Mms.apk (Modded) - HTC One V

Ok guys I've made some tweaks to the Mms.apk,
1) Auto SMS to MMS conversion disabled.
2) Ulimited lines for text typing area.
3) Fixed issues with delivery reports.
4) Minor tweaks.
Next build:
1) MMS fix (First I need confirmation of it's not working from at least two people)
2) Dark them.
3) You say.
Link:
http://www.mediafire.com/download/4h47r4k45ekzeu4/Mms.apk
Instructions:-
Download the Mms.apk file and copy it to your fastboot folder. Open command prompt and enter the following commands:-
Code:
adb remount
adb push Mms.apk /system/app/
adb shell
chmod 644 /system/app/Mms.apk
exit
adb reboot
Make sure to press enter after each command. Also, make a backup of your original Mms.apk in case you experience any problems.
Press thanks to keep me motivated and provide further updates.

Hi,
File deleted?
Invalid or Deleted File.
The key you provided for file access was invalid. This is usually caused because the file is no longer stored on MediaFire. This occurs when the file is removed by the originating user or MediaFire.
Still have questions, or think we've made a mistake? Please contact support for further assistance.
Click to expand...
Click to collapse

unster said:
Hi,
File deleted?
Click to expand...
Click to collapse
Was going to DL this to add to the rom, can you send me a copy of your latest @MScorporation95 ?

unster said:
Hi,
File deleted?
Click to expand...
Click to collapse
mcgi5sr2 said:
Was going to DL this to add to the rom, can you send me a copy of your latest @MScorporation95 ?
Click to expand...
Click to collapse
Sorry for the problem guys. Link fixed.
I need some cool ideas for my next build. Suggestions are appreciated.

MScorporation95 said:
Sorry for the problem guys. Link fixed.
I need some cool ideas for my next build. Suggestions are appreciated.
Click to expand...
Click to collapse
How about helping to build EV3.2 and then CM10.1?

mcgi5sr2 said:
How about helping to build EV3.2 and then CM10.1?
Click to expand...
Click to collapse
Yeah sure.. When we're starting?

MScorporation95 said:
Yeah sure.. When we're starting?
Click to expand...
Click to collapse
I'm uploading the the latest CM10 with your mms.apk in it now. I will clean my github and then sync in the device/vendor/msm7x30 trees that I have so far for them. The latest build I have done have two main issues, firstly the kernel isn't building properly, it comes out around 4kbs too small, and won't boot very far. Using a downloaded version of hellboy the rom boots past the htc screen onto a black, with the latest version we should be able to pull a logcat to see more closely what we need to fix.
Once I have it all uploaded I'll start a new thread and add any and all stuff I know so far, so that anyone can pitch in if they feel like it. I think we should make it a rookie friendly as possible so that anyone here can contribute.

mcgi5sr2 said:
I'm uploading the the latest CM10 with your mms.apk in it now. I will clean my github and then sync in the device/vendor/msm7x30 trees that I have so far for them. The latest build I have done have two main issues, firstly the kernel isn't building properly, it comes out around 4kbs too small, and won't boot very far. Using a downloaded version of hellboy the rom boots past the htc screen onto a black, with the latest version we should be able to pull a logcat to see more closely what we need to fix.
Once I have it all uploaded I'll start a new thread and add any and all stuff I know so far, so that anyone can pitch in if they feel like it. I think we should make it a rookie friendly as possible so that anyone here can contribute.
Click to expand...
Click to collapse
Alright, I'm ready when you are. PM me.

Related

[CM9]Camera Developement How-to, Q&A

Hi guys, I've opened this thread so we can talk about the camera developement for CM9.
Here is the link including files and a how-to.
Here is the second link if you want even clearler instructions (Thanks to texten)
andy did u try it?( camera work)
Sent from my GT-I8150 using xda premium
Nothing, isn't working for me...
EDIT: I've an alpha 3, flashed the zip, and checked the permissions... Waiting for Arco...
I think we are missing with something..hopefully our Mentor. arco68 have the time to pass thru ere..
Can somebody poke alisd too...NVM I think I just did
http://forum.xda-developers.com/showthread.php?p=26384027
Sent from my GT-I8150 using Tapatalk 2
We can wait xD
iSadic said:
Nothing, isn't working for me...
Click to expand...
Click to collapse
+1
I tried very quickly 'cuz I don't have much time, but oisis' update zip+alpha2 didn't work.
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
texten said:
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
Click to expand...
Click to collapse
tried the instructions, but not working...
mike_kenji said:
tried the instructions, but not working...
Click to expand...
Click to collapse
maybe you will need to replace the "firmware"folder in that zip with firmware folder of gingerbread for you device
also the same procedure for the "media_profile.xml" in etc...
this could work:
just take that zip in my post, replace firmware folder and the media_profile.xml with the ones of your latest gingerbread...
and follow the installation instructions in my post
texten said:
this link is better:
http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
have fun!
Click to expand...
Click to collapse
texten said:
maybe you will need to replace the "firmware"folder in that zip with firmware folder of gingerbread for you device
Click to expand...
Click to collapse
where can i find those files? is the camera working for you?
mike_kenji said:
where can i find those files? is the camera working for you?
Click to expand...
Click to collapse
look here http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
you can see whats working and whats not working...
you can use the camera_experimental-0.1.zip
but you need to replace the firmware folder and the media_profile.xml in that zip with the ones of the latest gingerbread for your device
and do not forget to follow the installation instructions
for your further development on camera, you can also use these "instructions for camera testers"
(maybe you will add these to post#1 of this topic here)
--------------------------
here are instructions for camera testers:
Few important things:
1. make notes, because we will need it to restore steps.
2. make a logcat:
Code:
adb logcat -d > logcat.txt
if you want, edit logs like that (less logs - easier to read, logs only related with camera):
Linux shell:
Code:
cat ./logcat.txt | grep camera > logcat.new.txt
Windows cmd:
Code:
type logcat.txt | findstr camera > nwelogcat.txt
3. If you will find in log that HAL cannot connect with camera do not post logs, because they are useless
4. Do not zip or rar logs = easier to read on phone
----------------------------------
Additional Links:
You can try files from these phones.
Phones with MSM8255:
- CDMA XPeria Play
- LG Revolution
- HTC Desire S
- Sony xperia mini,mini pro, neo etc - camera works
- My touch 4g - camera works
- Xperia play - camera works
- Htc desire s - camera works
- Huawei honor - official ICS
- Htc one V - no front camera but official ICS
- http://forum.xda-developers.com/showthread.php?t=1639634
Thanks to: Spider550 for links, he cannot post here yet.
----------------------------------------------------------------------
if you make a logcat, do not forget to post which files you used.
folders for all files:
do not forget to set permissions for changed files/folders like all other files/folders there... and reboot after all changes you made!
*.so files to /system/lib
media_profile.xml to /system/etc
camera.apk to /system/app
firmware files to /system/firmware (maybe you have to create a folder)
---------
now you can start with testing.
for logcat = shutdown device - boot - start camtests - after that make a logcat directly.
texten said:
look here http://forum.xda-developers.com/showpost.php?p=26511647&postcount=428
you can see whats working and whats not working...
you can use the camera_experimental-0.1.zip
but you need to replace the firmware folder and the media_profile.xml in that zip with the ones of the latest gingerbread for your device
Click to expand...
Click to collapse
i'll try this in a while... thanks a lot... sorry for being a noob...
mike_kenji said:
i'll try this in a while... thanks a lot... sorry for being a noob...
Click to expand...
Click to collapse
no problem, maybe one other user of your device will give it a try
texten said:
no problem, maybe one other user of your device will give it a try
Click to expand...
Click to collapse
uhm... one last question, where do i put the firmware files? hehehe
*EDIT
nevermind, found it... thanks again!
mike_kenji said:
uhm... one last question, where do i put the firmware files? hehehe
Click to expand...
Click to collapse
open the zip file, delete the folder "firmware" and push your firmware folder from the latest gingerbread of your device on that place...
the same do with media_profile.xml
texten said:
open the zip file, delete the folder "firmware" and push your firmware folder from the latest gingerbread of your device on that place...
the same do with media_profile.xml
Click to expand...
Click to collapse
thanks.... wish me luck
mike_kenji said:
thanks.... wish me luck
Click to expand...
Click to collapse
good luck.
hahaha, i'm stuck on a bootloop.... try again...

[DEV][ROM][JB 4.2.2][Unofficial] CM10.1.3

Since Spyke555 is busy, I updated cm10.1 with his last device tree.
You can download from http://dualhoki.vim.hu/bubor/dev/10.1/cm-10.1-20131024-UNOFFICIAL-i927.zip
Please read http://forum.xda-developers.com/showthread.php?t=2217288
It has same issues. Cm has security bugfix, and I want to keep cm up to date.
- Gps was fixed.
20131025: update to cm 10.1.3, increaes dalvik.vm.heapsize, android_packages_app_settings at b1755aad3d3ad2ac0e72297a6b4b60031d15ff69
20150826: cm security update
issue
same as other cm 10.1
settings -> about crash
ghost call: please try litekernel
Updated kernel here: http://dualhoki.vim.hu/bubor/dev/11.0/tegra-reserved-192mb-kernel-only-oldone.zip with lowered tegra reserved memory ( more usable memory)
Litekernel found here
Androide3 said:
Home long press not work
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
settings -> system -> hardware keys -> enable custom actions (check) and home key (long press) set to Recent app switcher
And you may set app switch key to voice search, so mic key will work as voice search.
Didn't have time to test everything but gave it a quick spin but noticed something right away... Couldn't download from playstore. Gave some error about couldn't find information.
Had to go back to spykes last version which is dd, will try to play more later. for reference I don't have any playstore issue after restore.
Neuntoter said:
Didn't have time to test everything but gave it a quick spin but noticed something right away... Couldn't download from playstore. Gave some error about couldn't find information.
Had to go back to spykes last version which is dd, will try to play more later. for reference I don't have any playstore issue after restore.
Click to expand...
Click to collapse
Was that clean install?
I can install app from play store.
bubor said:
Was that clean install?
I can install app from play store.
Click to expand...
Click to collapse
The only thing I didn't wipe was the sdcard.
I will give it a better shake later today. Were you using tonyg-nonneon gaps?
Neuntoter said:
The only thing I didn't wipe was the sdcard.
I will give it a better shake later today. Were you using tonyg-nonneon gaps?
Click to expand...
Click to collapse
yes
bubor said:
Since Spyke555 is busy, I updated cm10.1 with his last device tree.
You can download from http://dualhoki.vim.hu/bubor/cm-10.1-20130725-UNOFFICIAL-i927.zip
Please read http://forum.xda-developers.com/showthread.php?t=2217288
Click to expand...
Click to collapse
kudos bubor !
Unfortunately it seems the same issues that Kick is having with calls is present here as well so it's definitely seems to be something from CM. I haven't had anyone try to call me but I made a test call and was unable to end the call.
m1batt1 said:
Unfortunately it seems the same issues that Kick is having with calls is present here as well so it's definitely seems to be something from CM. I haven't had anyone try to call me but I made a test call and was unable to end the call.
Click to expand...
Click to collapse
please try this:
http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
ITs use opensource libril. Please feedback ASAP
bubor said:
please try this:
http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
ITs use opensource libril. Please feedback ASAP
Click to expand...
Click to collapse
I just got to work and won't be able to test until later tonight but I'll check it out and let you know.
Sent from my SGH-I927 using xda app-developers app
bubor said:
please try this:
http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
ITs use opensource libril. Please feedback ASAP
Click to expand...
Click to collapse
i tried it and calls work normally, i can end a call and i can recieve calls with no problem!
bubor said:
please try this:
http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
ITs use opensource libril. Please feedback ASAP
Click to expand...
Click to collapse
Hey! I'm at work currently but got chance to test it so here it goes what I found.
Calls: ok. I did 2 calls, receive 2 calls, did 1 outgoing call and put speaker, and receive 1 call and also test with speaker. So far all calls had audio.
Skype, and this is interesting. I tested from the glide to my work skype account, and in the glide the audio is still broken:
- Calling from glide to pc: I could hear myself ok ON the PC (so lets say the other side could hear me), but not FROM the pc, I heard it was all all deep and slow (nothing new to me there). I could even turn on the video call and it worked.
- Calling from pc to glide, skype in the glide just dies and restarts.
I'm sorry I cannot test more, I'm at work. I was using CM 10.1 RC2 from spyke555 and dirty flashed this one (just cleared cache and dalvik).
Bubor, if you can think a protocol for testing specific things (for example 1-test X and note results, 2-test Y and note resulted, after all tests report back to forum with results) somehting like that that would be equal among all that we are testing and might give you insight of the problems or if you need to test just 1 particulare thing, well, for that thing.
Keep it up people, let's give the devs what they need, tests, reports, results, they give us their time doing this, we must at least do the same!
Bubor, its CM10.1.2 o 10.1
Sent from my SGH-I927 using xda app-developers app
ugoPS said:
Bubor, its CM10.1.2 o 10.1
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
10.1.2, you can check in about phone -> "view changelog"
Skype doesnt work. This build should be same as before, same bugs.
Okay. Did full wipe of sdcard and all, now no issues with play store.
Now I have never had voice search work with hot word detection, and that is still the case. Am I just lame or is this the way it should be. I had heard people talk about it working before.
Calls work. Both directions 4 times each tested. can hang up etc.
Unless there is something else supposedly fixed I guess it works for me.
How did you include the kernel? Just put the zip in the kernel/samsung/i927 folder?
Also are you still using the proprietary vendor files from The Covenant?
I know libril is a library for radio access but can you help me understand which one we need and how to include it in the build?
Thanks for any help you can provide still working on my first build after hours of downloading cm repo.
Neuntoter said:
How did you include the kernel? Just put the zip in the kernel/samsung/i927 folder?
Also are you still using the proprietary vendor files from The Covenant?
I know libril is a library for radio access but can you help me understand which one we need and how to include it in the build?
Thanks for any help you can provide still working on my first build after hours of downloading cm repo.
Click to expand...
Click to collapse
this device tree including kernel binary and modules. It would fail to build, if you include kernel source with this device tree.
Both device and vendor files you can found http://dualhoki.vim.hu/bubor/dev/cm-10.1-20130726-UNOFFICIAL-i927.tgz
You need one more thing that is https://github.com/CyanogenMod/android_hardware_samsung (just change _ to / for correct path)
bubor said:
this device tree including kernel binary and modules. It would fail to build, if you include kernel source with this device tree.
Both device and vendor files you can found http://dualhoki.vim.hu/bubor/dev/cm-10.1-20130726-UNOFFICIAL-i927.tgz
You need one more thing that is https://github.com/CyanogenMod/android_hardware_samsung (just change _ to / for correct path)
Click to expand...
Click to collapse
When you say kernel binary you mean the zip I download from kickass right? Are you saying I just put that in the kernel/samsung/i927 folder and it will automatically be included?
Just to clarify.
Get rid of device tree I got from spyke555's GIT and use the ones from your tgz. Now I assume I still put them in device/samsung/i927 and vendor/samsung/i927 right?
for the https://github.com/CyanogenMod/android_hardware_samsung
Do I just git clone that into the root? Or where should I be putting this?
Sorry for all the questions but I want to make sure I learn this and am a help later on.
Neuntoter said:
When you say kernel binary you mean the zip I download from kickass right? Are you saying I just put that in the kernel/samsung/i927 folder and it will automatically be included?
Just to clarify.
Get rid of device tree I got from spyke555's GIT and use the ones from your tgz. Now I assume I still put them in device/samsung/i927 and vendor/samsung/i927 right?
for the https://github.com/CyanogenMod/android_hardware_samsung
Do I just git clone that into the root? Or where should I be putting this?
Sorry for all the questions but I want to make sure I learn this and am a help later on.
Click to expand...
Click to collapse
Depend what is in your boardconfig.mk, if it has prebuild things, you would not put kernel source, but put kernel binary.
TARGET_PREBUILT_KERNEL := device/samsung/i927/prebuilt/kernel
TARGET_PREBUILT_RECOVERY := device/samsung/i927/prebuilt/recovery.img
If you use kernel source, it would be:
TARGET_KERNEL_SOURCE := kernel/samsung/i927
TARGET_KERNEL_CONFIG := tegra_bose_defconfig
Where keren source path, and the other is the defconfig what is in kernel/samsung/i927/arch/arm/configs
When you change _ to / in android_hardware_samsung you get android/hardware/samsung where android is the dir where you start, so you put to hardware/samsung. With command
git clone https://github.com/CyanogenMod/android_hardware_samsung hardware/samsung
Click to expand...
Click to collapse
Or you can put to the manifest, so repo sync will update to you.
If you wish, I could put whole directory to somewhere, but it would be something like 30giga.
Thank you Bubor! Couldn't of done it without you!
It appears to be building. I guess I won't know for sure until it is done.
bubor said:
Since Spyke555 is busy, I updated cm10.1 with his last device tree.
You can download from http://dualhoki.vim.hu/bubor/cm-10.1-20130726-UNOFFICIAL-i927.zip
Please read http://forum.xda-developers.com/showthread.php?t=2217288
It has same issues. Cm has security bugfix, and I want to keep cm up to date.
Last month I tried to fix tinyalsa, what fix most sound issue ( except bt calls). I'll keep trying.
Click to expand...
Click to collapse
Bubor, local forum users say that GPS is finally fixed in your build. I can confirm that, now GPS status and toolbox shows much more sattelites than previous CM versions. Thanx for that!

[OFFICIAL THREAD] Getting the LG QRemote from 5.0 Korean update working on AOSP 5.x

***OFFICIAL THREAD FOR THIS ISSUE FOR THE OPTIMUS G PRO E980***
I have the necessary APKs and other files to make a flashable zip, however whenever I try to flash it it succeeds but when I click on quickremote, the app force closes on me and will not load. How can we successfully get this to work on lollipop? I have posted several times in the forums but nobody seems to care about helping get this done.
Here is a the link to my pasted logcat relating to this error. I uploaded it to pastebin.
http://pastebin.com/1GhY8b3T
rjmxtech said:
I have the necessary APKs and other files to make a flashable zip, however whenever I try to flash it it succeeds but when I click on quickremote, the app force closes on me and will not load. How can we successfully get this to work on lollipop? I have posted several times in the forums but nobody seems to care about helping get this done.
Click to expand...
Click to collapse
Take a logcat and see what's in there (use google, to search how to do that. )
Sunandroid said:
Take a logcat and see what's in there (use google, to search how to do that. )
Click to expand...
Click to collapse
I sent you a PM
wow, this is proving to be just as uneventful as it sounds.... dude, if you're going to ask for or write a guide, make its own thread.
berryman13 said:
wow, this is proving to be just as uneventful as it sounds.... dude, if you're going to ask for or write a guide, make its own thread.
Click to expand...
Click to collapse
I replied to one of your posts on another thread. @Snepsts and I are attempting to figure this out at the moment through PM's and such. I will make a thread for it if we get anywhere with it.
I pasted a logcat on pastebin and put the link in the OP
Are you sure, you got all files? Odex file? Another part of the apk? Set the right permissions? Do you use a custom screen density?
Sunandroid said:
Are you sure, you got all files? Odex file? Another part of the apk? Set the right permissions? Do you use a custom screen density?
Click to expand...
Click to collapse
Check your inbox BTW. I just sent you a message.
Code:
03-02 12:34:40.312 E/AndroidRuntime(4334): java.lang.NoClassDefFoundError: Failed resolution
by: java.lang.ClassNotFoundException: Didn't find class "com.lge.systemservice.core.LGContext" on path: DexPathList[[zip file "/system/app/LGQRemote.apk"],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
First is why I asked about density. Try it out with stock density of the G3
2nd: Those are the patha I'd go diggin. Maybe gonna explain a bit closer/have a closer look tomorrow. Got to sleep now.^^
Amything new here? Have you already searched in the fokders I "mentioned"?
I'm back and trying to get this working once more. It is so odd that the way they got this working on the G2 and G3 does not work on ours. It makes me think that the stock LG ROM with lollipop for the G Pro is just a bunch of hacks LG threw into a zip file which just makes this even more difficult. I'm not going to give up yet though. If anyone else has any suggestions please PM me. I would gladly appreciate more ideas.
---
rjmxtech said:
---
Click to expand...
Click to collapse
As already asked, what was the results of digging in the directories I mentioned. And better don't take this to PMs...
Sunandroid said:
As already asked, what was the results of digging in the directories I mentioned. And better don't take this to PMs...
Click to expand...
Click to collapse
I'm pretty sure I tried it and it didn't work but I will give it another go
@Sunandroid, how can I get the odex files without installing the ROM myself. Is there a way to accomplish this?
rjmxtech said:
@Sunandroid, how can I get the odex files without installing the ROM myself. Is there a way to accomplish this?
Click to expand...
Click to collapse
Not sure, but it should be doable by unpacking the roms zip.
Sunandroid said:
Not sure, but it should be doable by unpacking the roms zip.
Click to expand...
Click to collapse
I am pretty sure the odex files are generated when the ROM is installed. This means I need to have someone who has the ROM working to get them to me.. The zip only has the files from the system partition.
rjmxtech said:
I am pretty sure the odex files are generated when the ROM is installed. This means I need to have someone who has the ROM working to get them to me.. The zip only has the files from the system partition.
Click to expand...
Click to collapse
Yeah, and the odes files usually are in system partition. Post a link to the ROM, you want to ectract the remote from, please. Gonna dig in there next weekend if O got the time.
Sunandroid said:
Yeah, and the odes files usually are in system partition. Post a link to the ROM, you want to ectract the remote from, please. Gonna dig in there next weekend if O got the time.
Click to expand...
Click to collapse
Here is the link to the ROM's thread. http://forum.xda-developers.com/showthread.php?t=3043779
Just bumping this up. I have had no luck with it at all. Need help from others.

[RECOVERY] TWRP 3.1.1-0 Unofficial

I got bored, so I decided to build the latest TWRP. Big thanks to @negamann303 for his source. I only made minor, mostly theme related, tweaks to it. The only non-theme related tweak that I can remember is that I enabled the flag that enables taking advantage of NEON, so that might result in some speed increases, but I haven't done any tests to confirm that.
Q: Sweet! Does ADB backup work?
A: No. Sorry. If you know how to make it work, please let me know and I will implement it.
Q: Oh. So this is basically the same as the previous version?
A: Pretty much. I imagine it supports a whole bunch of new things that our watch isn't capable of, but who cares. It also features the nag screen that asks if you want to install the official TWRP app, which is useless in this case. You can tell it to stop though.
Q:So why should I bother with this?
A: Because you're a flashaholic that needs to have the latest and greatest thing. Duh.
SOURCE
Device: https://github.com/theSt33v/omni_twrp_device
Kernel: https://github.com/Negamann303/Huawei-W-1.5-2.0
TWRP: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Does this work with the android 2.0 on the Huewai? Also, is there an img file to flash in fastboot? Thanks.
jnewberry1 said:
Does this work with the android 2.0 on the Huewai? Also, is there an img file to flash in fastboot? Thanks.
Click to expand...
Click to collapse
It does, and - have you tried downloading the ZIP and checking what's hiding inside?
munky-head said:
It does, and - have you tried downloading the ZIP and checking what's hiding inside?
Click to expand...
Click to collapse
LOL. My bad. I just assumed it was a flashable zip. Thank you.
1st of all: Thank you soo much!!!!
How could I theme this?
(also you only build it with a local manifest or do you also have a git, which I could fork for theme testing?)
BIade said:
1st of all: Thank you soo much!!!!
How could I theme this?
(also you only build it with a local manifest or do you also have a git, which I could fork for theme testing?)
Click to expand...
Click to collapse
Sources are posted in the OP. Help yourself. I don't know much about TWRP theming, but I do know that the files you want to modify are found in device/huawei/sturgeon/watch_mdpi. This is the folder that was modified by @negamann303, and by myself to a lesser extent, to get the theme that you see in the version that I built. There is also a watch_mdpi folder in the TWRP source somewhere that contains the default watch theme. TWRP is also capable of themes that can be applied post-build so you don't have to build a new one every time you want it to look different, but I don't know anything about how to make that happen. Search XDA for flashable TWRP themes for examples, but make sure they're for 3.1.0. The theme template has changed a bit from previous versions. Hope that helps!
TheSt33v said:
Sources are posted in the OP. Help yourself. I don't know much about TWRP theming, but I do know that the files you want to modify are found in device/huawei/sturgeon/watch_mdpi. This is the folder that was modified by @negamann303, and by myself to a lesser extent, to get the theme that you see in the version that I built. There is also a watch_mdpi folder in the TWRP source somewhere that contains the default watch theme. TWRP is also capable of themes that can be applied post-build so you don't have to build a new one every time you want it to look different, but I don't know anything about how to make that happen. Search XDA for flashable TWRP themes for examples, but make sure they're for 3.1.0. The theme template has changed a bit from previous versions. Hope that helps!
Click to expand...
Click to collapse
Worked, thank you very much
Thank you, im really happy now
Cheers
Blade
P.S.: @TheSt33v I changed
Code:
%col1_x_left%
to 50 for some titles, due to the round sceen cutting some header texts in statusbar. (see last screenshot)
BIade said:
Thank you, im really happy now
Cheers
Blade
P.S.: @TheSt33v I changed
Code:
%col1_x_left%
to 50 for some titles, due to the round sceen cutting some header texts in statusbar. (see last screenshot)
Click to expand...
Click to collapse
Sexy. Maybe I'll look into making that an applyable theme for everyone if I find some time. Can you post your watch_mdpi folder?
Looks like 3.1.1 came out today. I'll have to get on that too.
TheSt33v said:
Sexy. Maybe I'll look into making that an applyable theme for everyone if I find some time. Can you post your watch_mdpi folder?
Click to expand...
Click to collapse
I already did ^^
BIade said:
I already did ^^
Click to expand...
Click to collapse
You explained what you did, but I don't see the actual folder uploaded anywhere. It would save me some time if I didn't have to reproduce what you did.
TheSt33v said:
You explained what you did, but I don't see the actual folder uploaded anywhere. It would save me some time if I didn't have to reproduce what you did.
Click to expand...
Click to collapse
Sorry, I meant, I already created a flashable theme-zip. I will share it tonight, when I arrive at home...
BIade said:
Sorry, I meant, I already created a flashable theme-zip. I will share it tonight, when I arrive at home...
Click to expand...
Click to collapse
I hate to nag you, but could you post that theme when you get a chance? I'd like to see it in person.
@TheSt33v Sorry mate, for the late response. As promised here my theme (Just a WIP, I used a template for the filestructure etc.)
This saves me time from having to do it myself, I can look into removing the nag screen if you haven't figured it out yet
Sent from my SM-G935P using Tapatalk
negamann303 said:
This saves me time from having to do it myself, I can look into removing the nag screen if you haven't figured it out yet
Sent from my SM-G935P using Tapatalk
Click to expand...
Click to collapse
I forgot it was even there, so I wasn't looking into it. Once you disable it the first time, it's gone for good unless you wipe the device. Let me know if you figure out how to get rid of it though. I'm surprised there isn't just a flag to enable.
Thx, worked as expected and the good thing is : sideload don't must be fall back to the old protocol
Sorry guys first time flash on android wear however i am familiar with android phone flash. Please tell me how to install this?
long.nguyen said:
Sorry guys first time flash on android wear however i am familiar with android phone flash. Please tell me how to install this?
Click to expand...
Click to collapse
Same as with a phone. Extract the .img file from the zip attached to the post, boot watch in bootloader mode, plug into computer, fastboot flash recovery [path to twrp image file].

[P9000 Lite] [ROM] [7.1.2]AOKP Nougat [(un)official]

Rom based on this: https://forum.xda-developers.com/elephone-p9000/development/rom-aokp-nougat-t3690278
Full credits go to the AOKP team who made the rom for P9000.
To use on P9000 Lite you may need CWM 3.0.2.8 and you have to restore the backup zip provided in the link.
Features:
- Same as P9000 AOKP rom.
- Gapps (Micro) come preinstalled.
Warnings:
- The unpacked rom uses up to 5200MB, so make sure you got free space!
- Put the rom backup on an SD Card, not on internal memory.
- Fingerprint options make the settings app crash (Obviously).
Bugs:
- The rom occupies about 20GB because of a bug.
- Charging seems to be painfully slow. (If someone could fix this, it would be really awesome.)
Installation:
You have to put the folder from the zip in TWRP\BACKUPS.
It should appear and then you should be able to see the rom and install it.
Download Links:
http://aftermath-studio.go.ro/IBOVHQ49DEAML78T.zip
http://aftermath-studio.go.ro:8080/Upload/IBOVHQ49DEAML78T.zip - Edit: I also added a torrent in the attachments.
(Please post to mirrors and post comments with the mirrors, and I'll update the original post)
Good luck!
Update:
For my phone, it charged the battery a bit, or so it seems, and then it kept going down.
Not sure what the bug is, at least for now.
So keep this in mind while downloading.
Any contribution is greatly appreciated.
xnd_bogdan said:
Update:
For my phone, it charged the battery a bit, or so it seems, and then it kept going down.
Not sure what the bug is, at least for now.
So keep this in mind while downloading.
Any contribution is greatly appreciated.
Click to expand...
Click to collapse
ATM I can only point you to CONFIG_MTK_PUMP_EXPRESS_(PLUS_)SUPPORT.
Did you set the following in devconfig?
Code:
CONFIG_MTK_PUMP_EXPRESS_SUPPORT=y
CONFIG_MTK_PUMP_EXPRESS_PLUS_SUPPORT=y
Tarkness said:
ATM I can only point you to CONFIG_MTK_PUMP_EXPRESS_(PLUS_)SUPPORT.
Did you set the following in devconfig?
Click to expand...
Click to collapse
he ported the rom, doesnt seem like he build it
Ruben Craveiro said:
he ported the rom, doesnt seem like he build it
Click to expand...
Click to collapse
Yup.
That's what I did
xnd_bogdan said:
Yup.
That's what I did
Click to expand...
Click to collapse
you need to change more modules and change some stuff on boot.img i think on the file init.rc on boot.img to allow charging
Ruben Craveiro said:
you need to change more modules and change some stuff on boot.img i think on the file init.rc on boot.img to allow charging
Click to expand...
Click to collapse
I'll definitely try doing that but for now I took a break, since finals are coming.
If somebody fixes it before I get to have some free time, that would be even better to be honest.
xnd_bogdan said:
I'll definitely try doing that but for now I took a break, since finals are coming.
If somebody fixes it before I get to have some free time, that would be even better to be honest.
Click to expand...
Click to collapse
i doubt that will happend, i dont think many people use the lite version, me in particular use the normal version, so i cant really fix it.
Do we know if anyone fixed it?
Sent from my Redmi 5 Plus using Tapatalk
Hi!
Anybody fixed the problems?
Hello.
I was going to continue porting this but unfortunately my phone failed so I was forced to buy a new one.
I'm afraid I can't work on this anymore, as I no longer have a p9000 lite

Categories

Resources