My LG Nitro will boot up, but the touch screen is not functioning. The power button turns it on, the lock screen appears, and notifications pop up in the upper corner, but it will not react to any touch.
It happened a couple of times before but a few battery removals did the trick...not any more...
It will not unlock...What do I do?
I searched around and it doesn't seem like anyone else is having this problem. Thanks!
Did you try a factory data reset?
mookacb said:
My LG Nitro will boot up, but the touch screen is not functioning. The power button turns it on, the lock screen appears, and notifications pop up in the upper corner, but it will not react to any touch.
It happened a couple of times before but a few battery removals did the trick...not any more...
It will not unlock...What do I do?
I searched around and it doesn't seem like anyone else is having this problem. Thanks!
Click to expand...
Click to collapse
You might have a bad digitizer.
Related
When I boot up after reset or power off, the homescreen displays top task bar, bottom soft keys, and displays "launching TouchFlo3D..." and then... nothing. The screen stays like this until I tap it, and then it displays the home screen. Anybody else seeing this?
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
I have never got no one to answer a question on here good luck...
PaulusUK said:
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
Click to expand...
Click to collapse
Does touching the screen make it start?
I know that not turning off TF3D before installing some cabs can make it behave oddly- TF3D restarts, fails to launch at boot, etc...
Mine does the same thing except its just a plain screen until I touch it then it says launching tflo
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
acrh2 said:
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
Click to expand...
Click to collapse
It has something to do with the PIN lock code, you're right.. now we just need someone to look into this further who knows how to troubleshoot these issues from the back-end.
Bump for more answers!
-mak
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile
Everytime I boot my phone up, it works fine up until when the screen goes into sleep mode. Once it goes into sleep mode I cannot turn the screen back on, it stays black. The keyboard, end and answer key lights show up when I press the power button but the screen just stays black no matter what button I press.
I end up having to either take the battery out or using the stick to press the reset button on the side in order to get the phone to where I can see the screen again. I have adjusted the settings to where the screen doesnt go into sleep mode and the screen just stays on but that drains my battery. I want to be able to have my screen go off so I can save power but if it goes off it wont come on again until I reboot.
I have done a hard reset. This problem started happening to me when I started using the Energy Rom but I've even flashed different Roms and the problem still exist.
Somebody please tell me what's wrong! I need help! This is a big annoying problem to have. Thanks.
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
sh4d0w86 said:
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
Click to expand...
Click to collapse
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
themasterhook2000 said:
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
Click to expand...
Click to collapse
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
sh4d0w86 said:
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
Click to expand...
Click to collapse
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
themasterhook2000 said:
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
Click to expand...
Click to collapse
: / sorry. i am unsure.
maybe you have a lose connection?
sh4d0w86.
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Same problem
themasterhook2000 said:
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Click to expand...
Click to collapse
My phone also dos not come back on, when I put it in out the sreen with the power button on top, or when the phone goes to sleep. Nothing can put it back on(opening te keyboard, pulling out the stylis, presing the answer-, windows-, back- and end button). I and up using a music players too keep the phone busy what's makes it operational. Cant really remember when this started happening exactly. My phone is at the moment loaded with a standard ROM. I used too have a custom ROM.
My TP2 does this too, although I only encounter the problem sometimes when someone calls. I answer and put the phone next to my ear, the screen goes black as it should and the phone just dies. I can't hear what the other person is saying and the screen wont turn on anymore. I have to take out the battery to reboot.
set light sensor to manual in settings. You have some bad or fragmented code causing the problem. Pretty common actually, many different reasons, but usually either a bad light or proximity sensor or software issue. Setting the sensor to manual should do it, if not, hard reset and allow the phone to fully set up before touching it, to allow full customization process to complete. Search my posts on SOD (sleep of death) for more information.
Funny this was brought up. Now im worried I just dropped 250.00 and have a new one coming.
Mine started with the ear piece quit working. couldnt hear anything except on speaker.
Anyway I started having the screen issue over a month ago, only way to get it back was soft reset with the stylus. Also when the screen was lit, I couldn't hit the power button to turn the screen off. At times the screen would be on 24/7 and I just dealt with it. The times when it decieded to go to sleep was when I needed the soft reset. Well long story short I forgot my charger one day at work and the battery died. after pressing the power button for hours with no response, moving the screen in all diffrent directions as I pressed the button.It came on once after hrs of messing with it. Well today it died again and I am fed up with it so out came the tools. Once I opened it up I noticed the ribbon that feeds the screen from the mother board was worn and torn. the ribbon slides everytime the keyboard is slid out and it rubs on both sides of the phone. I thought maybe mine was just a fluke and was installed wrong considering the phone being 10 months old but now I read this and see maybe its a common problem. The cheapest I could find the Ribbon was 56.00 so I didnt want to chance it not being the issue.
Just want to know if people have experienced weird problems with their touch screen on their Gnexus, i've had this phone for less than 1 week, and the problem arised twice.
the screen just dont reach to your finger touch, normally you swipe left or right in the home screen, and the pages just moves to the next screen centered, but the screen just stops when ever you let go, and on home screen when you push and hold an icon or widget the bin pops up at top to discard the item, on my phone, just a slight touch and no need to touch and hold will do the same thing. it's just like the screen has gone malfunction randomly with the screen registering a touch. I also think this happed when it is connected to a non samsung charger, but not too sure if i had the charger connected.
to rectify the problem, you need to power down the phone and on.
not too sure if this is a bug, or problem with the display, it's very hard to discribe it, but it's not normal.
thanks
Very strange problem. I have a LG G3 D855 for 1 and a half years now(rooted)
My phone was at a very low percentage, and I heared it go out. Happens to everybody, nothing strange so far.
I connected it to the charger and I turned it on, i heared the startup noise, but nothing happened. No pincode screen or unlock screen. Stuck at LG life is good screen. I actually was able to take a screenshot, i heared that sound when pressing power and volume down key. I know it is just right away from the main screen, but why is my screen freezing at startup logo? Tried to hard reset and clear all data, then I get a secure confirmation (verify) error. then my led starts to flash red and blue. Battery taking out and still no success.
How to fix this? Also screen is recognizing touch at the startup screen (when it fades away i click on it and it turns brighter)
EDIT: I blindly went into whatsapp and i am able to type and answer calls blindly wtf. Now I got a blue screen, everything is operational, the screen is blue now
Phone is functional, the screen is stuck on boot (life is good screen or blue screen)
How to fix?
Lol, the day after I hit my phone on the screen and restarted it and it worked again! I really dont know how it works again, but lmao! Also my secure boot sector is not working, that problem has nothing too do with this fixed one.
My wife's phone looked completely dead this morning, so I pulled the battery and then rebooted. The led did its usual start up pulse but the screen remained black.
Double tapping to wake, then tapping the centre of the screen where login field is, then tapping where the keyboard is, results in haptic feedback, but the screen never turns on from black.
Tried holding down + power to boot into recovery, but no idea if it works. No response from the screen.
Anything I can try? :crying:
judith prietht said:
My wife's phone looked completely dead this morning, so I pulled the battery and then rebooted. The led did its usual start up pulse but the screen remained black.
Double tapping to wake, then tapping the centre of the screen where login field is, then tapping where the keyboard is, results in haptic feedback, but the screen never turns on from black.
Tried holding down + power to boot into recovery, but no idea if it works. No response from the screen.
Anything I can try? :crying:
Click to expand...
Click to collapse
Its the faulty motherboard chipset issue, same as me.
Take the phone apart and place a piece of plastic or something on top of the display ribbon connector underneath the battery. That solved this problem for me.
Seems to occur because the board in the g3 has too much space to flex etc in general usage.