Success: downgrade to 0.97 HBOOT + Root + S-OFF + CM7 install - Verizon Droid Incredible 2

This is 4 noobz ... by a noob. READ AT OWN RISK. MAY RESULT IN BRICKED DEVICES OR INJURIES. Seriously I don't know what I'm doing -- mainly copied & pasted code found on different forums.
Copied from my post @ RootzWiki.
After staying up all night long, I finally have my Inc2 rooted, S-OFF, 0.97 HBOOT, running Cyanogen Mod 7, with ClockWorkMod Recovery... started with 0.98 HBOOT, Android 2.3.4, Software # 5.10.605.9 ..... on Windows XP (couldn't get Revolutionary to run on Linux, although Revolutionary is not required for this first & trickiest step, which involves a taco & roots.)
I tried many things, mainly experimenting with attn1's downgrade toolkit PalmerCurling's tacoroot technique @ RootzWiki (search "Gain S-OFF and root" ... go to pg. 7. My post is pg. 10), & also attn1's downgrade guide and some German forum thread I translated.
what I think did the trick, was to get root within the ADB console, with su command, gaining Superuser status with the Android (dialog popped up on Android, which was booted up into the OS, to confirm Superuser request), which then enabled me to initiate tacoroot.
I think.
adb shell
su
and the $ symbol turned into a # symbol, which indicates Superuser (root) permission. Note this is just within ADB shell ... still need to root device permanently. (via temp. tacoroot exploit)
Before I figured this out, I was hitting a dead-end with the "adb shell /data/local/tacoroot.sh --root" command -- "Permission Denied" or some error like that.
But I was trying lots of stuff -- the solution could have been elsewhere. Another thing worth mentioning: I would get a weird syntax error ("newline unexpected?") when using the official tacoroot.sh ... I found some tacoroot.sh linked on a thread, which was much smaller (3KB vs. 38KB). The funny thing is, I don't think I was getting those errors the whole time, with official tacoroot.sh. If you want the mystery zip containing tacoroot.sh & misc_version ... PM me (can't link here). Or find my post in the Rootz thread described above, for all kinds of juicy links.
SUMMARY:
- installed HTC USB Drivers -- also had installed Android SDK tools, but maybe you just need adb.exe & fastboot.exe -- included in toolkit linked below.
1. downloaded toolkit from attn1's post (vwhk.......zip), unzipped to C:\ ... renamed folder to vwhk (simplifies console commands)
2. moved all tools from vwhk root folder into its tools/Win (or use Lin folder on Linux (convenience)
3. also added to vwhk\tools\win the tacoroot.sh (the smaller one I found PM me if you wanna try it < i have no cluez >, AFTER renaming original to tacoroot.sh 1, as a backup.
4. optional I think: added to vwhk tools\win misc_version from github (universal) (version changer? huh..)
I think this is the one I succeeded with... but there is also a misc_version already in the toolkit, which probably will work too. It's also possible my memory is foggy... I also might have bypassed lines 3-4 below, by loading the misctool zip from recovery (you can find misctool on forums -- sets version to 1.0.0... or whatever). Don't trust my memory...
I'm pretty sure I used the following commands (mostly pasted from PalmerCurling's Rootz post linked above):
5. COMMAND TIME.
Phone plugged in with USB, Charge-Only mode, debugging enabled (Dev settings), Fastboot disabled (power settings).
In Windows, Start > Run > cmd ... type cd [path of folder containing tools & files] ... or right-click that folder (eg. vwhk\tools\win) & click Command Here (maybe a Microsoft Powertoy feature? easy download)
adb push tacoroot.sh /data/local/tacoroot.sh
adb shell chmod 755 /data/local/tacoroot.sh
adb push misc_version /data/local
adb shell chmod 755 /data/local/misc_version
adb reboot recovery
reboot phone from recovery
adb shell
su
> got prompt on phone to grant Superuser permission, clicked OH YEAH
adb shell /data/local/tacoroot.sh --setup
<reboot> ... memory... foggy at this point...
adb shell
su
/data/local/tacoroot.sh --root
adb reboot bootloader
fastboot oem rebootRUU
fastboot erase cache
fastboot flash zip <name of the RUU zip from XDA Tool Zip>
fastboot reboot
6. SUCCESS! ?
I then referred to the HTC Incredible 2: Full Update Guide @ CyanogenMod Wiki, to gain S-OFF & install CyanogenMod 7.
- used Revolutionary to gain S-OFF & whatever else it does... includes ClockWork Recovery
- CM7 install was easy. It's great -- lots of customization ... fast ...
however, I think my signal strength has dropped significantly. Apparently a somewhat common problem.
edit: have upgraded Radio, tried both 0722 & 1111, still getting 1-2 bars where I would get 2-3 bars w/ Stock device. Troublesome... I mean it's a phone after all...
Any signal advice?
I updated Roaming, no apparent improvement. (when dialing in to Verizon Activation *228, CM7's built-in Activation Wizard takes over dial-pad ... so I used this ADB console command:
adb shell
service call phone 2 s16 2
to dial 2 on Dialpad ... which doesn't work for starting Roaming Upgrade, but it does re-enable the Dialpad so you can press 2 ...to upgrade roaming capabities. If there's any point to that, anyways... any help with signal appreciated

I used nat3mil's method at youtube and managed to root and get S-Off. Worked like a charm. Took an hour to figure out the method and then attempt. Currently using Nit's Ultimatekangbang build and lovin it.
Sent from my vivow using XDA

Related

[Guide] How to recover your semi-brick

YES YOU NEED TO READ THIS WHOLE POST, PROB MORE THEN ONCE TO MAKE SURE YOU GOT IT. YES I KNOW HOW LONG IT IS, I TYPED IT!
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
first go here and read this for info: http://forum.xda-developers.com/showthread.php?t=838484
now since your here im going to assume that its too late.
*things you will need.
copy of cwm recovery. get it here (the manual install link): http://forum.xda-developers.com/showpost.php?p=9145724&postcount=28
adb installed and working.
a known good rom, or nandroid backup. here is one: http://forum.xda-developers.com/showthread.php?t=836042 (use odex one)
a wpthis.ko for YOUR specfic kernel (run (adb shell cat /proc/version) that will tell you what kernel you have)
*first thing we need to know is, are you s-off or s-on now?
if your s-off just boot into clockwork mod recovery, wipe the phone and flash a known good rom and be done with it. if you dont have cwm recovery installed. boot into fastboot (vol down+power) you must have the sdk/adb installed and working, and type fastboot flash recovery LocationOfRecovery.img (where LocationOfRecovery.img= where you have the recovery, ie c:\android\recovery.img). once thats installed follow instructions above.
*if you are s-on:
will the phone boot into android? if so your not bad off.
if you want to unroot to return the phone, follow the unroot thread here: http://forum.xda-developers.com/showthread.php?t=835971
if you dont want to unroot then you have a couple of different options. if you have cwm recovery still installed, just follow instructions above and flash a known good rom. ive been told that boot.img (kernel) wont flash if you are s-on. the way to fix this (temporarily) is boot into recovery, but before you flash run these commands:
(put wpthis.ko in sdk folder)
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
then proceed to flash the rom. once booted into android skip down to, "now to get back to s-off"
*if you have stock or eng-recovery installed.
will the phone attempt to boot android at all? where is it stuck at?
a good min after it starts to try to boot, type these commands:
adb remount
adb shell
if you can get in shell then theres still hope. back out shell for a second and start here:
put the cwm recovery.img and wpthis.ko in your sdk folder
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb push recovery.img /data/local/recovery.img
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
# dd if=/data/local/recovery.img of=/dev/block/mmcblk0p21 (now wait a min or 2 to give it time to finish)
#sync (give it another min or to just to be safe)
#reboot recovery
at this point you should be in cwm recovery. follow instructions above for flashing with s-on.
*if you cannot get into shell while booting, but have eng-recovery installed, there might be some options.(however this is all theory)
boot into recovery-
if you are on linux using adb, you can try taking sh from /system/bin folder of any custom rom, chmod 0755 it, then push it to /system/bin and adb shell might work.
windows-
boot into recovery.
a system.img compatible with your installed kernel pushed may work. put the system.img into the sdk folder.
adb push system.img /data/block/mmcblk0p25
then reboot and see where you are. if that dont work, grab the modified miscnew.img here: http://www.4shared.com/file/pUPfrGi-/mmcblk0p17.html
rename it misc.img put it in sdk folder and
adb push misc.img /dev/block/mmcblk0p17
then reboot into bootloader with PC10IMG.zip on root of sdcard and it should run though. if it does your fully stock and get to start all over again.
*if you cannot get into shell, and you have stock recovery, im sorry your pretty screwed. as of right now the only thing thats gonna bring it back is a full img/update signed from htc thats equal to or higher then the version currently on the phone. (well and jtag of course)
*well now you've done one of the steps above. your booted into android, you have perm root, and cwm recovery installed, just still s-on. dont worry your almost there!
first take that wpthis.ko for you kernel and push it, and the eng hboot.
adb push wpthis.ko /data/local/
adb push hboot-eng.img /data/local
then from adb shell, or terminal root prompt:
# insmod /data/local/wpthis.ko (again you should get the function not implemented error)
NOW REMEMBER THIS NEXT STEP COULD MEAN DEATH FOR YOU G2 IF TYPED WRONG, AND AFTER ALL THIS HARD WORK!
# dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
wait a few mins to be sure its done.
# sync
wait a few more just cause.
reboot, you should now be s-off, cwm recovery installed, and free to do whatever you want. just dont go screwing it up again
* as new methods are discovered, or ones here are proven wrong, i will update as necessary. as of the writing post, 2 devices that i know of have been saved!
good luck!
wpthis.ko for bacon bits.03 kernel: http://www.4shared.com/file/OAcd1bix/wpthis-263221-cyanogenmod.html
coby kyros mid8048-8 stucks on start up logo screen after rom update can anyone tall me what to do o thing to make a sdcard boot but i dont know how pls helppppp.tnks

[Q] No USB functionality, including USB Fastboot

My HTC Desire has no USB functionality at all, including USB Fastboot. It's also got no root access. There's no known reason why this occured.
Similar forum threads suggest that USB functions can be restored if I revert to the stock RUU image. It's possible that an update has been the cause of this problem.
I've tried to install the base ROM - RUU, but because I have Hboot 0.93 I have to downgrade, but can't do that because there is no existing root access and I don't have ClockWorksMod recovery installed to get around the signature verifications.
The device boots up and operates fine (even the SD Card). I have to charge the battery using my partner's phone and can't do any data transfers. I'm running Android 2.2, Radio 32.49.00.32U_5.11.05.27, Hboot 0.93
I'm beginning to think that the motherboard has somehow been fried and can no longer supprt the USB part of it.
Any ideas would be most helpful. Thanks heaps
As you are unrooted, you should have warranty and that is the first way to fix it.
The other is a bit more complicated but if you are cautions, you'll be fine. Use this guide:
quanchi said:
...
This is a specific situation - usb brick and totally stock rom, recovery and hboot. It's not required for people who have a modified recovery and a rooted rom. It's easy like 1-2-3.
Before doing anything else enable the Debug Mode in the Applications / Dev menu
1. Download the rageagainstthecage exploit from the authors site:
http://c-skills.blogspot.com/2010/08/please-hold-line.html
2. Download the flash_image and misc (mtd0.img) partition image from this thread.
http://forum.xda-developers.com/showthread.php?t=691639&highlight=usb+brick
Modify the mtd0.img according to your phones CID (how to get the CID also explained in the thread)
2. Download Android Terminal Emulator from the Market
3. Copy the exploit binary (rageagainstthecage-arm5.bin), the flash_image and modifed mtd0.img to the sdcard via an external card reader
4. Start the Terminal
5. Copy the files to the Terminal app data directory (the only place on the data partition you will have write access while running the Terminal), and make the binaries executable
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/shared_prefs/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/shared_prefs/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/shared_prefs/mtd0.img
cd /data/data/jackpal.androidterm/shared_prefs/
chmod 755 rageagainstthecage-arm5.bin flash_image
6. Run the exploit
Code:
/data/data/jackpal.androidterm/shared_prefs/rageagainstthecage-arm5.bin
After the exploit exits/finishes there should be a short system freeze, followed by inablity to issue any command from the terminal (don't worry). Exit the Terminal by long pressing HOME and force close the Terminal app from the Application Manager
7. Start the terminal again, a root prompt should be visible
8. Flash the misc partition
Code:
cd /data/data/jackpal.androidterm/shared_prefs
./flash_image misc mtd0.img
9. Reboot
...
Click to expand...
Click to collapse
No luck unfortunately, one of the steps requires the CID, and as you know I have not got USB to access fastboot mode.
Is there any other way to get the CID?
You should read the whole thread for the usb-fix
If I remember correctly you should use "cat /sys/class/mmc_host/mmc1/mmc1:*/cid" (without quotes) command from the terminal emulator.
The terminal emulator in your case will be the substitute for the fastboot, so everything is done via the former.
If you click the link to the quote, you'll see that there are number of people who got it sorted using this method. So just be patient and do the reading.
Ive got same problem, but have fastboot access.. Can I use regular terminal in windows then?
Well, you can use it to find the CID ("fastboot oem boot"), but the other commands in the guide quoted above are for a terminal emulator and are not the same as the ones used with fastboot. So in order not to get confused I recommend you to just use a terminal emulator, it's not harder than fastboot.
Well, i figured out that one on my own.. At least I learn something of this.. Anyway, when i try to execute first command in emulator I just get up "cannot create, directory nonexistent. Ive tripple checked the commandlines.. What could be wrong??
bump.........
Well I followed all the instructions, could get temp root access and flash a modified mtd0.img (which had the correct CID and Rom version) but still no USB. I tried it several times over and can't get anywhere. The hardware must be cactus! Time to throw it over a cliff !!

[Q] HTC Desire USB Bricked & Not Rooted [Q]

HTC Desire USB Bricked Without Root​
Hey guys, got a really tricky one for you here...
Some people may have seen a thread I posted the other day about problems that had arisen with my HTC Desire, well I have managed to find out that these problems are being caused by a USB Brick.
As of now I have managed to restore SD Functions however my phone will still not connect to the computer, and the phone won't recieve a network signal from Orange.
I read through this tutorial here and also this one here. My problem is, all the requirements of the fix, my device does not meet. My phone is not rooted, it is running the latest software and has the latest HBoot.
I also found this that looked very promising, however when I tried to log into my Google account on my phone, everytime it said it couldn't make a connection, I left it for a few hours and the same thing, I can't help but think this is due to the USB brick?
I just really need some help, is there anything I can do to restore USB functionality? The phone is being sent to HTC tomorrow, however I can cancel at any point. Please, I know there are so many amazing people on XDA that can help me. Thankyou
*UPDATE* - After using the Fastboot code to enable the SD Card, my Sim Card is now working. I have been able to log into my G-Mail account and download the terminal emulator which is an apparent fix in one of the posts I linked above, however this doesn't work. Please can someone help me
hy did you try to reinstal the software ???? the original os or an upgrade??
en_mih said:
hy did you try to reinstal the software ???? the original os or an upgrade??
Click to expand...
Click to collapse
I have done a factory reset, re-installed the PB99IMG and also flashed an RRU. All the problems persist
Really need help with this guys! E-Mail - [email protected]
jaaystott said:
Really need help with this guys! E-Mail - [email protected]
Click to expand...
Click to collapse
Hi.
If I understand well, you have got an USB brick, and your current situation is the following :
No S-OFF hboot, no ROOTED ROM, but SDCard reenabled, thanks to "fastboot oem enableqxdm 0" command in fastboot mode.
I'll try to drive you through the whole process for getting your phone back, since I've already encoutered this situation, and successfully solved it.
First step => Get a 'mtd0.img' file :
Go to "Menu>Settings>About phone>Software information>Kernel version", and write down your ROM version (2.6.32.15, for example)
Then, in fastboot mode, with USB cable connected to your PC, issue the following command
Code:
fastboot getvar cid
You should see your phone's CID, something like 'HTC__022'.
You then go to this site, provide both information 'cid' and 'rom version', and you'll get a 'mtd0.img' file.
Let me know when you've gone through this first step
leinad said:
Hi.
If I understand well, you have got an USB brick, and your current situation is the following :
No S-OFF hboot, no ROOTED ROM, but SDCard reenabled, thanks to "fastboot oem enableqxdm 0" command in fastboot mode.
I'll try to drive you through the whole process for getting your phone back, since I've already encoutered this situation, and successfully solved it.
First step => Get a 'mtd0.img' file :
Go to "Menu>Settings>About phone>Software information>Kernel version", and write down your ROM version (2.6.32.15, for example)
Then, in fastboot mode, with USB cable connected to your PC, issue the following command
Code:
fastboot getvar cid
You should see your phone's CID, something like 'HTC__022'.
You then go to this site, provide both information 'cid' and 'rom version', and you'll get a 'mtd0.img' file.
Let me know when you've gone through this first step
Click to expand...
Click to collapse
Hi,
I am very much interested in knowing about the complete procedure. Assuming we have done this first step, how to proceed from here?
HQRaja said:
Hi,
I am very much interested in knowing about the complete procedure. Assuming we have done this first step, how to proceed from here?
Click to expand...
Click to collapse
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
leinad said:
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
Click to expand...
Click to collapse
I already tried this process, it didn't work, when I did the RageAgainstTheCage command, it said searching for ADB, then something about not being able to find it, then when I restart the terminal and do the final command, it says permission denied -_-
jaaystott said:
I already tried this process, it didn't work, when I did the RageAgainstTheCage command, it said searching for ADB, then something about not being able to find it, then when I restart the terminal and do the final command, it says permission denied -_-
Click to expand...
Click to collapse
In order for rageagainstthecage to find adb process, you should tick 'USB debugging' in "Menu>Settings>Applications>Development>"
leinad said:
In order for rageagainstthecage to find adb process, you should tick 'USB debugging' in "Menu>Settings>Applications>Development>"
Click to expand...
Click to collapse
I could have fixed this myself aswell :| **** i just sent off my HTC Desire 30 seconds ago, no joke, the UPS guy just came and got it
jaaystott said:
I could have fixed this myself aswell :| **** i just sent off my HTC Desire 30 seconds ago, no joke, the UPS guy just came and got it
Click to expand...
Click to collapse
:-( (10 characters)
leinad said:
:-( (10 characters)
Click to expand...
Click to collapse
I really appreciate the help you gave me mate, even if I asn't able to fix my device, thankyou for the time.
leinad said:
Next step will aim at flashing this 'mtd0.img' file onto the 'misc' partition.
Since we are S-ON, and the ROM is not rooted, we'll have to get temp root access. To do so, follow the steps below.
1.- Download the two files rageagainstthecage.tgz and flash_image, extract rageagainstthecage-arm5.bin, and copy rageagainstthecage-arm5.bin, flash_image, and the file mtdo.img at the root of your SD using any SD card adapter.
2.-Install 'Terminal Emulator' (free app on the Android Market) on your phone
3.- Issue the following commands from Terminal Emulator
Code:
cat /sdcard/rageagainstthecage-arm5.bin > /data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
cat /sdcard/flash_image > /data/data/jackpal.androidterm/flash_image
cat /sdcard/mtd0.img > /data/data/jackpal.androidterm/mtd0.img
cd /data/data/jackpal.androidterm/
chmod 755 rageagainstthecage-arm5.bin flash_image
This will copy all three files to the right directory on your phone, and give exec rights to the files.
4.- Then run the program rageagainstthecage-arm5.bin from the Terminal Emulator
Code:
/data/data/jackpal.androidterm/rageagainstthecage-arm5.bin
in order to get temp root access. Be aware that the phone will have some kind of erratic behavior, and will seem to crash.
5.- Quit Terminal Emulator, stop it (Menu>Settings>Applications>Manage applications>Terminal Emulator>Force stop), and relaunch it. You should see a pretty # character, indicating you've got temp root access.
6.- You then issue the following commands, in order to flash the misc partition of your phone with the correct mtd0.img file
Code:
cd /data/data/jackpal.androidterm/
./flash_image misc mtd0.img
7.- Reboot your phone, and enjoy !!!
PS : All credits come to Antubis, from the French forum FrAndroid, who posted a very clever tuto in french
Click to expand...
Click to collapse
Thanks, will feature your method in a guide at my blog (while giving you and Antubis full credit for it of course). =)
trying to follow your guide to restore my phone to work again! having trouble though...
i have got to the point of installing terminal emulator but at the point of issuing second cat command it says no such file or directory..
moley10 said:
trying to follow your guide to restore my phone to work again! having trouble though...
i have got to the point of installing terminal emulator but at the point of issuing second cat command it says no such file or directory..
Click to expand...
Click to collapse
I found a way around this, as I was having the same problem. Try This ->
cat /sdcard/rageagainstthecage-arm5.bin > data/data/rageagainstthecage-arm5.bin
Do that for the two other commands that follow that, then follow the instructions as given, that should work.
HQRaja said:
Thanks, will feature your method in a guide at my blog (while giving you and Antubis full credit for it of course). =)
Click to expand...
Click to collapse
Link to your blog? =)
ok, so i did that, no longer got errors.. seemed to work but after reboot still the same, doesnt connect to my pc, and device manager it is still being shown as 'qualcomm cdma technologies msm' in other devices!
is the purpose of those commands to moved the files to certain directory? i can get temp root with visionary to perhaps just move the files in root explorer?
thanks for all the help. its much appreciated!
Hello,
I've got a similar problem but this solutions doesn't work for me, because I cannot create a CID.
Any ideas?
Thanks in advance
hi,
i managed to create files etc and still am stuck with the same problem... searched hi and low for days,
hopefully someone will be able to find us a solution..
You mean creating the mtd from that site? Thats because you need to type the Build Number not the kernel version.

[GUIDE][30/06/2011]Root AND Downgrade Desire Z/G2(S-OFF/ClockWorkMod) -No Gingerbread

This guide is now obsolete. Please use this guide instead.
For Gingerbread Phones, Please use this guide.
Hey guys, this is probably the easiest guide to follow for rooting a branded desire Z. The reason why this can sometimes be hard is cause it uses a unique identifier (INFOCID) and the companies that brand the phones ONLY want roms from their company on them. This stops us from using a WWE rom like every else to downgrade and then root.
But ultimately, the reason I'm making this is because every other guide I've read constantly links you to other guides or other pages and it sorta annoyed me. So after I figured it all out I posted one concise guide that doesn't redirect you 50 times.
Now I’m gonna run you through EVERYTHING so you won’t get stuck anywhere.
This guide will work with:
Device: Desire Z or G2
Firmware Version: Any Firmware version will be fine (All you need to do is downgrade using step 1)
Android Version: Froyo or any previous variation of Android (Absolutely no gingerbread device will root with this method)
Btw, I take no responsibility for any damage taken by using these procedures. Sorry =P
Also if you don't have ADB and Fastboot set up then go ahead and follow the guides on the first two posts here. -Thanks nephron
g4b4g3 said:
If your INFOCID is NOT one of these you need to make a goldcard to downgrade!
HTC__001
HTC__032
HTC__E11
HTC__203
HTC__Y13
HTC__102
HTC__405
HTC__304
HTC__A07
HTC__N34
HTC__J15
Which can be checked by typing the following two commands:
adb reboot bootloader
fastboot oem boot
Click to expand...
Click to collapse
If your CID matches one of the CID's above then you can skip Step 1.
1. Creating a Goldcard:
Prerequisites:
ADB Set up and running fine (to check if it is working just connect your phone and have USB debugging enabled. Then type adb devices in your CMD Prompt)
HxD Hex Editor (see attachments of post 1)
USB Debugging enabled on your phone
1.Firstly we need to mount the memory card on a windows PC.
2. Format the memory card as FAT32 using all the default options.
3. Mount the memory card on your Phone. Then give it a couple of seconds.
4. Remount the memory card on your PC.
5. Find your CID by using the follow command in your cmd prompt (YOU NEED ADB)
Code:
adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid
6. Use the excel sheet provided to reverse the CID (see Attachments)
7. Goto this website and send yourself a goldcard.img
http://psas.revskills.de/?q=goldcard
8. Run HxD hex editor AS AN ADMINISTRATOR! (I can’t stress how important having admin rights is)
9. Go to Extras > Open Disk Image. Then select your goldcard.img
10. Go to Extras > Open Disk. IMPORTANT: Select your memory card UNDER the Physical Drives category. DO NOT open the logical drive.
11. Switch to your goldcard.img tab. Go to Edit > Select All. Then Edit > Copy.
12. Go to the physical drive tab and select the lines 00000000 until you get to the one with 00000170.
13. Go To Edit > Paste Write.
14. You should have a huge block of red characters now. This is good btw.
15. Mount your SD card on your Phone and let it detect it. If it comes up with a corrupt SD card error you have done it wrong and you may have to start over.
16. You are done with the goldcard.
2. Downgrading and Debranding
Before you start this please do the following:
1a. Download the RUU I’ve linked (it should be a ~300mb exe file) -Thanks g4rb4g3
ii. If you are a BELL User. Please download this RUU instead.
1b. Run the setup until you get to the screen with the tick boxes (Some Users may have to run this as an Administrator)
1c. Leave the setup running and go to C:\Users\<your account name>\AppData\local\temp ( Or Try %AppData%\Local\Temp\ ). Then right click and Sort By Date Modified. Look for the most recently created folder which should look like {xxxxxxx-xxxxxx-xxxxxxxx}. Then navigate into it and its then into its one folder. Look for rom.zip and copy that to your goldcard/memory card.
1d. Rename the rom.zip on your memory card to PC10IMG.zip (Make sure it is exactly the same as the way I've typed it there)
1e. Mount your sd card back onto your phone.
2. Download the attachments (misc_version & psneuters) and extract them in a folder like C:\RootVision\
Now you are ready to begin:
1. Open a CMD prompt window
2. Navigate your way to the folder with psneuter & misc_version IN CMD PROMPT. (So the cmd prompt window should be something like this C:\RootVision> )
3. Now we will use the following 5 commands one after the other
Code:
adb push psneuter /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/psneuter
adb shell chmod 777 /data/local/tmp/misc_version
adb shell /data/local/tmp/psneuter
adb shell
4. After the last command you should have a # and a flashing line for you to enter text. This is good. (If you get a $ you have done it wrong and should try typing the commands out again)
5. Now you have the # type the following command in: (This will spoof the radio version)
Code:
/data/local/tmp/misc_version –s 1.33.405.5
Then go ahead and type:
Code:
exit
6. Type this command into your cmd prompt (btw you should be back with the normal C:\RootVision>)
Code:
adb reboot bootloader
7. Once on your white screen with colourful text you can go ahead and press the power button ONCE
8. Now just wait for the rom to install and verify. If you get INCORRECT CID your gold card doesn’t work or your CID doesn't match and you'll need a goldcard. (Go to Step 1. and make a goldcard for your phone)
9. Go ahead and install the rom when it asks you.
10. You are done downgrading and can now begin the Rooting process.
See Post 2 For Rooting
Assuming all as gone well and you now have a rom without superuser but you have a baseband version that is 1.34xxxx.
Alright, let’s begin.
Prerequisites:
Download psneuter
Download gfree 0.5
Download root_psn
Download flash_image
Download the Desire Z hboot
Download Clockwork Recovery
ALL of these are in the attachments section
They all should be extracted into the same folder. Use something simple like C:\RootVision\Root
3. Root your Desire Z!
Before you start:
Enable USB Debugging and Allow Unknown Market Installations again.
Also delete the PC10IMG.zip on your phone if you downgraded.
Okay lets go:
1. Now Assuming you succeeded at the last part you should have a stock-ish rom without superuser. What we want to do is start by pushing all the files across with the following adb commands (use in cmd prompt the same way you pushed files in 2.)
Code:
adb push psneuter /data/local/tmp/
adb push gfree /data/local/tmp/
adb push busybox /data/local/tmp/
adb push root_psn /data/local/tmp/
adb push flash_image /data/local/tmp/
adb push su /sdcard/
adb push hboot-eng.img /data/local/tmp/
adb push Superuser.apk /sdcard/
adb shell chmod 755 /data/local/tmp/*
2. Alright now we have all the files we need to root the phone. Input the following command. This is just putting our clockwork recovery in a convenient place with an easy name.
Code:
adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
3. Now we’re gonna temp root again by typing in the following:
Code:
adb shell /data/local/tmp/psneuter
adb shell
4. This should leave us with another #. Now enter the following commands:
Code:
cd /data/local/tmp
./gfree -f -b hboot-eng.img
./flash_image recovery recovery.img
./root_psn
sync
5. Type in: (thanks for the correction john_d1974)
Code:
reboot
6. You should have a rooted phone with superuser after the reboot. Also it will have clockworkmod, SuperCID, secu-flag off & an Unlocked HBOOT-ENG.
If gfree 0.5 doesnt work for you then this section is for you:
Prerequisites:
Download psneuter
Download gfree 0.2
Download root_psn
Download flash_image
Download the Desire Z hboot
Download Clockwork Recovery
ALL of these are in the attachments section
They all should be extracted into the same folder. Use something simple like C:\RootVision\Root
1. Now Assuming you succeeded at the last part you should have a stock-ish rom without superuser. What we want to do is start by pushing all the files across with the following adb commands (use in cmd prompt the same way you pushed files in 2.)
Code:
adb push psneuter /data/local/tmp/
adb push gfree /data/local/tmp/
adb push busybox /data/local/tmp/
adb push root_psn /data/local/tmp/
adb push flash_image /data/local/tmp/
adb push su /sdcard/
adb push hboot-eng.img /data/local/tmp/
adb push Superuser.apk /sdcard/
adb shell chmod 755 /data/local/tmp/*
2. Alright now we have all the files we need to root the phone. Input the following command. This is just putting our clockwork recovery in a convenient place with an easy name.
Code:
adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
3. Now we’re gonna temp root again by typing in the following:
Code:
adb shell /data/local/tmp/psneuter
adb shell
4. This should leave us with another #. Now enter the following commands:
Code:
cd /data/local/tmp
./gfree -f
./flash_image recovery recovery.img
./root_psn
sync
5. Type in: (thanks for the correction john_d1974)
Code:
reboot
6. You should have a rooted phone with superuser after the reboot. Also it will have clockworkmod, SuperCID and secu-flag off.
4. Installing your own custom ROM
This section is just in case you don't know how to install a custom ROM.
Note: Always make sure the ROM you are installing is FOR YOUR PHONE! If you install a ROM meant for another phone you could potentially damage it or brick the phone itself.
1. Download the ROM you want and copy it to your SD Card. (Try to keep it in a folder that is easy to get to)
2. Turn off your phone.
3. Hold down the volume down button and then press the Power Button. This should take you to a white screen with lots of colourful text. One of which says FASTBOOT or FASTBOOT_USB.
4. Press the power button ONCE when BOOTLOADER is selected(BLUE)
5. Navigate using the volume buttons until you get to RECOVERY and then press the Power Button again.
6. The HTC Logo will come up then you will get a black screen with text.
7. From here you should Always do a NANDROID Backup so you can restore a working ROM if something fails.
NANDROID Backup
7a. Navigate to 'backup and restore' and then select it by pressing the trackpad button.
7b. Select 'Backup' and then let it finish. Once done you have a backup of your android.
8. Now you want to do these before you start installing:
a. 'wipe data/factory reset
b. 'wipe cache partition'
c. Go into 'advanced' and select 'Wipe Dalvik Cache'
9. Now you can install the ROM itself. This is done by selecting 'install zip from sdcard' in the main menu. Now you can select 'choose zip from sdcard' and just go ahead and select the ROM you copid to your sd card earlier.
9a. If the phone says verification failed then just toggle the signature verification option.
FAQ - For Anyone with any issues.
1. My version is 1.7xxxx or higher. Can I use this method?
Yes you can. This method will downgrade your phone to 1.34 so your radio is no longer locked thereby allowing you remove the secu-flag, add superCID and allow you to install a custom recovery (like ClockWorkMod)
2. My CID is XXXXXXXX and isn't on that list, will this method still work?
Yes it will. The reason why it will work is because a goldcard is essentially a manufacturers way of bypassing the CID checks used by ROMs. Therefore, by creating our own unique goldcards we can also bypass the CID check.
3. My CID is on the list that you mentioned. Do I need this goldcard?
No, you can skip the 1st step because when the ROM checks your phones CID it will match up perfectly and the phone will install the older radio without issue.
4. What Benefits does rooting a phone grant you?
Simply, it allows you to install any ROM of your choosing onto the phone as well as use custom kernels and certain applications that access locked functions on the phone. This can ultimately lead to; a longer battery life; more stable roms and more frequently updated roms; and finally an overall faster Android experience.
5. What is root access?
Root access essentially gives you access anything locked by the manufacturer on the phone. This most importantly means that you can read and write to any system partitions on the phone that would normally be locked.
6. Whats psneuter?
psneuter is an application used to grant temporary root access. This is done through an exploit in the android system and will give us a window to further exploit the system and ultimately grant us Permanent Root Access.
7. How do I find my CID?
To find your CID you run two commands. Firstly, in your CMD prompt you type 'adb reboot bootloader' when your phone is connected and USB debugging is active. This will restart your phone into its bootloader. Then once you see the words FASTBOOT_USB you type 'fastboot oem boot'. Then look for the words CID and then just read the 8 character CID.
Also there is a post with a screenshot here.
8. My phone will not find PC10IMG.zip
You will need to double check that the PC10IMG.zip is the correct ZIP file from the RUU that has been linked. It should be roughly 250mb in size and should be placed in the root folder of your SD Card. Also your SD Card must be compatible with your device (able to be read/written to). If you cannot access your SD Card from your Desire Z or G2 then there is probably something wrong with your SD Card. It should probably be reformatted.
9. Can I use this on the Desire Z/G2 running Gingerbread?
So far no one has been able to root the gingerbread version of android on the Desire Z/G2. Unfortunately, this guide still cannot root gingerbread desire Zs or G2s.
If there are any more, feel free to post them and I'll add them
10.I'm Missing my AdbWinApi.dll? What now?
espentan[U said:
][/U]
I don't know if you've figured this one out yet, but here's the solution to a potential cause.
You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
For this exercise I'm going to assume that you have installed the Android SDK in the directory called "android-sdk-windows" on your C: hard drive. If you have it installed somewhere else, change the path I'm mentioning below accordingly.
Go to the Windows "Control Panel".
Click on "System and Security".
Click on "System".
Click on "Advanced system settings" in the left column of the window you're in.
Find the button called "Environment Variables" in the window that opens (it's at the bottom on the first tab).
Scroll down in the "System variables" box until you find "Path".
Select "Path" and click the "Edit" button.
At the very beginning of the input field called "Variable value" enter the following:
"C:\android-sdk-windows\platform-tools;" (without the quotes).
Do not remove any of the other paths, and make sure you have a semi colon at the end of the new path you're adding.
Reboot.
Now the windows command shell knows where to find the necessary DLL's and whatnot.
Click to expand...
Click to collapse
will this work if i have 1.84.666.2?
anyone? thought?
Should work fine as long as you've got a Desire Z or G2 lol.
hi, manageage to root the DZ sucessfully, however on step 5 you say
"5. Type in:
Code:
Reboot"
i got an Reboot: error not found
i retried with with "reboot" and was sucessful
Hi, im sure this has been covered before in other posts, but, could someone tell me, if i were to use the above method to downgrade and root etc, would this prevent me from doing an official upgrade, to, say gingerbread in the near future? Also is there any real benefits to going to gingerbread? I ask as im sure ive read somewhere its only possible to flash to cooked roms, not official ones (once downgraded and rooted etc).. this would concern me as ive moved over from win mo to android, and in my experiance, EVERY cooked unoficial rom i ever flashed (xperia x1) was simply rubbish, and i tried alot of them. (Even though people would say the roms would be fine, bugs smoothed out etc), i went back to stock in the end after constant dissapointment.
Sorry for the rant, just need to know where i stand.. thanks people..
jmpcrx said:
Hi, im sure this has been covered before in other posts, but, could someone tell me, if i were to use the above method to downgrade and root etc, would this prevent me from doing an official upgrade, to, say gingerbread in the near future? Also is there any real benefits to going to gingerbread? I ask as im sure ive read somewhere its only possible to flash to cooked roms, not official ones (once downgraded and rooted etc).. this would concern me as ive moved over from win mo to android, and in my experiance, EVERY cooked unoficial rom i ever flashed (xperia x1) was simply rubbish, and i tried alot of them. (Even though people would say the roms would be fine, bugs smoothed out etc), i went back to stock in the end after constant dissapointment.
Sorry for the rant, just need to know where i stand.. thanks people..
Click to expand...
Click to collapse
It is pretty difficult to go back to stock updates from your carrier for example Vodafone. This is because of the unique CIDs used and the fact that it is extremely hard to find a stock ROM since no one can give you a NANDROID backup.
Anyways, there are numerous benefits to rooting your phone included with most ROMs. These benefits include longer battery life, faster ROMs & various other things depending on each chef.
Ok, thanks, but are the roms buggy at all, will some of the hardware not work properly, or will i have freezing probs etc, as i found this always to be the case with win mo roms?.. have you personally found a rom that works perfectly that includes htc sense? As i do like the UI..
My goal is to have all security off, full perm root, with a perfecly working sense rom that i can then overclock to a speed that works well with my particular phone, and to underclock when idle etc..
Thanks..
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Newbie question,
how to unroot if i rooting the phone using this metode?
and how to go back to original rom?
Vader™ said:
Newbie question,
how to unroot if i rooting the phone using this metode?
and how to go back to original rom?
Click to expand...
Click to collapse
Firstly, to root the phone just follow the steps and once you've finished them all you will be done.
Second, it should technically be possible once you've rooted the phone to simply do a NANDROID backup via ClockWorkMod Recovery before you start flashing new ROMs. If you have backed it up and later decide you want to unroot then all you would need to do from there is restore your nandroid backup and unroot the phone through this method.
forceOnature said:
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Click to expand...
Click to collapse
Using this method you don't have to worry about your CID. If you make a goldcard it will completely bypass the need for one of the CID's listed in the first post. So to put it simply, you don't need to worry about your unique CID if you create and use a goldcard to downgrade.
Aegishua said:
It should technically be possible once you've rooted the phone to simply do a NANDROID backup via ClockWorkMod Recovery before you start flashing new ROMs. If you have backed it up and later decide you want to unroot then all you would need to do from there is restore your nandroid backup and unroot the phone through this method.
Click to expand...
Click to collapse
okay, but we need to root the device first right? before ClockWorkMod Recovery can run, the problem is, if I root the device first, the device must be downgrade to build 1.34.405.5, and now my Desire Z using build 1.82.xxx.x
is it if we backup via ClockWorkMod, the ROM that we backup is 1.34.405.5? not my current build?
please help bro, really confused here
Hi forceonature, im no expert, but when i was having a look myself, i found out it was simply my enviroment variables wernt set up for the directory fastboot was located.. an easy way round this was just to enter the directory fastboot was in (program files, 'some directory'.. do a quick search) within your command prompt, and type the second command from there.. hope that helps..
Everything goes fine until
mmap() failed. Operation not permitted
when I put in
adb shell /data/local/tmp/psneuter
Any help?
Also I can only put su and Superuser.apk on my sdcard if I manually transfer them.
Hi forceonature, im no expert, but when i was having a look myself, i found out it was simply my enviroment variables wernt set up for the directory fastboot was located.. an easy way round this was just to enter the directory fastboot was in (program files, 'some directory'.. do a quick search) within your command prompt, and type the second command from there.. hope that helps..
Click to expand...
Click to collapse
I need to verify that my Tmobile G2's INFOCID is compatible.
I typed in the two commands:
adb reboot bootloader
fastboot oem boot
The first one worked. The second command is not recognized once I'm in the bootloader. Can someone suggest a solution?
Click to expand...
Click to collapse
I tried the same thing to get my DZ phones CID and the first one worked and the second didn't. If I don't have to make a gold card all the better. How can I find out for sure if my CID is on the list or not? Also if I have to make a gold card do I need to have a micro SD card to make the gold card?
Thanks,
Chevy
chevy2410 said:
I tried the same thing to get my DZ phones CID and the first one worked and the second didn't. If I don't have to make a gold card all the better. How can I find out for sure if my CID is on the list or not? Also if I have to make a gold card do I need to have a micro SD card to make the gold card?
Thanks,
Chevy
Click to expand...
Click to collapse
You should get a line that says INFOt.cid=XXXXXXXX or any of the lines that say your 8 Digit CID. However, as you can see there are multiple lines that say it and they should all be the same.
If your CID does match one on that list then you will not need a goldcard.
I've attached a screenshot to make things easier.
forceOnature said:
okay, but we need to root the device first right? before ClockWorkMod Recovery can run, the problem is, if I root the device first, the device must be downgrade to build 1.34.405.5, and now my Desire Z using build 1.82.xxx.x
is it if we backup via ClockWorkMod, the ROM that we backup is 1.34.405.5? not my current build?
please help bro, really confused here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Yeah, you can only have a NANDroid backup of 1.34.xxx because there is no way to get clockwork onto a 1.72+ rom.
Hi, I'm new to rooting the G2. Iv'e been trying to follow this tutorial, but I'm having some trouble. After renaming Rom.zip to PC10IMG.zip I booted into the bootloader and it says 'no image found' or something like that. What am I doing wrong? Am I not supposed to put the zip file on the root of the SD card? Is it possible to just use the RUU to downgrade?
And regarding the downgrade, the build number on my G2 shows 1.22 . Isn't that lower than 1.34?
Any help is appreciated!
I followed the instructions twice and both times I get to
"/data/local/tmp/misc_version –s 1.33.405.5"
I get
/
Patching and backing up partition 17
Error opening backup file.
#
The first time around I iqnored it and went through hboot, the rom PC10IMG.zip was checked and verified and finally failed prompting "the main version is older"
what am I missing?
EDIT: checked SD card, unmount and remounted phone/sdcard no avail.
Will try 1.33 Bell rom next.
EDIT2: Patching and backing up sucessful, problem was I couldn't get my phone to stay in debugged mode without being in DISK DRIVE, had to start HTC Sync to mount the phone in that way to relieve the sd card, allowing adb to patch the file. Now running through PC10IMG.zip with fingers crossed.
EDIT3: Everything went smooth after that! Thanks. Now I will attempt to update to 2.3 and Sense 3.0
EDIT4: Now running on 2.3.3 and Sense 3.0 Virtuous port. Testing...probably going back to more stable gingerbread and sense 2.1

[Q] Cant Root 2.3.3 unbranded htc desire hd

Originally Posted by ruben_swing
1st you will need the following files
GingerBreak from http://c-skills.blogspot.com/2011/04...ngerbreak.html
misc_version from http://www.multiupload.com/A9PNGVBWBE
Default rom http://forum.xda-developers.com/showthread.php?t=905003
and Android SDK http://developer.android.com/sdk/index.html
Also you will need a clean SD card 1 gig or more should be fine (smaller is better)
Unzip GingerBreak and misc_version into a folder say c:\Downgrade (I normally use 7Zip)
You should have:
c:\Downgrade\GingerBreak with 5 Files
c:\Downgrade\misc_version with 4 Files
Make sure you installed Android SDK's Platform tools and updated your path to reflect this
IE: run SDK Manager and install Android SDK Tools and Google USB Driver pack if you don t have HTC Sync driver running.
Format the SD card and copy the rom.zip into the base of the card, not a sub directory. (Do not unzip)
Now: Plug in the phone to the USB and make sure Debugging is on and the phone is set to charge only.
Then open Command prompt ie: run cmd.exe
Go to your Downgrade directory and test if your adb command is in the path. ie: run it and make sure it lists switches and not say file not found
Then run as follow
adb push misc_version /data/local/tmp
adb push GingerBreak /data/local/tmp
adb shell chmod 777 /data/local/tmp/misc_version
adb shell chmod 777 /data/local/tmp/GingerBreak
adb shell
./data/local/tmp/GingerBreak
if you fail to get root ie: prompt does not return to # or get a endless sendmsg() failed? Error, reboot the phone and repeat the commands above. The phone I used, took 3 tries to get this right.
at the # run the following
cd /data/local/tmp
./misc_version -s 1.31.405.6
When its done exit cmd and goto your phone, Reboot it while pressing volume down.
It will come up with a menu and follow the update instructions.
You should then be on Android version 2.2 when done.
Please note the rom that is supplied works with unbranded phone only if you have a branded phone you will need to make a goldcard. If you want to know how to make one, google is your friend sorry.
Hello Folks,
I have the same software as mentioned in the first post above:
Android Version: 2.3.3
HTC Sense Version : 2.1
Baseband : 12.54.60.25U_26.09.04.11_M2
Kernel : 2.6.35.10-g0956377 ([email protected]#1)
Build Number : 2.36.405.8 CL47853 release-keys
Software : 2.36.405.8
and tried the solution as given to the reply to the post. I have an unlocked unbranded HTC Desire HD. The cmd window looks like below.
c:\Htc>adb push misc_version /data/local/tmp
adb server is out of date. killing...
*daemon started successfully*
410 KB/s <16830 bytes in 0.04s>
c:\Htc>adb push GingerBreak /data/local/tmp
adb server is out of date. killing...
*daemon started successfully*
410 KB/s <16830 bytes in 0.04s>
c:\Htc>adb shell chmod 777 /data/local/tmp/misc_version
adb server is out of date. killing...
*daemon started successfully*
c:\Htc>adb shell chmod 777 /data/local/tmp/GingerBreak
adb server is out of date. killing...
*daemon started successfully*
C:\Htc>adb shell
adb server is out of date. killing...
*daemon started successfully*
$su
su: permission denied
$
I would appreciate if anyone could help me out. One other thing is the I was a bit lost about the installation of the Android SDK Platform etc...as mentioned, I presume it is required if you don't have HTC sync/drivers installed! Or is still needed?.
Just follow jkoljo method, worked for me.
http://forum.xda-developers.com/showthread.php?t=905003
I think you need to run GingerBreak in you method instead of typing su
Hope that will help.
naailalzuhir said:
Just follow jkoljo method, worked for me.
http://forum.xda-developers.com/showthread.php?t=905003
I think you need to run GingerBreak in you method instead of typing su
Hope that will help.
Click to expand...
Click to collapse
Thanks for the reply mate. It's my mistake, I was actually typing the cmd window in the forum so might have omitted the line actually. So yeah, I did run the gingerbreak following
adb shell
./data/local/tmp/GingerBreak
after which it again returns to $. I read in the same thread below
http://forum.xda-developers.com/showthread.php?t=905003
that you have to get a # instead of $. So if you get $ then type su to get super user. It is said that a window will pop up on phone after typing su in cmd asking for permission. But I don't get any such pop up on my phone screen. Also, after running Gingerbreak, the cmd just returns the same $. Gingerbreak does not even run as far as I can say.
I wonder why after each adb command it returns:-
adb server is out of date. killing...
*daemon started successfully*
Any thoughts...
Use the adb that comes with jkoljo downgrade pack, and install HTC sync on your PC.
hello.. i have a desire hd with build number 2.37. based on gingerbread 2.3.3 .. i have a unbranded desire hd with s-off.. is it possible for me to downgrade to 2.2.. i followed ur guide using dhd in charge only with debugg mode but every time it gives me erroe that adm is out of date killing deamon started succesfull.. pls help i m fed up with the stock rom .. gingerbread ota is full of bugs and with connectivity problems.. thankz in advance
As far as I know, you cannot temp root 2.37 and hence downgrade is impossible at present
But you mentioned that you have S-off... how is that possible? Because if it is S-off, I am sure you can flash a custom recovery and then flash a custom Rom.
naailalzuhir said:
Use the adb that comes with jkoljo downgrade pack, and install HTC sync on your PC.
Click to expand...
Click to collapse
Thanks for the reply. Yes, I am using the adb that came with the xda thread to downgrade. It's a folder that contains the adb and other stuff like GB........Yes, I do have HTC Sync installed on the PC as well.....so far I tried both my notebook and home desktop...same results. So confused...
I have s-off because when I was on froyo with build number 1.32 I rooted my dhd.. and now I updated it 2.3.3. Check the last post they say u can try downgrading if u have dhd with s-off
Sent from my Desire HD using XDA Premium App
If you have S-OFF you should be able to flash CWM and install another ROM as naailalzuhir says. If you go to the CWM thread in the development section, it will tell you how to flash CWM from fastboot. When that is installed you should just be able to install a different ROM without downgrading. I think, but lets wait for soebody else's opinion on that.
Petronoid said:
Thanks for the reply. Yes, I am using the adb that came with the xda thread to downgrade. It's a folder that contains the adb and other stuff like GB........Yes, I do have HTC Sync installed on the PC as well.....so far I tried both my notebook and home desktop...same results. So confused...
Click to expand...
Click to collapse
Do you have anything from SDK running in background? Check your task manager, if you have adb.exe running, terminate it before running adb shell command.
I am assuming that you closed HTC sync software on your PC, plugged with USB debugging mode and charge only.
Hope that can help.
gagan01 said:
I have s-off because when I was on froyo with build number 1.32 I rooted my dhd.. and now I updated it 2.3.3. Check the last post they say u can try downgrading if u have dhd with s-off
Click to expand...
Click to collapse
Hmm interesting You can indeed flash a custom Rom then and forget the hassel to root.
See these two posts in the forums for guidance.
http://forum.xda-developers.com/showthread.php?t=1017364 and http://forum.xda-developers.com/showthread.php?t=948304
NOTE: try to download 3.0.2.6 instead of 3.0.0.5 for EXT4 support.
Cheers
U want to say that if I Ve s-off I can flash custom Rom directly .. irrespective of temproot and that stuff... Guyz do temproot those u Ve s-on.. if this is soo I m on the top of the world
Also one thing does flashing from cwm is different than flashing custom Rom from rommanager.. I installed Rom manager but the option to flash cwm is not clickable .. pls help
Sent from my Desire HD using XDA Premium App
That should be because you're not rooted so you do not have access to the recovery directory whilst booted into Android. You can also flash CWM from fastboot, bypassing the Android system completely. Instructions how to do that and the CWM files are here: http://forum.xda-developers.com/showthread.php?t=1003723
Please wait for somebody's confirmation before attempting that though.
There is one more question if sumthing goes wrong while flashing then my phone ll be dead or get reverted to stock Rom.. if any unfortunately phone becomes dead then is there any chance reviving it back again.. I know its a dumb question but matters to me most cuz I can't spend again 30grands buying it...
mechanical engineer
Pls answer me.. I ve downloaded the pd918.zip file and I ve put it in root of SD card... Now I ve s-off. And when go into bootloader screen it analyses the image ask me to update... So am I eligible to do the downgrade process without having temproot...
mechanical engineer

Categories

Resources