[Q] Does USB charging harm the battery ? - Xperia Arc Q&A, Help & Troubleshooting

I mean compare to wall AC charger, that is.
question.................................

no
charging a battery is always very "difficult" for the battery. if you charge not so fast, the battery wont get hot anymore and it's better for battery life. but it takes 2h 30 minutes and with a/c you need 1h

nope..not at all..usb charging gives very less amount of energy compared to AC charging..thats why it takes more time to charge and it is completely safe

arpith.fbi said:
nope..not at all..usb charging gives very less amount of energy compared to AC charging..thats why it takes more time to charge and it is completely safe
Click to expand...
Click to collapse
True. I prefer charging my phone by USB. This way my phone never gets hot. If your don't have time then use AC charging.
Sent from my HTC One V using XDA

but whatever happens just avoid car charging!! its can do more damage than we can imagine

arpith.fbi said:
but whatever happens just avoid car charging!! its can do more damage than we can imagine
Click to expand...
Click to collapse
And why is that?
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2

xtacy! said:
And why is that?
Click to expand...
Click to collapse
Becoz car battery does not give stable electricity and output with variance electricity that may damage your battery.

arpith.fbi said:
Becoz car battery does not give stable electricity and output with variance electricity that may damage your battery.
Click to expand...
Click to collapse
That's the chargers job.
Sent from my LT18i using Tapatalk 2

I've got no idea if its safe for the battery, I prefer AC, I never charge my arc over the computer. What about the difference between USB and AC is that AC gives you 850mA an the computer USB(2.0) only 500mA!

Car chargers are safe as long as they are decently made (Fully Regulated). A good regulated Car charger is just as safe as any other charger.
Lithium Batteries are pretty hardy as far as charging goes. (just dont over charge or fully discharge)
as far as USB is concerned, some USB2 ports will supply up to 900ma,
I charge my phone on my Tablet charger all the time (2000ma or 2Amp) simply because it is FAST. sure the phone gets warm but the phone/charger will regulate the charge as it needs to.
it is also good to note that the quality of the charger is very important.
cheep charger = more likely to damage battery as well as cause funny issues with the phone when plugged in.
Pvy.

Exactly. Your battery will prevent it from getting over charged. It's safe.
Personally, I use Nokia chargers as they deliver a higher output.
Nokia AC-10N gives an output of 1,200mA. [Home - AC wall charger with a long cable]
Nokia DC-20 gives an output of 1,000mA. [Car charger with dual USB ports; both ports output 1A each].
Been using both for a long time now without any issues. Didn't go for the SE chargers because of the lower output, which takes longer to charge the phone.
And to the OP, USB charging is safe.
Swyped from my SE Xperia arc (LT15i) using Tapatalk 2

Related

[Q] Charging Current

Hi All,
Was wondering if anyone knows the maximum current the SGS2 can draw for charging purposes. I had a look at the wall charger provided with it, and it's 0.7a; it takes forever (my opinion) to charge compared to my last phone. Just wondering if it is worth my while investing in a more powerful charger.
Cheers
If you take the battery out and look and the sticker then it says there 1000mA
Excellent thanks; Can't get the back off my phone (fingernails).
oozrafa said:
If you take the battery out and look and the sticker then it says there 1000mA
Click to expand...
Click to collapse
Also, at the start of the SGS2 charging cycle, my wall-plug power meter reads 5.1 W.
5.1 is what the adapter is pulling. All of that isn't getting to the phone. Funny thing for my is the phone charges faster off my blackberry 0.75a charger then it does off my Galaxy I 1a charger.
Sent from my GT-I9100 using XDA Premium App
Someone in another thread mentioned seeing something in the source code about the phone drawing at most 650 mA (instead of a more typical 1000 mA) during charging. If that's the case, a more powerful charger by itself won't help; you'd also need a custom ROM that doesn't limit the charge current.
Does anyone know why Samsung would limit the charge current?
theinstagator said:
Does anyone know why Samsung would limit the charge current?
Click to expand...
Click to collapse
Speculation is that its a heat related problem. Don't want to pull a Sony and have the batteries explode on people... (but again, that's speculation)
Murfle said:
Speculation is that its a heat related problem. Don't want to pull a Sony and have the batteries explode on people... (but again, that's speculation)
Click to expand...
Click to collapse
I also heard that a smaller charging current extends the Li-ion battery's lifetime, even though I'd prefer quicker charging as the battery can be replaced with ease.
I second that. I tried it today with a 1A car charger (USB cig. plug) can't say it made a difference on speed of charge compared to wall one.
Just received my SGSII and the charging is extremely slow. 3+ hours = about 500 mAh, on a 1A wall charger. Never had such a slow charging smartphone before
To change i9100 charging current you have to short r529 or r531
Current limit will change to 1000mA
You can use 2A charger and phone will charge only with 650mA current
But after this short one of those resistors current limit will change to 1A
I use it on my phone and all is fine. Current after change is measured.
Wath this film youtube.com/watch?v=FL71G2YEIHU
Make shortcut of resistor and check your new current and feel the difference.
Is there a logfile, where I can see which charge current is used?
I have the suspicion, that my noname charger is not recognized properly and it only charges with USB current (450mA).
hmm a 1000mA current could be used also for the 2000mAh battery?
Yes, should not depend on the capacity of the battery.
Sent from my GT-I9100 using xda app-developers app
good
thank for all, it help me so much
1000mA is more likely the maximum current that the phone is expected to drain from the battery.
It is not the battery charging current, which is presumably equal to the mentioned 650mA, since the 1650mAh battery charges in about 4 hours.
If the charging current was actually 1000mA, then the 1650mA battery it would charge in 2 hours or so, but as we all know, it is not so, even with a 2A charger.
mine took about 4 hours charge the battery
The charging time depends on the Charger and Rom i use, i havent figured out for what reason.
Sometimes the SGS2 is charged in approx. 1 hour and with other Roms the charging time may take up to 3h.
kirschi said:
The charging time depends on the Charger and Rom i use, i havent figured out for what reason.
Sometimes the SGS2 is charged in approx. 1 hour and with other Roms the charging time may take up to 3h.
Click to expand...
Click to collapse
Definately 650ma, IF the phone detects an High current USB port, otherwise it falls back to lousy 400ma.
You can trick into 650ma always: take a usb cable, cut from the PC plug side the TX/RX cables, on the other side short them on PHONE plug side these two cables.
Phone will now always go into "AC charging mode". Don't worry (too much) for your USB ports, they can all well 1000ma, and the one that cannot will report "high current detected, port disable".
:fingers-crossed:

Compatibility with Nokia fast microUSB chargers

The Samsung charger adapter which comes in the box is very slow in nature. It take more than 2 hours to charge my phone. I was wondering if I can use the following Nokia brand chargers which are fast chargers?
Nokia Charger Adapter CA-146C
Nokia Fast Micro-USB Charger AC-10
It won't make any difference the phone decides what current it draws from the charger, so it'll take just as long to charge.
Are you really sure about this? Can you link me to some articles which confirm this.
Even I was thinking about purchasing AC-10 charger from Nokia.
How fast is the nokia charger?
0-10% -> 100% in an hour or less?
Joey2o11 said:
It won't make any difference the phone decides what current it draws from the charger, so it'll take just as long to charge.
Click to expand...
Click to collapse
I'm not sure about this. I have a friend with a Blackberry Playbook and he reckons his phone charges much faster if he uses the charger from that.
The "stock" S2 charger is 700mA - it doesn't take a genius to work out that for a 1650mAh battery this will take about 2.5 hours to fully charge the battery under ideal conditions (phone off) or anything from 3-6 hours with the phone on, depending all what's running or if you're using the phone while it's charging.
Which is all pretty ridiculous - ok we're comparing apples and oranges when we compare a S2 to the likesw of a Nokia, but I do miss the days when I could charge my phone in an hour and have it last two or three days. I thought my Blackberry was bad but at least I can usually squeeze a full day out of it...
The only wall wart I had lying around that was more than 700mA was a 5V 2A supply. I've tried with that which works, but the phone chokes with a "battery overtemp" warning after about 10 minutes - which tells me I AM pumping more into the battery than it can handle. This would suggest that there IS a happy medium where we can optimize the battery charge time - I'm bust looking for a 1A supply...
I have TWO AC-10Xs, and am using it with the Ninphetamene kernel (which comes with increased charge input mods to 800ma) fine. Charges to full in about 2.5-3 hours.
I've never gotten overcharge errors either.
Hi,the usage of more powerful charger will eventually reduce lifespan of your battery. This comes from basic physics, materials and so... Higher mA means faster current, which wear the material of the capacitor - battery.
I have capdase 2 USB car charger that was used for my old iphone device.
It outputs 1A.
is it safe to use it?
I tried to charge with it for 10-15minutes or so, and didnt recognize any suspicious warmups...it reached 41~degrees while at the moment im charging and using it as a hotspot and its on 38 degrees.
DobermanS said:
Hi,the usage of more powerful charger will eventually reduce lifespan of your battery. This comes from basic physics, materials and so... Higher mA means faster current, which wear the material of the capacitor - battery.
Click to expand...
Click to collapse
The phone (specifically, the kernel) limits charge coming in, and there MUST be hardware limiters on the batteries and the phone themselves (which, in some cheapo batteries DON'T WORK and results in them frying themselves and the phone in process) and the batteries are replaceable anyway.
eranyanay said:
I have capdase 2 USB car charger that was used for my old iphone device.
It outputs 1A.
is it safe to use it?
I tried to charge with it for 10-15minutes or so, and didnt recognize any suspicious warmups...it reached 41~degrees while at the moment im charging and using it as a hotspot and its on 38 degrees.
Click to expand...
Click to collapse
i use htc wall charger rated at 1A and having no proplem with ,a pc USB port is capable of 1A and we all know there are no problem ,even so there are no visible improvement in charging time because as someone said the charging current is automatically regulated
ledavi said:
i use htc wall charger rated at 1A and having no proplem with ,a pc USB port is capable of 1A and we all know there are no problem ,even so there are no visible improvement in charging time because as someone said the charging current is automatically regulated
Click to expand...
Click to collapse
That's good to know that the current is regulated by the device.
Is there a software to see what is the current taken by the phone?
As long ad the temperture isn't higher than 45degrees is it ok?
By the way, Im pretty sure that usb outputs 0.5A and not 1A
Sent from my GT-I9100 using XDA Premium App
battery monitor widget
It seems logical to be able to use all chargers as smartphones all have micro usb .
(I 'm not sute that's mean something in english, sorry)
Great widget! thanks.
I really like the data it gives!
Sadly, while charging with my .7A original charger & meanwhile giving a hotspot to my laptop, it shows that only 76mA comes in!
hehe, gonna take forever to charge the battery this way.
i doubt this. i'm still worried about the compatible problem~~~
After two days with the battery monitor widget Im affraid itself it drains the battery.
could it be it affects the battery?
settings are regular, it monitors changes every 60seconds
Let's see if I can help make things a bit clearer. Feel free to correct where I may be off.
The Nokia thing, it's not a charger. It's a power supply.
The "charger" is built into your phone, hardware-wise.
How can I prove it?
Take the Samsung supplied cable, plug it into your computer. You'll see that your phone is charging too. No, the cable is not a charger. Do you think your computer is a special built charger for your phone? Hardly.
The charging circuit is within the phone, and thus charging the battery when there's available power.
Ok, so we have the charger (i.e. the mobile phone), we have the battery, we need the power. Where do we get power from? The wall adapters (or computers). So what are the wall adapters? Ratings of 1000mah means that the wall adapter can provide up to 1000ma per hour.
However, your charging circuit will determine how much current to actually draw. For example, drawing 800mah for 10 min may raise the temperature to 55 degrees, so after 10 min the charging circuit drops the charging current to 500mah.
Of course, if you're using el cheapo cables, some cables may not be able to support the current draw and you may find that even with 20000000mah power supplies your phone can only draw 100mah.
The SGS2 heats up pretty easily, and it doesn't quite draw beyond 700mah. The circuit built into the phone doesn't allow it to, if i'm not wrong. If your phone is overheating while charging, you better change your case as it's going to cause your phone to overheat sooner or later.
Using a 20000000mah power supply isn't an issue, because the charging circuit within the phone will be able to draw only a certain amount.
Me, I plug my SGS2 into a 2Ah charger every night to charge, and yes it's perfectly fine. I'm only upset that after buying an expensive 2A charger, I realised that the phone is not able to draw high currents (phone even heats up to 55degree Celsius when charging).
Charging the phone on a ice pack (which lowered the phone temperature to 16 degrees while charging) didn't increase the amount of current drawn by the phone, even on a 2A power supply.
My humble advise is, stick with the stock power supply, or at most get a 1A version. No need to splash for a 2A power supply. If you really need faster charging, get a battery charging dock.
eranyanay said:
After two days with the battery monitor widget Im affraid itself it drains the battery.
could it be it affects the battery?
settings are regular, it monitors changes every 60seconds
Click to expand...
Click to collapse
yes of course it does. It consumes a certain amount of ma per hour, doesn't it?
Personally, there's a app called watchdog, look for it, IMHO it helps to catch rouge apps better, and manage battery better.
I thought the whole idea of having a universal micro USB charging connection across most good brands was so you could use other chargers!
moooxooom said:
yes of course it does. It consumes a certain amount of ma per hour, doesn't it?
Personally, there's a app called watchdog, look for it, IMHO it helps to catch rouge apps better, and manage battery better.
Click to expand...
Click to collapse
Well I just like the widget, which shows me also the battery temperture
I hope it doesnt takes too much

[Q] Charger for the arc

Hi all,
During my recent trip to India, my arc's charger got fried during a power surge (EP800, output = 850mA). i went looking for a replacement but I only found the CST-80, output = 700mA but this makes my arc's screen go wonky. [The screen becomes totally unresponsive; the screen jumps; it unlocks by itself; screen powers on even if I switch it off by using the power button].
I'm currently using my laptop's USB port to charge my arc but as you all know, it takes longer to charge.
With my usage, the battery is exhausted by night. (I don't get the fantastic battery life that many claim).
My question is whether I can use chargers from different companies (with different outputs)? For example, the Nokia charger has an output of 1000mA; the Blackberry charger has an output of 1200mA. Even USB adapters (eg: Capdase) have an output higher than 850mA of the GreenHeart charger I received with my phone (EP800).
I would like to know if there's any harm in using one of these chargers? Can it harm my battery and in turn, my phone?
I hate to bump up the thread but I would really like some feedback on using Nokia & Blackberry chargers on the arc.
Can it harm my battery or phone in any way?
Just asking as I'm pretty sure that most of you would have at least one of the chargers.
Any and all feedback is appreciated.
Sent from my SE Xperia arc (LT15i) using Tapatalk.
I've used wall chargers from a variety of companies with varied outputs from 500mAh to 1,000mAh as well as the "Super Charger" USB ports on both Asus and MSI motherboards that have double the standard USB wattage (1,000mAh) without issue. Sony's own car charger, the AN-300, which I use daily is 700mAh.
The charging circuits in the phone should automatically regulate and stop it from charging when it's full. Charging shouldn't affect the phone's operating unless you're using an overvolt kernel or other CPU modification such as SetCPU.
xtacy! said:
Hi all,
During my recent trip to India, my arc's charger got fried during a power surge (EP800, output = 850mA). i went looking for a replacement but I only found the CST-80, output = 700mA but this makes my arc's screen go wonky. [The screen becomes totally unresponsive; the screen jumps; it unlocks by itself; screen powers on even if I switch it off by using the power button].
I'm currently using my laptop's USB port to charge my arc but as you all know, it takes longer to charge.
With my usage, the battery is exhausted by night. (I don't get the fantastic battery life that many claim).
My question is whether I can use chargers from different companies (with different outputs)? For example, the Nokia charger has an output of 1000mA; the Blackberry charger has an output of 1200mA. Even USB adapters (eg: Capdase) have an output higher than 850mA of the GreenHeart charger I received with my phone (EP800).
I would like to know if there's any harm in using one of these chargers? Can it harm my battery and in turn, my phone?
Click to expand...
Click to collapse
I've used a LG Pop charger (700mA) for 20 hours in total at least, and my phone was perfectly normal charging, only the charger made some annoying noise (not very loud and not continious), but both weren't damaged in any way.
I think that lower Amps won't do any harm, for higher Amps I don't dare to make a guess.
I use a htc wall charger for my neo and my arc, it is 1000 mah, no problems up to now, the only thing mAh does it influences the charging time
Sent from my MT15i using XDA App
I appreciate the replies guys. I think I can safely go and buy a higher mA charger.
I was mainly worried about leaving it to charge over-night (as that's what I normally tend to do).
i lose my charger too, and with other charger my screen get funny, the tactil gestures work wrong, theres is a problem with my arc?

Charger Concerns

I see that the wall charger for the Galaxy Nexus outputs 5V and 1A. Unfortunately, none of the extra chargers I'd like to use as additional chargers have this output. Some of them are 5.1V, and some of them all put out under 1A.
From what I understand, using a charger w/ a higher voltage could potentially damage the phone. I know that this unlikely considering it's only an extra .1V in my case, but I don't want to risk it.
As for the amps, I believe that using lower amps isn't dangerous, but may result in charging taking longer than normal.
Are these two assumptions correct? Also, does anyone know of any cheap chargers that put out 5V/1A? If you put in "phone charger" in Amazon, the second hit is a Samsung OEM charger that puts out 5V/0.7A, but I'd rather get one that is going to be an exact match.
700-800mah are fine and acceptable for charging. But if wanting to play games on a charger and still get some kind of charge, go with a 1000 mah charger. 1000 mah charger is also best to use while using mhl so you can hopefully not lose battery charge while streaming video over hdmi.
Sent from my samsung gt i9250 which is in the wrong country.
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Micro-Travel-Charger-M540/dp/B002HJBM04
http://www.amazon.com/Samsung-Travel-Charger-Adapter-MicroUSB/dp/B0049IE70I
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
alee said:
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
Click to expand...
Click to collapse
it's.. 24 bucks ... for a charger..
lol fml
Dmw017 said:
it's.. 24 bucks ... for a charger..
lol fml
Click to expand...
Click to collapse
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
alee said:
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
Click to expand...
Click to collapse
...you say it folds too huh :/ ....
but for that price, i wonder if there are any samsung chargers that are just as good if not better..
that is Apple, after all
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Dmw017 said:
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
Click to expand...
Click to collapse
Same one.
Good question on whether it's putting out a full 1A. I guess what I do is check the charge times tomorrow with a few different 1A chargers to see if it measures up.
I use this for home:
http://www.amazon.com/Cellet-Charger-Retractable-Cable-myTouch/dp/B004XVM1T0
And this for the car:
http://www.amazon.com/Griffin-Powerjolt-Dual-Universal-Micro/dp/B0042B9U8Q
Both are dual-USB and put out 1amp. Charges my GNEX and iPhone 4 (work) at the same time without issues.
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I've read that the wall charger drops the battery down to 90ish % after it hits 100% and just goes between the two levels until you unplug your charger
While a USB charge is slower and charges your device up to a "fuller" charge
...I may be unfathomably wrong though
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
man that little Apple charger is so damn cute ... lol , ill probably end up buying it once the 1A volt charge is confirmed
edit: just bought it lol, oh well.. it will probably maybe more or less somewhat possibly work like it should at 1A :}
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I'm not an expert on the subject but I was under the impression that cycles (charge + discharge) were a bigger factor on battery life than something like this. The longer a current is running through the battery (charge or discharge) is detrimental to it's life span.
Leaving a laptop plugged in all the time ruins its battery is my source on this one. I would say it's because it has a constant charge running through the battery.
qreffie said:
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That takes a lot longer vs plugging it into the wall
rashad1 said:
That takes a lot longer vs plugging it into the wall
Click to expand...
Click to collapse
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
[hfm] said:
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
500mA is the max before the PC will disable the port. So your actually get less current.
There are some ports, depending on the motherboard that have a option of outputting more power for charging devices, and also have the port powered when the computer is off. But a normal usb 2.0 port is limited to 500mA max per spec... so a normal usb 2.0 port charging a phone is drawing less then 500mA, or it would get and over current condition and disable the port.
I design electronics and work with USB and batteries often, so let me clear some stuff up in no particular order:
- PC ports are limited to 500mA so will only ever output a max of 500mA
- You can use a wall charger that outputs 1000mA but on most devices the data pins on the micro USB need to be shorted to tell the phone it can try to draw more than 500mA. This is true for HTC devices for example. That means if you get a cheap charger that doesn't short the data pins, when you plug your standard micro-usb cable into it, it will still only charge your phone at 500mA.
- The charging controller is actually in the phone. It decides based on temperature (there's a sensor in the battery), current, voltage across the battery (current charge) and characteristics of the type of battery to figure out how much current to allow into the battery. Although its true that a 500mA charger may have different affects than 1000mA chargers, there usually is very little perceivable difference. Which is (slightly) better really depends on the charging controller and how it decides when to stop charging.
- When the battery is full, the phone continues to 'trickle charge' for a period of time. This isn't a bad thing. Overcharging a Lithium battery can be extremely dangerous, so normal charging occurs at a high speed and then slows down at a safe limit below the 'true' 100%. After that the phone continues to trickle charge to top up the battery. This is the reason you read in phone manuals you should charge the phone for 8 hours or overnight for its first charge.
- When charging at 500mA, the battery does not get as hot. This usually means you get closer to the true 100% before 'trickle charging' starts. With a 1000mA charge the battery heats up a lot more so charging may switch to trickle much sooner. Here's an example with made up figures.
Lets say you charge your battery with a 500mA charger, and it takes 2 hours. When the phone shows 100% it may actually be at 99%, and trickle charging. Leaving it for another 30 mins may take it to its full capacity.
Now, lets say you charge your battery with a 1000mA charger, and it takes 1 hour. When the phone shows 100% it may actually be at 98%, and trickle charging - It stopped sooner because the battery was hotter. Leaving it for another 30 mins may take it to full capacity.
Conclusion.. the 500mA charger took 2.5 hours, while the 1000mA charger took 1.5 hours. However if you unplugged both when the phone showed 100%, the 500mA charged battery may last longer, and so you think the 500mA somehow resulted in a more thorough charge!
At the end of the day, it doesn't matter which you use. the absolute charge cycles is what counts. Charge to 100%, then dont charge till its 0 for best battery care. Constantly plugging into a charger or dock all day on and off is bad. But having said that, your phone is there to be used, so a sensible balance of the two is the best bet.
Thank you so much for the detailed response, kam187. Would you recommend avoiding using a 5.1V charger, considering the phone came with a 5V charger?
Sent from my Galaxy Nexus using Tapatalk
I wouldn't use it. The 0.1v probably won't make any difference, but it may not be regulated. Chargers with these odd values sometimes don't have any regulator inside them. That could damage your phone as the voltage could shoot up and down as the current draw changes.
Just search amazon/ebay for any MicroUSB charger, and pick one from a reputable manufacturer like Motorola, HTC, Samsung etc. Since all phones now use MicroUSB, there's loads of these chargers around from previous phone models etc.
Here's just one I saw on amazon.com:
http://www.amazon.com/Samsung-Trave...E70I/ref=sr_1_3?ie=UTF8&qid=1322808220&sr=8-3

Highest Charging Current for One X

Hi all:
I just did a test on the maximum charging current of the One X using current measurement equipment, and it shows that the One X does not draw above 460mA of current while charging.
With this value, i suspect that the One X limits max charging current at 500mA, which means 3 things:
1) Using any previous generation USB charger (750mA or 850mA or 1A) is good enough. Attempting to use the iPad's charger (rated at 2A) WILL NOT get you faster charging time.
2) When using battery draining applications, the charging current may not be enough for you to both CHARGE and USE the Phone. Thus it might be a better idea to give your One X some dedicated charging time.
3) Some computer USB ports may specify 500mA of output current, but there are many times the available current is less than that. On my USB port, the charging current is only about 300mA at times. So it is better to use a dedicated charger if you have it available. Having that said, however, it is still ok to charge the One X with a USB port at 300mA, just that charging will take longer.
That's all I have to report. Useful information for all.
limestone said:
Useful information for all.
Click to expand...
Click to collapse
Useful indeed. Thanks
Sent from my HTC Vivid using XDA app
I've had mine charge at 780mAh+ before. 1amp HTC charger. Charge rate slows down at the last 20-30% or so. So from 70%-100% battery, charge rates normally slow to about 450mAh.
limestone said:
Hi all:
1) Using any previous generation USB charger (750mA or 850mA or 1A) is good enough. Attempting to use the iPad's charger (rated at 2A) WILL NOT get you faster charging time.
Useful information for all.
Click to expand...
Click to collapse
thanks a lot, i can confirm the statement above because my stock charger is broken and i'm using the ipad's one.
bye
i tried to use the charger for htc chacha and hd2..
both does not work.. red light will light up but after a while it will go off and the phone does not charge..
Charging my HOX while the phones working hard eventually (after say, 5 mins), causes the charge LED to flash green/red. I've had this twice now, once while playing a 720P HD film, and once when playing Glowball.
Both times the phone was very hot, so i'm not sure if the LED thing was to indicate that the battery was too hot to charge, or that the charger could not supply enough power to charge and power the phone at the same time.
fi3ry_icy said:
i tried to use the charger for htc chacha and hd2..
both does not work.. red light will light up but after a while it will go off and the phone does not charge..
Click to expand...
Click to collapse
I'm using my HD2 charger at work every day. It charges at about 400/500mA.
Original charger gives me 650/750mA (lowers at the end)
chaps said:
Charging my HOX while the phones working hard eventually (after say, 5 mins), causes the charge LED to flash green/red. I've had this twice now, once while playing a 720P HD film, and once when playing Glowball.
Both times the phone was very hot, so i'm not sure if the LED thing was to indicate that the battery was too hot to charge, or that the charger could not supply enough power to charge and power the phone at the same time.
Click to expand...
Click to collapse
If the charger cannot cope with the discharge from the game, a pop up message actually appears. If it's blinking means it's too hot. Try not to do anything intensive the last 20-30% remaining (meaning at 70-100% battery).
Nice info thanks
Sent from my HTC One X using XDA
fi3ry_icy said:
i tried to use the charger for htc chacha and hd2..
both does not work.. red light will light up but after a while it will go off and the phone does not charge..
Click to expand...
Click to collapse
Same here... I am using the Atrix 4G (US) charger, it does not charge the phone. The charger gives output of 850mA. It does charge when plugged into the laptop, but I think it will take very long that way.
*edit for posterity*
after a while (I did it when battery had charged to 20%), I could connect the Moto US charger, and it would show as "AC". It would not want to charge through it when the battery was really low (2%), but it would charge via USB in that case. Weird behavior, IMO.
USB limited to 500. AC limited to 1A.
Sent from my HTC One X using xda premium
If you want maximum speed of charging (AC charging) you need:
1A charger with shorted D+ and D- pins (eg, original HTC charger).
iPad charger probably doesn't have these pins shorted, so in this case phone will see it as USB charging (you can check it in settings->battery) and will limit charging current to 500mA. Also lot of aftermarket car chargers will work only in USB mode despite they are able to supply 1A.
Here you can find some info on USB Charging Ports (shorted D+- pins):
http://en.wikipedia.org/wiki/Universal_Serial_Bus#Charging_ports_and_accessory_charging_adapters
When charger is "USB", it will not draw more than 500mA from the charger, and usually it will not charge at all (because the current draw with screen on is higher than 500mA).
When charger is AC, it seems to draw 1000mA - but this is still too low to charge while phone is doing anything, as it will draw 700mA and charge ~250mA top.
I hope this can be tuned in kernel, because it sucks, I also hope that power source can be AC (and not battery - look in dmesg when charger is connected), because battery gets too hot when under load...
colin_ktp said:
If you want maximum speed of charging (AC charging) you need:
1A charger with shorted D+ and D- pins (eg, original HTC charger).
iPad charger probably doesn't have these pins shorted, so in this case phone will see it as USB charging (you can check it in settings->battery) and will limit charging current to 500mA. Also lot of aftermarket car chargers will work only in USB mode despite they are able to supply 1A.
Here you can find some info on USB Charging Ports (shorted D+- pins):
http://en.wikipedia.org/wiki/Universal_Serial_Bus#Charging_ports_and_accessory_charging_adapters
Click to expand...
Click to collapse
Can you post a potential list of car charger which are working at 1mA according to you?
I've only tested few devices:
Extrememac external battery for iPhone/iPad (max 2A) had pins not shorted - USB charging mode on One X (500mA).
Some cheap car adapters - max 1A (according to spec) - USB charging mode on One X.
To fox this problem you should prepare a USB extension cable or micro-usb cable with shorted D+ and D- pins and it should be recognized as AC adapter. I think that also some old HTC phone chargers might come with shorted pins in cable already, but don't know which...
What about the official HTC car charger?
MickyMax said:
What about the official HTC car charger?
Click to expand...
Click to collapse
Yes, that one will charge at the full rate.
There is no list of known good chargers - it's down to luck or a recommendation from someone who found one. You can be sure that any charger advertised as "iPhone, iPad or iPod" compatible will NOT charge your One X at the full rate.
I found one recently in a local petrol station shop. It was £5. I took it apart to have a look and the D+ and D- pins are correctly connected together (via a low value resistor) so it charges at the full rate.
So, I might suggest you look for the cheapest Chinese car charger you can.
USB charging not OK inside a car
zvieratko said:
When charger is "USB", it will not draw more than 500mA from the charger, and usually it will not charge at all (because the current draw with screen on is higher than 500mA).
When charger is AC, it seems to draw 1000mA - but this is still too low to charge while phone is doing anything, as it will draw 700mA and charge ~250mA top.
I hope this can be tuned in kernel, because it sucks, I also hope that power source can be AC (and not battery - look in dmesg when charger is connected), because battery gets too hot when under load...
Click to expand...
Click to collapse
Bingo. I also noticed that when I have the screen on at 100% brightness, GPS and Bluetooth on, i.e. in the car, the USB charger cannot even keep up with the battery drain.
On top of that, the battery gets really hot.
I did not have any of these issues with my SGS2, and frankly, I think it's very disappointing. One should at least be able to stay on the same battery level while doing nothing too fancy and on USB inside a car.
A380 said:
Bingo. I also noticed that when I have the screen on at 100% brightness, GPS and Bluetooth on, i.e. in the car, the USB charger cannot even keep up with the battery drain.
On top of that, the battery gets really hot.
I did not have any of these issues with my SGS2, and frankly, I think it's very disappointing. One should at least be able to stay on the same battery level while doing nothing too fancy and on USB inside a car.
Click to expand...
Click to collapse
There are a lot of factors in the charging current. When you charge, the battery will heat up during the process, especially towards the end of the charging cycle. If you are using your phone at the same time and cause even more heat and charging may slow down to prevent overheating. Also, as mentioned prior, charging slows down as capacity is reached. 100% brightness, GPS, and Bluetooth all on has always walked the fine line of just barely keeping up on my past phones on a 500 mA USB charger. On top of that, this phone is a lot more powerful than an SGS2 and the T3 and big screen produce more heat which may be slowing your charging more.
The problem is a lot of cheap chargers that the phone thinks are USB chargers, not AC chargers, thus causing them to only charge at 500 mA. If you have a proper charger, or a properly modified charger, you should get more like 1A, assuming conditions are right.
In the past I've used Battery Monitor Widget from the Play store to show my charging current on a widget, as well as track and graph battery use, charging current, temperature, etc. Might want to give it a try if you're more interested in charging details.
Im using my htc desire charger and cable (the one that splits in two). It works fine for me but it does take a while to get a full charge. Should i use the charger and cable that came with the phone?

Categories

Resources