Is there a way to use the phone while connected to a PC in USB mode? I transfer a lot of files back to back and hate having to wait for the phone to prepare the SD just for one file.
Related
Hi, So ever since I had my phone I was never able to get the SD to mount on my computer when I plug the phone in the USB. I even went into the system and turning on the mass storage. Is there another driver beside the one found on the samsung website? Because of this I can not get my phone rooted with CWM. if anyone can help that would be great!
mannnn said:
Hi, So ever since I had my phone I was never able to get the SD to mount on my computer when I plug the phone in the USB. I even went into the system and turning on the mass storage. Is there another driver beside the one found on the samsung website? Because of this I can not get my phone rooted with CWM. if anyone can help that would be great!
Click to expand...
Click to collapse
Turn USB debugging on. Plug it into the computer. It should make a connection noise. Pull down the notification on your phone and connect mass storage. Your phone should say mass storage connected. If it is not connected as a drive on your computer go to control panel, system, device manager and see where it connected, either "other" or under USB ports as samsung android or something. Click on that and hit update driver. It may take a half hour to find and install all the drivers needed. Then reboot your computer and phone. You should be able to connect then.
Sent from my SPH-D700 using XDA App
i plug the usb cable, select connect the sd card and i start transfering a file from the pc... and then the phone restarts... i cant transfer anything... what is happening?
Sorry if this has already been discussed, but I didn't found any answers regarding my issue.
So how can I transfer files from my pc using the pad's USB cable?
On my Sony phone with ics, it was enough to enable usb debugging mode and the pc sees it as a flash drive, using usb mass storage.
But here it seems there's no mass storage mode, only mtp and ptp which I don't like.
So what options do I have to actually see my 64 gb card when I connect the pad to the pc? Is it possible?
Cause even with debugging mode enabled it doesn't change anything, still have to use windows explorer and it's working very hard. Any help would be much appreciated.
Not sure I fully understand what's wrong with mtp option but I can fully see my 64GB card when connected to my pc via usb cable. I have successfully copied files to and from the SD this way with no issue. Explain what issue you may be seeing.
Usb Mode
gioni mnemonic said:
Sorry if this has already been discussed, but I didn't found any answers regarding my issue.
So how can I transfer files from my pc using the pad's USB cable?
On my Sony phone with ics, it was enough to enable usb debugging mode and the pc sees it as a flash drive, using usb mass storage.
But here it seems there's no mass storage mode, only mtp and ptp which I don't like.
So what options do I have to actually see my 64 gb card when I connect the pad to the pc? Is it possible?
Cause even with debugging mode enabled it doesn't change anything, still have to use windows explorer and it's working very hard. Any help would be much appreciated.
Click to expand...
Click to collapse
Can not see why you have any problems when my G Pad is connected I can see it as a device in My Computer " Not Devices " and when I open it up I see two drives. Internal and external SD card
Make sure you have loaded the LG USB Drivers
Plus it should come up with a list of what you want to do when connected click Open and view files
Thank you for the replies, guys.
Not sure if i made myself clear. Yes, my pc can also see my g pad device in My Computer, but it is not listed as a removable flash drive or an external hdd, thus i cannot see sd card properties, format options and so on. I usually use total commander for transferring files, because windows explorer is way too slow in doing this.
For example, if i want to download a movie or some songs directly to my tablet, how can i do that? With my sony phone is easy, my pc sees it as a removable flash drive, thus is easy to save files directly to it.
But with the g pad that option is gone, or at least i cannot find it. I must first download the files to my pc and only after that transfer them to my pad using windows explorer, which is really working hard. Basically, i have to wait one hour for downloading something, than another hour to transfer the files to my tablet, instead of downloading directly to the tablet.
And all this i believe is the effect of usb mass storage mode missing.
So in the end, is there an option to satisfy my needs?
gioni mnemonic said:
So in the end, is there an option to satisfy my needs?
Click to expand...
Click to collapse
In settings, go to "system", choose "PC connection", choose "media sync(MTP)".
MTP option does exactly what i was saying earlier, it only gives me the option to use windows explorer to transfer files.
It does not satisfy my needs, as i cannot save files directly to the tablet's SD card when downloading something, for example.
Can you people see the tablet's SD card as another DISK drive in your pc? With formatting options, sd card properties and stuff that you can do with a flash drive or an external hdd? This is my question, but i believe this is not possible.
Usb
gioni mnemonic said:
MTP option does exactly what i was saying earlier, it only gives me the option to use windows explorer to transfer files.
It does not satisfy my needs, as i cannot save files directly to the tablet's SD card when downloading something, for example.
Can you people see the tablet's SD card as another DISK drive in your pc? With formatting options, sd card properties and stuff that you can do with a flash drive or an external hdd? This is my question, but i believe this is not possible.
Click to expand...
Click to collapse
I have no problems it must be your USB drivers as mine sees it as a Device
I open mine up from my computer then open the SD card and transfer all my Movies and Pictures direct to the SD card I can open up files on Device or Card
Hi again, i've attached some print screens with the issue i'm trying to explain. The main thing that bothers me is the clearly slower speed for transferring files using windows explorer. With total commander it goes almost double the speed rate. Plus, why should i download a file to my pc instead of downloading it directly to g pad's sd card? Waste of time in my opinion.
But recently i did read somewhere that jelly bean does NOT support usb mass storage, so i guess that answers my question.
Hey guys I was wondering if there was a way to copy files from my computer to the usb mass storage device that I have connected to my fire TV. Instead of taking it out and plugging it back into my pc and vice versa to copy files to it I would like to be able to send them through the network through ADB. Can someone help me with this?
Anyone else having the issue where they can't transfer files from their Win 10 PC to the phone? I have it set to File Transfer mode when I plug it in via USB into the computer. When I pull it up in File Explorer, it says "Phone". Double clicking it shows my MicroSD card and the internal storage. Then when I try to click and drag or Ctrl-C Ctrl-V a file into either spots, nothing happens. I did try enabling USB Debugging mode, but that's not required for a simple file transfer. This is honestly kinda ridiculous. Also, when I'd take my MicroSD and move files from windows to it by connecting it to a USB adapter, the files transfer onto the card, but as soon as I plug it into the phone, all those files disappear in the file explorer and are replaced with a file or folder called System Volume Information. Anyone else having issues??
Nope have copied files from what's app for printing and copied my music to phone storage and external memory card as well,
Sent from my Phone using Tapatalk
I had no issues using the steps you used. I just grabbed my USB-c to USB cable for charging my old oneplus, and it worked.
I used Bluetooth to transfer a few files from my PC to my phone. It worked great
Bluetooth works, plugging in phone (sd card formatted as internal storage), and Teamviewer works. I think I might use Teamviewer as it's similar to a ftp client program, makes it real easy.
What did you format the sd card as? Internal or external storage?
superostrich said:
I had no issues using the steps you used. I just grabbed my USB-c to USB cable for charging my old oneplus, and it worked.
Click to expand...
Click to collapse
Same here.
For normal files and documents i just use Google Drive, i don't have huge important files i need to have when i am out and about so i am unable to test this as i haven't had a need to plug my phone into a pc for 2-3 years.
Bluetooth would work or an SD Card reader, as there are so many ways to get files between a pc and a phone without a cable its partly why ive not even bother to check the does my phone work with my pc step. Back in the days when you got Software and Drivers for your phone are a thing of the past.
I using wi-fi to transfer files you can easily find an app for that
linkhunter said:
I using wi-fi to transfer files you can easily find an app for that
Click to expand...
Click to collapse
Which app are you using?
Heya, chiming in here to suggest Airdroid...look it up, useful and needs no plugging in, just used your WiFi networks to do the transfer, very useful tool (I,d like to thank YouTubes Mr Mobile ((Michael Fisher)) for that)
No problem here also...I just use my GoPro5 Type-C Cable with my Razer, and Copy and Paste in Windows Explorer....easy. I recommend you try another cable
Using an anker "normal" usb to usb c cable works fine to transfer files. But I can only transfer files to the SD card, internal storage doesn't appear.
For transfer via WiFi I use es file explorer, it connects fine to windows shares even with needed auth