Anyone planning to get one of these cases for their S III or have experience with this case on other phones? I'm thinking about getting one since it covers all the purple accent on my "blue" S III. The case is a bit on the expensive side, but the soft touch rubber looks nice.
http://store.androidandme.com/seidio-surface-case/4A123A11781.htm
I usually order the surface case and holster combo. In fact it will be arriving Thursday. I will be glad to review it, but I have always been happy in the past.
Matrioux said:
I usually order the surface case and holster combo. In fact it will be arriving Thursday. I will be glad to review it, but I have always been happy in the past.
Click to expand...
Click to collapse
Awesome. What color SIII do you have and what color case did you get? Did you order directly off Seidio's website?
Looking forward to the review.
I had a surface case for my Captivate and that thing took a beating, in a good way.. Great case and it doesn't add too much bulk to the phone... Would recommend..
I'll prolly buy it only if my diatonic case I bought in black isn't to my kiking, but reviews showed its good
Sent from my SAMSUNG-SGH-I747 using xda premium
Ive already pre-ordered mine, i can't give a review for the S3 case because i wont have my phone until july 19th but i've had it for my thunderbolt and lemme tell you its great. Ive dropped this phone a few times even face first and thought it would be cracked the case absorbed it all. There's a little lip on the front of the phone so when it falls it doesn't hit the screen (unless you drop it on gravel or rocks) but if its just tile or something flat it'll absorb the hit. I definitely recommend the surface case, it protects the phone without adding a bunch of bulk or weight and still keeps that slim design going.
Neverendingxsin said:
Ive already pre-ordered mine, i can't give a review for the S3 case because i wont have my phone until july 19th but i've had it for my thunderbolt and lemme tell you its great. Ive dropped this phone a few times even face first and thought it would be cracked the case absorbed it all. There's a little lip on the front of the phone so when it falls it doesn't hit the screen (unless you drop it on gravel or rocks) but if its just tile or something flat it'll absorb the hit. I definitely recommend the surface case, it protects the phone without adding a bunch of bulk or weight and still keeps that slim design going.
Click to expand...
Click to collapse
What color S III did you get and what color case did you get?
I always buy the surface combo except for the Galaxy Note where I ordered the active combo since they did not make the surface for the GNote. Going to wait on a coupon or for mobilecityonline to get them in stock. Not spending 50 bucks when waiting a bit can save upwards of 20%.
Maverick777 said:
Awesome. What color SIII do you have and what color case did you get? Did you order directly off Seidio's website?
Looking forward to the review.
Click to expand...
Click to collapse
I ordered black, I like basic black
Sent from my Xoom using Tapatalk 2
Anyone know of the Surface case is on amazon yet? Got an amazon cc
Sent from my iPad using Tapatalk
Maverick777 said:
What color S III did you get and what color case did you get?
Click to expand...
Click to collapse
white S3 and black case
Seidio 20% off coupon good 6/27 & 6/28 Only
Seidio 20% off coupon good 6/27 & 6/28 Only
Enter code June2012 at checkout in the promo code
planoman said:
Seidio 20% off coupon good 6/27 & 6/28 Only
Enter code June2012 at checkout in the promo code
Click to expand...
Click to collapse
Aww man, I wonder if I can get that applied retroactively
I love the Seidio cases and clips. On a whim I stopped at my local T-Mo store yesterday afternoon and found a Seideo-like case (top and bottom snaps together the same way) that is gray/silver for $25. I just checked the web site and did not see it, but some stores are carrying it. I have the blue GS3 and the silver looks great with it. I am a big time Dallas Cowboys fan, so for me it is perfect
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
planoman said:
Seidio 20% off coupon good 6/27 & 6/28 Only
Enter code June2012 at checkout in the promo code
Click to expand...
Click to collapse
Thanks! I have a white 16gb coming so I went with Royal Blue. Should be a nice combo.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR3SSGS3-RB&CartID=1
I just received my Surface & Holster from Seidio. The fit is fantastic. Quality is exactly what I expected. The only downside is that I ordered the Black case with a Blue SGSIII. While I love the black, the few areas where the "blue" shows through, Power button, Volume buttons, USB port, it just makes it look even more purple. Matches the purple home button now
Really, I think the case is a good design, protects well, fits well, and the holster is exactly what I wanted for those times I don't want the phone in my pocket.
The rubberized coating on the case does make the phone a bit harder to slide into and out of the pocket, but keeps it from wiggling around as much when I walk, so that's a wash for me.
So, if you don't mind your "blue" phone looking even more purple, give the case with our without the belt holster, a try!
I will try to add some photos tonight or this weekend.
Matrioux said:
I just received my Surface & Holster from Seidio. The fit is fantastic. Quality is exactly what I expected. The only downside is that I ordered the Black case with a Blue SGSIII. While I love the black, the few areas where the "blue" shows through, Power button, Volume buttons, USB port, it just makes it look even more purple. Matches the purple home button now
Really, I think the case is a good design, protects well, fits well, and the holster is exactly what I wanted for those times I don't want the phone in my pocket.
The rubberized coating on the case does make the phone a bit harder to slide into and out of the pocket, but keeps it from wiggling around as much when I walk, so that's a wash for me.
So, if you don't mind your "blue" phone looking even more purple, give the case with our without the belt holster, a try!
I will try to add some photos tonight or this weekend.
Click to expand...
Click to collapse
Do you think that it adds unnecessary bulk to the phone? or is it still pretty slim, even with the case on it?
just ordered mine in black to go with pebble blue... should be getting it in the next few days..
vpatel91 said:
Do you think that it adds unnecessary bulk to the phone? or is it still pretty slim, even with the case on it?
Click to expand...
Click to collapse
It may not be the thinest out there, but it's pretty good. I'm still getting used to it. It certainly hides the fingerprints on the back
Matrioux said:
I just received my Surface & Holster from Seidio. The fit is fantastic. Quality is exactly what I expected. The only downside is that I ordered the Black case with a Blue SGSIII. While I love the black, the few areas where the "blue" shows through, Power button, Volume buttons, USB port, it just makes it look even more purple. Matches the purple home button now
Really, I think the case is a good design, protects well, fits well, and the holster is exactly what I wanted for those times I don't want the phone in my pocket.
The rubberized coating on the case does make the phone a bit harder to slide into and out of the pocket, but keeps it from wiggling around as much when I walk, so that's a wash for me.
So, if you don't mind your "blue" phone looking even more purple, give the case with our without the belt holster, a try!
I will try to add some photos tonight or this weekend.
Click to expand...
Click to collapse
Congrats! They shipped mine yesterday and hopefully it will arrive Saturday or Monday! I go with the holster instead of pocket and am used to it as I have had the Surface combo for all of my phones. Post up some pics when you get a chance! I thought about getting the royal blue case but went with the black one...
---------- Post added at 07:22 PM ---------- Previous post was at 07:14 PM ----------
jcbofkc said:
I love the Seidio cases and clips. On a whim I stopped at my local T-Mo store yesterday afternoon and found a Seideo-like case (top and bottom snaps together the same way) that is gray/silver for $25. I just checked the web site and did not see it, but some stores are carrying it. I have the blue GS3 and the silver looks great with it. I am a big time Dallas Cowboys fan, so for me it is perfect
Click to expand...
Click to collapse
It does look like a surface case! If it had a holster, I might have jumped on it before ordering mine.
Here are a few photos of the case & holster. I tried to show the thickness and how the black case makes the blue phone look more purple.
I really like the case and I don't think it adds too much in thickness. I also had a real hard time removing the case as the two parts snap together pretty securely.
I have had Seidio cases on my last three phones, any time I try something else, I always switch back.
Related
Ive read all the case reviews and posts and have to say I have yet to find anything impressive. The ebay cases really dont do any justice to the phone and everything at the T-Mobile store either doubles the thickness or is pastel colors. Im hoping an Otterbox Commuter comes sooner than later.
The only case that actually does the phone justice that I found is the Speck Hard Shell case. i tried it on today just to check fitment and it lives up to Speck quality. Unfortunately the case looks to be made only for TMobile as it is not on the spec site. The case fitment was perfect and a very slim design. grip was great and it made the phone actually feel like a phone and not just a screen floating in your hand. Snapped together firmly and all cutouts were exact.
Amazing Case, The only problem is its friggin Purple. Hoping to see a black case sometime soon. Email them and request it. For now it's ebay trash or fat and ugly TMO cases.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I saw a pretty similar case at the T-mo store last week, but slightly different design - instead of having a front and back piece, the bottom of the case (i.e., the part that would cover the edge with the mic) pulled off you slid the phone in. It was exactly what I wanted - except it was magenta. Do men not buy cases?
Where did you see this Speck case, in a T-mo store? Neither of these are on the website. Might have to get a tough case from Case-Mate. Or swap this bad boy for a G2 ;-)
http://www.amazon.com/Premium-Samsung-Galaxy-Vibrant-T-Mobile/dp/B003XQJPTK/ref=pd_sbs_misc_7
Personally I think this is a GREAT case. Its VERY form fitting, doesnt really thicken the phone much, NOT a snap on and very gripable. One thing I hate about snap on cases is that they usually are too hard of a plastic and slide around your hand. This doesn't do that. I ordered 3 different cases and this is by far the best phone case I have ever had.
Thanks for the recommendation - what does it look like on the phone, i.e., hopefully not too sparkly? And how pocketable is it? Thanks!
http://www.sgpstore.com/product_info.php/cPath/23_29/products_id/1584
rshemeld said:
http://www.sgpstore.com/product_info.php/cPath/23_29/products_id/1584
Click to expand...
Click to collapse
This is by far the best looking case i've seen so far.
zender2k said:
This is by far the best looking case i've seen so far.
Click to expand...
Click to collapse
They just posted these cases on there site last night or early this morning that why they say temp out of stock. They should be there soon!
jrharvey said:
http://www.amazon.com/Premium-Samsung-Galaxy-Vibrant-T-Mobile/dp/B003XQJPTK/ref=pd_sbs_misc_7
Personally I think this is a GREAT case. Its VERY form fitting, doesnt really thicken the phone much, NOT a snap on and very gripable. One thing I hate about snap on cases is that they usually are too hard of a plastic and slide around your hand. This doesn't do that. I ordered 3 different cases and this is by far the best phone case I have ever had.
Click to expand...
Click to collapse
Bugdog said:
Thanks for the recommendation - what does it look like on the phone, i.e., hopefully not too sparkly? And how pocketable is it? Thanks!
Click to expand...
Click to collapse
i have this case, i paid under four dollars for it shipped off ebay. you can barely tell its there due to the color, it mutes the smoked chrome ring even more and on the back the hexagon pattern actually looks pretty cool combined with the blue dots on the stock cover.
my only issue is that on mine (might not be all of them) it is a ***** to press the power button a small piece of electrical tape cut and stuck to the inside of the case itself isnt noticeable and adds enough thickness to make it easier to press.
ebay item number: 180536188843
turbosix said:
i have this case, i paid under four dollars for it shipped off ebay. you can barely tell its there due to the color, it mutes the smoked chrome ring even more and on the back the hexagon pattern actually looks pretty cool combined with the blue dots on the stock cover.
my only issue is that on mine (might not be all of them) it is a ***** to press the power button a small piece of electrical tape cut and stuck to the inside of the case itself isnt noticeable and adds enough thickness to make it easier to press.
ebay item number: 180536188843
Click to expand...
Click to collapse
It's not just yours. I have the same case off of ebay and although it does look good, it's a pain to press the power button and the volume controls. A case has holes for those buttons will probably work better. I just ordered body glove's hard case from ebay, the one with the integrated kickstand. Will update this post when I get it.
turbosix said:
i have this case, i paid under four dollars for it shipped off ebay. you can barely tell its there due to the color, it mutes the smoked chrome ring even more and on the back the hexagon pattern actually looks pretty cool combined with the blue dots on the stock cover.
my only issue is that on mine (might not be all of them) it is a ***** to press the power button a small piece of electrical tape cut and stuck to the inside of the case itself isnt noticeable and adds enough thickness to make it easier to press.
ebay item number: 180536188843
Click to expand...
Click to collapse
WOW haha that is exactly what I had to do. I put electrical tape on the inside of the case to thicken the power button. Works like a charm now thanks to my little ghetto rig job
rshemeld said:
http://www.sgpstore.com/product_info.php/cPath/23_29/products_id/1584
Click to expand...
Click to collapse
That looks just like the magenta one I saw in the Tmo store - but better. Thanks for the link! Definitely a sweet case - now if they can just get them in stock, I'll be a happy camper.
turbosix said:
i have this case, i paid under four dollars for it shipped off ebay. you can barely tell its there due to the color, it mutes the smoked chrome ring even more and on the back the hexagon pattern actually looks pretty cool combined with the blue dots on the stock cover.
my only issue is that on mine (might not be all of them) it is a ***** to press the power button a small piece of electrical tape cut and stuck to the inside of the case itself isnt noticeable and adds enough thickness to make it easier to press.
Click to expand...
Click to collapse
Thanks for the input - definitely think I'm going to hold out for one of those SGP cases, they look PERFECT.
Bugdog said:
That looks just like the magenta one I saw in the Tmo store - but better. Thanks for the link! Definitely a sweet case - now if they can just get them in stock, I'll be a happy camper.
Click to expand...
Click to collapse
Np I hope they come in soon as well!
I also have the $4 "diamond back" case from Ebay. Its very nice for the price. Only gripe is the buttons, which I fixed with tape like others have.
jrharvey said:
http://www.amazon.com/Premium-Samsung-Galaxy-Vibrant-T-Mobile/dp/B003XQJPTK/ref=pd_sbs_misc_7
Personally I think this is a GREAT case. Its VERY form fitting, doesnt really thicken the phone much, NOT a snap on and very gripable. One thing I hate about snap on cases is that they usually are too hard of a plastic and slide around your hand. This doesn't do that. I ordered 3 different cases and this is by far the best phone case I have ever had.
Click to expand...
Click to collapse
I had this on my Nexus One and it was the only case that I used. I sold it to a friend, he dropped it in a bath tub filled with water while giving his son a bath, he pulled it out and it still works to this day (I had insurance on the phone where it covers everything besides theft or lost phone).
two rear pictures showing the "sparkle"
Oh sh*t! Thanks a lot for the SGP slider link!
It's exactly what I have been looking for. Price is not too bad. I never heard of this company though.
When it comes in stock I will order one. I would like to see someone review it first but if no one does I'll be the guinea pig
It looks like a pretty awesome case. I doubt I'll use that screen protector though. The white one is mine.
Contacted Speck and they told me it's a Tmobile exclusive and have yet to request any more colors. So Im guessing the Speck dies with the purple. That said I ordered the Samsung "carbon" case, The PDair aluminum case, and a junk case from Amzer. Ill post them all up when they arrive. I hate having such a nice phone and crappy case options.
rshemeld:
Thanks for the link to that SGP case, I will be ordering as soon as its back in stock.
erwin081987 said:
It's not just yours. I have the same case off of ebay and although it does look good, it's a pain to press the power button and the volume controls. A case has holes for those buttons will probably work better. I just ordered body glove's hard case from ebay, the one with the integrated kickstand. Will update this post when I get it.
Click to expand...
Click to collapse
Thirded. Figured I couldn't go wrong for $5 but I came to the realization gel cases are not for me. I experienced the same issue with the power button and the volume rocker so I cut out those annoying ****ing covers
Bugdog said:
That looks just like the magenta one I saw in the Tmo store - but better. Thanks for the link! Definitely a sweet case - now if they can just get them in stock, I'll be a happy camper.
Click to expand...
Click to collapse
I have been waiting for a case that does the phone justice and this is it. I will be waiting for this case.
Hey everyone, I received my TPU case from EBay (item 290530353216) today, here are some comments and pics. The fit is only OK - the cutout for the USB/HDMI ports is a little off, and there is a little bit of an edge around the power button that impedes fingerprint swipability a little. I will say too that I didn't expect it to have the goofy pattern - what is it with TPU cases and argyle patterns?? Also, as you've noticed it is somewhat translucent.
I give it a 3/5. $7 shipped in the US. I'll keep it until another inexpensive case rolls around that is higher quality.
And just in case anyone wonders, on my screen are the Pandora Widget, Android Agenda Widget, and some apps. I am running ADW Launcher (free). Also, I know I left my back panel sticker on there, and that was on purpose.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah seriously with the frikin argyle ****! Its like they made a billion sheets of the argyle TPU and they just like heat mold them to phones (not like thats how they're made). This will be my third phone encased in argyle TPU. Other two were the dark one like yours, this time I got sick of trying to hide the argyle and people asking about the stupid pattern. I got clear so, "yes its frikin argyle! got a problem!?"
Waiting for the Realook screen protectors to be cut. no idea why it takes them so long to cut the right size. Realooks are by far the best screens...
Everything is temporary at this point...I'll buy nicer stuff once my 30 days are up.
I was fortunate enough to have a solid black non-patterned TPU case for my EVO that someone on this forum actually commissioned and was selling out of their garage essentially.
Check out tpu-cases.com. I bought an all black one there, shipped same day. Quality is nice, it's glossy, feels good in the hand for an 8$ case.
the 1.99 one I got from ebay is decent
Nice, never seen that site before. I'll order one up and hopefully it'll get here by the time I'm home from travel. Wish someone would make one like I had for my Evo though - it was matte on the back and shiny on the front.
daveop said:
Check out tpu-cases.com. I bought an all black one there, shipped same day. Quality is nice, it's glossy, feels good in the hand for an 8$ case.
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Well I tried the Speck (or whatever it's called) case from AT&T and hated it...looked and felt like a toy.
Then I tried the Otterbox Impact (the smallest case they make). It's made of a type of rubber that sucks up all dust and won't let it go. It's pure black rubber but after putting it in my pocket and driving up to Starbucks to meet some friends...it looked gray. My pockets don't have any lint or anything in them...and yet the case now looks completely gray. I just put it on yesterday. It's also a bit big for my tastes...and the phone can easily come out of the bottom.
I'm going to try the cheapest cases on eBay. They always worked great for my Nexus 1 and most other phones I've used. The cheap thin rubber is fantastic for me. The phone's so freaking sexy...I just don't want to add a bunch of mass to it.
hotleadsingerguy said:
Well I tried the Speck (or whatever it's called) case from AT&T and hated it...looked and felt like a toy.
Then I tried the Otterbox Impact (the smallest case they make). It's made of a type of rubber that sucks up all dust and won't let it go. It's pure black rubber but after putting it in my pocket and driving up to Starbucks to meet some friends...it looked gray. My pockets don't have any lint or anything in them...and yet the case now looks completely gray. I just put it on yesterday. It's also a bit big for my tastes...and the phone can easily come out of the bottom.
I'm going to try the cheapest cases on eBay. They always worked great for my Nexus 1 and most other phones I've used. The cheap thin rubber is fantastic for me. The phone's so freaking sexy...I just don't want to add a bunch of mass to it.
Click to expand...
Click to collapse
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Fixter said:
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Click to expand...
Click to collapse
i like the feather as well. not much in terms of impact protection, but most of my scratches come from the phone vibrating on the desk over time and scuffing the battery door, so its a nice line of defense against that. also, its a little less slippery than the standard battery door which i like
domin8 said:
i like the feather as well. not much in terms of impact protection, but most of my scratches come from the phone vibrating on the desk over time and scuffing the battery door, so its a nice line of defense against that. also, its a little less slippery than the standard battery door which i like
Click to expand...
Click to collapse
Yeah its great for worrying less about the normal wear and tear.
I particular like the argyle tpu cases which give decent protection and feel. i have it for the ipad, galaxy tab, atrix, inspire, and xoom.
www.degasis.net offers these as well
I ordered my case from http://www.degasis.net/models/atrix.html (as the poster above recommended. $6.98 shipped
This is the best fitting TPU case I've had across all my devices. The best part is that it actually makes the on/off button easier to push and the finger scanner easier to operate (its cut at the perfect angle to compliment it). Its slightly different cut but a better fit than the pictures posted above.
I'll post pictures when I come across another camera some time today or tomorrow.
TPU is far superior to any other case material in my book. perfect balance of grip/non-stick, thinness, protection, and fit.
eatkabab said:
I ordered my case from http://www.degasis.net/models/atrix.html (as the poster above recommended. $6.98 shipped
TPU is far superior to any other case material in my book. perfect balance of grip/non-stick, thinness, protection, and fit.
Click to expand...
Click to collapse
looks exactly like the case i got from ebay for $1.99 lol
Incipio protection?
Fixter said:
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Click to expand...
Click to collapse
I really like the look and feel of the Incipio low profile cases. Do you feel like it would do any good if you dropped the phone?
grayfoxx said:
I really like the look and feel of the Incipio low profile cases. Do you feel like it would do any good if you dropped the phone?
Click to expand...
Click to collapse
That's the problem I have with the feather - it doesn't protect either end of the device, only the sides and back.
Judging by the picture, it looks like you have that "textured" screen protector. What is the screen protector you are using? Those are my favorite kinds and I have been trying to find one for a while! thanks in advance
Kbc, who are you asking? I'm using an AT&T screen protector. It's matte and perfectly smooth.
kbc88 said:
Judging by the picture, it looks like you have that "textured" screen protector. What is the screen protector you are using? Those are my favorite kinds and I have been trying to find one for a while! thanks in advance
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
phobos512 said:
Nice, never seen that site before. I'll order one up and hopefully it'll get here by the time I'm home from travel. Wish someone would make one like I had for my Evo though - it was matte on the back and shiny on the front.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sounds similar to the one i had on my desire but I cant find it anywhere now
eatkabab said:
This is the best fitting TPU case I've had across all my devices. The best part is that it actually makes the on/off button easier to push and the finger scanner easier to operate (its cut at the perfect angle to compliment it). Its slightly different cut but a better fit than the pictures posted above.
Click to expand...
Click to collapse
OK, you've sold me on this case Good description of how it is, what colour did you get?
This is a placeholder post!
Here's Samsung's own list of accessories. I'm hoping to find the Spare Battery Charging System at in-store somewhere at launch, as even with the claims about battery life on this phone I'm pretty sure I'll need it. I bought the battery alone (official) for about $20 on eBay for my original Epic, along with a cheap knock-off charger, but it seems like it would be worth having the nice stand this time. Plus I suspect since we're kind of a one-off on the battery it might be a while before we see the accessories popping up online.
The other thing I'm looking for is a good holster. So far all I've found is this which may have to do. I've always preferred clip-in holsters, but I had a leather one carry me through my Moment and Epic that I've been happy with, so I may do the same again.
Here at the sprint stores, we'll be selling a slim case with built-in kickstand
It's pretty nice. It's all black, the back is a sort of tough nylon weave, and the kickstand is a black metal band the runs the whole width about a third of the way down, and a tiny hinge in the middle, so half of the band is the kickstand. I like it because it's a nice alternative to traditional plasticky cases, and the kickstand appears to be pretty durable. The fabric feel will definitely take some getting used to, but one upside I've found so far is the awesome amount of grip...this thing should never slip out of your hand.
EDIT: when I get in to work today I'll try and take a couple pics and post em up here
squshy 7 said:
Here at the sprint stores, we'll be selling a slim case with built-in kickstand
It's pretty nice. It's all black, the back is a sort of tough nylon weave, and the kickstand is a black metal band the runs the whole width about a third of the way down, and a tiny hinge in the middle, so half of the band is the kickstand. I like it because it's a nice alternative to traditional plasticky cases, and the kickstand appears to be pretty durable. The fabric feel will definitely take some getting used to, but one upside I've found so far is the awesome amount of grip...this thing should never slip out of your hand.
EDIT: when I get in to work today I'll try and take a couple pics and post em up here
Click to expand...
Click to collapse
Any sign of you guys carrying the above-linked charging cradle with extra battery for the same $49.99 price? That's what I'm looking for. Although I suppose I should probably wait 'til I receive a Premier coupon in the mail...
squshy 7 said:
Here at the sprint stores, we'll be selling a slim case with built-in kickstand
It's pretty nice. It's all black, the back is a sort of tough nylon weave, and the kickstand is a black metal band the runs the whole width about a third of the way down, and a tiny hinge in the middle, so half of the band is the kickstand. I like it because it's a nice alternative to traditional plasticky cases, and the kickstand appears to be pretty durable. The fabric feel will definitely take some getting used to, but one upside I've found so far is the awesome amount of grip...this thing should never slip out of your hand.
EDIT: when I get in to work today I'll try and take a couple pics and post em up here
Click to expand...
Click to collapse
I'm very interested in this case. Tell us what material is the inside of the case.
whatsitsnamenow said:
I'm very interested in this case. Tell us what material is the inside of the case.
Click to expand...
Click to collapse
Yeah, I am interested on the inside material as well. The case Sprint sold for the Epic scuffed up the edge of my first screen
Sent from my SPH-D700 using xda premium
I want a case like I had for my itouch... its kinda rubbery butplasticy at the same time... its bendy but still solid..
deano0714 said:
I want a case like I had for my itouch... its kinda rubbery butplasticy at the same time... its bendy but still solid..
Click to expand...
Click to collapse
Tpu cases is what u mean.
squshy 7 said:
Here at the sprint stores, we'll be selling a slim case with built-in kickstand
It's pretty nice. It's all black, the back is a sort of tough nylon weave, and the kickstand is a black metal band the runs the whole width about a third of the way down, and a tiny hinge in the middle, so half of the band is the kickstand. I like it because it's a nice alternative to traditional plasticky cases, and the kickstand appears to be pretty durable. The fabric feel will definitely take some getting used to, but one upside I've found so far is the awesome amount of grip...this thing should never slip out of your hand.
EDIT: when I get in to work today I'll try and take a couple pics and post em up here
Click to expand...
Click to collapse
Sweet! Was about to order the TPU case but will wait for your pictures first. Any idea on the price?
Does it look like this?
http://www.daydeal.com/product.php?productid=58196
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JBNAquatics said:
Sweet! Was about to order the TPU case but will wait for your pictures first. Any idea on the price?
Does it look like this?
http://www.daydeal.com/product.php?productid=58196
Click to expand...
Click to collapse
That kickstand doesn't look very durable |:
Pheno.menon said:
That kickstand doesn't look very durable |:
Click to expand...
Click to collapse
Who Cares!!!! It's Carbon Fiber!!
SRobby said:
Who Cares!!!! It's Carbon Fiber!!
Click to expand...
Click to collapse
I'm gonna have to say unlikely on that actually being carbon fiber, but it does look cool. It says the kickstand is metal and that it snaps in to the case...might not be too bad.
I hate looking at these things online without knowing how they will actually feel/weight/bulk up the phone...grrr
sprint is carrying two cases at launch
purple and carbon fiber - source: sprint store worker my SWAC line is thru that will be ordering my epic touch tomorrow morning
JBNAquatics said:
Sweet! Was about to order the TPU case but will wait for your pictures first. Any idea on the price?
Does it look like this?
http://www.daydeal.com/product.php?productid=58196
Click to expand...
Click to collapse
That actually looks pretty good. Just what I was looking for.
Not bad looking but certainly won't fit in the car dock. I use that for all my music and movies in the cars so I hope it is not to bad to get on and off the phone but strong enough to stay on if dropped. I would definitely try the carbon fiber thought. Looks nice!
matte black TPU case
http://www.amazon.com/TPU-Cases-Fle...ref=tag_dpp_lp_edpp_ttl_in?tag=vglnk-c1204-20
Gloss black TPU case
http://www.amazon.com/TPU-Cases-Fle...UTF8&qid=1316090412&sr=8-2&tag=vglnk-c1204-20
the supplier sells more colors but there arent any images
edit: just recieved these.. they feel more like a gel case. im sending them back.
JBNAquatics said:
Sweet! Was about to order the TPU case but will wait for your pictures first. Any idea on the price?
Does it look like this?
http://www.daydeal.com/product.php?productid=58196
Click to expand...
Click to collapse
I just returned from the closest Sprint store (an hour away) and while they didn't have the phone, they had 2 cases and a set of screen protectors. The case in that picture is exactly what the Sprint store had. It was even in a Samsung labeled clamshell container, making me think that maybe its a Samsung original product??? Anyway, I thought it looked very nice and would have bought it had they allowed it. They said the pricing wasn't available yet, so they couldn't sell it.
TurboFool said:
Here's Samsung's own list of accessories. I'm hoping to find the Spare Battery Charging System at in-store somewhere at launch, as even with the claims about battery life on this phone I'm pretty sure I'll need it. I bought the battery alone (official) for about $20 on eBay for my original Epic, along with a cheap knock-off charger, but it seems like it would be worth having the nice stand this time. Plus I suspect since we're kind of a one-off on the battery it might be a while before we see the accessories popping up online.
The other thing I'm looking for is a good holster. So far all I've found is this which may have to do. I've always preferred clip-in holsters, but I had a leather one carry me through my Moment and Epic that I've been happy with, so I may do the same again.
Click to expand...
Click to collapse
Aww, they fixed it today, but I was finding it hilarious that the official Sprint accessories in the Epic 4G Touch section were all called "Epic Touch 4G"... too bad I didn't get a screenshot of it.
This one piece protective kickstand cover snaps on easily to protect your device.
Designed for easy access to all of the features of your Samsung device.
Carbon Fiber Look finish
Includes Metal Kickstand to view device horizontally
Click to expand...
Click to collapse
Wonder when the car dock will no longer be on back order.
I've never heard of this brand before but I heard lots of good reviews on TPU cases and need something to put my GS3 in when I get it. Was looking to stay away from black but when I seen this picture not only did it convince me to go ahead and get it, but i'm gonna end up getting a black Otterbox as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This was just $4.95 shipped
Anyone had any experience with this brands TPU cases before? I will update this thread with my review once I get it installed.
**Update 6.29.12**
I picked up my phone from BB yesterday and took this case with me to protect my phone until my Incipio Sylicrilic Dual Pro arrived...which was at home waiting for me along with my Tagsfordroid NFC tags. The case had a nice feel to it, at least on the shiny parts where it had more grip...the matte area was pretty slick/smooth/slippery. It was my first experience with a TPU case and while it added very little bulk, much like a wetsuit, it was a little difficult to stretch onto the phone. I thought I was going to damage the phone trying to get it on. But after getting it on I liked it for it's intended use, preventing cosmetic damage to the backside of the case and allowing me to set the phone face down without feat of damaging the screen. But my big complaint is that the buttons are very hard to press and you can't even tell when you've done so as you have no audible or tactile feedback upon the press. Because of this, the TPU came off as soon as I got home and noticed my SDP had arrived. I do not recommend this case unless it's just going to be used similarly to the situation I used it for.
generic cases you can get them for a buck on ebay with shipping. have used them on a lg o2x, sgs2, HOX and later today a sgs3. they usually fit really good. had no issues with them.
providing a link to the first case i found on ebay http://www.ebay.com/itm/1-5-Colors-...ain_0&var=&hash=item4166b8b83e#ht_4044wt_1018
I've ordered one for every phone I've had this past year they are super thin and have a good grip on the sides
But the white ones get super dirty really fast
916x10 said:
I've never heard of this brand before but I heard lots of good reviews on TPU cases and need something to put my GS3 in when I get it. Was looking to stay away from black but when I seen this picture not only did it convince me to go ahead and get it, but i'm gonna end up getting a black Otterbox as well.
This was just $4.95 shipped
Anyone had any experience with this brands TPU cases before? I will update this thread with my review once I get it installed.
Click to expand...
Click to collapse
Where did u order from?
Sent from my GT-I9300
Hampa_D said:
generic cases you can get them for a buck on ebay with shipping. have used them on a lg o2x, sgs2, HOX and later today a sgs3. they usually fit really good. had no issues with them.
providing a link to the first case i found on ebay http://www.ebay.com/itm/1-5-Colors-...ain_0&var=&hash=item4166b8b83e#ht_4044wt_1018
Click to expand...
Click to collapse
The black one costs $2 and ships out of Hong Kong and takes anywhere from 7-25business days to arrive....no thanks.
jpitch2415 said:
I've ordered one for every phone I've had this past year they are super thin and have a good grip on the sides
But the white ones get super dirty really fast
Click to expand...
Click to collapse
Nice, thanks for the feedback.
ronj1986 said:
Where did u order from?
Click to expand...
Click to collapse
Amazon
I bought one on eBay for 4.59 shipped. I bought clear, but other colors are on ebay as well. http://www.ebay.com/itm/290721298653 Haven't received it yet.. Here is a seller from Ireland with a variety of colors. I might just pick up a blue one.. http://www.ebay.com/itm/FOR-SAMSUNG-GALAXY-S3-I9300-HARD-GEL-CASE-COVER-FREE-SCREEN-PROTECTOR-/290720955624?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item43b051bce8
I have the white version on the white galaxy s3 and it looks really good.
Now obviously there are other cases that look better, but none for a couple of euro/dollars/pounds or what have you.
Thor said:
I have the white version on the white galaxy s3 and it looks really good.
Now obviously there are other cases that look better, but none for a couple of euro/dollars/pounds or what have you.
Click to expand...
Click to collapse
How does it feel in your hand? Does it add alot of bulk? What's the fitment like? Does it attract dust/lint? Does it add any grip? Have you dropped it at all, if so, did it fare well?
via Atrix 2/VictoryROM/XDA app
I love these types of cases. I have had one for every phone I have had over the past year and a half(and I've had a bunch) Case doesnt add too much bulk at all and it feels great in the hand. The side grips are very nice
Don't these fall off easily?
Sent from my Samsung Epic 4G Touch
916x10 said:
I've never heard of this brand before but I heard lots of good reviews on TPU cases and need something to put my GS3 in when I get it. Was looking to stay away from black but when I seen this picture not only did it convince me to go ahead and get it, but i'm gonna end up getting a black Otterbox as well.
This was just $4.95 shipped
Anyone had any experience with this brands TPU cases before? I will update this thread with my review once I get it installed.
Click to expand...
Click to collapse
I just bought a couple of TPU case for my S3 as they are my favorite type of case. I have the ones on eBay that have a slightly textured X pattern on the back and a couple identical to the flexishield case on mobilefun. I've found the ones on eBay to be to loose and move around a bit when I'm adjusting the volume or locking/unlocking my phone ect and both of them have a problem with reflecting the color of the case back into the camera lens when using the flash.It makes for some pretty interesting photo effects.
The ones you linked to look good but I would advise against getting a semi transparent color. I'm thinking about getting one in black or white to see me through until Incipio release there NGP case.
Okay, I forgot the mention this before when I posted the images.
While they feel great and look really good.
I noticed NFC doesn't work with cover on, I think this might be the same for most covers and not just this one, but none the less if you use NFC a lot. Keep in mind you need to remove the cover to do so.
wizky911 said:
Don't these fall off easily?
Sent from my Samsung Epic 4G Touch
Click to expand...
Click to collapse
TPU cases typically don't fall off. You have to pop them off. They're pretty ideal.
Big Phoney said:
I just bought a couple of TPU case for my S3 as they are my favorite type of case. I have the ones on eBay that have a slightly textured X pattern on the back and a couple identical to the flexishield case on mobilefun. I've found the ones on eBay to be to loose and move around a bit when I'm adjusting the volume or locking/unlocking my phone ect and both of them have a problem with reflecting the color of the case back into the camera lens when using the flash.It makes for some pretty interesting photo effects.
The ones you linked to look good but I would advise against getting a semi transparent color. I'm thinking about getting one in black or white to see me through until Incipio release there NGP case.
Click to expand...
Click to collapse
Thanks. Good info
Thor said:
I noticed NFC doesn't work with cover on, I think this might be the same for most covers and not just this one, but none the less if you use NFC a lot. Keep in mind you need to remove the cover to do so.
Click to expand...
Click to collapse
Ah, thanks for the heads up.
via Atrix 2/VictoryROM/XDA app
Got my case today, super fast if you ask me considering I placed my order at 11pm on the 6th. Will definitely do business again with these guys. I bought it on Amazon from "SF Planet", they're out of Minnesota and I live in California.
So I checked out the case and the first thing I noticed is how thin it is, will add very little bulk to the phone. It's thick enough to hold it's form but thin enough to be very low profile. The case has shiny and dull areas on it....the shiny areas are very grippy, the dull areas not so much. But since the edges where you would normally hold the phone are knurled and shiny, gripping it should not be a problem. It's also got cutouts for the necessary areas, including both top and bottom mic's. Can't speak on the fitment for obvious reasons but will do so hopefully soon.
So far, so good.
People that buy this case in white, it gets very dirty! Only the left half of the wave design since it's a different surface. (matte vs. gloss).
Do TPU cases provide enough front coverage?
It seems like the Commuter would do better.
if your in london you can buy it from these guys... i bought a case for my SGS1 Year and a bit ago and they were really good than http://www.londonmagicstore.co.uk/Samsung/I9300/S+Line.htm
LLStarks said:
Do TPU cases provide enough front coverage?
It seems like the Commuter would do better.
Click to expand...
Click to collapse
It certainly would, but considering the commuter wont be shipping until the week after launch I had no choice but to get something. TPU cases will guard against scratches, thats about it.
Sent from my MB865 using XDA App
OP updated with my review
This is a review on the ROCK quicksand case in light grey for the Samsung Galaxy S3.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've just received the case, so I will try to report back in a few weeks to let you know how it's holding up in use.
First thing I want to touch on is the design. It's really a beautiful case. I hear people talking about how their otterbox or body glove case enhances the look of the phone and I just don't see it. I prefer something clean and minimalist, that goes with the aesthetic of the phone. I think this case hits that, of course it's all personal preference.
It's very thin, and doesn't add noticeable bulk in the jeans pocket. It's easy to get in and out of the pocket, the material is grippy in the hand but doesn't grab onto my pockets.
The cutouts are really well done, they may look a little bit off in some of the photos but that is due to camera angle and lighting shadows, they are actually dead on. The volume rocker and lock button are just as easy to press, in fact maybe slightly easier due to the cutout guiding your finger onto the button. One small touch I really like is the slight lip around the camera cutout. It looks slick, but it also seems like something that will help the camera lens from getting scratched when setting it down on the table. It also has a slight lip on the top, so setting it down on a table will not get your screen dirty. I have the zagg invisbleshield on there (terrible product) and this case does not pull up the edges on that screen protector.
The texture of the case is the main difference between this and other slim hardcases, and it's a very nice feel. I was worried when I heard people comparing it to sandpaper, because sandpaper gives me that nails on chalkboard feeling when I touch it. But it's not like that, it's more like a river smoothed sandstone, with a touch of rubber feeling underlying it. It adds a bit of grip to the phone that the naked gs3 was missing, it won't be easy to drop, even if your hands are sweaty from working out.
Overall the fit and finish on this case is exceptional. I tried on a few tpu style cases at the mall, as well as some of the ones t-mobile was offering, and the quality on this blows all of those away. It snaps on easily and has a nice tight fit. The mold lines on the sides are only noticeable in just the right lighting, when looking real close. There is no flashing at all. It's nothing like this: http://forum.xda-developers.com/showthread.php?t=1765882
This is obviously not a case for those who need heavy duty drop protection, but if you want something with great design that makes the phone feel better in your hand give it a shot.
I snagged it on ebay from 168sunflowers20060621 , and I'm pretty sure it's not a fake. I paid $13.50 and it took about 2 and a half weeks to ship from HK.
Here's the rest of the photos:
Looks great, mine is sitting in my office right now....worked from home today. I'll pick it up tomorrow to play with. I was right with you on the light grey with the white S3.
Got a black one for my blue s3. I love it, and as stupid as it sounds the combination matches my Volvo s60r interior perfectly...not that i care or planned that....lol
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
bimmerd00d said:
Got a black one for my blue s3. I love it, and as stupid as it sounds the combination matches my Volvo s60r interior perfectly...not that i care or planned that....lol
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Nice! My car has gray leather, I did not think about that until you mentioned it, but it is a good match! Haha. Post up a pic, I'd love to see how the dark grey looks.
I had the black version (for my blue phone) sitting on my desk at work two weeks before the phone was even available.
Awesome case, the phone won't slip out of your hands with this case installed.
Great review (and nice pics). I have a white carbon fiber back coming and wonder if it would fit in this case.
Looks like Amazon has it for 15.99 with free Prime shipping.
http://www.amazon.com/dp/B0089E44OM/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
----
Brought to you by my ghetto ProClip mount http://m.youtube.com/watch?v=jH3XoLqfXsY
fishfuzz said:
Great review (and nice pics). I have a white carbon fiber back coming and wonder if it would fit in this case.
Click to expand...
Click to collapse
I kinda doubt it, the quicksand case is a really snug fit.
fishfuzz said:
Great review (and nice pics). I have a white carbon fiber back coming and wonder if it would fit in this case.
Looks like Amazon has it for 15.99 with free Prime shipping.
http://www.amazon.com/dp/B0089E44OM/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Click to expand...
Click to collapse
Dunno about the carbon fiber back, but jmorton is right, it's very closely fitted. That amazon link is the way to go, I def would have paid the extra $3 to get it in 2 days instead of 3 weeks. Not complaining though, I got good service and a good deal from the ebay seller.
I still haven't seen anyone pick up that plum color, i'm curious what it looks like in real life. Kinda reminds me of these: http://tantal.kalashnikov.guns.ru/pro11.html
+1 on the case. I have it and LOVE it. Adds the perfect amount of weight to the phone.
+1
I never used cases on my other phones, really don't care for them. I picked up this case because of the reviews and style. It may offer minimal protection, but for someone that doesn't like cases it will due. Hopefully work if i fumble the phone.
I got mine right after I got the phone, I love it. I was thinking about ordering the grey one, I have the black one!
edit - yep just ordered the grey one. can never have too many cases, right?
Well, I am in for one. Thanks OP. I will post how it fits with the carbon fiber back as well.
----
Brought to you by my ghetto ProClip mount http://m.youtube.com/watch?v=jH3XoLqfXsY
fishfuzz said:
Well, I am in for one. Thanks OP. I will post how it fits with the carbon fiber back as well.
----
Brought to you by my ghetto ProClip mount http://m.youtube.com/watch?v=jH3XoLqfXsY
Click to expand...
Click to collapse
Cool man, post photos when you get it in!
I have the Black and Dark Grey one, and the Blue phone. More than happy to take pics if you guys want to see them.
Rev1vaL said:
I have the Black and Dark Grey one, and the Blue phone. More than happy to take pics if you guys want to see them.
Click to expand...
Click to collapse
Please do, as I am indecisive on which one to get for my blue phone. I really didn't want to get a case, but seeing as how I dropped it on cement earlier tonight, i'm gonna have to in order to cover the dents/scratches up. :/
adima said:
Please do, as I am indecisive on which one to get for my blue phone. I really didn't want to get a case, but seeing as how I dropped it on cement earlier tonight, i'm gonna have to in order to cover the dents/scratches up. :/
Click to expand...
Click to collapse
Sure thing, I'll take a few in the morning.'
here's the album I made - http://imgur.com/a/BcMmK
sorry for them being sideways, imgur was being stupid and not letting me rotate them
Case arrived this morning and in good order. There are a couple of rough edges which will need to be trimmed (at the bottom where I normally rest my pinkies as I type and the top corners).
It certainly adds a nice amount of texture to the device, but I haven't determined if my over sensitive skin will be able to handle the effect long term yet.
There is a negligible difference on weight with this case, and I found it slides in and out of my pocket easily.
For those of you who own one, can you see a visible molding line around the edge? This one is obvious in some places.
----
Brought to you by my ghetto Samsung Galaxy S III mount http://m.youtube.com/watch?v=jH3XoLqfXsY
fishfuzz said:
Case arrived this morning and in good order. There are a couple of rough edges which will need to be trimmed (at the bottom where I normally rest my pinkies as I type and the top corners).
For those of you who own one, can you see a visible molding line around the edge? This one is obvious in some places.
[/url]
Click to expand...
Click to collapse
Mine is perfect (black one). Mine has no rough edges or visible molding lines whatever.
Finger dent from the case
Molding
And the final reason to return: the edges will quickly wear leaving a darker plastic beneath.
Thankfully I bought through Amazon, so returns shouldn't be an issue.
----
Brought to you by my ghetto Samsung Galaxy S III mount http://m.youtube.com/watch?v=jH3XoLqfXsY
jmorton10 said:
Mine is perfect (black one). Mine has no rough edges or visible molding lines whatever.
Click to expand...
Click to collapse
Same here. I've been using the black one for probably two weeks now and it's perfect.