Upgrading a scroll tablet v2 51624 - Upgrading, Modifying and Unlocking

Hi,
I acquired a non working scroll tablet v2 TCC 8900 Android 2.1 which i have now got working with little effort
I would like if possible to update it to Android 2.3 or equivalent if possible. Any help or advice would be great thankyou.
Heres is info
Model Number : - Scroll(SCR051624)
Firmware Version :- v1.02s
Baseband Version :- v1.02s
Kernel Version :- linux kernel 2.6.29

Guess there is no answer for my post

Related

Defy & Defy+ stock ROM kernel versions

I'm interested to know what kernel versions different stock firmware builds have. I'm not aware of this information being readily available elsewhere so I thought I'd try a bit of crowdsourcing, and ask folks to post what their phones show in the "About phone" section of system settings. I'll start the ball rolling:
Kernel version
2.6.32.9-g15cc991
[email protected] #1
Build number
4.5.1-134_DFP-82

US Cellular Info

Android version - 2.3.6
Baseband Version - S:R760.01 K.FB14
Kernel version - 2.6.35.7-SCH-R760.FB14-CL963624 [email protected] #2
Build number - GINGERBREAD.FB14
Here is the information on the US Cellular version of the SE4GT. Not sure if anyone can deduce what this stuff means or how it applies to root and CWM

How can you tell which kernel you are currently running?

A forum search turned up nothing, so I'm asking here:
On most Android phones, you usually go to Settings->About Phone and look under the "Kernel Version" section to see the name and version of the kernel you are running.
With my Galaxy Nexus, I don't see kernel names. Instead, I see something like:
Code:
3.0.31-g6fb96c9
[email protected])
#1 SMP PREEMPTY Thu Jun 28 11:02:39 PDT
2012
No matter which kernel I flash, it always seems like the same type of info but no names or version numbers.
I was okay with that as long as I remembered what I flashed last. However, I recently reverted to stock but the kernel looks like it stayed the same. Is there anyway to check if I'm back on stock kernel or still running the last kernel flashed (franco, in my case)?
I'm running leankernel 4.3.0 it says the version
Sent from my Galaxy Nexus
drdoombot said:
A forum search turned up nothing, so I'm asking here:
On most Android phones, you usually go to Settings->About Phone and look under the "Kernel Version" section to see the name and version of the kernel you are running.
With my Galaxy Nexus, I don't see kernel names. Instead, I see something like:
Code:
3.0.31-g6fb96c9
[email protected])
#1 SMP PREEMPTY Thu Jun 28 11:02:39 PDT
2012
No matter which kernel I flash, it always seems like the same type of info but no names or version numbers.
I was okay with that as long as I remembered what I flashed last. However, I recently reverted to stock but the kernel looks like it stayed the same. Is there anyway to check if I'm back on stock kernel or still running the last kernel flashed (franco, in my case)?
Click to expand...
Click to collapse
Most (if not all) kernels have a name similar to stock. But there is usually something amongst the numbers and letters which point to what kernel your running.
For instance my phone running trinity.
I know its trinity because it says dirtymorfic, morfic being the xda name of the trinity kernel developer. I only use stock kernel and trinity so can't comment on the others, but it will always look similar but also always have something pointing to the kernel your using. Hope this helps
Sent from my Galaxy Nexus using Tapatalk 2
Also typing code below in terminal will give you some more bits of info.
Code:
cat /proc/version
good day.
question
sir i want to ask 2 questions :
my phone specifications after flashing jelly blast v2 are:
android version:4.1.1
baseband version :S5360DDLC2
KERNEL VERSION : 2.6.35.7 [email protected]#1
BUILD NUMBER :NXT2ICSv2:jelly blast
1.i want to install jelly blast v3 what i have to do?
2. installing a custom rom change a kernel version or not ?
sunil332011 said:
sir i want to ask 2 questions :
my phone specifications after flashing jelly blast v2 are:
android version:4.1.1
baseband version :S5360DDLC2
KERNEL VERSION : 2.6.35.7 [email protected]#1
BUILD NUMBER :NXT2ICSv2:jelly blast
1.i want to install jelly blast v3 what i have to do?
2. installing a custom rom change a kernel version or not ?
Click to expand...
Click to collapse
Why did you bump a thread that's months old, and you don't even have our device?
Sent from my Nexus
a small doubt about sony xperia z ultra
there is a date under the kernel.
but that is not the same as the date of purchase
date of purchase is june 12 2015 at 12pm
date in the kernel is june 12 2014 at 2pm
am i being cheated with an old or used phone?
also the video clarity is very bad for a FHD screen
help me please
mnanoop said:
there is a date under the kernel.
but that is not the same as the date of purchase
date of purchase is june 12 2015 at 12pm
date in the kernel is june 12 2014 at 2pm
am i being cheated with an old or used phone?
also the video clarity is very bad for a FHD screen
help me please
Click to expand...
Click to collapse
1. Kernel and rom are developed much earlier, you weren't cheated.
2. Video clarity? Do you mean the video recording quality or the screen quality?
im running cm12 (android 5.1.) on my lg d855 right now, and it shows my kernel version in the "about phone" category.

[TESTER NEEDED][ROM][GB] codename

Hi there..
I'm from Xperia Neo thread.
As the title stated, i need a tester for my rom on Arc.
For info about my GB rom, go here: CLICK CLICK
The latest version (test release) can be download from here:
codename X edition - almost done
And patch for Arc are attached.
Requirement:
- unlock bootloader (for now)
- on baseband 64, 70 or 72 (some user having issue with 77)
- any kernel for stock GingerBread
Thanks in advance
A placeholder for me..
Note:
- the final version of codename X edition is coming really soon
- i don't want to open a new thread on Development yet
- this thread will (may)be General Q&A for codename - Arc/S branch
- provide your feedback

Grom V-line

Hi All.
I am new to XDA so please be gentle and I need some help.
I have a GROM V-Line system installed and it has been giving me hell these last 11 months and I am unable to get a refund from the buyer. It is android powered and uses a custom rom etc. I was wondering if anyone out there has any knowledge of these units and can guide me through a way to maybe update the system to remove custom ROMs so I can use it as a normal android type device.
The current set up is running on Android 5.1.1
Kernel version: 3.10.0 [email protected] #11
Build number: Lite_VL1.6.0.0
Not sure if there is anything I could, I am ready for throwing this out of my motor now.
Please help.
Ta
Kanjar2020 said:
Hi All.
I am new to XDA so please be gentle and I need some help.
I have a GROM V-Line system installed and it has been giving me hell these last 11 months and I am unable to get a refund from the buyer. It is android powered and uses a custom rom etc. I was wondering if anyone out there has any knowledge of these units and can guide me through a way to maybe update the system to remove custom ROMs so I can use it as a normal android type device.
The current set up is running on Android 5.1.1
Kernel version: 3.10.0 [email protected] #11
Build number: Lite_VL1.6.0.0
Not sure if there is anything I could, I am ready for throwing this out of my motor now.
Please help.
Ta
Click to expand...
Click to collapse
Hi Ta,
I installed the Vline VL2 in my Lexus two weeks ago and initially had issues.
Here's my versions out of the box.
System update is Android 8.1 with last security patch dated Jan 5, 2019 and won't update further.
Kernel: (gcc version 6.3.q 20170404 (Linaro GCC 6.3-2017.05))
[email protected] #3
Fri Mar 19 05:27:15 PDT 2021
Vline shows VCore: V20VL3.37.0.0
VBase: 32.38 (L22)
No further updates available.
DashLinq version: 5.5.2.5
Knob Helper version: 1.0
WebView Shell version: 1.0
---
I was initially pissed too but after several resets my system is pretty stable.
One item that remains an issue is crashing when I have any SD card installed...As long as no SD card installed then system runs pretty good.
Several issues via launch controller were fixed with a $1.99 replacement launcher named AGAMA by altercars.ru. https://altercars.ru/#about

Categories

Resources