Related
Three features I wasn't expecting are especially nice improvements over my previous phone:
(1) A setting that blocks all calls or messages from people not on my contact list.
(2) A setting that keeps the phone on as long as it sees me looking at it.
(3) The ability to take a photo via a voice command.
Gary02468
Its an awsome phone and its great you want to share your discovery with us. However it would be even better if you can add some value to your thread you have created by elaborating on how thiese features are great , how to turn them on and off , and or make a list to help newcomers find little usefull features like thies on there new awsome phone. Think of these members who would search for a post like this one and how it could help them.
Thanks in anycase.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
1) I could be totally wrong, as it's been about a month since I last held the original Note, but I could have sworn I distinctly remember this feature in the original Note. I remember remarking to myself how convenient it was, but I never used it because I had a third party app that did the same thing.
2) Smart Stay was a feature I was really looking forward to from the S III. I can't tell you how many times I've been reading a long article online or something else, and the screen dimmed or turned off because it had no clue I was still actively using the phone. Smart Stay has effectively eliminated this, and it has worked really well for me.
3) This feature I have only heard about ONCE, and that was while watching a YouTube video someone had done on the Note II. I was very impressed and it's another feature I have longed for. I've tried it out and it works flawlessly.
I'd also go on to add there are many more features I find convenient. Quick Glance is a convenient little gem that I've heard no one mention in the dozens of reviews I've seen about the Note II. I found it by just going through every part of my phones' settings. When your screen is off, quick glance will cut on your screen for a couple of seconds, and display a large clock with the date, email count, text count, and missed calls count. This is activated by hovering your hand, briefly, over the phones light sensor. It comes in extremely hand during the night when I want to quickly roll over, check the time, and roll back over to sleep. No more trying to find the phone ... finding the button to turn the screen on ... then turning the screen off again. Everything is hands-free. A beautiful little aurora borealis-type animation happens in the background while quick glance is active. The majority of the screen stays black so it's not bothersome.
Another favorite feature of mine is Direct Call. It essentially calls whatever contact whose information is currently being displayed on your screen from your contacts list. So instead of having to pull up, John Doe in your contact ... then select what number of his you want to dial (assuming he has multiple numbers) ... then pushing the "call" button to execute the call... all you have to do is have John Doe's contact info pulled up and put the phone to your face as if you were about to talk on a call, and Direct Call will automatically dial the first number assigned to that contact or whatever the default number is. I've found this feature GREATLY appreciated.
I'm so happy with my new toy. So many cool features that are actually beneficial.
Cab121 said:
it would be even better if you can add some value to your thread you have created by elaborating on how thiese features are great , how to turn them on and off , and or make a list to help newcomers find little usefull features like thies on there new awsome phone.
Click to expand...
Click to collapse
Ok, sure. All three features can be found just by browsing through the phone's settings (or the User Manual). Blocking Mode is listed under the device's top-level Settings; the screen-stay face-detection is under the device's Settings|Display; and the camera's viewfinder screen explains the voice-command feature when that feature is enabled (which I think it was by default; it can be toggled in the camera's top-level Settings).
Dr. Evo said:
I could have sworn I distinctly remember [Blocking Mode] in the original Note.
Click to expand...
Click to collapse
Could well be. My previous phone was an Infuse, not a Note 1. So the feature was new to me, if not to the world.
3) i did not know this... found it and tested it out. pretty cool
Scythe024 said:
3) i did not know this... found it and tested it out. pretty cool
Click to expand...
Click to collapse
Same here. I did not know this feature on the camera. Nice!
(1) A setting that blocks all calls or messages from people not on my contact list.
Click to expand...
Click to collapse
Blocking Mode is listed under the device's top-level Settings
Click to expand...
Click to collapse
Hmm I wasn't aware Blocking mode could be used like this.
I'm guessing I would set it to "Disable Incoming Calls" "Always" "Allowed contacts > All contacts".
Does that sound right?
daveschz said:
Hmm I wasn't aware Blocking mode could be used like this.
I'm guessing I would set it to "Disable Incoming Calls" "Always" "Allowed contacts > All contacts".
Does that sound right?
Click to expand...
Click to collapse
Exactly.
Unrecognized callers can still leave you voice mails. If you use Google Voice for voice mail, then you can spam-filter those; and even for messages that don't get filtered, you only have to glance at the transcriptions for a second, instead of taking time to listen to the messages, if you want to see if any are legit.
Dr. Evo said:
When your screen is off, quick glance will cut on your screen for a couple of seconds, and display a large clock with the date, email count, text count, and missed calls count. This is activated by hovering your hand, briefly, over the phone[']s light sensor.
Click to expand...
Click to collapse
I like that feature too, except that there's a five-second delay before the screen responds to the gesture, which makes it quicker just to press the power button.
Do you get that delay as well?
Gary02468 said:
I like that feature too, except that there's a five-second delay before the screen responds to the gesture, which makes it quicker just to press the power button.
Do you get that delay as well?
Click to expand...
Click to collapse
Yeah, this is a great idea for a feature. But, I have some reservations. First - battery life, you can tell the prox sensor is on, and lights up red when the screen is off. Second - speed, I find it faster when the device is flat to just press the home key, all the same info is on the lock screen, and it wakes and goes back to sleep faster if anything.
Sent from my Note II
Direct Dial
Actually, you can specify which number is the default dialed by this feature:
Touch and hold the phone number you want set to default. After a second or so delay, a menu appears, and "set default" is the last item in that menu.
Dr. Evo said:
1) Another favorite feature of mine is Direct Call. It essentially calls whatever contact whose information is currently being displayed on your screen from your contacts list. So instead of having to pull up, John Doe in your contact ... then select what number of his you want to dial (assuming he has multiple numbers) ... then pushing the "call" button to execute the call... all you have to do is have John Doe's contact info pulled up and put the phone to your face as if you were about to talk on a call, and Direct Call will automatically dial the first number assigned to that contact or whatever the default number is. I've found this feature GREATLY appreciated.
Click to expand...
Click to collapse
I use a Tasker profile that in case of missed call or missed SMS every "X" time, remind the missed event with a vibration in case the volume is <=0 or with a sound in case the volume of the phone is > 0.
The problem: this profile works only when the screen is ON but neither in the profile, nor in the task there is a condition about the status of the screen!
Tasker's accessibility service is already enabled.
Why other profiles that switch on or off WiFi or bluetooth work while the screen is OFF?
There is something special about Z1C, Tasker to know?
Any smart Tasker user can help me, please?
c_c_c_66 said:
I use a Tasker profile that in case of missed call or missed SMS every "X" time, remind the missed event with a vibration in case the volume is <=0 or with a sound in case the volume of the phone is > 0.
The problem: this profile works only when the screen is ON but neither in the profile, nor in the task there is a condition about the status of the screen!
Tasker's accessibility service is already enabled.
Why other profiles that switch on or off WiFi or bluetooth work while the screen is OFF?
There is something special about Z1C, Tasker to know?
Any smart Tasker user can help me, please?
Click to expand...
Click to collapse
Are you using Stamina mode? That may be preventing Tasker from running when you turn the screen off.
Gaúcho comedor said:
Are you using Stamina mode? That may be preventing Tasker from running when you turn the screen off.
Click to expand...
Click to collapse
I'm using Stamina mode but I have found a solution right now!
In task properties flag keep device awake... et voilà!
Thank you!
Hi everyone,
I'm having a rather weird problem, hope you can help me out.
Every time I don't answer a call (have a missed call) right after the call ends, the phone starts playing a notification (annoying one for that manner).
I assume that it"s alerting me about a missed call. supposably this should be a no brainier, and the option to disable it is supposed to be somewhere in the settings. But I can't find that setting. and the notification is driving me crazy.
Does anybody have any idea how to turn it off?????
Of course thank you for your time and effort...
henengel said:
Hi everyone,
I'm having a rather weird problem, hope you can help me out.
Every time I don't answer a call (have a missed call) right after the call ends, the phone starts playing a notification (annoying one for that manner).
I assume that it"s alerting me about a missed call. supposably this should be a no brainier, and the option to disable it is supposed to be somewhere in the settings. But I can't find that setting. and the notification is driving me crazy.
Does anybody have any idea how to turn it off?????
Of course thank you for your time and effort...
Click to expand...
Click to collapse
well if your phone is rooted and have xposed framework install you can install the g3tweaksbox... from this thread...
http://forum.xda-developers.com/showthread.php?t=2792242
the only way to disable those sound notifications without root etc is to put phone on vibrate or silent... the g3tweaksbox gets updated and soon will have more features (you can download the beta if you want)
I am rooted and have g3 tweak box... On its beta 1.1. But didn't see any option there to disable the iterating notification...
henengel said:
I am rooted and have g3 tweak box... On its beta 1.1. But didn't see any option there to disable the iterating notification...
Click to expand...
Click to collapse
I guess wait till the next g3tweakbox update... it should be implemented soon...
I hope so... It's crazy LG didn't give us an option to disable it...
Hey guys.
I just contacted Motorola to request some new features be added to the stock ROM (which in my opinion) would be crucial to increasing the functionality and battery levels of the watch.
Don't know if any Motorola Dev's/Engineers are following this site but just in case, I'd love to have these features asap.
Please add more if there is anything I have missed.
1. Have the ability to turn Vibrate OFF while still receiving notifications on the watch
Why ? Because I have my phone in my pocket constantly, and my phone vibrates when a new notification comes up. I dont need my pocket and my wrist vibrating together.
Also, Increase battery life.
2. Need to have the ability to turn off notifications for certain apps. For Example, I want the watch to vibrate when an SMS or Email comes through, but turned off for Messenger, kik, and everything else.
Also, by having this feature, Im sure a developer could write up a small app to install onto the phone which would tell the watch which notifications to vibrate for, and which to just display on the screen.
And again, this will save battery life by turning the vibrate motor off for (in my case) 90% of the notifications coming through.
3. Have a slider to control the level of vibration or the burst of vibration.
Why ? This adds a level of customization to the watch.
Also, I see people complaining that the watch doesn't vibrate enough while in my case, its vibration time is too long. By having the ability to shortening the vibrate time, you also save battery life (if not by much).
By having all 3 features embedded into the ROM, On the average user, it should increase battery life by almost double (if not more).
TRLOS said:
Hey guys.
I just contacted Motorola to request some new features be added to the stock ROM (which in my opinion) would be crucial to increasing the functionality and battery levels of the watch.
Don't know if any Motorola Dev's/Engineers are following this site but just in case, I'd love to have these features asap.
Please add more if there is anything I have missed.
1. Have the ability to turn Vibrate OFF while still receiving notifications on the watch
Why ? Because I have my phone in my pocket constantly, and my phone vibrates when a new notification comes up. I dont need my pocket and my wrist vibrating together.
Also, Increase battery life.
2. Need to have the ability to turn off notifications for certain apps. For Example, I want the watch to vibrate when an SMS or Email comes through, but turned off for Messenger, kik, and everything else.
Also, by having this feature, Im sure a developer could write up a small app to install onto the phone which would tell the watch which notifications to vibrate for, and which to just display on the screen.
And again, this will save battery life by turning the vibrate motor off for (in my case) 90% of the notifications coming through.
3. Have a slider to control the level of vibration or the burst of vibration.
Why ? This adds a level of customization to the watch.
Also, I see people complaining that the watch doesn't vibrate enough while in my case, its vibration time is too long. By having the ability to shortening the vibrate time, you also save battery life (if not by much).
By having all 3 features embedded into the ROM, On the average user, it should increase battery life by almost double (if not more).
Click to expand...
Click to collapse
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Can't you turn off notifications for certain apps in the Android Wear app (mute apps)?
HuStLaZ said:
Can't you turn off notifications for certain apps in the Android Wear app (mute apps)?
Click to expand...
Click to collapse
Im not talking about turning off notifications all together.
I was talking about turning off the vibration for certain apps, but still having the notifications pushed to the Moto360 display.
Number 2 can already be done you can go to the Android Wear App in Setting Click Block App Notification then Pick Whatever App u want to mute
Oops didn't see the last comment
kingcliff00 said:
Number 2 can already be done you can go to the Android Wear App in Setting Click Block App Notification then Pick Whatever App u want to mute
Oops didn't see the last comment
Click to expand...
Click to collapse
Lol
Already found that setting.
Not what I was looking for. lol.
anthonyg45157 said:
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Click to expand...
Click to collapse
I like this idea because sometimes it's hard getting the watch to light up with motion, so turning off that feature for when it does work would be fine.
In my case, I have the phone vibration turned off and rely on the watch to deliver notifications.
My one and only important feature request is the ability to create my own canned response list.
Of course, official support for 3rd party keyboards would be nice as well.
Bluetooth LE Peripheral Mode
I'm not sure if they intend to include Bluetooth LE Peripheral Mode in their Lollipop release. Google chose not to include peripheral mode for the Nexus 5 and Nexus 7, although it is included with the newer Nexus 6 and 9. But for Android Wear, Peripheral Mode would enable a huge number of new and useful apps, that would significantly improve the usefulness of the watch. The simplest one would be a beacon to help you find your watch when you forgot where you left it, but enabling service solicitation would open a whole new world of applications for the watch.
#1 has worked since day one.
I get a notification, my phone remains silent, the watch vibrates. It's in the AW app settings.
according to me, since the watch has a inbuilt mic, a feature can be added that when someone calls, answer from the watch, just speak that you'll call back later & disconnect. this will be helpful if you are driving... no need to pick the phone ...
pratik_193 said:
according to me, since the watch has a inbuilt mic, a feature can be added that when someone calls, answer from the watch, just speak that you'll call back later & disconnect. this will be helpful if you are driving... no need to pick the phone ...
Click to expand...
Click to collapse
Instead of swiping to answer the call, You can just swipe upwards to reject call with similar messages sent automatically
Sent from my SM-N910C using Tapatalk 2
Good list, I have one more. Allow the setting of alarms for only certain days. For example, I would like to be able to set an alarm at 7 PM that goes off only on weekdays and not weekends, as I use this to let me know when I can get into the car pool lane when I am driving back home from work. That alarm is useless on the weekend, so no need for it to be turned on every day.
apgrovas said:
Good list, I have one more. Allow the setting of alarms for only certain days. For example, I would like to be able to set an alarm at 7 PM that goes off only on weekdays and not weekends, as I use this to let me know when I can get into the car pool lane when I am driving back home from work. That alarm is useless on the weekend, so no need for it to be turned on every day.
Click to expand...
Click to collapse
Just select the days you would in alarm setup, do not check saturday and sunday
I am still wondering which watch support Bluetooth peripheral?
As I know LG G watch 5.0.1 do not support it.
if (mBluetoothAdapter.isMultipleAdvertisementSupported()) {
will return false.
on mine the whole notification thing is messed up..
sometimes it will vibrate and pop up when i get a text or email.. but then sometimes it doesnt do anything at all.
hardly ever, does it vibrate when i get a fb IM.. but it pops up and the screen lights up.
maybe they should fix it first before adding anything.
anthonyg45157 said:
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Click to expand...
Click to collapse
Quoting myself because my wish came true!! Props to moto
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
aarons6 said:
on mine the whole notification thing is messed up..
sometimes it will vibrate and pop up when i get a text or email.. but then sometimes it doesnt do anything at all.
hardly ever, does it vibrate when i get a fb IM.. but it pops up and the screen lights up.
maybe they should fix it first before adding anything.
Click to expand...
Click to collapse
Pretty sure vibration is app dependent. Example, 8sms. You can change the vibration length in the settings. If you set your phone to 1000ms vibration when you get a text your phone AND watch will vibrate for 1000ms(or whatever vibration pattern you set) To further my point I would NEVER feel the vibration of Snapchat updates because it was so short. I'm using xposed(gravity box) to change snapchats vibration length and I feel the notification on my watch and phone every time.
I agree 100% google should have a universal setting to be able to change vibration,notification, and screen light up settings.
anthonyg45157 said:
Quoting myself because my wish came true!! Props to moto
Click to expand...
Click to collapse
OK, so how do you turn off the auto-on option?
GuyInDogSuit said:
OK, so how do you turn off the auto-on option?
Click to expand...
Click to collapse
Have some of you even checked all options in the android wear app? let alone even opened it? seriously start looking around and you'll find it.
goa200 said:
Have some of you even checked all options in the android wear app? let alone even opened it? seriously start looking around and you'll find it.
Click to expand...
Click to collapse
I have.
If I am reading on my phone and a call comes in I don't get any visual popup to answer or decline. The phone rings but I have to pull down the notification bar in order to answer.
I usually keep do not disturb on at all times with only favorites allowed through so don't know if it's the problem or something else is.
For example, if one of my kids calls I hear it ring but I have to search/ take extra steps in order to answer the call.
This only seems to happen with the screen on. I believe it works fine when screen is off.
How do I fix this?
Any help would be appreciated.
reaper36 said:
If I am reading on my phone and a call comes in I don't get any visual popup to answer or decline. The phone rings but I have to pull down the notification bar in order to answer.
I usually keep do not disturb on at all times with only favorites allowed through so don't know if it's the problem or something else is.
For example, if one of my kids calls I hear it ring but I have to search/ take extra steps in order to answer the call.
This only seems to happen with the screen on. I believe it works fine when screen is off.
How do I fix this?
Any help would be appreciated.
Click to expand...
Click to collapse
It's in phone settings. See my screenshots.
Mr. Orange 645 said:
It's in phone settings. See my screenshots.
Click to expand...
Click to collapse
Thanks. I actually already had that setting checked.
I ended up finding another setting that seems to have fixed it. Can't remember where I found it but as long as it's working........
Glad you found it, had the same problem and I think I found the setting you did. For anyone else with this problem, in the Do Not Disturb setting, under Hide Notifications, there are settings that can be toggled for both screen on and screen off situations. Adjusting these should fix the issues.
Cheers,