Related
My screen is now showing a phone icon, 2 dots, a yellow triangle with exclamation point, 2 dots and a picture of a computer.
I was trying to odin back to stock after being boot looped. The Odin failed
any ideas?
ShotgunSam said:
My screen is now showing a phone icon, 2 dots, a yellow triangle with exclamation point, 2 dots and a picture of a computer.
I was trying to odin back to stock after being boot looped. The Odin failed
any ideas?
Click to expand...
Click to collapse
How did you get there? Did it "just happen" ?
What happens if you pull the battery and hold all 3 buttons to boot into bootloader?
Unless you were flashing a bootloader and it crashed, it isnt bricked. Boot to bootloader (vol down + vol up + power) and flash a stock image with fastboot
I use fastboot for everything, i'd rather not touch ODIN.
ShotgunSam said:
My screen is now showing a phone icon, 2 dots, a yellow triangle with exclamation point, 2 dots and a picture of a computer.
I was trying to odin back to stock after being boot looped. The Odin failed
any ideas?
Click to expand...
Click to collapse
It's not bricked unless it's a brick, as in it won't power on at all.
Give us some more info and we can try to help. What have you done to it so far? What were you doing when it got to this point?
Ok all I was trying to do was root it using birdmans instructions on rootzwiki. Unlocked the bootloade.r fine, tried to flash cwm and it pushed it fine. But when I rebooted it would bootloop, I could get into cwm but not mount anything.
So I tried some instructions here to odin back a stock image, I had a charge, so I am comfortable with odin, it wrote everything, but failed. Now I get the screen described above and can't get to any other screen no matter what I press.
ShotgunSam said:
Ok all I was trying to do was root it using birdmans instructions on rootzwiki. Unlocked the bootloade.r fine, tried to flash cwm and it pushed it fine. But when I rebooted it would bootloop, I could get into cwm but not mount anything.
So I tried some instructions here to odin back a stock image, I had a charge, so I am comfortable with odin, it wrote everything, but failed. Now I get the screen described above and can't get to any other screen no matter what I press.
Click to expand...
Click to collapse
Your original boot loop was probably due to not clearing the cache?
CanaganD said:
Your original boot loop was probably due to not clearing the cache?
Click to expand...
Click to collapse
I wish, each step everything was cleared and then tried clearing multiple times after the loops started.
the odd thing was when i tried to mount usb through cwm, it couldn't find some sort of files. I was trying to install via zip the su.zip, but the only folder that was showing up on cwm was the clockworkmod folder, no other choices,
Okay, well I am back to the boot looping after successfully flashing odin, it didn't fix the original problem of bootlooping at the google screen.
I cannot mount anything to put anything on the sdcard. From what I can tell, I will have to push something using adb commands. but I am not sure what exactly.
so you used this below and it wont boot?
http://forum.xda-developers.com/showthread.php?t=1394051
no, the original bootloop happened when doing this:
http://rootzwiki.com/topic/12013-welcome-to-rootzwiki-editionstep-by-step-oem-unlock-and-root/
I attempted to use the Odin to fix it, which it did not.
ShotgunSam said:
no, the original bootloop happened when doing this:
http://rootzwiki.com/topic/12013-welcome-to-rootzwiki-editionstep-by-step-oem-unlock-and-root/
I attempted to use the Odin to fix it, which it did not.
Click to expand...
Click to collapse
Im asking what file did you use in odin?
I think I know what you did wrong. Did you use the correct cwm image.
321jurgen said:
I think I know what you did wrong. Did you use the correct cwm image.
Click to expand...
Click to collapse
I used the toro image. would it had put cwm on there if I used the gsm image?
I am currently working through http://forum.xda-developers.com/showthread.php?t=1399210
to try to fix it.
Sorry I see now you have verizon. That means you need to have the toro. I will do some research hopefully I can help you. I thought I had the same problem because I came in the same situation when I used the wrong cwm image.
droidstyle said:
so you used this below and it wont boot?
http://forum.xda-developers.com/showthread.php?t=1394051
Click to expand...
Click to collapse
yes, that is what I tried to flash through odin, it failed the first couple of times but when I changed computers, it flashed, but did not fix the boot loop.
Update, I flashed a stock image via adb through the instructions I mentioned above.....and..... SUCCESS!
I think my original problem was I freaked out when it cycled the colored thing longer than normal. After flashing the stock image today, it cycled the color things for a long time, then rebooted itself and cycled through a long time again. but eventually came up.
I appreciate everyone who took time to read this thread and chimed in.
Well, something strange happened and i have no idea what the prob is
yesterday i installed a new kernel for my gnex and made a backup (using CWM) before flashing. Today i decided to go back to the previous kernel so i just went to recovery and restored from the backup. It installed successfully and then i rebooted my phone twice just to be sure everything was working and it was untill 4-5 hours later, I was playing a game (temple run) when suddenly the phone turned off and restarted by itself, i though maybe the game crashed and its restarting but i kept waiting for an hour but the phone was just stuck at the google logo. After waiting, i decided to go to recovery and flash a new kernal or restore but when i went to the bootloader and selected recovery, the phone didnt go into recovery but its stuck in google loop again. so somehow i think the recovery has been deleted of something like that because it gets stuck in loop if i go to recovery :/
i am on 4.0.3 codenamed android rom
Thanks
EDIT: I have already tried removing the battery for some time but still i am not able to enter recovery. i thought recovery was to prevent such things :$
You should probably use search next time. It's happened to quite a few people (myself included).
Use fastboot/ODIN to flash stock rom again.
case0 said:
You should probably use search next time. It's happened to quite a few people (myself included).
Use fastboot/ODIN to flash stock rom again.
Click to expand...
Click to collapse
Thanks but i wont be able to recover my data using this right?:/
No I don't think so, it sucks. I thought they had fixed this bug in 4.0.3 though which is strange. I lost my data twice within a month because of this, when I was on 4.0.2 (or maybe 4.01). Haven't had it since I rooted and updated.
Try flashing the recovery again. Maybe it will work.
case0 said:
No I don't think so, it sucks. I thought they had fixed this bug in 4.0.3 though which is strange. I lost my data twice within a month because of this, when I was on 4.0.2 (or maybe 4.01). Haven't had it since I rooted and updated.
Click to expand...
Click to collapse
can you tell me which tut to follow? i searched and found ODIN files for 4.0.4 and 4.0.2 but i'm on 4.0.3
sry but this is my first android phone and i have no previous knowledge
efrant said:
Try flashing the recovery again. Maybe it will work.
Click to expand...
Click to collapse
already tried that. manually and also using toolkit but i get the same error something like "recovery status read failed too many links"
Thanks for replies btw
rollerdyke44 said:
can you tell me which tut to follow? i searched and found ODIN files for 4.0.4 and 4.0.2 but i'm on 4.0.3
sry but this is my first android phone and i have no previous knowledge
already tried that. manually and also using toolkit but i get the same error something like "recovery status read failed too many links"
Thanks for replies btw
Click to expand...
Click to collapse
Use the Odin files for 4.0.4. Why are you looking for 4.0.3?
Sent from my Galaxy Nexus using Tapatalk 2
efrant said:
Use the Odin files for 4.0.4. Why are you looking for 4.0.3?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
well i am on codenamed android based on 4.0.3 so i was looking for 4.0.3 files for ODIN. this will flash my firmware to stock 4.0.4 right?
And do you know of ANY WAY i can fix my phone so that i can recover my data? I have tried everything but to no avail. i have tried flashing recovery, booting recovery (not flashing) using different usb ports and cables, flashing boot.img from codename android and everything i read online :/
rollerdyke44 said:
this will flash my firmware to stock 4.0.4 right?
Click to expand...
Click to collapse
Yes.
rollerdyke44 said:
And do you know of ANY WAY i can fix my phone so that i can recover my data? I have tried everything but to no avail. i have tried flashing recovery, booting recovery (not flashing) using different usb ports and cables, flashing boot.img from codename android and everything i read online :/
Click to expand...
Click to collapse
What happens when you boot CWM?
In order to recover anything, you need to be booted either into Android or CWM.
Maybe try using the "no-wipe" odin files, which may allow you to either boot into the ROM or allow you to boot CWM, and then you can retrieve your data. However, if this does work, I would recommend you wipe right after you retrieve your data, then restore your files, as you may have issues later on running with that data on your device.
efrant said:
Yes.
What happens when you boot CWM?
In order to recover anything, you need to be booted either into Android or CWM.
Maybe try using the "no-wipe" odin files, which may allow you to either boot into the ROM or allow you to boot CWM, and then you can retrieve your data. However, if this does work, I would recommend you wipe right after you retrieve your data, then restore your files, as you may have issues later on running with that data on your device.
Click to expand...
Click to collapse
thanks for your quick reply mate
I am not able to boot into recovery. When i select enter recovery from bootloader then it just loops on the google logo. When i try to reinstall cwm then it fails everytime with the error i mentioned above
ohh and btw, sometimes when the cwm installation fails then the bootloader gets stuck and the screen becomes kind of blurry and i have to take out the battery...... is that normal?
And i'll first try the no wipe files (from here http://forum.xda-developers.com/showthread.php?t=1586807&highlight=odin) and see if that works
rollerdyke44 said:
thanks for your quick reply mate
I am not able to boot into recovery. When i select enter recovery from bootloader then it just loops on the google logo. When i try to reinstall cwm then it fails everytime with the error i mentioned above
ohh and btw, sometimes when the cwm installation fails then the bootloader gets stuck and the screen becomes kind of blurry and i have to take out the battery...... is that normal?
And i'll first try the no wipe files (from here http://forum.xda-developers.com/showthread.php?t=1586807&highlight=odin) and see if that works
Click to expand...
Click to collapse
What happens when you boot CWM via fastboot?
fastboot boot cwm.img
efrant said:
What happens when you boot CWM via fastboot?
fastboot boot cwm.img
Click to expand...
Click to collapse
i get a blurry recovery mode picture (that hat kind of thing) for a couple of secs and then the phone reboots and again in boot loop[
rollerdyke44 said:
i get a blurry recovery mode picture (that hat kind of thing) for a couple of secs and then the phone reboots and again in boot loop[
Click to expand...
Click to collapse
Oou, that doesn't sound good. Not sure you'd be able to save your data.
efrant said:
Oou, that doesn't sound good. Not sure you'd be able to save your data.
Click to expand...
Click to collapse
well lets hope for the best
And i was on codenamed 4.0.3 so if i use the "no-wipe" files for 4.0.4 it should not cause anymore problems right?
I'll first use ODIN with no wipe files and if that doesnt work then i guess i'll say bye bye to my data and do a full wipe.
Thanks for you help mate and i will reply with the result in an hour or so (dinner time now )
Thanks again
EDIT:
so i ran ODIN but now its stuck. the start button has been greyed out with the following message
"<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
"
and the phone is on the ODIN download mode screen :/
EDIT 2:
when i use the full image, then the ODIN downloading screen on my nexus becomes blurry when ODIN on pc shows "<ID:0/011> NAND Write Start!! "
PLease help as i really dont know what else can i do
Fu*kkkkk
i think its bricked now i cant even access the bootloader the phone doesnt even turn on now i cant even get the google logo just a black screen
rollerdyke44 said:
Fu*kkkkk
i think its bricked now i cant even access the bootloader the phone doesnt even turn on now i cant even get the google logo just a black screen
Click to expand...
Click to collapse
It may not be bricked. Not being able to get into the bootloader can happen when you flash via odin.
Can you not boot into download mode (hold volume down and then press and hold power)? If you can, then you can still flash via odin.
I haven't really used odin too much, so I won't be able to help you troubleshoot too much (maybe ask in Chainfire's thread), but: if you can boot into download mode, do it, and re-follow the instructions in this post to-the-letter. Use the full odin image, not the no-wipe one.
efrant said:
It may not be bricked. Not being able to get into the bootloader can happen when you flash via odin.
Can you not boot into download mode (hold volume down and then press and hold power)? If you can, then you can still flash via odin.
I haven't really used odin too much, so I won't be able to help you troubleshoot too much (maybe ask in Chainfire's thread), but: if you can boot into download mode, do it, and re-follow the instructions in this post to-the-letter. Use the full odin image, not the no-wipe one.
Click to expand...
Click to collapse
noooooo
i cant even get the fone in download mode. the phone screen is completely black!!!! Wont even vibrate which shows its starting up
pleaaassseeee heeelppp
now i am getting scared for my nexus
rollerdyke44 said:
noooooo
i cant even get the fone in download mode. the phone screen is completely black!!!! Wont even vibrate which shows its starting up
pleaaassseeee heeelppp
now i am getting scared for my nexus
Click to expand...
Click to collapse
Take a slow deep breath and exhale. Take out the battery. Wait for a while. Put the battery back in.
Hold down the volume down button (not the volume up) and then press and hold power for 15 secs. See if that gets you into download mode. Even if nothing shows up on the screen, try following the steps in the odin thread.
You did make sure only the checkmarks that needed to be there were there in odin, correct?
efrant said:
Take a slow deep breath and exhale. Take out the battery. Wait for a while. Put the battery back in.
Hold down the volume down button (not the volume up) and then press and hold power for 15 secs. See if that gets you into download mode. Even if nothing shows up on the screen, try following the steps in the odin thread.
You did make sure only the checkmarks that needed to be there were there in odin, correct?
Click to expand...
Click to collapse
Which checkmarks should be used?
TwinkyOfHope said:
Which checkmarks should be used?
Click to expand...
Click to collapse
Why don't you take a look at the linked (a few posts up) odin thread and see for yourself?
Noob here, please be patient.
Samsung SGH-T989D was running CM 9. Did a factory reset as I was planing to sell the phone, but once I did that the phone was stuck in a loop at the boot logo.
Tried upgrading via recovery mode to the new CM 10, but was still stuck in boot loop.
Tried clearing cache, etc...but nothing would work.
So I downloaded the newest stock Telus ROM, put the phone into download mode and used Odin to flash - however Odin failed.
Now the phone won't start and I immediately get the following message: "Firmware upgrade encounted an issue. Please select recovery mode in Kies and try again".
I tried Kies recovery mode but it does not see my phone. Odin still sees it, but wont flash it.
I found this thread for the S2 - http://forum.xda-developers.com/showthread.php?t=1457458.
But I have not been able to find one for the S2x.. Where would I find the bootloader and kernel to flash as it explains in the above guide...
Or maybe someone has other advice?
Thanks for your help!!
http://forum.xda-developers.com/showthread.php?t=2076939
Lots of stuff the t989 there. Just be sure you actually have the t989 or t989d.
Or look through our dev section for probably more up to date stuff.
Sent from my cell phone telephone
---------- Post added at 07:35 PM ---------- Previous post was at 07:34 PM ----------
Forget the other thread you found. That's not our phone and anything there that you flash could brick your phone!!
Sent from my cell phone telephone
fruzmatik said:
Noob here, please be patient.
Samsung SGH-T989D was running CM 9. Did a factory reset as I was planing to sell the phone, but once I did that the phone was stuck in a loop at the boot logo.
Tried upgrading via recovery mode to the new CM 10, but was still stuck in boot loop.
Tried clearing cache, etc...but nothing would work.
So I downloaded the newest stock Telus ROM, put the phone into download mode and used Odin to flash - however Odin failed.
Now the phone won't start and I immediately get the following message: "Firmware upgrade encounted an issue. Please select recovery mode in Kies and try again".
I tried Kies recovery mode but it does not see my phone. Odin still sees it, but wont flash it.
I found this thread for the S2 - http://forum.xda-developers.com/showthread.php?t=1457458.
But I have not been able to find one for the S2x.. Where would I find the bootloader and kernel to flash as it explains in the above guide...
Or maybe someone has other advice?
Thanks for your help!!
Click to expand...
Click to collapse
All u need to do is download Odin 1.85 to ur PC, then go to http://techerrata.com/browse/twrp2/hercules and download the twrp 2.6.6.0.tar.md5 to ur PC, power ur phone on in download mode, the same screen will come up "firmware...issue", kids will do nothing for this and u will need to make sure kids is NOT RUNNING. Odin will not see the device if kies is running at all, now open the Odin program and connect the phone to PC using OEM factory USB cable, on Odin it should say "added", now click the box PDA, find the twrp file u downloaded b4, click on that file and then hit start in Odin, DO NOT CHECK ANYTHING ELSE... Let Odin do its thing and u will be fine, Odin will reboot the phone and u will now have twrp recovery, boot to recovery to finish rooting process
Sent from my SGH-T989 using xda premium
soupysoup said:
All u need to do is download Odin 1.85 to ur PC, then go to and download the twrp 2.6.6.0.tar.md5 to ur PC, power ur phone on in download mode, the same screen will come up "firmware...issue", kids will do nothing for this and u will need to make sure kids is NOT RUNNING. Odin will not see the device if kies is running at all, now open the Odin program and connect the phone to PC using OEM factory USB cable, on Odin it should say "added", now click the box PDA, find the twrp file u downloaded b4, click on that file and then hit start in Odin, DO NOT CHECK ANYTHING ELSE... Let Odin do its thing and u will be fine, Odin will reboot the phone and u will now have twrp recovery, boot to recovery to finish rooting process
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Went to the site you linked but there is no twrp 2.6.6.0.tar.md5
I downloaded openrecovcery-twrp-2.6.0.0-hercules.tar
However, in Odin it still wont flash the phone (I closed all Kies processes beforehand).
This is all that happens - just hangs here...
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
kj2112 said:
Forget the other thread you found. That's not our phone and anything there that you flash could brick your phone!!
Sent from my cell phone telephone
Click to expand...
Click to collapse
I wasnt going to use the files from the other thread, I just assumed I could try this procedure once I got the correct files for the SGH-T989D:
Recovering a soft bricked phone
1) Grab the Recovery Package, and you'll see a bunch of .tar files. Take a look at the names. You'll see CODE, MODEM, CSC and .PIT. Put each one in its place.
2) Turn off your phone. Enter Download mode by presing Volume Down + Home + Power button.
3) Plug in your phone. It will show you, in a yellow box in ODIN, ID:COMx (x being the number displayed, sometimes displays 7, sometimes displays 9)
Now here, take a breath
First try flashing WITHOUT the .PIT and re-partition. And only if it DOESN'T WORK OR FIX then you flash with the .PIT and Re-Partition ticked.
4) Once ready and done all your prayers, press Start. Wait patiently. It usually takes 5 minutes to flash.
Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
You deserve some cake afterwards, and some rest
Now, if your problem is the NAND rw coruption, and wasn't fixed by the above fix, then follow these steps :
5) Download the Kernel. Flash it in PDA. Without ticking Re-Partitioning
6) Successful? Nice, hope is still present.
7) Flash the recovery package, following steps 1-4 This should fix your issue. If it does not, then :
WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues
11) After you have recovered your phone, I advise you to have your phone completely up to date by browsing and downloading the firmware for your version through SamMobile!
fruzmatik said:
I wasnt going to use the files from the other thread, I just assumed I could try this procedure once I got the correct files for the SGH-T989D:
Recovering a soft bricked phone
1) Grab the Recovery Package, and you'll see a bunch of .tar files. Take a look at the names. You'll see CODE, MODEM, CSC and .PIT. Put each one in its place.
2) Turn off your phone. Enter Download mode by presing Volume Down + Home + Power button.
3) Plug in your phone. It will show you, in a yellow box in ODIN, ID:COMx (x being the number displayed, sometimes displays 7, sometimes displays 9)
Now here, take a breath
First try flashing WITHOUT the .PIT and re-partition. And only if it DOESN'T WORK OR FIX then you flash with the .PIT and Re-Partition ticked.
4) Once ready and done all your prayers, press Start. Wait patiently. It usually takes 5 minutes to flash.
Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
You deserve some cake afterwards, and some rest
Now, if your problem is the NAND rw coruption, and wasn't fixed by the above fix, then follow these steps :
5) Download the Kernel. Flash it in PDA. Without ticking Re-Partitioning
6) Successful? Nice, hope is still present.
7) Flash the recovery package, following steps 1-4 This should fix your issue. If it does not, then :
WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues
11) After you have recovered your phone, I advise you to have your phone completely up to date by browsing and downloading the firmware for your version through SamMobile!
Click to expand...
Click to collapse
Make sure u have the stock USB cord, and remove kies totally from ur PC, even if u think its not running it still may interfere with Odin, do not, do not touch anything on Odin besides PDA, and as long as u download the recovery tar file from the link I gave u, have the factory cable, and are in Odin it will work, try diff com ports on ur PC, mine likes com5 urs may be different, I had the exact same issue and freaked out like I assume u did and this was how I fixed it, u do not have a soft brick, u have a firmware malfunction, the guide for soft brick won't help u, try twrp 2.4, that's the one that fixed mine, if u need help pm me or hangouts an I'll walk u through it step by step...
Sent from my SGH-T989 using xda premium
soupysoup said:
Make sure u have the stock USB cord, and remove kies totally from ur PC, even if u think its not running it still may interfere with Odin, do not, do not touch anything on Odin besides PDA, and as long as u download the recovery tar file from the link I gave u, have the factory cable, and are in Odin it will work, try diff com ports on ur PC, mine likes com5 urs may be different, I had the exact same issue and freaked out like I assume u did and this was how I fixed it, u do not have a soft brick, u have a firmware malfunction, the guide for soft brick won't help u, try twrp 2.4, that's the one that fixed mine, if u need help pm me or hangouts an I'll walk u through it step by step...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thanks! Switched to a different computer and had no issues flashing.
fruzmatik said:
Thanks! Switched to a different computer and had no issues flashing.
Click to expand...
Click to collapse
Glad I could help, sometimes even if u think kies isn't affecting odin it just might be, happy I could be of assist, hit that thanks button if u like lol
Sent from my SGH-T989 using xda premium
I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!
No recovery stuck on bootloop
im having the same issue could you post that dropbox link again
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?
louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse
hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help
yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).
Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it
I have the galaxy m919, and had a bad flash yesterday. My phone is now softbricked, and I am unsuccessful in fixing it.
I have run ODIN with a PDA file and it did not fix the problem. I am pretty sure I also need a PIT file to load. I thought I had one saved from when I originally got my phone and decided to root it and put the Infamous rom on it, but can't find it for the hell of me.
All attempts to search for the files online just gives me .tar files.
Any suggestions?
If I was soft bricked I would flash the stock img. When you say bad flash I assume the process was interrupted. Go here http://forum.xda-developers.com/showthread.php?t=2336392 and download the stock ROM open Odin and select PDA and find the stock MDL tar file and select it, then put your phone in download mode by pushing (volume down+home and power) then plug it in you your PC. Make sure the com window lights up and click start. Let the phone reboot and then re-root or do what you wish. I hope this helps. Good luck
Sent from my SGH-M919 using xda app-developers app
Thank you! I wiped it in recovery, and it fires up just fine now on the stock rom I installed.