboot
5. Reboot phone and stock ROM will be recovered
6. Download and install OTA.
Have I missed anything? Do you really need to flash back to stock recovery? I don't really see the point of doing that?
Thanks
Click to expand...
Click to collapse
Yeah, looks good to me.
You don't need to relock it if you're just going to apply the OTA.
To apply OTA, you need stock recovery.

Oh really? Cool!!
So I can just recover the NANDROID backup, and flash the boot.img then check it boots. then flash the stock recovery and download the OTA without re-locking?
I thought you had to lock the bootloader to get OTA updates as unlocked bootloader sets the CID to none, so no OTAs are detected, no?

Sentinel196 said:
Oh really? Cool!!
So I can just recover the NANDROID backup, and flash the boot.img then check it boots. then flash the stock recovery and download the OTA without re-locking?
I thought you had to lock the bootloader to get OTA updates as unlocked bootloader sets the CID to none, so no OTAs are detected, no?
Click to expand...
Click to collapse
I've never tried it, but as far as I know, you don't need to lock it, updates are based on IMEI, not CID, and although CID can show as all 1s in some places, fastboot oem readcid should return the correct one.
However it takes about 5 seconds to lock it and just a few more to unlock it, so... Your choice.

If you have the Stock RUU your device shipped with, just go in fastboot, connect to pc and run the RUU.exe.
If not, the steps in first post looks like a good route to flash back to your original ROM.

In my case it was shorter:
1. Restore nandroid backup (of the original ROM, did after root).
2. Fastboot oem lock
3. Run RUU
That's all.
You can try this too.
Regards.
Sent from my HTC One X using xda premium

jorjino2000 said:
In my case it was shorter:
1. Restore nandroid backup (of the original ROM, did after root).
2. Fastboot oem lock
3. Run RUU
Click to expand...
Click to collapse
Well, the OP didn't ask for the RUU method and said he was aware of it.
What's wrong with:
fastboot oem lock
Run RUU

smartzac said:
U can try to relocked your bootloader and flashed the RUU for your device to return back to stock and waiting for JB updates.
Click to expand...
Click to collapse
hello m using HOX And my device is running on CM 10 4.1.2 and i want back to stock like i buy phone from store and wan every official update automatically like i do when m running on stock rom so should i follow following steps is it correct or if i miss some. and i dnt want my device freeze or stuck in any stage so plz help me i have nanoroid backup
0.restore your nandroid backup from recovery
1.go to your sd card and grab the stock boot.img and recovery.img from the folder that contains the nandroid backup(clockworkmod)
2.flash both of them
3.enter your phone,use the app ota rootkeeper,and make a backup for your root,then select temporarily unroot..
4.reboot enter software updates...do the update thing..when it finishes
5.enter the app and select restore root
5.go to fastboot flash the recovery you like cwm or twrp

jimmy_135 said:
.......and i dnt want my device freeze or stuck in any stage so plz help me i have nanoroid backup
Click to expand...
Click to collapse
Before you do anything, the best thing to do is to check again what is the actual software version no.
Go to fastboot and type below command
fastboot getvar version-main
Tell us the no. written there
Then we talk about getting your ROM back to stock

ckpv5 said:
Before you do anything, the best thing to do is to check again what is the actual software version no.
Go to fastboot and type below command
fastboot getvar version-main
Tell us the no. written there
Then we talk about getting your ROM back to stock
Click to expand...
Click to collapse
my soft no is 3.14.707.24 CL128187
CID is HTC_044
plz help me guys
---------- Post added at 12:07 AM ---------- Previous post was at 12:00 AM ----------
ckpv5 said:
Before you do anything, the best thing to do is to check again what is the actual software version no.
Go to fastboot and type below command
fastboot getvar version-main
Tell us the no. written there
Then we talk about getting your ROM back to stock
Click to expand...
Click to collapse
my software version is 3.14.707.24 CL128187
my CID IS HTC_044
plz help me out of this m screwed from last 2 days

jimmy_135 said:
my software version is 3.14.707.24 CL128187
my CID IS HTC_044
plz help me out of this m screwed from last 2 days
Click to expand...
Click to collapse
Yours is same as mine, CID HTC__044 and 3.14.707.24
When reading your thread http://forum.xda-developers.com/showthread.php?t=2055377 I'm a little bit puzzled on why do you want to revert to stock as your device is already on JellyBean and there is no further OTA at the moment.
Here are three scenario that you may need to choose.
1) You just want to revert to stock ROM but you still need to root it.
a. Flash the stock boot.img attached here (That's the stock boot.img for 3.14.707.24)
b. Restore your nandroid backup
c. Reboot.. you are done .. you will have stock ROM but still on custom recovery in case you still need to play around like rooting the stock ROM or whatever you want to do.
2) You want to revert to stock ROM with everything complete stock with your nandroid backup.
a. Flash the attached stock boot.img
b. Restore your nandroid backup
c. Reboot to bootloader again
d. Flash the attached stock recovery.img (That's the stock recovery.img for 3.14.707.24)
e. Relock your bootloader with command "fastboot oem lock"
f. Reboot your device.. you are done.
3) You want to revert to stock with a RUU.
a) Download RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.exe from various site that you can it this thread http://forum.xda-developers.com/showthread.php?t=1543604 or you can download from where that I uploaded one : http://forum.xda-developers.com/showpost.php?p=34971176&postcount=2487
b) Put your device in fastboot mode and relock your bootloader with command "fastboot oem lock"
c) In fastboot mode too, run the RUU and follow the updater instruction - next- next-update-blablabla until it finish
d) Complete the setup wizard, you are done.

ckpv5 said:
Yours is same as mine, CID HTC__044 and 3.14.707.24
When reading your thread http://forum.xda-developers.com/showthread.php?t=2055377 I'm a little bit puzzled on why do you want to revert to stock as your device is already on JellyBean and there is no further OTA at the moment.
Here are three scenario that you may need to choose.
1) You just want to revert to stock ROM but you still need to root it.
a. Flash the stock boot.img attached here (That's the stock boot.img for 3.14.707.24)
b. Restore your nandroid backup
c. Reboot.. you are done .. you will have stock ROM but still on custom recovery in case you still need to play around like rooting the stock ROM or whatever you want to do.
2) You want to revert to stock ROM with everything complete stock with your nandroid backup.
a. Flash the attached stock boot.img
b. Restore your nandroid backup
c. Reboot to bootloader again
d. Flash the attached stock recovery.img (That's the stock recovery.img for 3.14.707.24)
e. Relock your bootloader with command "fastboot oem lock"
f. Reboot your device.. you are done.
3) You want to revert to stock with a RUU.
a) Download RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.exe from various site that you can it this thread http://forum.xda-developers.com/showthread.php?t=1543604 or you can download from where that I uploaded one : http://forum.xda-developers.com/showpost.php?p=34971176&postcount=2487
b) Put your device in fastboot mode and relock your bootloader with command "fastboot oem lock"
c) In fastboot mode too, run the RUU and follow the updater instruction - next- next-update-blablabla until it finish
d) Complete the setup wizard, you are done.
Click to expand...
Click to collapse
Thanks for ur quick reply forget about root in among them which is the safest method and i wan all update automatically....and i have boot.img and stockrecovery.img in my nanoroid back so can i use it and other thin i wan a gud battery life on my phone so what i do....

The recovery from your backup is not stock.

BenPope said:
The recovery from your backup is not stock.
Click to expand...
Click to collapse
so what should i do Benpope

jimmy_135 said:
so what should i do Benpope
Click to expand...
Click to collapse
You have to flash the stock recovery.....the nandroid is taken with a custom recovery so the stock recovery is not included in the nandroid .... therefore you need the stock one :thumbup:
This is the 3.14 stock recovery
http://db.tt/C1SWP2ZJ

MarcelHofs said:
You have to flash the stock recovery.....the nandroid is taken with a custom recovery so the stock recovery is not included in the nandroid .... therefore you need the stock one :thumbup:
This is the 3.14 stock recovery
http://db.tt/C1SWP2ZJ
Click to expand...
Click to collapse
Mate... I even attached the stock recovery and stock boot.img for him above. I don't know whether he really read those I wrote.
So Jimmy, if you want automatic update like the stock ROM as you said; read again item 2 or item 3.

ckpv5 said:
Mate... I even attached the stock recovery and stock boot.img for him above. I don't know whether he really read those I wrote.
So Jimmy, if you want automatic update like the stock ROM as you said; read again item 2 or item 3.
Click to expand...
Click to collapse
k buddy let i do with ur stock.img and recovery.img hope everythin work fine and i choose item no 2 thanks buddy and how to i maximize battery life of my HOX

Can't install update stock

so i just recently switched to my nandroid backup of the stock sense 4.1.1 original
but the problem i got an software update notification but when i tried to install it
and when the phone restarted i was already in cwm recovery , i read this thread http://forum.xda-developers.com/showthread.php?t=1859714
and the backup i had already is restored and the boot.img flashed so there is only one thing left is to lock the oem and then the updates will be installed am i right pls help cuz i want to stick to the stock rom and get updates now.

To be able to update official HTC updates you need
1. stock rom - you did that
2. flash boot.img - you did
3. flash stock recovery.img - you didnt do that, you still have CWM
You dont need to relock bootloader
Stock recovery.img you can find here http://forum.xda-developers.com/showthread.php?t=1957376 in firmware, but be aware that you need matching CID

hpnxfox said:
To be able to update official HTC updates you need
1. stock rom - you did that
2. flash boot.img - you did
3. flash stock recovery.img - you didnt do that, you still have CWM
You dont need to relock bootloader
Stock recovery.img you can find here http://forum.xda-developers.com/showthread.php?t=1957376 in firmware, but be aware that you need matching CID
Click to expand...
Click to collapse
so basicly all i need now is the HTC__032 Cid and then flash it via cmd "fastboot flash recovery recovery.img" or "fastboot flash zip firmware.zip" fand relock the oem ?

just found my recovery,img in clockworkmod in backups folder should i flash it now ? and then relock the bootloader ?lco
EDIT* : that didnt work either so i found out firmwares of cid 032 here http://d-h.st/gEo flashed them and was able to install the update with bootloader unlocked so see ya
Close the thread pls btw thanks in advance @hpnxfox

Edit : del del del

No recovery.... ?

Is it possible to have a working phone without a recovery installed ?
Unlocked bootloader, flashed twrp 3.0.1.0, phone wouldn't boot into recovery.
Relocked bootloader cause phone is s-on, ran 401 ruu but can't get into stock recovery but otherwise phone works ok
:banghead:

There is always a recovery installed. Either the stock one or the custom one. What does it do when you go to the recovery?

10rdan said:
Is it possible to have a working phone without a recovery installed ?
Unlocked bootloader, flashed twrp 3.0.1.0, phone wouldn't boot into recovery.
Relocked bootloader cause phone is s-on, ran 401 ruu but can't get into stock recovery but otherwise phone works ok
:banghead:
Click to expand...
Click to collapse
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.

jollywhitefoot said:
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
Click to expand...
Click to collapse
With s-on you need to relock the bootloader to use official signed ruu files. When he flashed the ruu he could be seeing the exclamation mark that is normal as a warning before entering the stock recovery for which you need to push a volume and power button combo (don't know them heads up)
A possibility is to clear the cache and try to enter again (as this was a thingy on older HTC devices) or indeed as suggested at least to use the latest twrp available

Mr Hofs said:
With s-on you need to relock the bootloader to use official signed ruu files. When he flashed the ruu he could be seeing the exclamation mark that is normal as a warning before entering the stock recovery for which you need to push a volume and power button combo (don't know them heads up)
A possibility is to clear the cache and try to enter again (as this was a thingy on older HTC devices) or indeed as suggested at least to use the latest twrp available
Click to expand...
Click to collapse
It doesn't get as far as red exclamation mark, that's what I was waiting for. I'll try the newer version of twrp tomorrow after I've unlocked bootloader again. Do you think the same unlock code will work again?

10rdan said:
It doesn't get as far as red exclamation mark, that's what I was waiting for. I'll try the newer version of twrp tomorrow after I've unlocked bootloader again. Do you think the same unlock code will work again?
Click to expand...
Click to collapse
Yes i think it does work again. But that's a try and find out. There is always the possibility i could be wrong.
Edit :
This is why i love s-off....no more relocking / unlocking the BL with also an increased chance of bricks. The BL isn't made to be relocked and unlocked over and over.

Mr Hofs said:
With s-on you need to relock the bootloader to use official signed ruu files.
Click to expand...
Click to collapse
Sorry, but I believe this is misinformation, possibly residual to older HTC devices. I've heard this going back to the M7.
You need to be s-off to flash in download mode, but s-on can flash signed firmware and ruu's in RUU mode. I'm s-off so I can't test at the moment, but I'm about 99% that my information is correct.
S-on, you can only flash same or newer, though. You can't flash older firmware.
See post 19 here:
http://forum.xda-developers.com/htc-10/how-to/unlocked-official-ruu-t3378540/page2
I'm 100% that you can flash signed firmware package in ruu mode with bootloader unlocked and s-on.

jollywhitefoot said:
Sorry, but I believe this is misinformation, possibly residual to older HTC devices. I've heard this going back to the M7.
You need to be s-off to flash in download mode, but s-on can flash signed firmware and ruu's in RUU mode. I'm s-off so I can't test at the moment, but I'm about 99% that my information is correct.
S-on, you can only flash same or newer, though. You can't flash older firmware.
See post 19 here:
http://forum.xda-developers.com/htc-10/how-to/unlocked-official-ruu-t3378540/page2
I'm 100% that you can flash signed firmware package in ruu mode with bootloader unlocked and s-on.
Click to expand...
Click to collapse
That's new to me. Hopefully it isn't just tied to the developers edition then.
Thanks for the information

Mr Hofs said:
This is why i love s-off....no more relocking / unlocking the BL with also an increased chance of bricks. The BL isn't made to be relocked and unlocked over and over.
Click to expand...
Click to collapse
I'll bare that in mind, will unlock tomorrow again and try newer twrp. Only reason I relocked was to run ruu to get phone running again.

jollywhitefoot said:
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
Click to expand...
Click to collapse
Where can I find 3.0.2.2, can only see 3.0.2.0 on twrp site?
Cheers
Edit.... Found it. ?

@jollywhitefoot
I've got stock recovery back on phone. Can you think of any reason, other than old version, as to why twrp wouldn't boot after flashing it ?
Will try again tomorrow.

10rdan said:
@jollywhitefoot
I've got stock recovery back on phone. Can you think of any reason, other than old version, as to why twrp wouldn't boot after flashing it ?
Will try again tomorrow.
Click to expand...
Click to collapse
I'm not exactly sure, but up until 3.0.2.2 Captain Throwback didn't even have the device and was working blind. I know he was trying different things to make it compatible with different variants, too, so in my mind that was a test build. I'm not sure why they have it on the downloads page. For me, I always download it from the download section of the twrp thread.