Hello.
I'm looking for a case for my SGN ! As the mobile is huge, grip is very important (so TPU may be the best).
A good protection is a also real plus !
Any suggestions ?
Thanks !
I currently have a Nilkin transparent silicon case. The grip is very good and offers good protection for the phone. http://www.nillkin.com/En/ProductView.asp?ID=1916
Looks cool : ordered one !
Related
Hello
Could anubody help me to find a schockproof case resistant to falls for my Galaxy S II? I don't mind if is not cool unless my phone is well protected
What material should it be? and what kind of case do you think that is best?
It HAS to be compatible with the original 2000mah battery!
thanks a lot for your help
The Case Mate Tough case fits, but a bit tight. Someone said that ideally would need to cut out the battery rubber liner (it's a double lined case). YouTube has a bunch of reviews of this case.
take a look at sweet armor, taurus, and akiba slider cases
these cases are made of metal with plastic padding inside.
Not sure about shock proof but it looks very durable.
that or just buy a silicon case. there are new cases made with a matte type of silicon or TPU. they feel really nice in the hand!
Thanks for the help. they really look good. but 60-70 $ for a bumper seems too much for me. I think that I'll go on a casemate tough.
Hey fellas,
Got my hands on the Incipio Faxion today, this is a one-piece hybrid style case that offers great protection without adding excessive bulk. Made of a TPU and polycarbonate combination, the Faxion fits tightly on your Galaxy S3, ensuring a nice and solid feel. Ports and cutouts are perfect on this one, and although the back scratches up, at least the case is getting damaged and not your phone. Scratch & drop protection are very good since the combination of materials provides for great shock absorption and scratch protection. The case retails for 35$ from Incipio but you can find it for 20$ if you look around.
Check out the full review below:
i quite like this one tbh ... will scour around for a cheap one because it looks nice
tawne said:
i quite like this one tbh ... will scour around for a cheap one because it looks nice
Click to expand...
Click to collapse
It's a terrific case! Unless you absolutely love it, stay tuned for my CandyShell review since they are similar cases, that way you can decide which of the two you like better.
Hey fellas,
Got my hands on the Incipio Faxion today, this is a one-piece hybrid style case that offers great protection without adding excessive bulk. Made of a TPU and polycarbonate combination, the Faxion fits tightly on your Galaxy S3, ensuring a nice and solid feel. Ports and cutouts are perfect on this one, and although the back scratches up, at least the case is getting damaged and not your phone. Scratch & drop protection are very good since the combination of materials provides for great shock absorption and scratch protection. The case retails for 35$ from Incipio but you can find it for 20$ if you look around.
Check out the full review below:
Thanks for the review!
I just got my Faxion now (white/grey), and it looks and feels very good.
Animor said:
Thanks for the review!
I just got my Faxion now (white/grey), and it looks and feels very good.
Click to expand...
Click to collapse
It's a pretty awesome case isn't it? I'm slightly leaning towards the CandyShell because of the more conservative design, but this one is great too.
Hey I have the speck candy shell but this looks a little cooler thinking of getting this. Do the buttons feel clicky with this case?
Faxion or Silicrylic?
I posted this question in the other thread that discusses incipio's Silicrylic style of cases, (sorry to duplicate).
Anyone had a chance to compare this (Incipio Faxion case) with the Silicrylic DualPro?
Thanks.
Hi guys,
I am looking for a case for a new Galaxy Nexus I bought..
I would like to request answers with advantages and disadvantages for the following cases:
* SGP Ultra Hybrid
* SGP Neo Hybrid
* Diztronic Matte Back Black / Smoke
I must say - I am working in a really rough place - this is why I need a slim and yet really though case
And I currently own a Galaxy S2 with SGP Neo Hybrid case - and I was pretty impressed by its greatness of protecting my phone
But I would like to acquire a case that is a one piece and not two pieces
BTW - please vote on my poll
Thanks in advanced,
Din.
I have the diztronic case and I can say that it does a good job of protecting the phone while still feeling slim in the hand. I can't speak for the SGP as I've never tried one.
I recommend either the ultra hybrid or ultra capsule. They're light , durable, and stylish. Had them both
Sent from my GNex
Diztronic case here also. Great slim case for the price. Nice fit also even with 2000mah extended battery.
Sent from my Galaxy Nexus using xda app-developers app
Thanks for the comments so far,
One thing I didn't mention - the price isn't my concern..
Please - more comments..
winnope said:
I recommend either the ultra hybrid or ultra capsule. They're light , durable, and stylish. Had them both
Sent from my GNex
Click to expand...
Click to collapse
The ultra hybrid or ultra capsule cases...anybody have a link I never hear of those??
here - ultra hybrid:
http://www.spigen.com/cell-phone/google/sgp-samsung-galaxy-nexus-case-ultra-hybrid-series.html
you can find the others in their website
I'm using a cruzerlite right now and love it. The colors they provide, the protection you get, and the soft case that doesn't make it that much bulkier. The only thing is that it's been pushing up on my screen protector..
Sent from my Galaxy Nexus using xda app-developers app
thank you..looks good..i,m really liking the Mercury tpu cases..waiting for my yelow one to arrive
the diztronic has more lip on it so I would go that route for slightly better protection. the mercury TPU cases are also really nice but they only fit the GSM variants.
I have the Dizitronic case as well. I have some others that I use but that is my primary one. Provides a decent amount of protection and doesn't add much bulk - I like the lip on it as well because I can set the phone down on its face without any concern.
If you want something that is more 'tough' might want to check out the Incipio Silicrylic cases as well. Dual layer so will probably handle a drop better than these TPU style cases. I use that for days when I am being active (running, hiking, etc).
mbh87 said:
the diztronic has more lip on it so I would go that route for slightly better protection. the mercury TPU cases are also really nice but they only fit the GSM variants.
Click to expand...
Click to collapse
Yup..i know,thats what I have..GSM..the Future :]
i have the Ultra hybrid and while it doesnt provide that much protection you arent going to find a thin case that offers any true protection, If you want a protective case i would go with the Kraken or Otterbox or something of the like. Otherwise the fit and design of the Ultra Hybrid is absolutely perfect if you have a GSM phone it provides good protection for cosmetic damage and has a small lip which provides some level of protection when you place the phone screen side down.
the Ultrahybrid also does not attract lint nor does it stick in your pocket like some other TPU/silicon cases. I personally recommend the ultrahybrid if you are going for a minimalist case.
The Neohybrid is one i would definitely stay away from especially if you use multiple batteries and need to pull the phone out of the case alot. Over time the silicon sleeve will become loose and just wont fit your phone nice and snug as it had before.
hope this helps.
- Cheers
I have neo hybrid and kraken. Kraken is like wearing a suit of armor. Its huge and heavy but a great case. I have the neo on it now and love it. Light, grips well and looks nice.
From the mind of Minolta
My girlfriend is about to get the Moto G and I would like to get her a decent case for her new phone, hopefully keeping it <$20.
She tends to drop and bump her phones, so something that's somewhat rugged would be good. I am not sure a standard TPU case like the Hyperion or Amzer is tough/rugged enough. I have looked at the Fosman Hybrid case, I am not sure how it holds up tho..
Your suggestions would be appreciated greatly
Thanks,
Pete
pasta1234 said:
My girlfriend is about to get the Moto G and I would like to get her a decent case for her new phone, hopefully keeping it <$20.
She tends to drop and bump her phones, so something that's somewhat rugged would be good. I am not sure a standard TPU case like the Hyperion or Amzer is tough/rugged enough. I have looked at the Fosman Hybrid case, I am not sure how it holds up tho..
Your suggestions would be appreciated greatly
Thanks,
Pete
Click to expand...
Click to collapse
I'm running with a standard Motorola Grip case and a Nilkin tempered glass screen protector.
If she drops it a I definitely recommend a tempered glass protector. they are proved to protect the screen from a drop much more than a standard rubber protector would.
See my thread about the Trident case. http://forum.xda-developers.com/showthread.php?t=2615270
Here is a cheaper 2 piece case. http://www.ebay.com/itm/HEAVY-DUTY-...Cell_Phone_PDA_Cases&var=&hash=item20e031e4a9
Thanks for everyone's suggestions
I ended up with this case,
http://www.amazon.com/gp/product/B00GJT0KZG/ref=cfb_at_prodpg
Which looks like some version of Wolfens link...So far so good, case is pretty sturdy, fits well and isn't overally huge !!
Pete
pasta1234 said:
Thanks for everyone's suggestions
I ended up with this case,
http://www.amazon.com/gp/product/B00GJT0KZG/ref=cfb_at_prodpg
Which looks like some version of Wolfens link...So far so good, case is pretty sturdy, fits well and isn't overally huge !!
Pete
Click to expand...
Click to collapse
I originally bought that case, but ditched it in favor of the Trident case. The hyperion case is hard plastic inside and out, and won't provide much shock absorption if dropped. It's OK, but kind of cheaply made. Better than nothing though.
Any other rugged Moto G recommendations (lower in price than the Trident ) ? - Thanks
bamx2 said:
Any other rugged Moto G recommendations (lower in price than the Trident ) ? - Thanks
Click to expand...
Click to collapse
I also ended up with the Trident. It was pricey @ $18, but I had a $15 eBay coupon so figured why not. It definitely adds some bulk, but I think I like it overall. one side stays slick, other gets grippy.
This MYBAT Tuff hybrid case seems like it would offer very good protection for the Moto G. Add a screen protector and you're good to go.
Seem to be $7.00-10.00 at fleabay. Search around for MOTOROLA-MOTO-G-GRAY-BLACK-TUFF-SOFT-HARD-COVER-CASE-SCREEN-PROTECTOR
http://store.mybat.com/product/productsearch.aspx?kw=moto g tuff&IsPromotion=-1#aproductList1
http://www.ebay.com/itm/FOR-MOTOROL...t=US_Cell_Phone_PDA_Cases&hash=item2c817d2e79
EDIT- I bought one of these cases. Two days after I received and installed the case (no screen protector yet), I dropped the phone out from 3 ft on pavement. It landed face down. Everything was OK !
I just received a Future Armor Hard Hybrid case yesterday and I really like it. Fit very well. Charging cable fits with case on as well as my OTG cable.
http://www.ebay.com/itm/FUTURE-ARMOR-HARD-HYBRID-IMPACT-STAND-Case-COVER-FOR-Motorola-Moto-G-XT1032-/141204687936?pt=US_Cell_Phone_PDA_Cases&hash=item20e0748c40
For 9.95 I think it's a very well made case. I especially like having the belt clip available when needed.
Hi although the official grip cover looks cool on the device and doesnt add extra thickness to the device.. I am not very confident about how well it would protect the device..hence I have been thinking about getting a Cruzerlite Bugdroid Circuit Case for the phone. Any of you who have been using the Cruzerlite Bugdroid Circuit Case kindly provide some feedback..how thick does it make the phone ? Does it really protect the phone well ?