[Q] can't acess bootloader but directly acess to cwm recovery - HTC One V

hi , first of all , sorry for my bad english
im have bought htc one v last week
so last night i tried to root and install custom rom
after i unlock the bootloader and rooting the device from this thread http://forum.xda-developers.com/showthread.php?t=1598964
then im choosing the custom room made by shubhamchamaria (thanks ) at http://forum.xda-developers.com/showthread.php?t=1640995
before i flash the room , my device still can access the boot loader
after flash the boot.img
then im entering the cwm recovery . then im installing the custom rom ,
so i did the reboot process
after the reboot process , it stuck at htc one logo (bricked?)
so i turn off the phone , turn off while pressing the volume down , it didnt enter the bootloader , but directly enter the cwm v5 recovery
so it bricked ? or another issue?
im downloading the stock rom right now
fyi ,
in the cwm recovery , ive format the data , cache partition and dalvik cache
thanks for the help

After you flashed the boot.img, did you do the "fastboot erase cache" ?
Not sure whether the boot.img that you have is secured or insecured, you can try this:
in CWM recovery, connect the usb cable to PC.
then go to your adb folder, in command prompt:
adb devices
if your device is listed, then the adb works
adb reboot bootloader
if it works
go to fastboot folder, in command prompt
fastboot erase cache
fastboot reboot-bootloader

Related

[Q] HTC One X Possibly Bricked

Hi all,
I think my friend and i bricked his phone last night.
Its the HTC one x and we used the Hasoon2000 method. I think the problem was the perm root part of the software said unable to connect to device.
I searched around and someone said to flash supersu and that should do it. However after flashing that we did a backup of the phone in clockwork recovery.
We then tried flashing the viperX rom which we did on another one X and worked fine, it got to 1% and restarted. It then stuck at the quietly brilliant page.
We can't get it to boot into recovery but can get it to go to the bootloader. We tried to do the fastboot command from the PC to erase fastboot cache but it couldnt connect to the device.
I have read this thread http://forum.xda-developers.com/showthread.php?t=1764421 and but it is about the AT&T version, what recovery image would i need?
Also how can i tell if it is hard bricked or soft bricked? As i'm worried it could be hard bricked cause i couldnt erase the fastboot cache.
Any help is appreciated, and sorry if this is answered somewhere else but i couldnt see an answer.
Bit more bootloader info:
Unlocked
S-On
Hboot 1.39.0000
If possible i'd like to help my friend finish rooting it but if its easier put it back to normal.
Again thanks if anyone can help me.
What does the bootloader say, EVITA or ENDEAVORU ?
It says endeavoru
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Mr Hofs said:
Then stay away from the HTC one XL forum, its a different phone !!!
Do you have the HTC drivers installed and a folder on the pc with the fastboot files ?
Place these files in a folder like this
http://db.tt/ldx3qOOU
C:\fastboot\files i gave you
Then put the phone in the bootloader and open a command prompt inside the fastboot folder on the pc and type
Fastboot devices
If a serial comes up we are good to go !
Click to expand...
Click to collapse
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
DannyBLOL said:
Well we installed the HTC drivers with the Hasoon tool so yes. Just meeting my friend now so i'll put these files in a folder and try that straight away.
Thanks, will let you know shortly.
Click to expand...
Click to collapse
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
DannyBLOL said:
Just connected it to my laptop and the pc said fastboot drivers installed and made the noise of a device connecting and disconnecting.
Haven't tried what you said yet as it said battery is too low on the bootloader. I've now plugged it in a plug socket and have it on the htc quietly brilliant screen. I take it this should still charge it?
Click to expand...
Click to collapse
Is it possible for you to turn the phone off?
IF so it should charge a bit quicker that way
Also just to clarify, how did you try to install Viper X on your phone?
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
No, if i go into bootloader and fastboot then power down it turns itself back on if its plugged in.
Mr Hofs said:
Hmm no, if its bootlooping then yes. Is the bootloader unkocked and do you have a custom recovery installed yet ?
In case you have a custom recovery installed put the phone in the recovery it will charge the batt in there .....
Otherwise put the phone in the bootloader and run this file from within the fastboot folder
http://db.tt/aLqeTpPO
It will continuously reboot the phone and charge it little by little, leave it like this for an hour or so.
Click to expand...
Click to collapse
The bootloader says unlocked, and we had CWM recovery installed it no longer loads up, it just reboots itself.
I'm confused by what you mean, what command would i use to run that file from the fastboot folder and after doing that do you mean i should leave it charging from the laptop?
Link to image of the bootloader if this helps - http://imgbin.org/index.php?page=image&id=11217
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again.
Edit : I see fastboot usb in the bootloader that's good ! :thumbup:
We need to get the batt charged so we can reflash the recovery, that will probably solve it all.
Mr Hofs said:
Just connect the phone to the pc and put the phone in the bootloader then execute the .bat file from the fastboot folder (download it and move it in there)
It should start rebooting the phone over and over again
Click to expand...
Click to collapse
Ok this is working. It doesn't say about low battery anymore on the bootloader. But ill leave it charging for a bit. What is my next step?
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Ignore me Mr Hoffs beat me to it
Mr Hofs said:
Next step is to reflash the recovery, download this one
http://db.tt/Krlm4dPs
Rename it to recovery.img and Copy the file in the fastboot folder. Put the phone in the bootloader again and flash the recovery
All these commands are executed from the command prompt inside the fastboot folder.
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery by pressing hboot one time (confirm with powerbutton) then press recovery
Click to expand...
Click to collapse
YES! That has worked, we are in recovery. What can i do now? Should i try flashing ViperX or is the phone not permarooted?
Last time i tried to do permroot with the Hasoon2000 tool. That didnt work and i just flashed superSU, i think i must be missing something.
Thanks so much for your help!
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Mr Hofs said:
If you do this, you will be good. Maybe you van skip some steps because you already did them before but I mention them anyway
Download the viper x JB rom, open it with an unpack program and copy the boot.img and place it in the fastboot folder. Copy the rom.zip to the phone (mount as usb drive in the mounts & storage part of the recovery)
Now put the phone back in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot img
Fastboot erase cache
Enter the recovery again and do a full wipe , also wipe the dalvik cache under the advanced tab. Then install the rom.zip with the
Install zip from sdcard menu !
Install the viper and choose in the aroma installer of the rom FULL WIPE and the question you get about the custom kernel you answer with NO !
Don't worry about root, the rom is standard rooted
Good to go mate
Click to expand...
Click to collapse
Thanks so much mate!
Worked flawlessly. Seriously can't thank you enough!
Nice :thumbup:
Have fun with it !
CASE CLOSED !

[Q] HOX stuck on "quietly brilliant"

Hi I have a India "HTC__038" CID HTC One X. I tried to install CM10.1 so these are the steps i did before I got stuck.
1. unlocked bootloader from HTC.
2. flashed cm10.1 nightly and gapps
unfortunately since i did not backup my ROM i am struggling to get my phone working. Please help me. Super crazed out.
You need to flash the boot.img file, and you need to install the vendors file too !
Make a full wipe in the recovery and install cm10.1 then the gapps and then the vendors
http://db.tt/u5FF3jgi
Then you boot into the bootloader
Adb reboot bootloader (from the commandprompt)
Then flash the boot.img file, its in the cm10.1.zip file
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
hi i am a newbie so please can we do this one step at a time please.
What recovery did you flash ? Type and version number ?
Edit : Ow and now did you flash the custom recovery ?
i did not have a recovery when i flashed it
You cant install a new rom without a custom recovery !
The basic steps are :
Unlock the bootloader
Flash a custom recovery
Make a full wipe
Install the new rom inside the custom recovery
Flash the boot.img with fastboot commands from the pc to the phone
You didn't do your homework mate
Go in here
http://forum.xda-developers.com/showthread.php?t=1832891
There are tutorials on Adb/fastboot commands ....
thats the problem. the ROM is deleted and I have no way of adding any ROM now. can we chat thru IM this is taking too long.
thank you. i have my phone now unlocked but i am trying to flash the "boot.img" (from CM10.1) and then going to recovery->backup and restore but still this does not do anything
Did you flash a custom recovery ? Flash this one
http://db.tt/Krlm4dPs
Put it in the fastboot folder on the pc and Renske it to recovery.img
Put the phone in the bootloader and open a command window inside the fastboot folder. Hold shift + right mouse click then open command window here
Then you type :
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then enter the recovery and go to mounts and storage - mount as usb diskdrive/mass storage. Copy the cm10.1, gapps and the vendors file there
Then perform a full wipe
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache,data,system
Then do what i wrote my first reply
Ps installing the rom is done with the option :
Install zip from sdcard - choose zip from sdcard.
now how do i copy CM10.1, Gapps and vendor files from computer to phone. I am not able to see the phone on my disk drive.
Mount it as a usb mass storage device in the mounts and storage menu inside the custom recovery
WOW AWESOME. got it installed now. YOU SAVED MY DAY(/NIGHT). now time to spend time and get my phone back to how it was before. THANK YOU. THANK YOU.
Read this thread
http://forum.xda-developers.com/showthread.php?t=1975140
Or do the fastboot command
Fastboot getvar version-main
Post the number please

NEED HELP !!! OPPO FIND 7 stuck on boot with logo only

Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT
kevzwenhao said:
Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT
Click to expand...
Click to collapse
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck
roi_xordo said:
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck
Click to expand...
Click to collapse
Hi, is it wrong to wipe the system partition before flashing a custom rom? Coming from stock ColorOS, I've wiped all dalvik cache, cache, system, and data, then flash a custom rom but it ended up getting endless bootanimation unable to boot into the custom rom.
I did unlock the bootloader with the adb code, flashing a temporary recovery was a success but endless bootanimation happened after flashing a custom rom. The custom rom was successfully installed according to TWRP's log.
Pls advice, thanks in advanced
P.s: I was referring to my friend's device X9076
Hi, i tried in the past some roms than not works, phone stuck in boot animation. The roms wich works for me and my x9076 with r63419 are:
Omnirom (6 or 5) THE BEST
Project Spectrum
Cyanogen 13 (modified version for new panel: http://community.oppo.com/en/forum.php?mod=viewthread&tid=44907&extra=)
Miui
If you install CM13, you need to flash unified partition script for CM13 (you can find it in the same post from the forum Oppo Community)
For the other roms i dont need to flash anything else than rom and gapps.
Now i give a chance to CM13, but i think that i will get back to Omni if developers dont fix the mobile radio issue.
Cheers
Can anyone guide me please, 1st time i bought MTK phone Oppo F7, its update automatically but suddenly dead like stuck on logo and restarting again and again, i didnt ever flash MTK phone, neither i have any android tool like MRT dongle or any other flash USB or Box... Kindly guide me step by step how to flash with which tool only USB cable and PC... Thanks in advance

I killed my watch

1 week ago i bought in china the watch .i dont know Chinese and i was just there for business so i thought that when i will connect to my phone it will automatically change to English but that never happend . So i tried several threads in xda to understand how it is working and what can i do . And i followed the thread that says to flash another system img recovery and boot . So i first unlocked the bootloader and booted on it and i flash the images and tried to reboot to recovery but already the recovey option in the bootloader is missing i get only shutdown , reboot , reboot bootloader , so i thought that i haven't correct flash the recovery.img so i flash it again but still the same . I also tried twrp recoveries and other recoveries that i found in other threads but still the same i can only boot to bootloader and nothing else . Has any one had the same problem and fixed it ? And if not were can i find the stock chinese firmware to try to flash it maybe it will come back to life .. thanks in advance
Have you tried using adb and fastboot commands?
Ex::
adb reboot-bootloader (for bootloader)
adb push xxxxxxx.img or xxxxxxx.zip /sdcard/ (for transfer files to sdcard)
adb push recovery.img /sdcard/ (for transfer yours custom recovery - i recommend the latest 3.1.1.0 because the others have some bugs)
after that boot to recovery: fastboot boot recovery.img (personally i never tried to flash the recovery but just boot it, baut it works)
from recovery just install the files that you have transferred earlier to sdcard (oh, and prior that erase everything except internal memory, or that toot but you have to transfer your files again)
ex: install zip (i recommend negalite) after that install kernel (negalite too) and install performance or battery booster .
Oh, after kernel install, it will automatically reboot, so you have to repeat the process to install the booster.
Reboot.
p.s. - the reboot process take LOOONG, so wait patiently.
Hope i could help you.
Currently my watch is stuck on AW boot logo from Skin Sturgeon kernel, how can I boot back to stock to reflash? Am unable to access adb as it doesn't seem to get that far in the boot process.
Enter bootloader
spicerackk said:
Currently my watch is stuck on AW boot logo from Skin Sturgeon kernel, how can I boot back to stock to reflash? Am unable to access adb as it doesn't seem to get that far in the boot process.
Click to expand...
Click to collapse
If you want to enter the bootloader, to choose, where u want to reboot and you are stuck:
Hold the button on your watch...hold it, till you feel the first vibration after the restart at the HUAWEI-Logo. Then, press the button once again (Its just timing).
It should show you your bootloader and you can restart into recovery or wherever you want.
Hope I could help :highfive:

No OS is installed. Moreover recovery cannot be accessed. Nor can flash it via adb.

Previously I was using Ressurection Remix treble rom which is based on android 9 pie. I went to TWRP and wiped the OS. Then I tried to install a new rom called Dot OS. But it showed error 7. So I flashed Vendortofactory zip within twrp and without rebooting again into TWRP I flashed a new TWRP image within TWRP by selecting Recovery mode. After that I cant boot into TWRP and as already my OS is gone I also cannot boot into any system. Moreover my device is not getting detected in my PC. I cannot install TWRP by writing commands in cmd, while the phone is in fastboot mode as the device is not getting detected in my pc. Really it is urgent. I will be glad if someone helps me. Thanks in advance.
What is the present booted state of your device? Are you in twrp, or bootloader. Most of the time you can keep on pressing the power button. When it boots into a message about unlocked bootloader, press volume button to select recovery and it will boot into twrp
You should be able to boot in fastboot mode without recovery nor os, maybe your drivers are not working on windows? Try different usb ports, check if the display says "bootloader" or something. If nothing works try the usb shunt, this device is literally 'unbrickable' if it's working properly.
Watch this video(https://www.youtube.com/watch?v=DexLELi04XY) and then you will be able to detect your phone in your pc in qcom 9008 mode , then use qfil to flash ZUI firmware ,there are plenty of tutorials on the internet for that ,then follow the proper procedure mentioned in DotOs thread for flashing the new rom .
Hope it helped .
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
yashpatel1221 said:
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
Click to expand...
Click to collapse
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
sanjay.2704 said:
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
Click to expand...
Click to collapse
I don't understand what you are talking about as i say i am not some kind of technical expert i am here help regarding this i faced similar situation where i am not able to enter into recovery and also not able to enter into the os and when i restart the phone it automatically boot into fast boot mode what ever option i select and i solved my problem by this method

Categories

Resources