Develop Bugs

Stuck at 28% help needed

Stuck at 28% of upgrade
phone is showing 4 colors and does nothing
PLEASE PROVIDE LINK TO BE SAVED
LINKS AND INFO WHAT TO DO IN DETAIL
I AM NOT A COMPUTER GUY

flash official rom back. Then download this rom
http://rapidshare.com/files/42141641/Wm6_Official.zip
and flash that one,

link for official rom ?
i remind you the phone is at the 4 colors mode

this page has all official roms ever made for trinity
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades

pkaza said:
link for official rom ?
i remind you the phone is at the 4 colors mode
Click to expand...
Click to collapse
Don't panic, the phone is not dead. You will get it fixed. Just follow the instructions given, there is a solution.

updated with official rom
hardspl does nothing
other way
?

Help me too!!! I don't even have an official ROM for my Orange m700

ward777 said:
Help me too!!! I don't even have an official ROM for my Orange m700
Click to expand...
Click to collapse
You could try this fix http://forum.xda-developers.com/showthread.php?t=316313&page=5

I don't think so. My Hard-SPL was overwritten and now has the 3.0 version and not SPL version 9.99.

9.99 is NOT Hard-SPL, it's Des's Crashproof spl which is not even trying to prevent itself from being overwritten.

OliPro?
Hello
What about OliPro SPL-1.20.Olipro with IPL-0.5
Can it also be overwritten or wich hard spl do I need first to flash?
Roman

don't worry , simply follow the instruction and reflash it again with the new rom , then it will pass through the 28% ...

Shadowmite said:
9.99 is NOT Hard-SPL, it's Des's Crashproof spl which is not even trying to prevent itself from being overwritten.
Click to expand...
Click to collapse
I know that
But I did have Hard-SPL and now it's gone so it will get overwritten when installing this ROM as well

tony800708 said:
don't worry , simply follow the instruction and reflash it again with the new rom , then it will pass through the 28% ...
Click to expand...
Click to collapse
What instructions?

ward777 said:
What instructions?
Click to expand...
Click to collapse
I guess you're in a pickle. There must be a way around not having an official Orange rom. Have you tried the SD card method from an Orange rom dump? Otherwise, the rom cookers should be able to come up with something. With all of these people trying these roms certainly you must not be the only one with an Orange phone. Good luck .

Hi Guys,
I am also stuck @ bootloader. I have the original rom, but how do I flash this back? It keeps on telling me that it cannot detect the phone. What can I do? Thank you!

You can flash the spl from the bootloader via mtty, but that's not something Ive seen clear instructions on how to do... you might want to log into #xda-devs in freenode IRC and get stepped through it.
If you're stuck at the bootloader, just try running the hard-spl flash right from there...

ward777 said:
I know that
But I did have Hard-SPL and now it's gone so it will get overwritten when installing this ROM as well
Click to expand...
Click to collapse
Yeah, I thought deleting 'SPL.nbh' would prevent the RUU from installing the new SPL but the Hard-SPL got overwritten on flashing.
Kris

there are 2 spl entries in the release... spl.nb and spl.nbh... you have to remove both. also I'd remove the ipl.nb...

These are the files inside the exe:
EnterBootloader.exe
ErrorBattery.fig
ErrorUSB.fig
ModelID.fig
rapitool.exe
README.doc
ROMUpdateUtility.cfg
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
RUU_signed.nbh
SPL.nbh
I suppose you meant to remove the .nb entries inside RUU_signed.nbh
Kris

[HELP]HELP!!!!!

I Have Got An Orange Uk Diamond And Have Been Trying To Upgrade From Rom 1.37.405.1 Wwe To 1.93..... But Was Unsuccesfull. I Have Got Few Questions.
1. Is It Possible To To Do It(1.73 Rom To 1.93)
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
I Maybe Asking For Too Much Here.
And Sorry Guys For The Newbie Questions. As It Might Have Already Been Answered A Million Times. I Just Couldnt Find Them.
Thanks In Advance.

When You Type In All Caps It Makes Your Words Normalised But Every Word Has A Capital Letter
Just In Case You Wanted To See Who The Idiots Were

yuv said:
I Have Got An Orange Uk Diamond And Have Been Trying To Upgrade From Rom 1.37.405.1 Wwe To 1.93..... But Was Unsuccesfull. I Have Got Few Questions.
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
I Maybe Asking For Too Much Here.
And Sorry Guys For The Newbie Questions. As It Might Have Already Been Answered A Million Times. I Just Couldnt Find Them.
Thanks In Advance.
Click to expand...
Click to collapse
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.

Since you're not giving any details I don't know what your exact issue is. It depends on your Phone and where you got it.
Most likely your issue can be resolved by reading the thread which I link to in my signature.

daleski75 said:
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
Click to expand...
Click to collapse
If you HardSPL you wont be able to install a standard HTC ROM without some faffing, I had this problem this week, so if your 1.93 is the released Standard OEM HTC one then dont HardSPL whatever you do.

thanks alot guys. what a quick response. and sorry for the caps lock if it got u confused.
as far as the details of the phone is concerened. its an orange UK contract phone with the ROM version 1.37.405.1 WWE radio 1.00.25.03. the phone hasnt been flashed at all. i did try to flash it to _QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe but was unable to. i guess i should have hard spl it before.
i m guessing the only thing i need to do is to hard spl it right. or do i need to do something else as well.
again thanks alot guys for the quick responses.

hi tony.
i have actually tried to do it without hard spl but it would get stuck on 1%. is there any other way to do it. i believe the ROM i m trying to flash to is an official one as far as the thread i downloaded it from is concerend.

one thing to clear here. its the first time i m trying to flash from 1.37 to 1.93 official rom. could someone confirm that there is a 1.93... official rom available or is it one of the cooked ones. and could one confirm as well that i need to hard spl even flashing from oficial to official rom. coz two post before tony mentioned not to hard spl.
any ideas guys. thanks

Here's what I've just done, I hope it helps -
Vodafone UK to UK release HTC ROM.
1. I read the info here, over and over and asked lots of questions.
2. I checked the current SPL of my fone (Volume Down & Reset) and found I had 1.37.
3. Downloaded Hard SPL 1.37 UnSigned and installed it - Here was my first problem. Everyone just says use RUU to install hard SPL however the SPL's I downloaded didn't come with RUU so I took a guess and decided that RUU was a generic flasher which could also flash the SPL for me.
4. Use RUU to flash the SPL, mine reported V1.0 as the new ROM version but installed and rebooted perfectly to reveal the coloured screen informng that I did now have a Cooked SPL installed.
5. Followed the fisrt startup procedure that the phone asked me to do.
6. Flashed the new ROM in a similar way to flashing the Hard SPL.
7. Phone flashed ok and I'm just in the process of setting it up now.
One issue I did have was using Vista I had to right click and run as Administrator to make it work.

tonyb15re said:
If you HardSPL you wont be able to install a standard HTC ROM without some faffing, I had this problem this week, so if your 1.93 is the released Standard OEM HTC one then dont HardSPL whatever you do.
Click to expand...
Click to collapse
wrong. if you use unsigned hardspl (aka "developer hardspl") it will flash HTC ROMs just fine
1.93 is also unsigned.

vrstu said:
3. Downloaded Hard SPL 1.37 UnSigned and installed it - Here was my first problem. Everyone just says use RUU to install hard SPL however the SPL's I downloaded didn't come with RUU so I took a guess and decided that RUU was a generic flasher which could also flash the SPL for me.
Click to expand...
Click to collapse
who's "everyone"? this information is totally wrong, wrong, wrong.
next time you download an attachment from a post, read the post where the attachment was, and you won't have this problem (the post that had the unsigned hardspl 1.37 also talked about where to get the special SSPL RUU for it - have a guess. it is in the same post in another attachment).

Thread has been closed due to maintenance of the forum. If you want it reopened, PM a MODERATOR!

Please Really Need Help for Flashig / Upgrading

Hi!
I am totally new to HTC Diamond. I got my set from England (Orange). It was locked. I was able to unlock it with the free solution available. Ok. Now the problem is I heard about TouchFLO but it I can't seem to activate. What can be the reason and what can I do?
Second, mine says it has :
ROM Version: 1.37.405.1 WWE
Radio Version: 1.20.OliNex
IS it ok. Or can I get a new more better version. Whats with radio version? Please guide me what can I do? I right now have no idea. I tried the tutorials as well but I am confused.

thats not the radio version, thats the SPL (Service Provider Lock).
and its a Hard SPL, which i presume you flashed to 'unlock' it.
the Hard SPL lets you flash a different ROM (but voids your warranty) it doesnt SIM unlock it tho.
TF3D (Touch Flo 3D) should run automatically when the phone is started, if it doesnt, go to Start> Settings> Personal tab> Today> Items tab and make sure "TouchFLO 3D" is checked.

Old ROM
thornofcarrion said:
Hi!
I am totally new to HTC Diamond. I got my set from England (Orange). It was locked. I was able to unlock it with the free solution available. Ok. Now the problem is I heard about TouchFLO but it I can't seem to activate. What can be the reason and what can I do?
Second, mine says it has :
ROM Version: 1.37.405.1 WWE
Radio Version: 1.20.OliNex
IS it ok. Or can I get a new more better version. Whats with radio version? Please guide me what can I do? I right now have no idea. I tried the tutorials as well but I am confused.
Click to expand...
Click to collapse
The ROM version you're showing here is really old (as ROM's go!). You can get a link to the latest Orange ROM (v1.93) here, or flash one of the superb cooked ROM's in this forum

grahamkdt said:
The ROM version you're showing here is really old (as ROM's go!). You can get a link to the latest Orange ROM (v1.93) here, or flash one of the superb cooked ROM's in this forum
Click to expand...
Click to collapse
Thanks a lot. But flashing with v1.93 will not do anything bad with the set. I once tried to upgrade my Imate jamin and it went dead and was not repaired. So I am a little hesitant you know.

you have already voided your warranty by flashing a Hard SPL. i would suggest flashing it back to the original, then flashing the latest Orange ROM (its not supposed to be too bad).

mugglesquop said:
you have already voided your warranty by flashing a Hard SPL. i would suggest flashing it back to the original, then flashing the latest Orange ROM (its not supposed to be too bad).
Click to expand...
Click to collapse
Thanks a lot. Could you please further tell me how to flash it.

read the tutorial in the stickie.
lots of reading

Thansk. Just tell me which is the latest and best version that I should use?

did u even look at the other threads? ....
4 threads down from yours:
http://forum.xda-developers.com/showthread.php?t=457980

Ok ok man. i got it myself without looking them thanks. But now I have this problem that messages are not being sent. i tried soft reset and hard reset but no avail. What could be the reason for that? B
By the way I upgraded it with 1.93 flash given above in this thread.

Try the new 2.00 ROM.
You can also try one of the smaller lite ones
(Swtos, Panosha), each time followed by a HARD reset (backup your Internal Storage data first).
If THAT doesn't work, you might have an SMS configuration/operator issue.
A.

messages not sent
make sure you have set the phone to your service provider....in connections

Urgent! My diamond has hardware problem and need to fallback to stock ROM and SPL.

Hi,
My Diamond has no response on the screen, so I think I need to return to factory for repairing. However I have difficulties in falling back to stock ROM and SPL.
From the Wiki:
---------------
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
...
-----------------
I can't flash my ROM to latest HK WWE CSL ROM (2.03) as it just stopped at 0%. I'm using SPL-1.30.OliNex.
Questions:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
1) Should I flash to v1.93 (the very beginning of the ROM)?
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
3) Anyone can give me a reference on the step-by-step in details...
Thanks!
Please help...
F810

Questions:
f810 said:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
Click to expand...
Click to collapse
If the latest was the offical from the site then you could use that - as you are having issues flashing this with 1.30 HSPL, I would suggest updating that to 1.40
f810 said:
1) Should I flash to v1.93 (the very beginning of the ROM)?
Click to expand...
Click to collapse
This might be a easier option and should work woth the 1.30 HSPL
f810 said:
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
Click to expand...
Click to collapse
This is recommended
f810 said:
3) Anyone can give me a reference on the step-by-step in details...
Click to expand...
Click to collapse
Its really straight forward like the WiKi suggests
This Thread may help

Thanks a lot.
Re Q3, so do you mean if I extracted the stock NBH, it's only OS but not including RADIO? If so, I will get the RADIO from wiki page later. Would you please clarify for me?
After your information, I think the steps in Wiki are clear. Thanks.

If this is HK ROM is the one you have downloaded from HTC PAGE then it has a radio included

Since my Diamond is totally malfunction in the touch screen, I can't response to all the confirmation & prompts...
I've failed to install Stock ROM and tried your recommendation on upgrading to HSPL 1.40. There was a confirmation on running the program in my Diamond and I can't press YES and now my diamond is just like bricked.
I've also tried pressing VOL DOWN + Reset to connect the Diamond via USB. The ROM Update Utility has "successfully" update the HSPL, but actually when I hard reset it and found it's still running 1.30... Can I just use this approach to fallback to Factory status??
Anyone has good idea on how to fallback to Factory Stock ROM, RADIO and SPL, provided that my screen has totally no response to me?
PLEASE...PLEASE...PLEASE help.

You will not be able to update olipros Hard SPL in bootloader mode as the SPL is protected and the 1.30 will prevent this although show its been done.
What you will need to do then is just load a 1.93 ROM from boot loader. the were some in that link i posted earlier. as to reverting to the default SPL - you may be luck not to need the screen for any confirmation. but running a new SPL to overwrite Oli's you will need to use windows and the RRU

I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!

Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.

band27 said:
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
Click to expand...
Click to collapse
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?

Here you go....I did a search

Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!

Read this............Scroll to Post #39
http://forum.xda-developers.com/showthread.php?t=400950&page=4

band27 said:
Here you go....I did a search
Click to expand...
Click to collapse
I also got that but it's not win32 program... I believe it's running on the Diamond. But I've hard reset, and never able to setup as it's screen was not functioning now...

kawatsu said:
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Click to expand...
Click to collapse
That ROM had a different boot image - so you need to replace that by flashing another splash .NBH file using RUU.
Original splash can be found HERE
and if needed CUSTOM RUU HERE
Just un-zip these and put the splash file in the same folder as the Custom RUU and run the RUU - the flash should take a few seconds and viola - bye bye Diamond project splash.

f810 said:
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Click to expand...
Click to collapse
I think as long as the SPL is changed and the ROM is of the original language the I think it should be OK to send back like that

f810 said:
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Click to expand...
Click to collapse
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.

Which is the original SPL?? 1.23, 1.34 or 1.37? I do recall taking a picture of the original SPL when i 1st got the Diamond for days like that but i just can't find it now
I'm bought it from Malaysia. Anybody can help me confirm this??

R3PUBL1K said:
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Click to expand...
Click to collapse
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?

f810 said:
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
Click to expand...
Click to collapse
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...

f810 said:
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
Click to expand...
Click to collapse
Can anyone help??

Flash Mod of Original Rom Without HardSPL?

I searched the various forums but did not find an answer, so pardon me if this has been asked somewhere.
I don't use sense (I prefer SPB Mobile Shell), so I wanted a ROM without Sense. I cooked up one without the Sense 2.1, with the new GoogleMaps instead of the old one in the ROM, and with CF 3.5 instead of the older version. That is really all I want from a ROM; my stock ROM works well, I just wanted to recover the storage space used by Sense 2.1.
Here is the question. I cooked this ROM based on the Official T-Mobile US ROM (Jan 2010), and only made the few mods above. Since my device currently has the official ROM that I used as a baseline, can I flash without installing HardSPL?
BTW, the .nbh file is about 13K smaller than the stock nbh.

I don't think so, because your ROM won't be "signed" correctly. You will still need HardSPL.

steviewevie said:
I don't think so, because your ROM won't be "signed" correctly. You will still need HardSPL.
Click to expand...
Click to collapse
Would it hurt to try?

stevedebi said:
Would it hurt to try?
Click to expand...
Click to collapse
If you try and it doesn't work, the worst thing you should end up with is an error message. If you take a look in the HardSPL sticky/WiKi you'll see that you can reflash the stock SPL if you need to, so don't stress too much if you have to HardSPL the device.

stevedebi said:
Would it hurt to try?
Click to expand...
Click to collapse
The SPL aka Bootloader aka what loads the ROM onto your device requires all NBH files to be signed with a private key that only HTC have. Without that you need Hard SPL to bypass it.
You can try, but it won't work.
You can Revert to your Stock SPL after flashing the custom ROM if you want, the ROM will still run.
Dave

Thanks for the replies
Thanks to all who replied. I guess I'll go ahead and hardspl.But now the problem will be how to keep myself from trying out all those ROMS!

stevedebi said:
Thanks to all who replied. I guess I'll go ahead and hardspl.But now the problem will be how to keep myself from trying out all those ROMS!
Click to expand...
Click to collapse
You can't that's the lure of XDA .
Just join ORD now and have done
Dave