i tried to relock the bootloader just now but it keeps on rebooting to hboot so i just unlock again and it booted fine albeit being factory reset.
so the question is, after i fastboot oem lock , what should i do to reboot it normally instead of reboot to hboot?
do i need to download RUU exe file and execute it?
i also re flash original recovery since i don't feel like using custom ROM for the time being, i just want to wait for official OTA.
If you want to go back totally stock, then yes just run the RUU again.
M.
It will not boot if you have custom rom installed and oem locked. Hence it keeps rebooting into bootloader with a some warning on the top.
Unlock it again to resume the boot and lose all the settings or run a ruu as suggested before me.
Sent from my iPad using Tapatalk HD
beware if you have a 1.28 based rom (or updated OTA) i dont think a 1.26 based RUU will work. I didnt for me, i had to flash CWM recovery again and a .zip with 1.28.
so we need a new RUU to get back to stock if we have updated hboot.
PREVIOUS STATE :i had previously rooted primou and was running ignorance rom and TWRP 2.5.8. also have S-ON.
CURRENT STATE : cannot boot into rom or recovery but i can see fastboot usb.
i have tried unlocking the bootloader with "Unlock_code.bin" file ,but nothing happens.
I have locked bootloader without stock recovery. and im stuck at boot loader, the only hope i can see is FASTBOOT USB. anyone plz help
More information please. What exactly happens when you reboot into recovery or system? Try unlocking the bootloader using some guide here and flash a new recovery.
https://m.reddit.com/r/lgg4/comments/3jn2vw/eli5_flashify_and_twrp_manager/
I'm seeing comments all over the web that you don't need to unlock your bootloader to flash a recovery. Is that true and can anyone confirm this. I'd like to just flash a recovery on my device and make a stock backup all without unlocking the bootloader.
Is it possible to have a working phone without a recovery installed ?
Unlocked bootloader, flashed twrp 3.0.1.0, phone wouldn't boot into recovery.
Relocked bootloader cause phone is s-on, ran 401 ruu but can't get into stock recovery but otherwise phone works ok
:banghead:
There is always a recovery installed. Either the stock one or the custom one. What does it do when you go to the recovery?
10rdan said:
Is it possible to have a working phone without a recovery installed ?
Unlocked bootloader, flashed twrp 3.0.1.0, phone wouldn't boot into recovery.
Relocked bootloader cause phone is s-on, ran 401 ruu but can't get into stock recovery but otherwise phone works ok
:banghead:
Click to expand...
Click to collapse
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
jollywhitefoot said:
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
Click to expand...
Click to collapse
With s-on you need to relock the bootloader to use official signed ruu files. When he flashed the ruu he could be seeing the exclamation mark that is normal as a warning before entering the stock recovery for which you need to push a volume and power button combo (don't know them heads up)
A possibility is to clear the cache and try to enter again (as this was a thingy on older HTC devices) or indeed as suggested at least to use the latest twrp available
Mr Hofs said:
With s-on you need to relock the bootloader to use official signed ruu files. When he flashed the ruu he could be seeing the exclamation mark that is normal as a warning before entering the stock recovery for which you need to push a volume and power button combo (don't know them heads up)
A possibility is to clear the cache and try to enter again (as this was a thingy on older HTC devices) or indeed as suggested at least to use the latest twrp available
Click to expand...
Click to collapse
It doesn't get as far as red exclamation mark, that's what I was waiting for. I'll try the newer version of twrp tomorrow after I've unlocked bootloader again. Do you think the same unlock code will work again?
10rdan said:
It doesn't get as far as red exclamation mark, that's what I was waiting for. I'll try the newer version of twrp tomorrow after I've unlocked bootloader again. Do you think the same unlock code will work again?
Click to expand...
Click to collapse
Yes i think it does work again. But that's a try and find out. There is always the possibility i could be wrong.
Edit :
This is why i love s-off....no more relocking / unlocking the BL with also an increased chance of bricks. The BL isn't made to be relocked and unlocked over and over.
Mr Hofs said:
With s-on you need to relock the bootloader to use official signed ruu files.
Click to expand...
Click to collapse
Sorry, but I believe this is misinformation, possibly residual to older HTC devices. I've heard this going back to the M7.
You need to be s-off to flash in download mode, but s-on can flash signed firmware and ruu's in RUU mode. I'm s-off so I can't test at the moment, but I'm about 99% that my information is correct.
S-on, you can only flash same or newer, though. You can't flash older firmware.
See post 19 here:
http://forum.xda-developers.com/htc-10/how-to/unlocked-official-ruu-t3378540/page2
I'm 100% that you can flash signed firmware package in ruu mode with bootloader unlocked and s-on.
jollywhitefoot said:
Sorry, but I believe this is misinformation, possibly residual to older HTC devices. I've heard this going back to the M7.
You need to be s-off to flash in download mode, but s-on can flash signed firmware and ruu's in RUU mode. I'm s-off so I can't test at the moment, but I'm about 99% that my information is correct.
S-on, you can only flash same or newer, though. You can't flash older firmware.
See post 19 here:
http://forum.xda-developers.com/htc-10/how-to/unlocked-official-ruu-t3378540/page2
I'm 100% that you can flash signed firmware package in ruu mode with bootloader unlocked and s-on.
Click to expand...
Click to collapse
That's new to me. Hopefully it isn't just tied to the developers edition then.
Thanks for the information
Mr Hofs said:
This is why i love s-off....no more relocking / unlocking the BL with also an increased chance of bricks. The BL isn't made to be relocked and unlocked over and over.
Click to expand...
Click to collapse
I'll bare that in mind, will unlock tomorrow again and try newer twrp. Only reason I relocked was to run ruu to get phone running again.
jollywhitefoot said:
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
Click to expand...
Click to collapse
Where can I find 3.0.2.2, can only see 3.0.2.0 on twrp site?
Cheers
Edit.... Found it. ?
@jollywhitefoot
I've got stock recovery back on phone. Can you think of any reason, other than old version, as to why twrp wouldn't boot after flashing it ?
Will try again tomorrow.
10rdan said:
@jollywhitefoot
I've got stock recovery back on phone. Can you think of any reason, other than old version, as to why twrp wouldn't boot after flashing it ?
Will try again tomorrow.
Click to expand...
Click to collapse
I'm not exactly sure, but up until 3.0.2.2 Captain Throwback didn't even have the device and was working blind. I know he was trying different things to make it compatible with different variants, too, so in my mind that was a test build. I'm not sure why they have it on the downloads page. For me, I always download it from the download section of the twrp thread.
I have pixel 3a xl with bootloader unlocked, no root and stock kernel, its possible relock bootloader?
I always suggest flashing the Google factory image (not the OTA images), including the full factory reset before relocking the bootloader.
But yes, if you are 1000% sure your entire system is stock, then you can relock the bootloader.
I wouldn't do it... If anything ever gets truly fubared you will be glad it's unlocked.
If you lock it you lock out a few additional possibilities to recover your phone.
sic0048 said:
I always suggest flashing the Google factory image (not the OTA images), including the full factory reset before relocking the bootloader.
But yes, if you are 1000% sure your entire system is stock, then you can relock the bootloader.
Click to expand...
Click to collapse
Thanks, only need use the comand fastboot oem lock?