Related
Hello,
I would like to use cifsmanager apps but I see that our kernel doesn't have the proper module built in.
I just updated the kernel and modules using the latest available in the the kernel build service (following the incremental updates guide):
http://xdandroid.com/wiki/Incremental_Updates
but I'm not able to insmod the module.
I also tried to manually download the cifs.ko module and to load it telling to cifsmanager app where the module is, but I continue to receive the same error, no such device, like if the module isn't loaded correctly.
How can I solve this problem?
Thank you
Why not just use adb...? I don't see the need for CIFS.
If you can figure out how to get CIFS working, we can look about implementing it mainline.
Have you tried insmodding it after cp'ing the .ko file to /lib/modules?
ok thank you,
I tried to load the module using adb, but I think I'm using a wrong file because when I try to load it insmod return me the "invalid module format" output.
I'm using the kernel downloaded here:
http://zimages.googlecode.com/files/htc-msm-linux-20110914_084441-package.tar.bz2
somebody can tell me if is there a module that I can use with this kernel?
thank you
Caio said:
ok thank you,
I tried to load the module using adb, but I think I'm using a wrong file because when I try to load it insmod return me the "invalid module format" output.
I'm using the kernel downloaded here:
http://zimages.googlecode.com/files/htc-msm-linux-20110914_084441-package.tar.bz2
somebody can tell me if is there a module that I can use with this kernel?
thank you
Click to expand...
Click to collapse
Where did you get the module from...? Our kernel is probably not equipped with that module.
Caio,i've sent you a pm,let me know if it works,so i'll maybe push it in the mainline kernel
I downloaded the module on a thread of HTC Diamond's...can someone link me a module that could work with this kernel?
Or is there another way I can use to mount my samba share on my android?
thank you
Caio said:
I downloaded the module on a thread of HTC Diamond's...can someone link me a module that could work with this kernel?
Or is there another way I can use to mount my samba share on my android?
thank you
Click to expand...
Click to collapse
Did you miss helicopter88's PM? He built you a kernel that should have the module built into it...
arrrghhh said:
Did you miss helicopter88's PM? He built you a kernel that should have the module built into it...
Click to expand...
Click to collapse
Failed to boot,pheraps my fault or too much oc..
Later i'll make a stock kernel
Here's the module http://www.mediafire.com/?w6fp94b464cktkc
So you can put it somewhere and insmod it
well, i have the same problem, can anyone solve it?
helicopter88 said:
Here's the module
So you can put it somewhere and insmod it
Click to expand...
Click to collapse
sadly to say that, but the files had been removed
Here's the module..
thanks for your reply, but seems no luck, it just says "invalid module format" when insmod (using the FRX07.1)
ZSaberLv0 said:
thanks for your reply, but seems no luck, it just says "invalid module format" when insmod (using the FRX07.1)
Click to expand...
Click to collapse
Pheraps I should make it from original xdandroid source..
Here's another one
http://www.mediafire.com/file/wsw6tlah3lzp3gs/cifs.ko
helicopter88 said:
Pheraps I should make it from original xdandroid source..
Here's another one
http://www.mediafire.com/file/wsw6tlah3lzp3gs/cifs.ko
Click to expand...
Click to collapse
Didn't you just say it was some simple config flag?
Make use of that "recognized developer" insignia you throw around there and commit something . (Or at least post something to the ML!!)
still doesn't work, shows the same message when insmod or insmod -f
btw, the kernel is modules-2.6.27.46-01356-gd4c73bd.tar.gz, maybe you should build a complete one? (well, i have never played with linux kernel...)
ZSaberLv0 said:
still doesn't work, shows the same message when insmod or insmod -f
btw, the kernel is modules-2.6.27.46-01356-gd4c73bd.tar.gz, maybe you should build a complete one? (well, i have never played with linux kernel...)
Click to expand...
Click to collapse
Assuming his patch is accepted, it will get committed mainline. It's a quite simple change to how the kernel is built.
arrrghhh said:
Assuming his patch is accepted, it will get committed mainline. It's a quite simple change to how the kernel is built.
Click to expand...
Click to collapse
I think phh had an issue with the patch submitted. I have a patch to commit soon so i can look into this. One question i have is how do yall plan to load the module? Does the app insmod it ? or does it expect the module to be built into the kernel?
[ACL] said:
I think phh had an issue with the patch submitted. I have a patch to commit soon so i can look into this. One question i have is how do yall plan to load the module? Does the app insmod it ? or does it expect the module to be built into the kernel?
Click to expand...
Click to collapse
I think people just want the module available in the 'modules`uname-r`.tar.gz' file. That way they at least have the option of insmodding it...(*.user.conf etc) who knows what they want to do with it afterwards - I guess access their phone on a LAN from their PC?
just want to mount my share folder from my PC to Android, so that i can use the shared files online without copy-paste (it'll be quite annoying by copy-paste, especially when you want to edit file, because you must upload it after editing)
in short, same as Caio, just want to use cifsmanager, and it says "no such device"
ZSaberLv0 said:
just want to mount my share folder from my PC to Android, so that i can use the shared files online without copy-paste (it'll be quite annoying by copy-paste, especially when you want to edit file, because you must upload it after editing)
in short, same as Caio, just want to use cifsmanager, and it says "no such device"
Click to expand...
Click to collapse
The fixed patch has been sent to Mailing List,now let's see if it gets approved..
We have experienced so many UI's, like Miui, AOSP, Sense, Touchwiz, etc. but Men always need something new!. Now I bring you the different, the one with nice look, that is Flyme OS. Obviously this is a port of Flyme OS from the Meizu MX (Thanks to Meizu, Cyanogenmod and Lloir), a heavily modified version of Android 4.0.4, the only bugs that i can duplicate is wifi not working! guys can any one help me to fix it?
Base rom: CM9 by Lloir (Thanks Lloir)
Working:
Everything except WIFI
Download link:... http://www.mediafire.com/download/2z270pauld3el01/Flyme_beta.sooraj.zip
Hit like & thanks if you like this!
Happy to try it soon
im looking forward to try this but i really need wifi and i wont be able to help you
but as soon os is up i try it out
iTAZUETA said:
im looking forward to try this but i really need wifi and i wont be able to help you
but as soon os is up i try it out
Click to expand...
Click to collapse
Same here need WiFi
But i really appreciated you the work... I will try it when WiFi is functional
Sent from my One V using xda app-developers app
I'll try when wifi is working (Looks really cool o.o)
I'm surprised. Last time I heard of this, it was full of bugs. Nice work!
Once download it posted, I'll do some testing for WiFi. Recently been having Insomnia, can't sleep. So what else is there to do...
Woww looks cool i also try when wifi works
I love the GUI and I also want to give it a try. But I use wifi all day
WIFI
Im trying out ur OS and trying to get wifi to work and see whats wrong
I might have figured out why ur Wifi Doesnt work
the file giving a hint in ur logcat
Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)
it need this file its just an empty file so try adding that and checking again
sorry cant add into the filesystem cause i dont know how to use adb! just try it out and let me know.
iTAZUETA said:
Im trying out ur OS and trying to get wifi to work and see whats wrong
I might have figured out why ur Wifi Doesnt work
the file giving a hint in ur logcat
Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)
it need this file its just an empty file so try adding that and checking again
sorry cant add into the filesystem cause i dont know how to use adb! just try it out and let me know.
Click to expand...
Click to collapse
open console
"adb remount"
and then
"adb push folder /data/misc/wifi/ipconfig.txt"
folder is which contains ipconfig.txt file )
maybe you don't have time for that but maybe it can help you )
i'm not developer of rom .but i think problem doesn't causes from ipconfig.txt because file inside of data ..so, for solving problem.it must be contain in system .not in data
) i will try asap and i'll feedback
me to use wifi constants day
will try on wifi works
iTAZUETA said:
Im trying out ur OS and trying to get wifi to work and see whats wrong
I might have figured out why ur Wifi Doesnt work
the file giving a hint in ur logcat
Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)
it need this file its just an empty file so try adding that and checking again
sorry cant add into the filesystem cause i dont know how to use adb! just try it out and let me know.
Click to expand...
Click to collapse
That file is in the data partition and os is creating it. still i add it but same..
soorajj said:
That file is in the data partition and os is creating it. still i add it but same..
Click to expand...
Click to collapse
add wpa_client.so in lib folder
add wpa_supplicant.conf in system/etc/wifi
and wpa_cli in system/bin
add wpa_supplicant system/bin
if these files are already ther then take them from cm10 and add them in flyme os once you have copied them in the zip flash it then tell the results flash the latest cm10 hellboy kernel and then logcat when turning on wifi
I know that fixing Wi-Fi is a pain in the *** I am also haing a hard time trying to fix it on cm10.1
the file that you were adding is created by the files these supplicants will config the wifi
Abdullah1997 said:
add wpa_client.so in lib folder
add wpa_supplicant.conf in system/etc/wifi
and wpa_cli in system/bin
add wpa_supplicant system/bin
if these files are already ther then take them from cm10 and add them in flyme os once you have copied them in the zip flash it then tell the results flash the latest cm10 hellboy kernel and then logcat when turning on wifi
I know that fixing Wi-Fi is a pain in the *** I am also haing a hard time trying to fix it on cm10.1
the file that you were adding is created by the files these supplicants will config the wifi
Click to expand...
Click to collapse
Dude his base cm9, cm10 kernel won't even boot. Yes those files should fix it. I'm running cm9 with no probs
So any success there? Dying to try this ROM, but Wi-Fi is needed
@ OP, What device did you port from?
I don't know if it's because I'm CDMA, but I had Phone FC's, Browser FC's, and some other random app from time to time. Also, I couldn't get text messages.
I tried to fix WiFi, but I didn't have time to test and flash back to back. WiFi turned on, off, on, and so on.
Other than that, pretty snappy. Nice Job~
Hi this will work on GSM only not for cdma
Sent from my HTC One using xda app-developers app
I will try to fix over the weekend
Sent from my HTC One using xda app-developers app
soorajj said:
Hi this will work on GSM only not for cdma
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i think Curiousn00b ported it for cdma
he has done it with other roms too
Just to clear the confusion
ivanrvf said:
Dude his base cm9, cm10 kernel won't even boot. Yes those files should fix it. I'm running cm9 with no probs
Click to expand...
Click to collapse
Srry was talking to someone abt cm10 so got mistaken
Wow, this ROM looks great! Will there ever be a port for CDMA? We need something new over there!
Ok guys I've made some tweaks to the Mms.apk,
1) Auto SMS to MMS conversion disabled.
2) Ulimited lines for text typing area.
3) Fixed issues with delivery reports.
4) Minor tweaks.
Next build:
1) MMS fix (First I need confirmation of it's not working from at least two people)
2) Dark them.
3) You say.
Link:
http://www.mediafire.com/download/4h47r4k45ekzeu4/Mms.apk
Instructions:-
Download the Mms.apk file and copy it to your fastboot folder. Open command prompt and enter the following commands:-
Code:
adb remount
adb push Mms.apk /system/app/
adb shell
chmod 644 /system/app/Mms.apk
exit
adb reboot
Make sure to press enter after each command. Also, make a backup of your original Mms.apk in case you experience any problems.
Press thanks to keep me motivated and provide further updates.
Hi,
File deleted?
Invalid or Deleted File.
The key you provided for file access was invalid. This is usually caused because the file is no longer stored on MediaFire. This occurs when the file is removed by the originating user or MediaFire.
Still have questions, or think we've made a mistake? Please contact support for further assistance.
Click to expand...
Click to collapse
unster said:
Hi,
File deleted?
Click to expand...
Click to collapse
Was going to DL this to add to the rom, can you send me a copy of your latest @MScorporation95 ?
unster said:
Hi,
File deleted?
Click to expand...
Click to collapse
mcgi5sr2 said:
Was going to DL this to add to the rom, can you send me a copy of your latest @MScorporation95 ?
Click to expand...
Click to collapse
Sorry for the problem guys. Link fixed.
I need some cool ideas for my next build. Suggestions are appreciated.
MScorporation95 said:
Sorry for the problem guys. Link fixed.
I need some cool ideas for my next build. Suggestions are appreciated.
Click to expand...
Click to collapse
How about helping to build EV3.2 and then CM10.1?
mcgi5sr2 said:
How about helping to build EV3.2 and then CM10.1?
Click to expand...
Click to collapse
Yeah sure.. When we're starting?
MScorporation95 said:
Yeah sure.. When we're starting?
Click to expand...
Click to collapse
I'm uploading the the latest CM10 with your mms.apk in it now. I will clean my github and then sync in the device/vendor/msm7x30 trees that I have so far for them. The latest build I have done have two main issues, firstly the kernel isn't building properly, it comes out around 4kbs too small, and won't boot very far. Using a downloaded version of hellboy the rom boots past the htc screen onto a black, with the latest version we should be able to pull a logcat to see more closely what we need to fix.
Once I have it all uploaded I'll start a new thread and add any and all stuff I know so far, so that anyone can pitch in if they feel like it. I think we should make it a rookie friendly as possible so that anyone here can contribute.
mcgi5sr2 said:
I'm uploading the the latest CM10 with your mms.apk in it now. I will clean my github and then sync in the device/vendor/msm7x30 trees that I have so far for them. The latest build I have done have two main issues, firstly the kernel isn't building properly, it comes out around 4kbs too small, and won't boot very far. Using a downloaded version of hellboy the rom boots past the htc screen onto a black, with the latest version we should be able to pull a logcat to see more closely what we need to fix.
Once I have it all uploaded I'll start a new thread and add any and all stuff I know so far, so that anyone can pitch in if they feel like it. I think we should make it a rookie friendly as possible so that anyone here can contribute.
Click to expand...
Click to collapse
Alright, I'm ready when you are. PM me.
***OFFICIAL THREAD FOR THIS ISSUE FOR THE OPTIMUS G PRO E980***
I have the necessary APKs and other files to make a flashable zip, however whenever I try to flash it it succeeds but when I click on quickremote, the app force closes on me and will not load. How can we successfully get this to work on lollipop? I have posted several times in the forums but nobody seems to care about helping get this done.
Here is a the link to my pasted logcat relating to this error. I uploaded it to pastebin.
http://pastebin.com/1GhY8b3T
rjmxtech said:
I have the necessary APKs and other files to make a flashable zip, however whenever I try to flash it it succeeds but when I click on quickremote, the app force closes on me and will not load. How can we successfully get this to work on lollipop? I have posted several times in the forums but nobody seems to care about helping get this done.
Click to expand...
Click to collapse
Take a logcat and see what's in there (use google, to search how to do that. )
Sunandroid said:
Take a logcat and see what's in there (use google, to search how to do that. )
Click to expand...
Click to collapse
I sent you a PM
wow, this is proving to be just as uneventful as it sounds.... dude, if you're going to ask for or write a guide, make its own thread.
berryman13 said:
wow, this is proving to be just as uneventful as it sounds.... dude, if you're going to ask for or write a guide, make its own thread.
Click to expand...
Click to collapse
I replied to one of your posts on another thread. @Snepsts and I are attempting to figure this out at the moment through PM's and such. I will make a thread for it if we get anywhere with it.
I pasted a logcat on pastebin and put the link in the OP
Are you sure, you got all files? Odex file? Another part of the apk? Set the right permissions? Do you use a custom screen density?
Sunandroid said:
Are you sure, you got all files? Odex file? Another part of the apk? Set the right permissions? Do you use a custom screen density?
Click to expand...
Click to collapse
Check your inbox BTW. I just sent you a message.
Code:
03-02 12:34:40.312 E/AndroidRuntime(4334): java.lang.NoClassDefFoundError: Failed resolution
by: java.lang.ClassNotFoundException: Didn't find class "com.lge.systemservice.core.LGContext" on path: DexPathList[[zip file "/system/app/LGQRemote.apk"],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
First is why I asked about density. Try it out with stock density of the G3
2nd: Those are the patha I'd go diggin. Maybe gonna explain a bit closer/have a closer look tomorrow. Got to sleep now.^^
Amything new here? Have you already searched in the fokders I "mentioned"?
I'm back and trying to get this working once more. It is so odd that the way they got this working on the G2 and G3 does not work on ours. It makes me think that the stock LG ROM with lollipop for the G Pro is just a bunch of hacks LG threw into a zip file which just makes this even more difficult. I'm not going to give up yet though. If anyone else has any suggestions please PM me. I would gladly appreciate more ideas.
---
rjmxtech said:
---
Click to expand...
Click to collapse
As already asked, what was the results of digging in the directories I mentioned. And better don't take this to PMs...
Sunandroid said:
As already asked, what was the results of digging in the directories I mentioned. And better don't take this to PMs...
Click to expand...
Click to collapse
I'm pretty sure I tried it and it didn't work but I will give it another go
@Sunandroid, how can I get the odex files without installing the ROM myself. Is there a way to accomplish this?
rjmxtech said:
@Sunandroid, how can I get the odex files without installing the ROM myself. Is there a way to accomplish this?
Click to expand...
Click to collapse
Not sure, but it should be doable by unpacking the roms zip.
Sunandroid said:
Not sure, but it should be doable by unpacking the roms zip.
Click to expand...
Click to collapse
I am pretty sure the odex files are generated when the ROM is installed. This means I need to have someone who has the ROM working to get them to me.. The zip only has the files from the system partition.
rjmxtech said:
I am pretty sure the odex files are generated when the ROM is installed. This means I need to have someone who has the ROM working to get them to me.. The zip only has the files from the system partition.
Click to expand...
Click to collapse
Yeah, and the odes files usually are in system partition. Post a link to the ROM, you want to ectract the remote from, please. Gonna dig in there next weekend if O got the time.
Sunandroid said:
Yeah, and the odes files usually are in system partition. Post a link to the ROM, you want to ectract the remote from, please. Gonna dig in there next weekend if O got the time.
Click to expand...
Click to collapse
Here is the link to the ROM's thread. http://forum.xda-developers.com/showthread.php?t=3043779
Just bumping this up. I have had no luck with it at all. Need help from others.
SplashInjectorsplash injector is a tool created by me based on the work done by @makers_mark . it is a basic command line interface but it gets the job done. it supports all oneplus devices so far except the oneplus x :crying: i can add support once someone gets me the logo.bin file from that device. The tool is pretty simple its based on the work here https://forum.xda-developers.com/oneplus-3/themes/mod-splash-screen-image-injector-t3441999 this is where i got this all from. i know it can be kinda hacky and only supports unix systems i think you can get it working by using git bash on windows. In its current state it can decode and encode all oneplus logo.bins (Including the OnePlus 5!) it can also pack flashable zips for you automatically. all you need to do is run the decode option edit the file you want in the output folder. Then you can run the encode command and it will pack it all back up. Then package it with the package command. Once again major credit to @makers_mark he did all the leg work. i just made it a little more friendly. lmk if there is any issues you find
Telegram: @ethanbanker if you need anything contact me here.
Now lets get to it
follow the instructions here located here
https://github.com/ethanbanker2428/SplashInjector
Updates:
1.52: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector
WARNING I AM NOT RESPONSIBLE FOR ANYTHING YOU DO. DO THIS AT YOUR OWN RISK
Excellent...... working great for OP5
Thanks
biohaz55 said:
Excellent...... working great for OP5
Thanks
Click to expand...
Click to collapse
Hi, I can't get it working on Windows. If I send you a PNG will you make me a zip?
Thanks! Here is the Windows binary and src for logoinjectorv1.52.
makers_mark said:
Thanks! Here is the Windows binary and src for logoinjectorv1.52.
Click to expand...
Click to collapse
thanks im gonna rebuild with the newest version and probably work on a windows version tonight :good:
Can you make a captain America one?
can u please make flashable zip i cannot get the method to flash . can u guide me please @bobglaus
freakzapster said:
can u please make flashable zip i cannot get the method to flash . can u guide me please @bobglaus
Click to expand...
Click to collapse
did u use option 3? package? that should make one after you edit the files
bobglaus said:
did u use option 3? package? that should make one after you edit the files
Click to expand...
Click to collapse
actually i dont know to edit files i am new to this thats why i am not understanding
freakzapster said:
actually i dont know to edit files i am new to this thats why i am not understanding
Click to expand...
Click to collapse
click the help option. i feel it explains it pretty well. to edit the png in the output folder use gimp or photoshop
Ok just an update windows support is finished and in the tool now. I'll push probably tomorrow it works and packs and unpacks fine just getting issues with packaging the zips. It corrupts them. Im gonna switch to 7zip and see if that works then I'll push
bobglaus said:
Ok just an update windows support is finished and in the tool now. I'll push probably tomorrow it works and packs and unpacks fine just getting issues with packaging the zips. It corrupts them. Im gonna switch to 7zip and see if that works then I'll push
Click to expand...
Click to collapse
Other option is to move the files to the output folder and ask the user to manually zip them, it's available on windows right click menu.
---------
I have a question, what's the BGR option for? I thought it was for op5 display but it only change the color of the pngs, so I switched it for RGB and now my logo looks good.
I share my mod, original was taken from CUSTOM BOOT LOGO PACK FOR OnePlus3.
badtzo said:
Other option is to move the files to the output folder and ask the user to manually zip them, it's available on windows right click menu.
---------
I have a question, what's the BGR option for? I thought it was for op5 display but it only change the color of the pngs, so I switched it for RGB and now my logo looks good.
I share my mod, original was taken from CUSTOM BOOT LOGO PACK FOR OnePlus3.
Click to expand...
Click to collapse
bgr does **** up the colors a bit or fixes it. its one of those things where you use it if you need it and you will know if you need it.
also update to anyone else that update will have to wait. im a perfectionist and im revamping the whole thing to alot cleaner code. windows should work tho and the oneplus x will be supported hopefully too
Update: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector
bobglaus said:
Update: Ok guys im not a windows expert...i barely use it so the tool does support windows now but it cant package files. it does give you all the tools and files you need to package one tho. you can use a tool such as this https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772 this update also includes a completely revamped system. lmk about any bugs you find. for windows you need to install and use GIT bash. i also added a update function to easily update the tool. its simple but it works. heres my git again for you guys https://github.com/ethanbanker2428/SplashInjector
Click to expand...
Click to collapse
Hi, I created the zip but it won't flash in twrp. Is there a compression method to use? Using 7zip.
Bigs1985 said:
Hi, I created the zip but it won't flash in twrp. Is there a compression method to use? Using 7zip.
Click to expand...
Click to collapse
use the tool i linked in the post you qouted
bobglaus said:
use the tool i linked in the post you qouted
Click to expand...
Click to collapse
I thought it didn't package the zips correctly? Is that fixed?
Bigs1985 said:
I thought it didn't package the zips correctly? Is that fixed?
Click to expand...
Click to collapse
No this one https://forum.xda-developers.com/android/software-hacking/tool-6-feb-android-flashable-zip-t3551772
how can i pull LOGO.bin from my oneplus 5?
when i run:
adb shell dd if=/dev/block/sde17 of=/sdcard/partition/LOGO.bin
Click to expand...
Click to collapse
i get this error message:
dd: /dev/block/sde17: Permission denied
Click to expand...
Click to collapse
Please help
Thanks
spicemaster said:
how can i pull LOGO.bin from my oneplus 5?
when i run:
i get this error message:
Please help
Thanks
Click to expand...
Click to collapse
Of course you need root，The right command is
adb shell su -c dd if xxxx