I am using creeds 3.2
but here is a signal bar problem
it stuck in 1 point
plz help me
how to fix this
der's no solution for that for now,sir pratty is busy on his phone,maybe nxt tym he will fix that..
Imtiaz369 said:
I am using creeds 3.2
but here is a signal bar problem
it stuck in 1 point
plz help me
how to fix this
Click to expand...
Click to collapse
Try to reflash the rom. Hope it will help
this is a bug of creed3.2
Hello sir That is actually a bug not just in Creeds ROM 3.2. It is also a bug of other custom roms that uses a modified systemui.apk (the application used to have a status bar which is built in on a stock rom)
Mr. Pratyush Creed used that modified app as a default systemui.apk it doesn't actually have a fix. (right now) that bug is bearable. even though its stucked at 1 bar, you may actually have 2 or 3 bars. Which means you can still send messages and your signal is not really weak.
One thing annoying about it is that you don't know if you have max signal, 2 bars, and also 1 bar. but if you do not want to be disturbed or annoyed by that signal bug, i suggest you change into another Custom ROM or revert back to stock rom
Try Try!
Revert back to stock ROM then try Flashing Creeds v3.2.
Hope This helps
This is a bug on Creeds' Fusion v 3.2 , Im recently using this ROM and it shows 1 bar signal even the signal is strong in my area , Pratyush is working on it
Related
Hello,
I don't have permission for posting in dev section so I'm asking my question here (yes,I did go through the forum n google to find a solution)
From the time I've started using custom roms,my camera app is not working properly. It crashes after 3-4 shots n my phone reboots. My phone freezes on the preview screen for a few seconds n then restarts. At first I thought its a rom issue but I've faced this same problem on reflex s,rcmix 2,leedroid 2.5 and SGBS and this problem never existed in the original rom.
What could be causing this? I'm using s off desire with 1gb ext partition (created using clockwork recovery screen)..
appreciate the help
thanks
Did you do full wipe before install ROM ?
If not, please do so.
If yes, I don't know the answer.
You can try install default ROM and start all over again though.
hello
thanks for the reply,I always do a full wipe when installing a custom rom..but don't know why this issue...
I'm scared to try the stock rom as I don't know what my original country was as I bought my phone from the local market without any warranty...!
someone...??
thats disappointing
try the sense 2.1 camera - it should work. To be honest I never had this problem when trying those sense-based ROMs, so no other idea.
Try flashing a newer/different radio
thanks for the replies..I didn't know the radio could have anything to do with the camera...will update n test for 2days n rite back
I'm using sgbs rite now with sense 2.1 camera...before this I had rcmixs,reflex s,Lee droids...all had similar issue,some more than the other..
BTW off topic does anyone know how I can get only sense 3 weather on sense 2.1? And which is a good sense 3 rom with stock android lock screen working...as sense 3 lock screen n caller screen is kinda annoying!
thanks
Hi,
I've purchased a a Samsung Galaxy 551 (I5510) (Middle east region) about a year ago and i was running android 2.2 fine for a while. When the Gingerbread 2.3 update came out i tried installing a European ROM because the ME ROMs weren't updated, it worked fine but had a weird glitch that if the screen was off (phone still working) for a while it would be very dark when turned on afterwards, it looked like this video:
http://www.youtube.com/watch?v=Kwll8ZfgaD0
P.S. I didn't make the video, just linking it because its the same issue
it would randomly work again after a couple of lock-screen off-unlock cycles, then happen again randomly when it's off
I tried a number of GB ROMs (mostly 2.3.4) but to no avail, then finally the latest EU ROMs (I5510XWKPJ) fixed the problem, nowhere to be seen anymore.
After that i tried installing Cyanogen mod for the phone and the problem came back with different degrees:
1. Cyanogen 7 - normal boot, screen gets dark after being off for a while.
2. Cyanogen 9,10 - show Samsung logo at start, screen gets dark as soon as the cyanogen logo appears and continues to be
Any help on what would be causing that especially on the newer CM builds? and why it doesn't happen at all in (I5510XWKPJ)
Thanks in advance,
use stock gb rom XEO-KPG from here...u find no bug in it....install as one pakage through odin...
http://galaxy551.wordpress.com/2011/12/20/new-stock-rom-xeo-kpg/
I will give it a try, though i have to clarify and say that on the current stock rom that i'm using (I5510XWKPJ) the problem doesn't happen. It only happens after i flash Cyanogenmod (any version) and persists till i reflash the Stock rom then it disappears again.
EDIT: Forgot to add that this isn't a CM specific bug as it happened also when i tried other roms too (Arkas, Miui,...)
You cannot say that this is a bug bcaz no other mamber of galaxy 551 and even me also not have this kind of problem....
So I think its problem of ur phone...
Sent from my GT-I5510 using xda premium
No change after installing (XEO-KPG) stock rom, the rom itself works fine with no problems, same as the (XWKPJ) I've been using. but as soon as i install CM the bug rears it's ugly head.
priyesh103 said:
You cannot say that this is a bug bcaz no other mamber of galaxy 551 and even me also not have this kind of problem....
So I think its problem of ur phone...
Sent from my GT-I5510 using xda premium
Click to expand...
Click to collapse
The reason i think it's a bug because it happens across lots of custom roms (which rules a rom being the cause) and it never happens when using the 2.3.6 stock roms. And on the custom roms it only happens after the screen has been off for a while, if i set the screen to never turn off for instance it never happens, but that butchers battery life.
IMO it might be a display driver issue, but since i have no experience with it i came here to get some help
Bump, any help would be appreciated.
Hello. I have very strange problem with my Desire. When i flash any Sense ROM (Alex-V, Revolution, Runny Rom and others...) my phone work good. BTW.. i have a problem with signal indication... he's awlays ot 2 maximum 3 lines... but when signal is FULL phone's freez... and this happened only with sense roms.. when i'm with any CM7 rom .. i dont have problems.. signal is a 2-3 lines.. and when he goes full for 5-10 sec... phone working good.. but with sense roms he freez and i need to remove battery ...
TNX....
P.S Sorry about my bad english
Try changing radio image or ril. I usually advise not to play with it but since it's not working already, you have nothing to loose.
Sent from my HTC Desire using Tapatalk 2
I'm with last radio ... cm7 r2 hboot... any other ideas ?
Hey, I recently installed the PACman v20.1.0 ROM (4.2.2) and everything's working fine except the bottom of my screen is unresponsive. No matter how much you touch is it doesn't work. The unresponsive space is the bottom half of the icon row on the homescreen dock, the top of the icon is still responsive. Can someone help me out here? (sorry if this is a noob question or mistake ) Thanks!
bramsubhag said:
Hey, I recently installed the PACman v20.1.0 ROM (4.2.2) and everything's working fine except the bottom of my screen is unresponsive. No matter how much you touch is it doesn't work. The unresponsive space is the bottom half of the icon row on the homescreen dock, the top of the icon is still responsive. Can someone help me out here? (sorry if this is a noob question or mistake ) Thanks!
Click to expand...
Click to collapse
Change the trigger area and make it to small...if you change it to none the screen would flicker.
Settings>toolbar>trigger area>small
Or
Toolbar>pie gravity>left/right/whatever you want
I just change the trigger area to small and it helps. No pie for me though
zxstyle07 said:
Change the trigger area and make it to small...if you change it to none the screen would flicker.
Settings>toolbar>trigger area>small
Or
Toolbar>pie gravity>left/right/whatever you want
I just change the trigger area to small and it helps. No pie for me though
Click to expand...
Click to collapse
It worked! Thanks so much :good:
pacman rom flash problem!!!!
I need some help here!!! I'm getting real frustrated trying to flash this pacman ROM....I keep getting stuck on the booting logo it just won't go through the logo...I guess its boot looped...I did everything right on installing it right...wipe/factory reset,flash ROM,flash gapps,reboot...even tried wiping/factory reset,wipe cache,install ROM,install gapps,wipe davlik,fix permissions n reboot...I even tried format system....I don't know what to do now...I have no problem flashing mr1 build 6 AOKP ROM,and one before that was mr1 build 5 AOKP...and also before that I had the cm10 ROM....can somebody help me out here...I really want to check this ROM out....do I need to update my CMW recovery cause I'm working with 5.0.2.6.....or do I need to flash it from my sdcard instead of my internal sdcard cause that's were I flashed the rest of my ROMs....I got the AOKP mr1 build 6 ROM now but like I said I really want to check out pacman ROM...somebody help if somebody can????
i posted in the other thread you had posted but yes do yourself a favor and update your CWM to the latest via Rom manager and you wont have to use those scripts anymore when you do flash roms
steve/pacman rom issue
GOODNEWS!!!! I ACTUALLY UPDATED THE CMW RECOVERY TO TEAM WIN RECOVERY N IT WORKED FLASHING THE PACMAN ROM...I GYES CMW RECOVERY 5.0.2.6 DOESNT WORK WITH THAT ROM....THANKSFOR REPLYING BACK....I got one more question if you can help mw with it...do you
know of any kernels i can flash with the pacman rom for my tmobile galaxy s2...also is there any lockscreen mods too out there that will work with
pacman...i have some aokp lockscreen mods for the different colore but i am not sure it would work w pacman rom...thanks bro!!!
dose8888 said:
GOODNEWS!!!! I ACTUALLY UPDATED THE CMW RECOVERY TO TEAM WIN RECOVERY N IT WORKED FLASHING THE PACMAN ROM...I GYES CMW RECOVERY 5.0.2.6 DOESNT WORK WITH THAT ROM....THANKSFOR REPLYING BACK....I got one more question if you can help mw with it...do you
know of any kernels i can flash with the pacman rom for my tmobile galaxy s2...also is there any lockscreen mods too out there that will work with
pacman...i have some aokp lockscreen mods for the different colore but i am not sure it would work w pacman rom...thanks bro!!!
Click to expand...
Click to collapse
I'd recommend the cerux kernel. I havent played with the lock screen on the 22.0.01 update yet, so i cant give you an answer on that. But make sure you do a backup before you try any mods, so you can always go back if you accidently messed it up.
Can some one pls tell me if wifi diconect while blue tooth on bug is fixed on cm based romS?here is the wifi problem link. its on every android devise it seems ..a software bug on stock romshttp://code.google.com/p/android/issues/detail?id=41631 idont want to unlock bl with out knowing.My stock rom has this broblem .Thanks in advance