Related
All,
I have this small issue with my HTC Desire and the Parrot CK3000 Evolution. Until now, everything works perfectly (calling, sending contacts, voice dialing, ending calls,...)
However I have one small issue. When I enter my car, and my phone is locked, the Desire will not pair with the Parrot. From the moment I activate the screen, pairing is done within a few seconds. I already tried to leave it there for half an hour, no pairing, touched the screen, pairing within a few seconds.
It looks to me like the bluetooth is not active / alive when the phone is locked (or in sleep). From the moment the pairing is done, everything works fine, also when the phone is back in lock / sleep.
Anybody has anything similar or has a solution for this? I searched the market for some kind of Bluetooth-keep-alive application, but could not really find it...
Thanks in advance,
Best regards,
Speedygerre
Small bump, nobody any idea for a solution or somekind of workaround / app?
-------------------------------------
Sent via the XDA Tapatalk App
I have a similar situation with my Audi A5 (factory BT kit).
It will connect when the phone is locked (screen off etc) but it can take anything from 1 to 10 minutes before it does connect.
Like yourself, my Desire connects immediately if the phone is not locked.
Strangely, it appears to work OK in my Mazda MX-5 which has a Kenwood DNX8220BT system (Bluetooth, SatNav, Ipod, coffee maker etc) - and the Bluetooth is a Parrot system. Having said that, I haven't used the MX-5 much since I got my Desire so it might not be a representative sample.
There is definitely something amiss though.
I have a Parrot CK 3100, and whilst I am happy to report that I do not have the same problem as you, I did have a problem syncing my contacts.
Check out this site, and download the software to udate to the latest firmware. You will need a laptop with either built in bluetooth, or a seperate bluetooth dongle.
http://www.parrot.com/uk/support/onlinehelpguides
I updated the firmware on mine, and now my contacts sync properly.
There is a good chance that updating could fix your connection problem as well.
Sorry forgot to add, that updating the kit really is a doddle, but their software is Windows 32bit ONLY and definitely no MAC!
Thans pergolesi, I hope your suggestion workshop, I will try it when I have some time one of the next days.
However I still think it has something to do with the Desire, since syncing workshop perfectly when Desire is not locked...
-------------------------------------
Sent via the XDA Tapatalk App
I don't know about the Bluetooth but I know my wifi deactivates after about 5 minutes when it's locked even though I have it set to never turn off. Maybe the Bluetooth is doing the same.
Perhaps not much help, but I sometimes play music from my Desire on my car headunit using Bluetooth streaming, and that continues to work fine when the screen goes off and the phone is locked. It also still responds to commands from the headunit (skip, pause, etc).
Once it's connected, everything works OK for me as well, it just is the connecting moment which apparently does not always work
REB1 said:
I have a similar situation with my Audi A5 (factory BT kit).
It will connect when the phone is locked (screen off etc) but it can take anything from 1 to 10 minutes before it does connect.
Like yourself, my Desire connects immediately if the phone is not locked.
Click to expand...
Click to collapse
Can I ask what year your A5 is? I've got a 2010 A3 and BT doesn't work properly with my Desire I can get it to pair, but then it will disconnect a few minutes later and the only way to reconnect seems to be to unpair/repair or switch the car off/on. When it IS working it can make calls, etc. fine - but I just can't get it to stay connected I tried my Audi dealer but they just said it's not on the Audi list and there's no update to support it, so interested to hear you got it working on your A5.
alanjrobertson said:
Can I ask what year your A5 is? I've got a 2010 A3 and BT doesn't work properly with my Desire I can get it to pair, but then it will disconnect a few minutes later and the only way to reconnect seems to be to unpair/repair or switch the car off/on. When it IS working it can make calls, etc. fine - but I just can't get it to stay connected I tried my Audi dealer but they just said it's not on the Audi list and there's no update to support it, so interested to hear you got it working on your A5.
Click to expand...
Click to collapse
My A5 is a 2008 model with SatNav and therefore MMI High. The Desire paired straight away with no problems and both the car and the phone remember each other - it just takes awhile sometimes for one or the other to realise it and connect.
I'm pretty certain that it is the phone that has the problem as I had no such problems with several Sony Ericsson phones previously.
REB1 said:
My A5 is a 2008 model with SatNav and therefore MMI High. The Desire paired straight away with no problems and both the car and the phone remember each other - it just takes awhile sometimes for one or the other to realise it and connect.
I'm pretty certain that it is the phone that has the problem as I had no such problems with several Sony Ericsson phones previously.
Click to expand...
Click to collapse
Thanks - interesting. I wonder how many different BT stacks Audi run - I was hoping they'd share some common code and therefore be updated quickly but it sounds like this isn't the case given that it's working fine on your A5. Thanks for the info though!
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
e-thug said:
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
Click to expand...
Click to collapse
Hmmmm .... I don't believe you ever stated what type of headset you are trying to get working here? I find your problem to be very strange, even though WinMo does seem to be lacking in a lot of different areas, audio streaming via bluetooth stereo headset is definitely not a problem I have encountered. It even streams flawlessly through my 5.1 hooked to my pc via a crappy 8 buck bt dongle and still sounds excellent. Have you considered that the problem may lie with your bt headset itself?
Also, when you say that you installed latest "release" from AT&T (from a thread on this site), what exactly do you mean? I am running the "unofficial" leaked rom from AT&T on mine and I just paired my Motorola S9 stereo headset and it is playing great for me. You also may want to try using some different software, give S2P (Slide 2 Play) a try and see if you have different results. That's what I am using right now, but I have used TCPMP to play a few xVids through my headset and have had no problems.
The problem is not in the head unit. 25 other phones can't all be wrong. I have no problem using my bluetooth headset. That is probably why you don't see the problem. Anything more complex than a headset will not work with this release. The problem lies within the phone as soon as it displays a notification (which, of course I cannot disable) which reads, "The connected Bluetooth headset does not support volume adjustment from the device. Adjust volume on the headset itself."
That message is the kiss of death. So basically any Bluetooth head unit will not work with this phone? Sounds like shoddy programming to me. Yes, I am using the "leaked" release. I really don't think this release will ever see the light of day. Its horrible! You cannot disable notifications (I don't need to know when my text messages were sent successfully), and it looks like whenever I get a system notification, any program I am using crashes immediately. Like I said before, as soon as I get a notification, I lose the Bluetooth connection (which is like a split second before the notification comes up). I highly doubt this "leaked" copy will ever see the light of day, officially (unless AT&T and HTC do absolutely zero testing on it).
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
My Tilt 2 works absolutely fine with all my BT devices, including 2 Motorola headphone sets and my Sony Xplod head unit in my truck.
e-thug said:
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
Click to expand...
Click to collapse
I was mis-understanding you about the head unit, I did think you were talking about a headset. Sorry bout that, my Mustang doesn't have built-in BT so I have to use a Motorokr t505 for those chores. It works well but it does give me the same message that you are getting about "volume can't be cotrolled etc" but I can dismiss it and carry on without any problems.
but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
Click to expand...
Click to collapse
Since you don't need your phone for calls, just get Sirius or XM. Ya know, considering you only stream music through the phone..
Did you try the BT headset or head unit with the original stock ROM before you flashed the "leaked official" ROM?
Seems like you might have a couple random issues, with the BT issues and the system notifications crashing programs. I haven't flashed the leaked ROM, but I do know that many random issues with cooked ROMs can often be cleared up by running Task29, which completely wipes the phone memory before you flash a new ROM. I think you will need to HardSPL before you run Task29. Might be worth a try, sometimes fragments of the old ROM interfere with the new one, and cause some bugs.
Bluetooth protocols can be implemented differently by different manufacturers.
I know of many people including myself who have NO PROBLEM with the tilt 2 and different Bluetooth products INCLUDING car radios.
I am using the "new" AT&T ROM and have no difficulties.
Clearly your pissed but your subject is wrong. I would suggest changing to "Worthless as $HIT to ME"
I think my problem is that I am getting notifications which seem to be killing my connection. Is there a way to turn all notifications OFF? The only ones I care about are missed calls, incoming SMS and maybe a birthday. I would like to try to kill the notifications first because I think this may solve my problem
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/06/24/enable-or-disable-the-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/06/24/tweak-and-configure-how-notifications-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
redpoint73 said:
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/...he-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/...cations-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
Click to expand...
Click to collapse
Thanks I will try these out and report back
For the record my head unit is a JVC KD-BT11 and I have never had any kind of problem pairing any other phone
Somebody else just posted a very similar issue, and found the app hAndyUtils to be helpful:
http://forum.xda-developers.com/showthread.php?t=741311
I think hAndyUtils might just be a app-based way to make the reg edits I posted earlier. But give it a try.
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack. (Just as an aside, on all my past phones, there were people bemoaning the the fact that it had MS, and trying to replace it with the Widcomm, so I am getting a real chuckle out of folks complaining about the Widcomm and wishing for MS )
In any case, the utilities (Blue music toggle etc...) that used to work for me to toggle between streaming in stereo and plain phone qulity no longer work. However, all my stereo headsets (I own three different brands/pairs) all work perfectly with the Tilt 2. And stay connected and streaming all day.
By the way, coming on a forum that is full of people helping each other and using profanity, anger and threats, is not the most conducive way to get your questions answered. The odds are that the problem you are having is already solved somewhere among the 6+ million posts in this forum. I do not know where or I would post it for you, but it is probably out there. Good luck. And if you find it, please post the link to the answer back here so that other serchers will find it too.
maybe it can come from the phone itself
i had a rhodium for almost a year and never got my motorola headset ht820 to work well enough for me to use it... (more skips than music...cant move my head without a skip)
i flashed to a NRG rom before trying my headset...i tried eveything as far as ref setting, different radios...even flashed my ht820...
no improvement...
then my phone fell in water not so long ago...got another rhodium same model (european)...and it worked perfect out the box on stock rom i can go in a different room than my device and still hear music with no skips...and it still does with nrg rom and latest radio...
so my guess is maybe some actual devices have bad bluetooth hardware ???
I have the Motorola S9 and the HT820 and both work absolutely fine on my Tilt 2.
yatrg said:
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack.
Click to expand...
Click to collapse
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
e-thug said:
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
Click to expand...
Click to collapse
Did you ever try the solution in this thread? It fixed a lot of issues people were having with bluetooth car kits. Maybe it will work for you: http://forum.xda-developers.com/showthread.php?t=591322
The solution source is here: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
And here is the solution. You need a registry editor to do this:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change (or add if not there) DisableReopenAudio to 0 (default is 1)
3. Reboot device
You may also want to do the A2DP quality registry edit: Add a DWORD value of LineSpeed to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
Give it a try, it may work for you.
I will give this a try and report back. Thank you very much for the response!
No luck. And my bdaddr keeps resetting to a binary value when I reset the phone
After searching this forum there is no thread on Bluetooth issues connectivity.
For a wile now i been searching the net and different sites for a fix between my phone and my car bluetooth. Before the epic i had a windows phone and the connectivity was fine including all the phonebook would load up and everything the system was build to do. With Android Epic i been having issues. Sometimes I cant connect to the car and other I am able to connect but phonebook wont load.
With all the Geniuses in the website i am sure someone can come up with a fix.
I figured i open this thread hoping we can find a final fix to retire this problem.
If it helps I am running the latest Viper Rom with Genocide kernel at 1.2ghz
However the rom did not change the statues of my issue.
Any help would be appreciated.
Thanks
I also have connectivity issues with bluetooth, in my case the car has A2DP allowing for music to be played over the car's stereo. It cuts out so much that it is completely useless for music. I mostly listen to podcasts but Pandora would be nice. However it cuts out so much that it isn't worth it. So if anyone does have a solution. To me though I've tried so many kernels, and roms to no avail that I'm pretty sure taht the software Samsung has shipped has faulty drivers. By the way it also seems that the cut outs occur when switching towers, however I could be wrong.
I use this in my car: http://us.kensington.com/html/14484.html
It may cut out every 45 seconds or so but it's the only thing I've used. Got it on sale for $20.
I've got a pair of a2dp bluetooth headphones that I use to listen to podcasts via my Epic. I've had zero problems with those (using DK28 atm, for the record). So I don't think there's a hardware problem with the Epic's bluetooth.
If we're going to get some troubleshooting done, we should get a bunch of details from everyone. Like exactly what bluetooth hardware they're using, and what roms they're running.
thezero4 said:
I also have connectivity issues with bluetooth, in my case the car has A2DP allowing for music to be played over the car's stereo. It cuts out so much that it is completely useless for music. I mostly listen to podcasts but Pandora would be nice. However it cuts out so much that it isn't worth it. So if anyone does have a solution. To me though I've tried so many kernels, and roms to no avail that I'm pretty sure taht the software Samsung has shipped has faulty drivers. By the way it also seems that the cut outs occur when switching towers, however I could be wrong.
Click to expand...
Click to collapse
Does everything cut out, or just Pandora? If it's just Pandora and other apps that need data connection, it might not be a bluetooth problem as much as a data connection problem.
I would suggest testing it by trying the car bluetooth with something that requires no data connection at all, like pre-downloaded podcasts.
I am talking about connectivity issues with in stock car bluetooths.
this problem is big many people been having this issue and there is a list of stock bluetooth cars that android wont pair with. I had the touch pro 2 for sprint with windows system and it worked fine in my car bought the epic and there we go. Now looks kind of bad that i would need to get an aftermarket piece to listen to bluetooth calls and load up the phonebook from android to my car.
Windows got it right even though i would never go back to a windows phone so i know there is something that android messed up here
Below i will put some links to show you how there is A LOT of people that been having this issue.
http://code.google.com/p/android/issues/detail?id=3960
http://www.google.com/#q=android+bl...start=0&sa=N&bav=on.1,or.&fp=3f40f95b1b9c7c0d
I have a 2006 Dodge Durango. It has Bluetooth. My old phone, a Samsung flip phone would connect without issue. My new phone, a Samsung Captivate, will connect most of the time, but often times, once it connects, it drops the call.
I understand this is an Epic thread, but I thought I would add my input as I am having similar problems (and this came up on my search).
If I understand you correctly, you connect some of the time and sometimes not.
Regardless, if your phone is rooted you might wanna try this.
I had a lot of issues with my bluetooth after upgrading to froyo and tried a lot of fixes including wipe3x and odin to stock....this is the one that worked for me.
http://forum.xda-developers.com/showpost.php?p=12120496&postcount=1392
Ensure that you first
- delete the car from your phone,
- delete the phone from your car,
- disable bluetooth,
- delete the file,
- CHANGE YOUR BLUETOOTH DEVICE name,
- restart,
- reenable bluetooth
- re-pair your phone with the car.
I'm thinking of upgrading to this phone, one of the main reasons is that my current device, which has galaxy S guts, is not compatible with most bluetooth devices. I like to use an app called blueputdroid that turns my phone into a universal keyboard as well as an ELM bluetooth device that turns my phone into a dyno along with the torque app for my car.
For some reason the way samsung built the bluetooth makes it not work with a lot of these things, I know it's not the apps or 3rd party devices as I use my old G1 now for it, but would much rather just have my main phone be my one device.
Have any of you tested blueputdroid or any bluetooth devices? If not could someone try out blueputdroid with this phone (it's free in the market) any help would be much appreciated thanx!!
Says it has detected unsupported Bluetooth stack.. Install cyanogen Rom, etc.
Thanks, at least this phone is likely to get cyanogenmod support which will fix the problem my SK sure as hell won't
My GS2 works perfect with my ELM adapter. It worked perfect with my Vibrant too. I've never had a single problem with any bluetooth device on either of them.
I've had a lot of bluetooth problems with both my vibrant and now my GS2. Both work reliably with my wife's mini cooper bluetooth but they both have had problems connecting to the garmin nuvi I use for handsfree in my car (and forget about the A2DP on it).
I tried a lot of roms on my vibrant (incl stock) and they did lots of cool stuff but never made the BT connect reliably. Then I came across this thread: http://forum.xda-developers.com/showthread.php?t=795691
I made the suggested change to /system/etc/bluetooth/audio.conf and voila! I finally have good BT with my vibrant.
So I got my SG2 last week, rooted it and found that it also had the bad settings in /system/etc/bluetooth/audio.conf. However it also lacked BLN (backlight notification) and few other tweaks I've come to love on my vibrant so I flashed juggernaut 2.6. That fixed all the major foibles with the SG2 but it still won't reliably connect to my garmin.
I opened up the filesystem to find that /system/etc/bluetooth/audio.conf is no longer there! Does anyone know where it went?
Apparently I don't have enough posts to ask in the dev forum where juggernaut was posted http://forum.xda-developers.com/showthread.php?t=1322642 so I'm hoping someone will see this plee for help.
thanks
the phone has BT 3.0, but it is backward compatible with BT 2.0 and 1.0 devices
i haven't had any trouble using it with my car deck (streaming audio & phone), my large collection of stereo BT devices, and other BT enabled phones & PCs/Laptops
the remote control feature from the stereo headsets works properly, for fast forward, backward, play, pause, talk, mute, etc
the only thing i have yet need to test BT on is with a BT smart wrist watch
I have probably not so unique situation.
My Honda allows for calling via bluetooth but not audio streaming. I use an old Blackberry Gateway for that which works perfectly when I had my Samsung S2.
With the Note, the BB Gateway connects and streams audio fine but the car cannot maintain a constant connection at the same time.
I use A2DP volume (which is pretty awesome for free) to force connection attempts. If the BB gateway is not connected, the car maintains its connection. It seems the Note2 cannot do both.
Does anyone have similar problems or a work around? Or maybe know if the new leaked update fixes this? I heard it does update something about BT...
I'm stock rooted BTW
scoobmd said:
I have probably not so unique situation.
My Honda allows for calling via bluetooth but not audio streaming. I use an old Blackberry Gateway for that which works perfectly when I had my Samsung S2.
With the Note, the BB Gateway connects and streams audio fine but the car cannot maintain a constant connection at the same time.
I use A2DP volume (which is pretty awesome for free) to force connection attempts. If the BB gateway is not connected, the car maintains its connection. It seems the Note2 cannot do both.
Does anyone have similar problems or a work around? Or maybe know if the new leaked update fixes this? I heard it does update something about BT...
I'm stock rooted BTW
Click to expand...
Click to collapse
I'm having the same problem. I have a 2006 Pontiac GTO with a Kenwood touch screen and my Note 2 will connect fine, and it will stay connected with no issues until I switch to another playlist, artist, or song. That's when it seems to just disconnect itself and then, about 30 seconds later, reconnect itself.
I've tested this on stock unrooted (LJ1 and LJC), stock rooted (LJC and LK8), Jellybomb v10.2 and v11 (LJC), and H20 beta's 2.1 and 3.1 (LK8) with no luck. I also just recently started trying to use A2DP volume and it definitely helped with displaying the correct song name, artist and album (it wasn't changing when the song would change prior to using A2DP) so it's definitely an improvement but...
Considering how much I drive and how much I LOVE music this is becoming an area of major concern. If any of the amazing developers, or anybody for that matter, has any words of wisdom, suggestions, fixes, etc. it would be HUGELY appreciated.
That_Guy0505 said:
I'm having the same problem. I have a 2006 Pontiac GTO with a Kenwood touch screen and my Note 2 will connect fine, and it will stay connected with no issues until I switch to another playlist, artist, or song. That's when it seems to just disconnect itself and then, about 30 seconds later, reconnect itself.
I've tested this on stock unrooted (LJ1 and LJC), stock rooted (LJC and LK8), Jellybomb v10.2 and v11 (LJC), and H20 beta's 2.1 and 3.1 (LK8) with no luck. I also just recently started trying to use A2DP volume and it definitely helped with displaying the correct song name, artist and album (it wasn't changing when the song would change prior to using A2DP) so it's definitely an improvement but...
Considering how much I drive and how much I LOVE music this is becoming an area of major concern. If any of the amazing developers, or anybody for that matter, has any words of wisdom, suggestions, fixes, etc. it would be HUGELY appreciated.
Click to expand...
Click to collapse
I'm having similar problems with certain roms. Only my truck is a Chevy not Honda. Using blackberry audio gateway. The "Note Card 2.2" rom works perfect for me, along with JellyBomb. I didn't like JellyBomb. I want to switch to another. I need to spend time and found out what is different between the working and non-working Roms. I had the same problem with my EVO 4g. Some Roms worked perfect, others acted up.