Hi guys I have a little problem, my EVO started to bootloop without any reasons.
It can't pass the white HTC, and cant get to recovery.
It was rooted on unrevoke long time ago and last rom (rooted stock rom) and kernel (antrax) was loaded like 3-4 weeks ago. All worked fine till today, and now it's bootlooping like crazy.
I have H-boot 2.10.0001
radio 2.15.00.12.19.
I took the sd out, cleard the storage but still nothing.
Any ideas how to fix this issue.
Sounds like what mine was doing a few weeks back. I used the bootloader to ruu it back to stock and took it to sprint, a couple solder points broke loose on the motherboard. They couldn't fix it so they replaced it. Had my replacement rooted the same day.
Sent from my PC36100 using Tapatalk 2
Do you have a link where I can read how to do that? and download ruu?
I wil try to load a rom through the hboot first.
http://forum.xda-developers.com/showthread.php?p=25587635
Going back to completely stock?
Sent from my PC36100 using Tapatalk 2
I did push S-ON and RUU but I cant get the s-on to show up.
(I did used older RUU, should I use the latest one?)
Any ideas?
I don't know, that pc36img worked for me. I'm at a loss
Sent from my PC36100 using Tapatalk 2
Which RUU did you flash?
The 4.54 update
I don't know if it made a difference but I flashed the s on image first
Sent from my PC36100 using Tapatalk 2
There are two names for those files
RUU and PC36, which one? I bet this is all the same
One more question, when you flashed S-on could you see it right away
after the re-boot?
The ruu I ran was named a pc36img so I could run it thru the bootloader. And yes when I rebooted I was s on
Sent from my PC36100 using Tapatalk 2
I did flash that s-on like 10 times and still shows s-off
this phone is starting to make me angry
thx
thanks for all your help and keep it up with the good job :good:
I don't know what else to tell u, maybe someone else will chime in. Sorry bro
Sent from my PC36100 using Tapatalk 2
Try this think it will work for your version I don't have the evo on hands atm or I would try to help ya out.
http://www.youtube.com/watch?v=lvMw0vBYE7c&list=PLAD16397521C08D37&index=16&feature=plpp_video
Sent from my htc_jewel using XDA
I can flash everything thru the hboot but I just can't get the s-on
and I don't think doing RUU.exe will fix that
I say just take it in to sprint with a stockish rom they shouldn't have a problem with it being rooted well at least I never had one..and if they do just take it home and keep trying to unroot.
Sent from my htc_jewel using XDA
Yes uber numismatic correct if they can boot it up and see s on but can't get past boot then to them that's stock they will try the number combination to factory reset and all if it doesn't work then you get a new phone
Sent from my PC36100 using XDA
Try the procedure in my Sig for unrooting Revolutionary. That should take care of it.
I did try all the options and still nothing.
I went to sprint store, show them what is going on and they said wait, I will fix it in 15 min.
Well, he had 2 news for me, first - good - I can upgrade my phone
second - bad - still boot loops because I have water damage - BS
My phone was never near the water and battery indicator is like brand new.
I will open the phone and look what are they talking about.
I'm done with Sprint and their ****ty service and warranty policy.
I open my phone and that's what I found - do you guys think this should qualify as a water damage, because to me it's not even close, they just want me to upgrade and stay with sprint
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
maybe this will help someone out there/dev? in getting back
to stock froyo from the ota gb update..?
ive tried it myself im on stock ota gb 2.3 & i renamed it PG32IMG opened my bootloader it read it completly but after it tried to flash it said "main version is older..FAILED" or something like that..
heres the file just download it and rename to PG32IMG
maybe someone can get it closer to where i got it
PG32IMG_RUU_Vivo_W_VERIZON_WWE_1.34.605.4_Radio_0. 99.01.0225_2_NV_VZW1.92_release_182876_signed.zip
http://www.multiupload.com/73VYN7C9J0
30cb90e5c7c5f5ecb8a618fbbbdea06d
Sorry for being naive. Can this be used to upgrade a standard Inc 2 to Gingerbread?
sgiitk said:
Sorry for being naive. Can this be used to upgrade a standard Inc 2 to Gingerbread?
Click to expand...
Click to collapse
No, this is a Froyo ROM for the DI2.
I'm not telling anyone to try this right now but, shouldn't you rename it to update.zip, place on SD card, and apply update.zip? Since it is official HTC firmware, I don't see why it wouldn't work. But then again, I've never owned an HTC device in my life so.... yeh.
Sent from my DROID X2 using XDA Premium App
Avelnan said:
I'm not telling anyone to try this right now but, shouldn't you rename it to update.zip, place on SD card, and apply update.zip? Since it is official HTC firmware, I don't see why it wouldn't work. But then again, I've never owned an HTC device in my life so.... yeh.
Sent from my DROID X2 using XDA Premium App
Click to expand...
Click to collapse
if you are rooted with s-off the idea may work,but coming from a stock 2.3
gb us folks dont have s-off nor a recovery so its not possible for that unless
somehow we can get s-off and root,it was just a test i wanted to try and and see
where it would go
Yeah but can't you do it from stock recovery? My Fascinate was able to do something like this as well but on not so sure about HTC devices.
Sent from my DROID X2 using XDA Premium App
Its an RUU not an update.zip, it will not flash through recovery.
You can't flash it because you can't downgrade without temp root.
On the inc 1, we have RUUs that can be flashed in hboot. I think that's the gist of what he was saying?
Shipped ROMs
I downloaded the the Dinc2 Froyo from Shipped ROMs, ran the exe and while the RUU was asking for the connection, I went to my C:/_TEMP folder and found the data1.cab was 317 mb. in a folder with 22 different language .ini files.
the rom.zip was 313 mb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think this is the one to rename to what the stock bootloader is looking for.
I don't have my DInc2 yet but if it comes with GB forcefed on it, I will try this..
If u change the file and rezip it wont flash cause its not signed lol. Dont waste ur time trying little tweaks they have already been tried..
Sent from my ADR6350 using XDA App
so i flash ics from the international on and it word bad thing is that it wont connect to my pc and i dont have a modem so i can make no call but hey it works
can some one help me cuz i really need my phone to work again i fell so dumb for doing this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are you using an international GS2?
No.
Then why the heck would you flash an international rom?
well i was think they were all the same
If the past threads are any indication your pretty much out of luck.
Sent from my SPH-D710 using xda premium
Try using Odin to go back to full stock if you can get into download mode. I think that's your only hope
Sent from my Nexus S 4G using Tapatalk
I think only mobile odin might be able to help you as you cannot see the device n your computer. If you can get the APK for mobile odin which can be found on XDA, put it on you sd card an install, then get an stock odin Rom and run it from your phone.
Can you also edit your title of this thread, it is pretty deceiving...
Hopefully this method works for you.
Yes I agree quite a few people have done this and lets not have anyone else get themselves caught up like you did. Please change the title and edit out your first post stating what happened to you... Good Luck
You're lucky it even booted and that it is not completely FUBARed. Since you can't connect to odin, as stated, try mobile ODIN.
iSkylla said:
You're lucky it even booted and that it is not completely FUBARed. Since you can't connect to odin, as stated, try mobile ODIN.
Click to expand...
Click to collapse
Yup, Mobile Odin is the only option if you can't connect to PC
Sent from my SPH-D710 using xda premium
i hear that the bluetooth is the only radio that works. so. get the mobile odin apk, bluetooth transfer that over and hopefully you have a ODIN rom on there already cuz, frankly, it will be an insane pain in the ass to transfer one over bluetooth.
I guess a kernel/recovery would be easier and get your usb connected...
good luck.
well it look like im have to Bluetooth everything in a min imma put a video of the damage i have done to myself
http://www.youtube.com/watch?v=taoPP4jeLCY&feature=youtu.be
ppcpirate said:
Click to expand...
Click to collapse
/thread
Just to add more salt to the OP's wound: lulz.
Listen to the guys who are telling you to flash back through mobile ODIN, that's probably the only way you're going to get back to a normal working state on your phone.
IMO there are two hurdles with Mobile ODIN:
1) I believe it requires root, which you wouldn't have after flashing the stock Intl software
2) If this phone isn't being recognized even when it can be booted to ODIN D/L mode, then the USB support in the bootloader is already messed up. I don't believe Mobile ODIN can flash the bootloader
Hopefully I'm wrong and you can get it working.
Flash a kernel with clockwork on mobile odin... And then flash everything u need
Sent from my SPH-D710 using XDA App
There is a Guy on the forums that can jTag it. Should work, but i do believe his services come with a fee.
Sent from my SPH-D710 using xda premium
I did the same thing to my phone
Sorry to be the person with the worst news that you really dont want to hear but
the phone is toast......there is only one option that can help you .....JTAG this is a service that fixes this for 50 bucks they will reflash the system back to it and get it working again mobile odin wont work because when you flashed the rom it took out the root so mobile wont work only way is 1 jtag service or if your lucky like i was send it back(within warranty period) and say it was a bad flash of an ota update that came through .......hope this helps but i have did this and everything you could think is not gonna work only what i just told you trust me it pissed me off so bad that i didn't read the post before i flashed it
Really sorry to hear.
This could be why manufacturers want to lock the bootloader so this doesn't happen.
You wouldn't think someone who would attempt this would be this foolish...
I recently got a Samsung Epic 4G Touch and immediately flashed the system to ICS, using SFHub's stock rooted FF18.
Phone works great with that rom. But I was trying to apply Kobridge's tweak pack and discovered that recovery is not letting me install .zip files.
I reboot into recovery fine, and can choose "apply update from sd card .zip" fine. I can navigate to the file fine. When I select it though, it immediately switches to an android bot lying down, with its hood open and a red triangle above it.
I then have to pull the battery to re-boot the phone. It boots into normal startup fine, but the tweak has not been applied.
I tried several versions, and other zips, and it doesn't seem to want to let me install anything that way.
Ideas? I'd rather not have to put CWM on the phone or a different rom on the phone just yet.
That is because the install update zips are for official sprint/Samsung upgrades. To flash those you need CWM.
Sent from my SPH-D710 using xda app-developers app
You're going to need CWM or another custom recovery to flash anything on your phone
Now I feel like an idiot. I thought the version I got had a working recovery in it, but you're right - it didn't.
I installed Agat's and it's working fine now.
Thanks for the help!
No problem. Your not an idiot. It's alittle confusing sometimes.
Sent from my SPH-D710 using xda app-developers app
g_ding84 said:
No problem. Your not an idiot. It's alittle confusing sometimes.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
No problem and I agree. You're not an idiot. It's also better to ask questions than it is to end up with a very expensive paperweight because you tried to figure things out on your own like some of us have done.
ROOTED Verizon GS4 & Safestrap ROM install ERROR
Good day everyone!
I seem to have bumped into a problem im hoping someone on here can possibly help with.
I successfully rooted my Verizon Galaxy S4 on ME7 and got safestrap installed. I followed all the steps correctly then
I downloaded the Hyperdrive ROM but when I get to the install step for the ROM, it gives me a error saying "The zip cannot be flashed " or something of that matter. Anyone know a way to fix this or work around it?
Anyones help is truly appreciated.
eQwizzy said:
Good day everyone!
I seem to have bumped into a problem im hoping someone on here can possibly help with.
I successfully rooted my Verizon Galaxy S4 on ME7 and got safestrap installed. I followed all the steps correctly then
I downloaded the Hyperdrive ROM but when I get to the install step for the ROM, it gives me a error saying "The zip cannot be flashed " or something of that matter. Anyone know a way to fix this or work around it?
Anyones help is truly appreciated.
Click to expand...
Click to collapse
This is the E4GT forum. You need to head over to the S4 forum, specifically the OP for Hyperdrive.
Sent from my SPH-L710 using xda premium
eQwizzy said:
Good day everyone!
I seem to have bumped into a problem im hoping someone on here can possibly help with.
I successfully rooted my Verizon Galaxy S4 on ME7 and got safestrap installed. I followed all the steps correctly then
I downloaded the Hyperdrive ROM but when I get to the install step for the ROM, it gives me a error saying "The zip cannot be flashed " or something of that matter. Anyone know a way to fix this or work around it?
Anyones help is truly appreciated.
Click to expand...
Click to collapse
Even though you're in the wrong forum... It sounds like a bad download, try redownloading the ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just received my new One X and low and behold it is S Off and SuperCID. Just curious if this is of any help to any developer out there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One X using Tapatalk 2
Lucky one...
There has been many examples of this but I'm afraid it doesn't help. Some developers already have devices s-off by official ways.
Sent from my HTC One X using xda app-developers app
Well that's rather unfortunate. I just figured I would try and help the community lol oh well
You could always swap it for my s-on hox, that would be helping the community (well helping me)
Sent from my HTC One X using xda premium
Haha would you be surprised if I told you that you weren't the first person that tried to get it from me? lol
Not in the slightest lol
Enjoy your s-off hox (but guard it closely)
Sent from my HTC One X using xda premium
Do you first have to unlock your bootloader with htcdev to be able to open that screen?
No you just reboot in bootloader
Draciel882 said:
No you just reboot in bootloader
Click to expand...
Click to collapse
I just tried that and my phone just booted up normally but it took longer than usual. And I got a message that said something like ''Your HTC phone just recovered from something unusual. Do you want to send an error report to HTC?''
So that means my phone is S-ON right?
Wow this is very disturbing.
Please don't try this again.It's clear that you don't have the knowledge required to mess with the phone.
uqadwe said:
Wow this is very disturbing.
Please don't try this again.It's clear that you don't have the knowledge required to mess with the phone.
Click to expand...
Click to collapse
I just wanted to see if my phone is S-OFF or S-ON.
I don't think I've damaged the phone just by trying to open it once on the bootloader even though its locked.
I am sure you didn't damaged the phone.
Do you know how to get in the bootloader?
I think that's the problem...
uqadwe said:
I am sure you didn't damaged the phone.
Do you know how to get in the bootloader?
I think that's the problem...
Click to expand...
Click to collapse
Press and hold volume down and power button simultaneously right?
Yes, or a fastboot command.
Did you get in the bootloader screen?
uqadwe said:
Yes, or a fastboot command.
Did you get in the bootloader screen?
Click to expand...
Click to collapse
Nope, like I said, phone just booted up slower than usual and then I got an error report message from HTC that said something like ''Your HTC has recovered from an unexpected error. Do you want to send a report to HTC?''
So I think I can assume my phone is S-OFF right?
No,
Reboot it again, select reboot from the power menu and don't release the volume button until you get in the bootloader.
Jonbero said:
Nope, like I said, phone just booted up slower than usual and then I got an error report message from HTC that said something like ''Your HTC has recovered from an unexpected error. Do you want to send a report to HTC?''
So I think I can assume my phone is S-OFF right?
Click to expand...
Click to collapse
Noooo u should boot into boot loader to know if it's s-off or no and u failed to boot into bootloader so u should try it again by pressing power and volume down simultaneously and don't leave them until u see boot loader screen
Oh, thanks guys. It seems like I didn't hold the buttons down for an adequate amount of time.
S-ON, bummer.
I wonder how long until everyone is able s-off... Can't wait.
Sent from my HTC One X using xda premium
Ive had this phone for about a week and it came with software version bell 20e on ICS. My WiFi worked but was only able to get gsm data speed.(below 3g). I tried flashing many ROMs but my WiFi wouldn't work on any of them (only on the ICS Rom the phone came with). Then I tried 2 unbrick method to try and flash a new baseband/firmware (not sure which is which)... the first one gave me the original Korean ROM with all the Korean apps(I believe it was 18f kdz). The second one gave me the att ROM (10f kdz). The Korean one gave me WiFi and data but I could not root (tries superoneclick a million times and also tried manual cmd method). The att one gave no WiFi and I haven't tried the data.
My main goal is to be rooted so I can flash cm 10 or 10.1 with at least 3g data and WiFi. I actually really like this phone but all these road bumps are making me want to settle with my old phone optimus 2x. Can anyone help me please? The phone came from China I believe. My carrier is fido in Canada.
Sent from my LG-P990 using xda app-developers app
Nobody? Looks like I'll have to figure it out myself.
Sent from my LG-P990 using xda app-developers app
This is my current software... non of the rooting methods seem to be working. Come on someone help me out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-SU640 using xda app-developers app
I'm new to the rooting but i use
http://forum.xda-developers.com/showthread.php?t=2044645
[GUIDE] Rooting and Unbricking p930/p935/p936 to root I use to run cm 10.1 but it was very buggy I use http://forum.xda-developers.com/showthread.php?t=1980541
[ROM][P930] Liquid Nitro V6 [02-21-2013] hope this help u
Sent from my LG-P930 using xda premium
Thanks for the response. Did you get the root in one try using the TPSparky method?, becuase I'm on my 4th try now. My phone reboots two times, but the command window always says = 0 (root), And it needs to be id = 0 /root. But I'll keep trying..
The first link is what I use to unbreak and root
Sent from my LG-P930 using xda premium
FINALLY, I'm rooted. I had to change some things around in the Path Variable string, then i tried Superoneclick first try rooted. Now Installing CMW and flashing roms, I assume i just download Rom Manager from the play store and flash cmw like that right?
So.. Is my phone bricked completely? I tried using cmd to flash 2.3.5 ATT stock.. when i typed in the first code (dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8) to put boot.img from sdcard to phone, it said that there was no space. However the other codes worked just fine. Then when i turned off the phone to try and put it in recovery mode as the guide instructed my phone screen remains off. Is my phone dead?
Ouch not a good sign. You will know by this hold down volume up and plug into the computer if it goes into download mode you are good but if the screen stays off and the computer gives you an error it is dead and will need to be sent off for repair. Good luck.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Ouch not a good sign. You will know by this hold down volume up and plug into the computer if it goes into download mode you are good but if the screen stays off and the computer gives you an error it is dead and will need to be sent off for repair. Good luck.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Yea its dead, no response from my phone. Only flashing notification lights. Lol, i only had this phone for about a week. Thanks for the response.