Develop Bugs

Simple $3 DIY snap on vent mount (works with or without case)

I've always liked the simple use of the Garmin GPS clipping system, you just snap the unit in and that's it. When I saw the Kensington mounting system, I was ecstatic but then disappointed to find out that it would not work with my Seidio Innocase. I ended up staying with my MOBI vent mount but the vent clips aren't secure enough and the whole unit slides around when I turn and go over bumps so I went on ebay to purchased a Garmin GPS vent mount to use the coiled spring vent clips so it'll hug the vent. Turns out those spring clips don't attach to my MOBI vent mount. At this time I figured I'd just disassemble the two and get a $60 solution from ProClips. This is when I discovered my perfect solution. I just took a piece of foam from the MOBI unit and taped it to the wider clip of the Garmin GPS clipping unit and now my EVO holds securely with or without my Seidio case. It doesn't have to be a vent mount, as long as you have the Garmin GPS clippping unit and a 17mm ball mount. I've included a video:
http://www.youtube.com/watch?v=ri0AWroEzhQ
So I pretty much just bought this GPS vent mount from ebay user chxee (seems to be the only one selling them for cheap starting at 99cents. I got mine for $2.75, I've seen some going for just 99cent free shipping.)
Garmin air vent mount nuvi 255w
The foam piece can be purchased from a crafts store.
Anyways, here are the pics:

Try heating it up with a hair dryer and see if you can permanently bend it. Should work, and might be the perfect solution.

i thought about that, it was my last resort. but now with this foam workaround i think the foam gives it an extra grip to keep it from sliding.

How does that mount hold in your vent. I see it's similar to this one. http://cgi.ebay.com/Car-Air-Vent-Mo...EVO-4G-Black-/390229156793?pt=PDA_Accessories
I had a vent mount for my iPhone 3G but it was significantly lighter than the EVO, haha.

I ordered one (suction for $4.99 since I like that better), but I'm wondering if there's anything better than foam to use since that looks a bit tacky. I want it to look professional. Might try the hairdryer route, but am afraid of snappage. Let me know if you have any ideas.

Springs = CHINSEY
I had this car mount for my Evo 4G for about 2 weeks, and literally after taking the phone in and out of the cradle (Correctly, I might add. I wasn't tearing it out, rather pressing the release button, and then removing.) about twice a day for not even two weeks, both of the plastic connectors on the arm-end of the spring loaded clamp snapped off. Any suggestions on how we can reinforce this? If it hadn't snapped, I LOVED THIS THING!

[Q] A proper and secure phone holder

I would like to mount my phone to my ATV so I am looking for a smartphone holder. It musn't be a vaccum or bicycle type, because I want to mount the holder with two or four screws to the frame, so there are no doubts the phone and holder would fall off when riding on a more rough terrain..
Any suggestions?
Thanks in advance.

Why don't you look into Brodit or ProClip mounts? Hope this helps.

Thanks for your suggestion.
Active holder from Brodit should do the job, but it still isn't that secure. There is no additonal "limiter" from the left (or top if in landscape). Motorola has some excellent original holders, I wish something like that would exist for SE..

Car Dock Stand for Citroen C4 (2011 Model)

Hi guys
This question looks stupid but believe me, you must have this car to find out how big trouble it is to find a proper car dock.
Only suitable place is the air vent but that way phone becomes very hot when using navigation softwares.
If i use the ones which sticks to window then phone is unreachable properly.
So, my question is: Where did you use for docking phone?
Answers with car dock suggestions are welcome...

So i used the magnets in the link, the magnet part i put on the face of my stereo (using heavy foam double sided tape) and the metal strip with the tape on the back of the case for my phone, works great i have a few magnets up so i can change where i put the phone and the magnets aren't really noticeable, i sprayed the one on the deck with black matte paint one layer, can barely see it.
http://www.amazon.com/Magnetic-Badge-Bars-Police-Magnet/dp/B000RB1KPQ/ref=pd_ybh_11
only thing was the case im using is the official vzw kickstand case, i have the magnet around the top part of the kickstand, its not a flat surface its got a texture to it, so i just used some electrical tape and taped it around the kickstand so it wouldn't come off when dismounting from the magnet on the dash

you want something like this
They're called "Gooseneck windscreen mount". I have the same issue you do, and I also dislike vent mounts.

You can use a brodit clip
www.brodit.com/productList.html?lrhandDrive=lhd&brand=Citroen&model=C4&year=2010&pn=prod
And
www.brodit.com/productList.html?brand=Samsung&model=Galaxy+Nexus+GT-I9250&pn=prod

geek78 said:
You can use a brodit clip
www.brodit.com/productList.html?lrhandDrive=lhd&brand=Citroen&model=C4&year=2010&pn=prod
And
www.brodit.com/productList.html?brand=Samsung&model=Galaxy+Nexus+GT-I9250&pn=prod
Click to expand...
Click to collapse
I am going to buy this one. I hope it works.
Thank you.

S3 Suction car mount by Garmin!!

By pure chance I found out that my SIII with its slimline cover fitted works perfectly in my Garmin Nuvi 205 dash mount.
Secure and easy to mount, almost as if it was made for the S3.
The Garmin Part Number
Item 010-10936-00 Suction cup with bracket (Nuvi 2xx series)
Cost is around $10 - %15
Cover is a Cygnet BlackFrost Matte slim case (around $20)
I love finding a really good cost effective solution for my toys!!
Video Clip. Please excuse poor sound quality, had to dig out my old Olympus compact to make this,

Thanks, looking forward to the video.
good to know since Garmin has quality mounts.
Does it actually clip in? Is it firm?
If you remove the case, hows the fit?

Fits snugly, clips into the mount as if it was made for it,
Doesn't work without the cover though, phone is just to small,
Would be possible rather easily I might add to put some shrink tubing on the arms of the mount and build it up a little to hold the phone naked!

I wonder if it would fit with a tpu case. Your case seems pretty slim

ZaJules said:
By pure chance I found out that my SIII with its slimline cover fitted works perfectly in my Garmin Nuvi 205 dash mount.
Secure and easy to mount, almost as if it was made for the S3.
The Garmin Part Number
Item 010-10936-00 Suction cup with bracket (Nuvi 2xx series)
Cost is around $10 - %15
Cover is a Cygnet BlackFrost Matte slim case (around $20)
I love finding a really good cost effective solution for my toys!!
Click to expand...
Click to collapse
Thanks for the find. Do you think it would be able to fit the S3 with an Otterbox Commuter case on? My phone's approximately 7.7mm wide with the case on.
Cheers

Might fit but it would be tight, the rounded edges of the Cygnett case allows it to clip into the holder the otter box might be to square
Sent from my ASUS Transformer Pad TF300TG using Tapatalk 2

my garmin gps always falls off from the windshield now..the suction cup doesn't hold..don't know how i'd feel putting my phone there..
am i suppose to wash it with soap or something to make it work again?

kl25 said:
my garmin gps always falls off from the windshield now..the suction cup doesn't hold..don't know how i'd feel putting my phone there..
am i suppose to wash it with soap or something to make it work again?
Click to expand...
Click to collapse
You should get a replacement one...They are super cheap on eBay. I have one that is over 7 years old (*back when standalone GPS units were +$300!) and it still works great.

kl25 said:
my garmin gps always falls off from the windshield now..the suction cup doesn't hold..don't know how i'd feel putting my phone there..
am i suppose to wash it with soap or something to make it work again?
Click to expand...
Click to collapse
I fix that with alcohol. But then I fix everything with alcohol.

universal mount
I got this car mount from amazon.com
Search for Kropsson Aero universal mount.
the design of the mount was a great plus.
Feature wise, defiantly recommend.

proud a-clown said:
I fix that with alcohol. But then I fix everything with alcohol.
Click to expand...
Click to collapse
:laugh::good:
couldn't have said it better myself!!!!

I can confirm this mount works great with the rock quicksand case. Easy to put in and take out and holds rock solid. Before the case showed up I had used a couple pieces of heat shrink tubing held on with electrical tape and it worked awesome with the naked galaxy s3.
I like this style of mount because you can position the phone with it gripping the middle, top or bottom to fine tune where the screen is in relation to your windshield.
I went with this one though, instead of one of the $5 options: (replace spaces with ., I don't have enough posts to post links) www amazon com/gp/product/B0042PJ8NY/ref=oh_details_o00_s00_i00[/url]
It's the actual oem garmin mount instead of a knockoff, and judging by the reviews the difference is the mount that holds the ball is made of metal, so it won't break. It came with one of the 3m PE Foam adhesive backed discs for mounting to the dashboard as well. Highly recommended.

I just tried it. PERFECT fit with my diztronic TPU case. Thanks OP!

what car holders are people using

would be interested in something good to use with Fire Phone while navigating (and possible video registrator as well)

Because 300+ have viewed with no response I guess I will...lol. I think any holder that gets good reviews would work!

I am using a Mountek nGroove Snap 3 Magnetic mount, it goes in the cd slot. I use the large metal plate inside my case between the layers. I am using this case:
i-Blason Amazon Fire Phone Case- Armadillo Series 2 Layer [Ultra Slim]
Search both of those at Amazon to see pics.
Heavy phone it moves around a bit, but hasn't fallen off. I use the same setup with a Galaxy Note 2 with an extended battery which is pretty heavy, and it only fell off once or twice.

I use the Aduro U-GRIP PLUS Universal Dashboard Windshield Car Mount for Smartphones. Got it on Amazon for $10 and it works very well. Takes both hands to put the phone in it, but once it's in it stays put. An added bonus is that the actual holder part can be attached to the ball mounts that come with Garmin GPS (which I already had), so it can be used with any Garmin type holder (look at the last pic on Amazon to see what I mean).
Just got the Magnetic Phone Mount Suction Technology By Gizmount from Amazon. It was on a lightning deal so I grabbed it. Has the same Garmin type holder like the one above but uses a magnet to hold the phone. It works really well and doesn't take two hands to put the phone on or take it off.

I too use a magnetic holder that attaches to the CD holder. I love it. I also bought a $5 magnetic suction cup holder and use it at my desk. Works so great! I also did a little modding of the Amazon charger so it is magnetic too and I can just stick my phone to it to charge (I plan on writing up the howto for this soon). If anyone wants more info/links, let me know.