Develop Bugs

[Q] Get 'Unauthorized' when trying to make calls, will not OTA

I am using the Jiminy V Rom on Cricket
I am unable to OTA or make calls on the Cricket network. when I try and make a call I get 'Unauthorized' and when I try to OTA (*228) the system says 'unable' at the very beginning. I have done many EVO's to cricket before, and I have checked and double checked all my PST settings, my MEID/MIN/MDN/PRL particularly.
Even when OTA doesnt work , I can always get voice/text working on virtually any other phone by manually programming the MDN/MIN/Home SID & PRL.
My cricket home SID is 4923 & I am using PRL 32200
I have even loaded a working evo's PST settings into this phone (via QPST, read from one phone, write to another), and get same results even after making sure the MDN/MIN & MEID are correct.
The symptoms are exactly the same as if my MEID is not in the cricket system, yet I have triple checked them (and I had someone else program another phone with my MEID and that phone OTA'd and made calls on Cricket with no problem).
Some other data for consideration Android 2.1, build Baseband 2.15.00……007.25 kernel 2.6., Radio 2.05.00.06.10, HBOOT 0.79.0000 SHIP S-OFF
I have also tried factory builds 2.2 (3.26.651.6) and 2.1, (Baseband 2.05.00.06.10,Build 1.41.651.1) with same result. Note: they did not change the PST.
Is there a factory build which will put everything back to Sprint or should I consider updating the HBoot and /or Radio?, I assume the programming for the OTA is done in the Radio?
I am stumped.

Bump, If anybody can help me with this, its been driving me up the wall for two weeks now.,

Have you tried flashing an RUU and updating everything from there? If it isn't the MEID then it might just be your phone having a glitch. Flash it using RUU and let me know.

how do you reset PST/NAM (SPC,MIN,MDN, Etc) to factory?
I have tried RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe , hboot goes from 0.92 to 0.79, radio from 2.15 to 1.39.00.04.26, and android from 2.2 to 2.1.
But the pst/nam settings remain unchanged, mdn,min, sip, nai, etc are all cricket. even the SPC is still unlocked at 000000. ANd the S-OFF flag is off, Shouldnt the RUU's re-root the phone?
Is there an alternate way to run the RUU, I have tried putting the phone in HBOOT usb mode, then run the RUU but with three different batteries it tells me they are too low (under 30%).
Should I be in Hboot mode to run RUU? (I have been running it from the PC with the phone booted up.

To answer a couple of my own questions, none of the RUU's reset the EPST whether they where loaded from the PC via the .exe method or from the SD card PB31IMG method.
I found a reference to ##786# and found that yes that does reset the EPST (including the SPC) back to factory.
So I figured maybe the problem would be solved, so I updated PST for cricket (MDN,MIN,SID,PRL) and tried again, still no OTA and still 'Unauthoriized; when I try to make calls.
I am starting to believe I have a hardware problem, but how can most of the phone work and yet it have (apparently) problems transmitting MEID?

Seems like no interest here or everybody stumped. I am willing to pay some one to help me resolve this. contact to my email or post here, I will certainly let the forum know when I resolve this. Thanks

GDEMI said:
Seems like no interest here or everybody stumped. I am willing to pay some one to help me resolve this. contact to my email or post here, I will certainly let the forum know when I resolve this. Thanks
Click to expand...
Click to collapse
No need to pay, I forgot about this thread lol. I think you may be right that this is a hardware problem or glitch and I am actually stumped on how to help you. :|

some help here
hi...
im trying to flash my phone and make it to worj for cricket carrier and i do everything ....i think correct but when i try to make a call it ask me if i whant to make a collect phone or buy some kind of card .
i already try the qpst configuration twice and even try many plr to and no luck
righ now i have a 45713hybryd plr
and i use this
http://forum.xda-developers.com/showthread.php?t=934417
i even take to a cricket store to chek for the s/n numbers and the min and they say that everything looks ok but i can do anything on the phone
any ideas, and help
thank

Very dirrerent problem
paulinaoza said:
hi...
im trying to flash my phone and make it to worj for cricket carrier and i do everything ....i think correct but when i try to make a call it ask me if i whant to make a collect phone or buy some kind of card .
i already try the qpst configuration twice and even try many plr to and no luck
righ now i have a 45713hybryd plr
and i use this
http://forum.xda-developers.com/showthread.php?t=934417
i even take to a cricket store to chek for the s/n numbers and the min and they say that everything looks ok but i can do anything on the phone
any ideas, and help
thank
Click to expand...
Click to collapse
Your problem has different symptoms from mine (the threadstarter), it sounds like your prl is incorrect. If you have a correct prl & sid (these can vary for the market you are in , in Phoenix the SID is 4923 and I use the old nationwide non EVDO PRL of 1040) when you dial 611 you will get Cricket, regardless of your ESN/MEID being registered with Cricket, if this doesnt work do not go further. Find a PRL/SID that works (sometimes changing CDMA connect from Auto to Home only can help) . Also make sure MNC/MNC are set to 310/0. Country code/Carrier I think.
Once you get 611 to connect to Cricket, *228 (OTA) will connect to cricket, if It disconnects you before the music starts playing and says 'Sorry....' it is most likely your MEID is not registered correctly with Cricket. In Phoenix *228 always works on EVo's as long as SID/PRL/MEID are correct,
The message you are getting about a credit card required means you are connnecting to some other carriers network (usually Verizon) which is transferring you to someplace to allow you to make a call even though you are
"not authorized" on the network. Go back and check 611 & *228.*228 will load the correct prl for your area and rate plan, check after it runs to see what was loaded. It will also most likely overwrite EVDO settings including MIP, Sip, NAI, etc.
At this point your phone should work, talk & text.

I had the same problem and I look all over. I wanted to unroot and remove jimmy v rom. I was think that if i update to the new update that it will fix it self and i was right. First I had to remove the jimmy v rom, so i got ruu to update the htboot and that let me update to the new 2.3.3. It fix it self and f***ing A.

avillal87 said:
I had the same problem and I look all over. I wanted to unroot and remove jimmy v rom. I was think that if i update to the new update that it will fix it self and i was right. First I had to remove the jimmy v rom, so i got ruu to update the htboot and that let me update to the new 2.3.3. It fix it self and f***ing A.
Click to expand...
Click to collapse
Can you be more specificwhat you loaded and what versions of hboot where involved? I downgraded to 2.1 (with RUU) and hboot .79 and it did not resolve problem.

please help, No Data or MMS VM

Hi,
I need a little help if you dont mind. I'll get right to it.
I wasnt getting any mms on my marvelc so I did what I would have done on my old evo 3d, ##3282# then entered my msl. After that I selected data profile and restored it (which erased my data profile). On sprint network, after you do that then reboot the phone, it does hands free activation, this one doesnt do that. So I went to settings/about phone/activate phone. it went through the process and now I dont have data either, hehe, ya I know.
So I called VM and they did a 3g reconnect or something and it didnt work either. They were supposed to call me back but they didnt.
So after waiting an hour I decided they were'nt calling me back and I thought I could just RUU it back and I'd probably have my data profile back.
I got the VM/Sprint RUU from here http://www.filefactory.com/f/7b4aa0a541dcf00f/ and relocked my bootloader, then I went back to hboot and ran the RUU. It did most of the installing but stopped at hboot install and gave me an error about the hboot being a lower version and it wouldnt flash. I assume this is because I upgraded my hboot to htcdev unlock. So I'm thinking I need a newer RUU with the new hboot?
I also extracted the rom.zip from the RUU and renamed it to PG76IMG.zip and tried to flash it from hboot and it said my main version is lower, so it wouldnt go either. Do you have a lower main ver and do you know the commands to change it?
Or do you know the settings that I need to put in the data profile?
Thanks for the help.
Update. Figured out how to change the main version so I can run the RUU.
Update 2. RUU worked with the tool I used and now hboot is back to 1.06, without the relocked banner, very cool, that tool is awesome, thanks theq86. But unfortunately it didn't fix my data problem, it did give me my warranty back though

Bump for the night crew.
If anyone here has Virgin mobile us, could you please tell me a few things.
Please dial ##3282# (##data#) and select edit mode, itll ask for your password (msl). If you dont have it, you can get it with "msl reader" from the market, its free. Enter your msl and then choose edit mode.
This is what I need, PLEASE.
Active profile <--- How many
User name <--- I dont need your user name I just need to know what goes here.
SPI MN-HA <---?
SPI MN-AAA <---?
Reverse tunnel preferred <--- Enable or Disable?
Home IP Address <---?
Primary Home Agent <---?
Second Home Agent <---?
HA Shared Secret <---?
AAA Shared Secret <---?
I dont think any of this information is a secret but you can pm it to me if you dont want to post it.
Any information will help at this point. Thanks.

hi
may sound a bit obvious but are you sure you have turned on mobile data??
and if not you may need to set up the correct apn (access point name) if you dont have it drop into your local service providers shop and ask them to fill it in for you
my wildfire (buzz) has a lot of issues with incorrect apn settings when i switch between roms. and if you dont have the correct setting your mobile data will not work. so give that a bash if you havent already.
good luck

heavy_metal_man said:
hi
may sound a bit obvious but are you sure you have turned on mobile data??
and if not you may need to set up the correct apn (access point name) if you dont have it drop into your local service providers shop and ask them to fill it in for you
my wildfire (buzz) has a lot of issues with incorrect apn settings when i switch between roms. and if you dont have the correct setting your mobile data will not work. so give that a bash if you havent already.
good luck
Click to expand...
Click to collapse
Thanks for the reply, I wish that was my problem, but its not. When I went to edit mode after typing ##data# I chose to restore and that zero'd out all my data profile settings (smart huh). After talking to the 3rd tier of tech support they said that they needed to send my case to HQ. He said he'd done all he could. I just need those settings back. I asked him if he knew the AAA shared secret and he didn't know what I was talking about. The mobile data setting says no connection available when it is checked.

brutal man. sorry hopefully someone else can help out

Sorry to resurrect this thread but I just wanted to update it incase someone else has the same issue I did.
After about 2 weeks and about 50 virgin mobile reps later, they finally told me that my phone cannot be fixed. I told them exactly what happened and they still thought its because of a bad phone, whatever, I'm not gonna argue. I ran an ruu, did multiple factory resets, did a ## code to activate the phone, they reactivated the phone, nothing restored my data profile. I thought for sure that the ruu would do it but I guess the ruu is just HTC software and what I need is virgin mobile data.
Lesson learned, do not erase your data profile or you're screwed. I think theres a way to back that stuff up and I'm gonna do some research to figure it out. I should have my new wildfire s in about 3 days. I know that someone woulda helped if they could have so thanks anyway.

Sent from my SPH-D710 using Tapatalk 2

[SOLVED] A pre-rooted Dinc: Upgrade Questions

So I have what may be an obvious question, but it's not one which I have run into before. (my previous device was a Droid 2 which used a fairly generic boot loader)
I got my phone used off Ebay about 3 weeks ago. When I did, I assumed it was a stock Dinc, and so collected everything that I would need to mod it. Low and behold when it arrived and I charged it up, it had already been rooted, S-offed, and had CWM on it (the auction had not mentioned it being a rooted phone) So it took a sum total of five minutes to flash a new rom in.
Now, on further digging around, I find it has an old radio on it, (2.15.00.07.28) and also still has the old owner's phone number in it. Now, a few forum posts I have read in the past few weeks have indicated that installing a newer radio rom may improve some of the functions such as the light metering of the camera... but I have also seen that doing so may bork the S-off as this is stored in the radio rom?
What effect would it have if I put a radio rom on this already rooted and now rommed phone (Albinoman's JBb3). Should I just do it, or should I return the phone to totally stock prior to upgrading the radio software? And also, is there a way to erase the old owner's phone number from the My Phone Number field since this is now a wifi-only device and i'd rather the OS not send that info out when it's not correct.
Or am I just completely off base and don't need to worry about the radio at all?
Thanks for any help in advance!

You dont have to return to stock to flash the radio.
With radios I think it depends on your area. One radio that works great for someone may be terrible for someone else. The general consensus is that updated/newer software would improve the experience but I think with radios it varies. If you do change the radio make a backup and check the md5. Latest dinc radio is in my SIG.
Sent from my ADR6300 using xda premium

Changing your radio will not mess up s-off or anything else as long as you check the md5 and take the proper precautions. Also changing the radio will not help the camera or anything else besides your cell signal.
S-off is stored deeper than the radio, but tools like unrevoked use certain versions of radios to gain access to this setting and modify it.
No need to revert to stock, and there is NEVER a need to go s-on unless your selling the phone or sending it to HTC. I see so many people say they went s-on to fix some kind of issue, or to upgrade and then the phone messes up durring the proccess and it makes it much harder to fix.
You can remove the number by accessing epst. Dial ##778# hit edit mode and type six zeros as the password. Go to each menu option editing the info you dont want there. Replace numbers with an equal ammountvof zeros (147-237-9900 = 000-000-0000) When done hit menu and commit changes.
You can get all the different radios here. http://dinc.does-it.net/Radios/

cmlusco said:
Changing your radio will not mess up s-off or anything else as long as you check the md5 and take the proper precautions. Also changing the radio will not help the camera or anything else besides your cell signal.
S-off is stored deeper than the radio, but tools like unrevoked use certain versions of radios to gain access to this setting and modify it.
No need to revert to stock, and there is NEVER a need to go s-on unless your selling the phone or sending it to HTC. I see so many people say they went s-on to fix some kind of issue, or to upgrade and then the phone messes up durring the proccess and it makes it much harder to fix.
You can remove the number by accessing epst. Dial ##778# hit edit mode and type six zeros as the password. Go to each menu option editing the info you dont want there. Replace numbers with an equal ammountvof zeros (147-237-9900 = 000-000-0000) When done hit menu and commit changes.
You can get all the different radios here. http://dinc.does-it.net/Radios/
Click to expand...
Click to collapse
Thanks for the answers, that filled in a lot of blanks for me I Figured I didn't need to go S-on, but I didn't know if, like on my old Droid 2, there were certain situations where I'd have to revert to stock before flashing.
UPDATE, I flashed the radio yesterday to 2.15 with no problems. Got a tiny bump in my battery (which tells me the old radio was working harder than it had to)
##778# didn't work for me though, instead it rang up "welcome to verizon" and wanted me to wait to talk to an operator about placing my call.

also tried without the third hash, also tried ##3424 and ##775... all with variations on the same result; either my phone is not in service, or my phone number is inactive... none of them accessed the menu system.
::edit::
I also tried variations on #program# and #data# with no luck,and tried turning off all the radios I could get at.
Any further ideas or steps I may be missing would be greatly appreciated. I also put in an ask over on the rom forum.

eoraptor said:
also tried without the third hash, also tried ##3424 and ##775... all with variations on the same result; either my phone is not in service, or my phone number is inactive... none of them accessed the menu system.
::edit::
I also tried variations on #program# and #data# with no luck,and tried turning off all the radios I could get at.
Any further ideas or steps I may be missing would be greatly appreciated. I also put in an ask over on the rom forum.
Click to expand...
Click to collapse
Have you tried *#*#data#*#* or *#*#program#*#*

Yeah, tried those as well... but got my answer, apparently only Sense-based Roms can use ESPT, and since I'm running Albinoman's JB rom, no go for me unless I flash over to a sense-rom, make the changes, then flash back. Might be a project for tomorrow while the laundry is going... or perhaps I'll wait for beta four of the JB Rom, flash to sense, do the tweak, then flash to the new beta.
but I'm getting there. in the last week I have inserted new kernels, new radios, And troubleshot this problem, plus dialed in my Nova interface tighter and tighter, in addition to the font toying and so on I've been doing. who knows, sooner or later I might even try to compile something.
thanks for the assist though. Is much appreciated.

well, at the end of the day, I never did get EPST working. I tried several different sense roms, tried installing the APK and pushing it from ADK, the closest I got was to punch in ##788# and it would say "loading requested resource" and then, nothing.
so now I'm on to Release Candidate #2 of Albinoman's 4.1 Rom and will come back to the phone number issue later.

IMEI null, Service Mode Blank, Baseband Unknown

Hey all!
I have a Canadian S4 (SGH-M919V) from WIND Mobile that my friend gave to me, broken.
I have already tried just about everything I can think of, and everything I read online to repair it.
It has a NULL IMEI (as verified by doing *#06#), and when I enter the Service Mode menu via *#0011#, the menu screen comes up but is just black and blank. The Baseband version displays as "Unknown".
I have tried flashing a few different stock roms (via Odin) for that particular phone, and have even tried AOSP roms (via TWRP), to no avail.
I have followed guides for restoring a blank IMEI, however, all the methods I tried required a working Service Mode, which I do not have.
At this point I'm thinking the problem is either hardware, or, it needs to have the IMEI reset via the JTAG, and I don't have the stuff to do that.
Any suggestions would be greatly appreciated!
Thanks in advance!

ess.boyer said:
Hey all!
I have a Canadian S4 (SGH-M919V) from WIND Mobile that my friend gave to me, broken.
I have already tried just about everything I can think of, and everything I read online to repair it.
It has a NULL IMEI (as verified by doing *#06#), and when I enter the Service Mode menu via *#0011#, the menu screen comes up but is just black and blank. The Baseband version displays as "Unknown".
I have tried flashing a few different stock roms (via Odin) for that particular phone, and have even tried AOSP roms (via TWRP), to no avail.
I have followed guides for restoring a blank IMEI, however, all the methods I tried required a working Service Mode, which I do not have.
At this point I'm thinking the problem is either hardware, or, it needs to have the IMEI reset via the JTAG, and I don't have the stuff to do that.
Any suggestions would be greatly appreciated!
Thanks in advance!
Click to expand...
Click to collapse
Unfortunately you are going to have to get your information on fixing this elsewhere.
Discussion about changing the IMEI (even from 0 to a working value) are forbidden on XDA as making changes to an IMEI is illegal in most places in the world. And people use that info to make it easier to steal phones, so we don't discuss it here.
The only thing that I can advise you on is to restore the EFS backup, which includes that devices original IMEI, if one was made and saved to the device. If not, that's no help at all.
I can say that you're on the right track though as far as fixing it. But you need to find your answers somewhere else.

Skipjacks said:
Unfortunately you are going to have to get your information on fixing this elsewhere.
Discussion about changing the IMEI (even from 0 to a working value) are forbidden on XDA as making changes to an IMEI is illegal in most places in the world. And people use that info to make it easier to steal phones, so we don't discuss it here.
The only thing that I can advise you on is to restore the EFS backup, which includes that devices original IMEI, if one was made and saved to the device. If not, that's no help at all.
I can say that you're on the right track though as far as fixing it. But you need to find your answers somewhere else.
Click to expand...
Click to collapse
Thanks for the reply. I realize the issues surrounding changing the IMEI, so I wasn't looking for help with that necessarily (though I would be open to doing so as the phone does have it's own perfectly legal and valid IMEI which I would be using).
I was hoping that perhaps all that was wrong was a corrupt modem, or something along those lines. I have tried to do an EFS restore, but to no avail. Some guides suggest doing a backup of the presumably corrupt EFS and then restoring it, but that didn't help either.
I am probably just going to have to chalk this up to "unfixable", as it most likely is indeed hardware damage.
So unless anyone else has any ideas...

ess.boyer said:
Thanks for the reply. I realize the issues surrounding changing the IMEI, so I wasn't looking for help with that necessarily (though I would be open to doing so as the phone does have it's own perfectly legal and valid IMEI which I would be using).
I was hoping that perhaps all that was wrong was a corrupt modem, or something along those lines. I have tried to do an EFS restore, but to no avail. Some guides suggest doing a backup of the presumably corrupt EFS and then restoring it, but that didn't help either.
I am probably just going to have to chalk this up to "unfixable", as it most likely is indeed hardware damage.
So unless anyone else has any ideas...
Click to expand...
Click to collapse
If you have the valid IMEI that is confirmed good it is fixable. But it just can't be discussed here. I wouldn't throw the phone out. (If nothing else it's a GREAT tiny tablet for wifi use.)
Google will help you out.

Skipjacks said:
If you have the valid IMEI that is confirmed good it is fixable. But it just can't be discussed here. I wouldn't throw the phone out. (If nothing else it's a GREAT tiny tablet for wifi use.)
Google will help you out.
Click to expand...
Click to collapse
Thanks again. I have an authorized Samsung repair place in town, so I will bring it by there first and see if they can handle it. If not, I'll ask my old buddy Google where to take it from there.

Will reflashing a stock, or stock w/root ROM, recover MEID & Sprint Network settings?

Will reflashing a stock, or stock w/root ROM, recover MEID & Sprint Network settings?
I installed TWRP and rooted with Chainfire SuperSU on my Sprint KOT49H.L900VPUCOH3. I have lost the ability to connect to the network, but wifi and bluetooth still work.
I was considering one approach at fixing the issue that is here (which has a much more specific description of what I'm dealing with): http://forum.xda-developers.com/note-2-sprint/help/finding-twrp-efs-backup-sprint-samsung-t3281675. In the meantime I am still digging for a solution as I am without a phone until this is resolved. Somewhere along the way I skimmed past something that said that the phone's "identity" is now not always stored in the EFS partition.
So now my question is, will a stock ROM restore my connectivity to the Sprint network and will my phone's "identity amnesia" be corrected, or would I just have a "stock" phone that won't connect that I can get swapped with Sprint as a tech problem or Asurion as a damaged unit. I am not under warranty or contract, and not ready to commit to a lease on a newer Note model especially since I want to be able to make modifications.
I would appreciate any and all assistance. Part of me wants to just go the try, try again route, and the part of me that understands Murphy's Law wants me to be patient and not do anything else until I know exactly what I'm doing first. We may call it a brick after we've toasted the damn things, but they don't make good paperweights!