I've just taken delivery of a case-mate tough case for my One X after having them previously fitted to my Desire and Sensation. They have always fitted really well, felt good and grippy and offered good protection. This one however feels cheap and non grippy and after fighting with it for five minutes I gave in trying to get it to sit right on the phone. It just plain doesn’t fit! So I’ve printed out my return postage label from Amazon and will send it back for a refund. Very disappointing but the question is, what do I replace it with? Has anyone else had a similar experience with the tough case on their One X and are there any other good alternatives out there?
Bump: It can't just be me surely?
Amazing, so it would seem that i'm the only person in the world that thinks the tough case for the One x is rubish compared to previous versions! Either Amazon are selling cheap Chinese fake's or case-mate quality has gone down the pan...
I tried the tough and also the pop yesterday. Tough case was cheap and tacky but the pop was terrible. Once on the phone it is a nightmare to remove and you risk damaging your device. Review of the pop on WWW.mobilemaduk.Co.uk
Sent from my HTC One X using Tapatalk 2
I have the same case and find it perfect to be honest…. Sure its not a fake? (if they even exist)
Got mine from a hight street store though, Amazon marketplace can have fakes on it.
Its snug fit, takes seconds to take off and put back on. The buttons work well and are covered well. The fit between the rubber and the hard shell is spot in, cant tell its two peices to be honest.
Steve
Tomo1971 said:
I have the same case and find it perfect to be honest…. Sure its not a fake? (if they even exist)
Got mine from a hight street store though, Amazon marketplace can have fakes on it.
Its snug fit, takes seconds to take off and put back on. The buttons work well and are covered well. The fit between the rubber and the hard shell is spot in, cant tell its two peices to be honest.
Steve
Click to expand...
Click to collapse
Thanks for the info Steve, i suspected it may have been a fake to be honest.
My previous tough cases fitted really well as you say, this one was really poor.
One question for you, both my previous ones had a date wheel molded in to the silicone and the outer shell, this one didn't. Does yours?
There are a few threads and reviews about casemate tough in the accessories section.
You might want to have a look there.
rwleigh said:
Thanks for the info Steve, i suspected it may have been a fake to be honest.
My previous tough cases fitted really well as you say, this one was really poor.
One question for you, both my previous ones had a date wheel molded in to the silicone and the outer shell, this one didn't. Does yours?
Click to expand...
Click to collapse
No date wheel on either… but has CaseMate on the inside of the silicone (bit that touches the phone)
Steve
Got a casemate from carphone warehouse when I bought my one x. It was a struggle to fit without breaking the device through pressure. Once it was on I found the buttons almost unusable, they didn't seem to line up correctly with the actual phone buttons. Eventually took it off which also nearly broke my device. Worst. Case. Ever.
Best case I've ever had was an otterbox for my desire hd
TL;DR: Otterbox>Casemate
Sent from my HTC One X using xda premium
Thanks for the replies guys, I’d like to try the otterbox but they aren’t available yet in the UK.
Hopefully won't be long.
Just to say, I've got the aforementioned case - it seems to fit my One X cleanly enough.
Mine came from Carphone Warehouse though, not online.
Have you considerd buying the Ballistic SG case? im using it and it just PERFECT. fits my global one x perfectly and its really easy to remove it from your pocket (i had casemate before and it was just terrible).
i bought the at&t version and it fits well to my global one!
I bought my tough case from carphone warehouse to, and it doesn't feel like a normal tough case! The silicone is cheap plus the case feels slippery not the usual high quality I expect from casemate! I had the tough case on my desire and desire hd and galaxy s2 so I know how it should feel!
I have noticed there seems to be 2 different tough cases for the hox, if you look on you tube casemate has a video of it which is the case I have (square cut out for headphone jack) but all other reviews for this case on you tube by others shows a tough case with a different headphone jack cut out and a larger cutout for the speaker on the back of the phone! On my case the writing above the speaker is not visible once the case is on but on the other case you can just see the bottom of the writing at the top of the speaker cutout! Anyone else noticed this? It would be interesting to get feedback!
Sent from my HTC One X using xda premium
Just to update you on this, I’ve been to both carphone warehouse and the O2 shop locally and looked at all the tough cases they had in for the One X. None of them had any date stamping and none of them felt as good as my previous tough cases. Then i had a look at a tough case for a SGS3 and it was both date stamped and of nice quality as i would expect. So what's going on here, have CM deliberately made the One X case less good or are they all fakes?
I’ve just been looking at the Ballistic SG case now and that looks like it might be my next case, on Amazon though there’s a 1 to 3 month delivery time!
rwleigh said:
I've just taken delivery of a case-mate tough case for my One X after having them previously fitted to my Desire and Sensation. They have always fitted really well, felt good and grippy and offered good protection. This one however feels cheap and non grippy and after fighting with it for five minutes I gave in trying to get it to sit right on the phone. It just plain doesn’t fit! So I’ve printed out my return postage label from Amazon and will send it back for a refund. Very disappointing but the question is, what do I replace it with? Has anyone else had a similar experience with the tough case on their One X and are there any other good alternatives out there?
Click to expand...
Click to collapse
Very sorry about this. Please contact [email protected] and we will be happy to further assist you.
CaseMate said:
Very sorry about this. Please contact [email protected] and we will be happy to further assist you.
Click to expand...
Click to collapse
You could assist me better on this open forum for the benefit of all potential customers. Can you please confirm whether or not all your tough cases should have a date stamp moulded in to them? After further investigation I now have three friends who have a tough case fitted to their Sensations and they all came from Amazon and none of them have the date stamp that mine does. They all feel of inferior quality to mine as did my recent One X purchase.
Has your quality gone down hill or might they be fakes?
I and others await your reply with baited breath...
One week after emailing support as suggested by CaseMate and including a link to this thread, no reply...
Great customer service, i don't think.
Related
does anyone know if seidio or otterbox have any plans on releasing a case for the trophy?
I just ordered one by Incipio. Hopefully it's pretty decent.
any update if you got your cases in. would like to know a good case.
I just ordered the Incipio Silicrylic case for my Trophy. I can't post the link to it because I'm forum n00b lol.
I'll report back when I get it, but there's a good chance I won't get it until I get back from taking a graduate course next week. I'm leaving on Sunday, and with the free shipping, it might not come until on Monday or later.
In my opinion it's on par with case manufactures like Seidio and Otterbox. This is my first Incipio product and i like it. Had it for over a week now. The silicone is nice and soft, doesn't attract too much lint or dust and it wipes clean better then other silicone cases. It's very tight fitting so theres no movement at all which is good when comparing to cases like the Seidio Innocase surface which will cause little micro scratches on your phone once dust or dirt gets between the case and the phone.
It also comes with a free screen protector which was a nice touch. Kinda expensive at $29 but definitely worth it to protect your investment. Free shipping was good, and it my case took 4 days to arrive from California to NJ.
Another thing to note is that the case definitely makes the buttons easier to press. They seem more defined now, volume buttons act like separate up and down buttons instead of one long rocker. Power and camera buttons are easier to find and press as well. The holes are also nicely designed for the headphones, mic and charger. Most hard cases I've used have slacked in that ares. the charger port is always undersized and most of the time requires you to take the case off to charge the phone.
I have 5 cases for my Evo 4G and if Incipio made a Silicrylic for that phone I would use it over the other cases i have hands down.
Thanks very much for the review and the pics! I'm also in NJ, and I ordered mine on Monday, so I'm hoping I get it by Friday then... I'm glad to hear the the buttons are more defined; the one review on their website said the same thing.
Looks good, think i might buy one. I usually dont case phones, but this one seems kinda hard to hang onto.
Okay, perhaps I'll get flamed for this because it does not fit someone's definiton of "quality" - but I wanted to share that I am blown away by the fit and quality of the Ebay $8.49 case I bought for my Trophy. It does in fact feel a bit rubberized and fits perfectly.
And - while playing, my son dropped the phone from about 3 feet, on the street. I heard the sound of something falling apart and had that sinking feeling. When I looked - the case popped apart, but the case and the phone are completely undamaged and after popping it back on, it is as if nothing happened.
I am okay with that!
The case I got was this:
http://cgi.ebay.com/HTC-7-Trophy-69...712636?pt=PDA_Accessories&hash=item43a77bbabc
I would hope there wouldn't be any flaming! That case looks good to me. I'm glad it worked for you in a time of need lol
I took a few photos so you can see the fit of the Ebay case I mentioned:
And the back:
I've always like the Silicrylic cases I've had for my other phones and since my local Verizon stores (corporate and agent) have absolutely nothing for the Trophy, I may bite the bullet and spend 30 bucks on the Incipio case. I just kind of wish the acrylic part came in different color choices for a little extra 'flair'...
Wow, I'm a dingbat. I see the different color options now... Not that many, I have to say. Perhaps I'm a little too anal retentive, but a blue on black color scheme would match my device theme.
Has anyone gotten anything from Boxwave? They seem to have some decent looking cases but they seem a bit steep. I've never had any of their products before so I'm unfamiliar with them.
diavolo770 said:
Wow, I'm a dingbat. I see the different color options now... Not that many, I have to say. Perhaps I'm a little too anal retentive, but a blue on black color scheme would match my device theme.
Has anyone gotten anything from Boxwave? They seem to have some decent looking cases but they seem a bit steep. I've never had any of their products before so I'm unfamiliar with them.
Click to expand...
Click to collapse
Yeah, I have purchased some power supplies and cables from them. It was all a decent quality product. I would buy from them again.
for example:
http://cgi.ebay.com/SAMSUNG-i9100-GALAXY-S-2-S2-SILICONE-CASE-BLACK-/330577389222?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item4cf7f2a6a6#ht_1357wt_1198
http://cgi.ebay.com/Black-Case-3x-Screen-Protector-Samsung-Galaxy-I9100-/380345350505?pt=PDA_Accessories&hash=item588e597969#ht_2109wt_1139
I've ordered the 2nd and didn't get it yet but I'm afraid it will be crappy
I ordered one similar and tbh took it off after a day it made the phone look so ugly i have found some more exp ones for £15 which look good but tbh im sticking with my screen protector and thats it .
Yes, first one.
Fits perfect, its durable.
I always make sure i get the gel case not the silicone ones as they really attract the dirt/dust , and some say they have a special coating , "YEAH RIGHT"
Tinderbox (UK) said:
I always make sure i get the gel case not the silicone ones as they really attract the dirt/dust , and some say they have a special coating , "YEAH RIGHT"
Click to expand...
Click to collapse
yes..and for that price the s tpu case is miles better than those cases..
Hi, I bought blue TPU case.Fit ok,looks ok too,but there is problem with calling and sound quality.People told me,that they can hear them self ( echo ).Without case no problem.Strange don't you think?
Sent from my GT-I9100 using XDA App
I gave up, ordered Rearth case and screen protectors
Should have got one of these.
http://cgi.ebay.co.uk/SAMSUNG-GALAX...sesPouches&hash=item45fad7bb06#ht_1492wt_1139
The textured sides give very nice grip. The description says silicon/gel, but I'm told by someone on this forum it's actually TPU. I can tell you it's nice and firm and feels very protective. Bought mine from a shop called chitterchatter for £5, where I also got my phone from too. Case is even cheaper on ebay. Here's pics I took of mine. Screen protector needs redoing, too many bubbles, lol.
http://img834.imageshack.us/img834/5664/back1s.jpg
http://img220.imageshack.us/img220/6950/back2dq.jpg
http://img17.imageshack.us/img17/5218/back3gf.jpg
http://img109.imageshack.us/img109/1290/back4p.jpg
http://img215.imageshack.us/img215/1021/front1kb.jpg
http://img534.imageshack.us/img534/4796/front2hg.jpg
http://img64.imageshack.us/img64/9713/front4j.jpg
http://img560.imageshack.us/img560/797/front5.jpg
http://img51.imageshack.us/img51/2475/front6o.jpg
I originally bought one of those silicone ones in the first post, it was quite loose on my phone and the surface kind of stuck to my jeans pocket making it annoying to take out, so I then bought one of the gel/tpu cases that looks identical to the one in the post above, which does a sterling job.
Roman5 said:
Should have got one of these.
http://cgi.ebay.co.uk/SAMSUNG-GALAX...sesPouches&hash=item45fad7bb06#ht_1492wt_1139
The textured sides give very nice grip. The description says silicon/gel, but I'm told by someone on this forum it's actually TPU. I can tell you it's nice and firm and feels very protective. Bought mine from a shop called chitterchatter for £5, where I also got my phone from too. Case is even cheaper on ebay. Here's pics I took of mine. Screen protector needs redoing, too many bubbles, lol.
Click to expand...
Click to collapse
+1
I bought this from ebay for £2.90 and am very pleased with it, collects a bit of dust at the bottom but a lift and gentle blow gets rid of that. Feels grippy and adds a nice bit of bulk to the phone aswell.
About six weeks ago, I bought 4 TPU cases very similar to those mentioned in the OP, for US $8.00. Fortuitously, they arrived on the same day I took delivery on the SGS2. They fit pretty well, although the long sides are a little loose, but not enough to be a danger of slipping off. On my case, the power & volume switches are covered by the case, which has button skins stamped into it. The back is textured with a diamond pattern, and the sides look slick but do have some grip.
Like most cases, it has the top right corner cut out to accommodate the antenna on the Korean version of the SGS2. The first few days I had the case, I noticed it attracted quite a bit of dust, but that appears to have subsided in the last few weeks. Overall, it's much better than I'd have expected a $2 case to be; I'd bought 4 figuring they'd be so crappy that only one of them would fit well, or they'd fail in short order and I'd have to upgrade to a CaseMate, PDAir, or Krusell.
taoranga said:
for example:
http://cgi.ebay.com/SAMSUNG-i9100-GALAXY-S-2-S2-SILICONE-CASE-BLACK-/330577389222?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item4cf7f2a6a6#ht_1357wt_1198
http://cgi.ebay.com/Black-Case-3x-Screen-Protector-Samsung-Galaxy-I9100-/380345350505?pt=PDA_Accessories&hash=item588e597969#ht_2109wt_1139
I've ordered the 2nd and didn't get it yet but I'm afraid it will be crappy
Click to expand...
Click to collapse
I picked up one like that from Amazon. I sent it back today. It did not fit well and I hated that it would not slide in and out of my pocket easily. It also attracted lint from my pocket.
I prefer a hard case.
I have my eyes on a SGP Silke case.
http://cgi.ebay.co.uk/SAMSUNG-GALAX...UK_Mobiles_Accessories_RL&hash=item3366acadbc
Just ordered the above case, initially had the same type from the same seller for my Atrix and it was a really good case.... Lets hope this is just as good
Yea, i bought 2. But you need them TPU one's and not those gel covers. Mine fits pretty wel and worth the 2 bucks.
I bought one S line TPU case, but I find it prety hard to press the buttons. overall it's a really nice case fits perfectly (hard to take off )
i decided to buy this aluminium one :
http://cgi.ebay.co.uk/SAMSUNG-GALAX..._MobilePhonesCasesPouches&hash=item1c1c8cc497
It is really nice! although the silicone part attracts some dust, but not much, the mic holes are not perf cut, but no problems during calls etc.
My box of Xperia Play didn't include a pouch so I must buy something to protect the phone.
I saw a cool plastic case: http://www.accessorygeeks.com/oem-t...-plastic-silicone-case-ag-xper-py-bk-blk.html and I thought it's good for me, but after a while I realised it turns the phone into a brick, something I don't really want to.
So then another option is to get a pouch, searched and found a few, but pretty expensive ($35 - $60). I just want something good, good looking and for a price of maximum $15.
Optional: An invisible screen protector which theoretical protects the screen for scratches.
I need some help here. What should I buy?
I don't know if you know this but, the Xperia Play comes with a preinstalled invisible screen protector. So you're half covered already.
I can't recommend you a case/pouch since I don't have one but I don't even want to know how bulky it'd be with one when it's on my pocket.
I got the official sony ericsson executive hardcase and i love it - http://www.amazon.co.uk/Sony-Ericsson-SMA7110-Executive-Xperia/dp/B004S5CP0Q
I don't really like the snap on case because I hate adding bulk to an already bulky phone and also I have the DK300 dock and it would require me to constantly take off the other cases.
I also bought the official pouch that came with the European models from here - http://www.netimes.com/shop/sony-ericsson-xperia-play-pouch-ca850-p-3255.html?cPath=70_808
subcu1ture said:
I also bought the official pouch that came with the European models from here - http://www.netimes.com/shop/sony-ericsson-xperia-play-pouch-ca850-p-3255.html?cPath=70_808
Click to expand...
Click to collapse
Off-topic but how trustworthy is that site? I see they have a lot of accessories and ship worldwide, so far I've only used DealExtreme but they don't have many phone-specific stuff (except for the iphone).
Fast and efficient and supply tracked shipping.
I was amazed they had tracked shipping with signature approval for something that was just an envelope.
foofbag
Check this out: (google foofshop)
I bought my macbook sleeve/pouch from there a few years ago and it was awesome for keeping scratches off etc. Then When I got my play I measured up the iphone sizes for their iphone cases and on a whim just bought one to see if my would fit in it. was a bit tight at first but after a while it now fits as snug-as-a-bug-in-a-rug! and it looks cool aswell, hardly adds any bulk and even if it does at least when I pull it out I don't look like I have a brick for a phone but just an awsome pouch/sleeve thing and i pop my phone out of. defo recomend.
So to make sure you guys are aware, if you're up for it, buy the iphone sized one, thats the one I got. They are designed to fit iphones but plays fit fine ;oP lol. They're Australian based but post all around the world, i got mine within a week in the UK.
----mistake----
subcu1ture said:
I got the official sony ericsson executive hardcase and i love it - http://www.amazon.co.uk/Sony-Ericsson-SMA7110-Executive-Xperia/dp/B004S5CP0Q
I don't really like the snap on case because I hate adding bulk to an already bulky phone and also I have the DK300 dock and it would require me to constantly take off the other cases.
I also bought the official pouch that came with the European models from here - http://www.netimes.com/shop/sony-ericsson-xperia-play-pouch-ca850-p-3255.html?cPath=70_808
Click to expand...
Click to collapse
I got the second one with my phone. I generally hate phone cases but this is nice since it's not making a brick out of phone and it's not taking away it's style. On the left is a cut-out so the headphones plug isn't covered, and it makes easier to take out the phone.
Pouch on first link is a bit ugly.
bought a cheapy gel case of Amazon and noticed there is not openings for the stereo speakers , I just looked at the case in post 1 and it has not speaker openings as well
This item, on ebay, has the speaker ports open, and is slimmer, and better than the Gel one I tried:
Search for that item number: 190527208284
I've got one of these, and it's well worth a few quid more.
Your case looks like the one i was going to order from Amazon for £2.99 , but is only £1.99
Thanks
John.
RottenFoxBreath said:
This item, on ebay, has the speaker ports open, and is slimmer, and better than the Gel one I tried:
Search for that item number: 190527208284
I've got one of these, and it's well worth a few quid more.
Click to expand...
Click to collapse
lol..It's a nice case, fits well, is slimmer than the crap one I had(prepaymania £2 gel case, and another from local phone shop, both identical to be honest), and I had given up on cases for it, as well, I thought most were the same(people even have issues with otterbox, etc..)
It's semi transparent, and it allows the sliding motion well, better than the other two I tried, i felt they were prising the phone apart, but this one isn't an issue.
well worth £1.99, IMO.
Cool stuff
Sent from my R800i using xda premium
Beast of a case right here. Extremely thin, lightweight, and several different colors. I wouldn't expect anything less than that from Diztronic.
Amazon
Diztronic
If you guys have any questions about the case I would be happy to answer them. :good:
nice thanks !
Seems nice, but I can cover up this sexy phone with a case like that. I must be able to see it in it's glory. Lol I have pre-ordered a few Poetic Cases and will be in several weeks, they had issues at the factory the guy told me.
HotInEER said:
Seems nice, but I can cover up this sexy phone with a case like that. I must be able to see it in it's glory. Lol I have pre-ordered a few Poetic Cases and will be in several weeks, they had issues at the factory the guy told me.
Click to expand...
Click to collapse
Yeah the Poetic cases look great. I'll be picking some up soon and reviewing those as well.
Beast indeed.
I bought one back when they were branded TC for my Galaxy S2 as a holdover until Seidio started selling a case. It was one of the cheapest on Amazon at the time. A year and a half and many miraculous saves later I'm retiring the phone in near perfect condition. I'm definitely getting one for my One.
pokey9000 said:
Beast indeed.
I bought one back when they were branded TC for my Galaxy S2 as a holdover until Seidio started selling a case. It was one of the cheapest on Amazon at the time. A year and a half and many miraculous saves later I'm retiring the phone in near perfect condition. I'm definitely getting one for my One.
Click to expand...
Click to collapse
Yeah, I got my first one back when I had my Galaxy Nexus LTE. After being happily surprised I got both the hard shell and TPU for my Nexus 4 and will be using this one on my future HTC One. Hopefully sales are good enough for the TPU that they release a hard shell case.
That gray looks sexy for sure. Anyone know if it will yellow over time though? I sure want it but scared it will look ugly in a few months time.
Sent from my Nexus 4
Gja88 said:
That gray looks sexy for sure. Anyone know if it will yellow over time though? I sure want it but scared it will look ugly in a few months time.
Sent from my Nexus 4
Click to expand...
Click to collapse
I doubt it will grey over time. I've never had it happen to me on any case.
I ordered this case as well from amazon today. I can't help but notice the number of you guys posting from nexus 4 devices. I have only had the nexus 4 now for about 3 weeks yet I got the htc one today. I planned on returning it to bestbuy within my 14 day period to get the S4, but I will not part with this beast.
dxwilliams40 said:
I ordered this case as well from amazon today. I can't help but notice the number of you guys posting from nexus 4 devices. I have only had the nexus 4 now for about 3 weeks yet I got the htc one today. I planned on returning it to bestbuy within my 14 day period to get the S4, but I will not part with this beast.
Click to expand...
Click to collapse
Yeah I'm scared to make the switch to HTC and sense since I've had stock since the gnex lte but I've never owned an HTC device and I always thought sense looked nice. I've heard so many bad things about it that it has me worried, but I guess I've gotten bored of pure stock for a bit and its time to try something new. Either way I can't wait to try it out. Hopefully its worth it!
Sent from my Nexus 4
I got my Diztronic Gray TPU case today, and since I've been using the HHI (purchased from that $0.99 sale last week) I figured I'd share the differences having them both in hand.
As I said above, I had a Diztronic TPU on a previous phone and enjoyed it although it had a few flaws (excess molding flash around buttons, missing NC mic hole). Being a tightass I jumped on the cheap HHI case deal, figuring I'd take a chance on other manufacturers matching that same quality.
And I was rewarded for my cheapness with a cheap case. The HHI case has two big problems as far as I'm concerned. The cutout for the power button is pill shaped, following the contour of the button and projecting upwards away from the case. It doesn't leave much room for a finger to press, especially when trying to use your index finger when one-handing it. I remedied this with an X-Acto and a soldering iron to smooth the cut, opening up the button hole towards the back of the case. More troubling though is the fit around the front of the case. HHI managed to get the back of the case to fit the curves of the One nicely. However they didn't account for the bevel around the One's bezel. The side effect of this is that the corners don't stretch the front portion enough, leaving the sides to bow out a couple of mm at the center of each side. I don't think this would affect the function of the case in an impact, but at best it ruins the straight line aesthetic of this phone. One lesser annoyance is the molding seam that runs the entire perimeter, which isn't distracting to the touch but is very obvious against the transparent side pieces.
The HHI seems like it would be a functional case from the aspect of being protective: it covers the corners with shock absorbing TPU and protects the bezel where it counts. It goes in and out of pockets easily and the matte clear blends well with the color of the silver phone.
Today the Diztronic came in and the extra $11.51 proved well worth it. The Diztronic case fixes both of the issues I had with the HHI: the power button cutout is nearly flush with the button at the front and back, making it easy to push, and the front fits snug and stays straight along the edges. Like the HHI, the cutouts all line up ok, and while it doesn't make a functional difference the camera cutout is centered maybe 1mm too low. Unlike the HHI, the molding seams are small and in the corners. My previous TPU case experience was with a black case, so time will tell if I'll see this one turn yellow after a few months. If that happens (and supposedly it's inevitable with clear TPU) I'll buy the black version without hesitation.
TL;DR: The HHI and Diztronic TPU cases both do their jobs, but the Diztronic is well worth the extra money for the fit and finish.
Nxxx said:
Beast of a case right here. Extremely thin, lightweight, and several different colors. I wouldn't expect anything less than that from Diztronic.
Amazon
Diztronic
If you guys have any questions about the case I would be happy to answer them. :good:
Click to expand...
Click to collapse
SH*T. lol i just spent awhile putting a video together for these cases. hahaha
http://www.youtube.com/watch?v=czwrO4AWlQ0&feature=youtu.be
I don't like how the logo and branding has gradually gotten larger and larger as well as the price increase.
fightr said:
I don't like how the logo and branding has gradually gotten larger and larger as well as the price increase.
Click to expand...
Click to collapse
The logo is so small though... And it's only $11! Haha
Sent from my HTC One using xda premium
beforedenied said:
The logo is so small though... And it's only $11! Haha
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Haha 'tis is true but I remember I got my HTC One S case for approximately $7 or so but
nevertheless I am quite content with this case! I just recieved it today, so far so good. I was a little concerned that it would cover the camera a little as the cutout looks really tight and possibly even touches the lens but it actually doesn't affect the pictures which is fine for me!
Otherwise I'm liking it! I feel like it is definitely a little more protected than it would be naked but slim enough to not make much of a difference although I do miss the aluminum unibody feel a little..
Just to add, definitely not going to protect much from a crazy fall or anything but I already knew that when I decided to purchase it.
Purchased this case after seeing everyone's reviews here. Thanks everyone!
I'm trying to find a case with a belt clip but I've only found one believe it or not. Searching Amazon I've found the same case rebranded a hundred times over.
Problem is, I bought one and it has a critical flaw. With the case on the phone, insert it into the slip holster (aka clamshell) and the railing of holster constantly pushes the power button, so every time I pull out the phone, it reboots! I though it was my phone at first. Anyway, all designs on Amazon are the same! Just overseas made and sold by differing names.
I checked eBay too
I have found some nice horizontal cases (with a flap) that I think will work but I'm feeling like I will never see a true clamshell or clip design for this device...
I don't pocket my phones at all. I find it ruins the finish and is uncomfortable to me.
Just a rant. Anyone know of a well built case that offers a belt clip. I'll pay the price for a quality case, gladly!
Sent from my ZTE A2017U using Tapatalk
A crazy idea that might work....
I had an idea! The Axon 7 measures 5.97 x 2.95 x .31 and the Google Pixel XL measures 6.09 x 2.98 x .33. With my TPU case on, I think if I purchase the Seidio spring clip holster this might just fit the bill. The side rails might be cutting it close, but I am willing to take the chance.
Edit: am dumb
Edit2: I was right, it has a belt holder: Case with holder
Boutchoo said:
Edit: am dumb
Edit2: I was right, it has a belt holder: Case with holder
Click to expand...
Click to collapse
I tried that one. It has a critical design flaw. When I put it into the belt holder, the belt holder pushes, and holds, the power button hard-rebooting my phone every time. I think the inner rubber phone case fits loosely which causes too much material over the power button. LOL Otherwise it isn't that bad of a combo.
Sent from my ZTE A2017U using Tapatalk
emtownsend said:
I tried that one. It has a critical design flaw. When I put it into the belt holder, the belt holder pushes, and holds, the power button hard-rebooting my phone every time. I think the inner rubber phone case fits loosely which causes too much material over the power button. LOL Otherwise it isn't that bad of a combo.
Click to expand...
Click to collapse
Amazon. Com
Received my Poetic Revolution series case for my A7 today. I am very impressed by it thus far, especially by the built-in screen protector since there are no full screen tempered glass protectors for the A7 due to the curved glass. I don't plan on tossing my phone around to test out the durability but it feels like it is going to offer some good protection all around.
Is there any flip cover case with sleep/lock function, like the original?
Couldn't find any, on ebay or EU amazons, except the original from US which costs 55 $ with postage to Europe...
Nillkin, who has such nice quality and economy cases, has not produced an Axon 7 case.
Any suggestions pleaseeee ?
I'm very happy with the one given in the box.
Envoyé de mon ZTE A2017G en utilisant Tapatalk
nek4d said:
Is there any flip cover case with sleep/lock function, like the original?
Couldn't find any, on ebay or EU amazons, except the original from US which costs 55 $ with postage to Europe...
Nillkin, who has such nice quality and economy cases, has not produced an Axon 7 case.
Any suggestions pleaseeee ?
Click to expand...
Click to collapse
You can buy the original from ZTE or B&H. Both dropped the price to 9.99 USD. B&H I know ships internationally-don't know about ZTE.
https://www.zteusa.com/products/accessories/
https://www.bhphotovideo.com/c/product/1297278-REG/zte_a2grcas_clear_view_folio_case.html
I just ordered this metal case.
https://www.amazon.com/gp/aw/d/B06XZ3PV82/ref=ya_st_dp_summary
borijess said:
I just ordered this metal case.
https://www.amazon.com/gp/aw/d/B06XZ3PV82/ref=ya_st_dp_summary
Click to expand...
Click to collapse
Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.
rEVOLVE said:
Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.
Click to expand...
Click to collapse
Just got the case today. I ordered a black one and i got a silver mirror looking back. I will be sending the case back. The back is plastic and it very reflective. The only metal is the bumper.
borijess said:
Just got the case today. I ordered a black one and i got a silver mirror looking back. I will be sending the case back. The back is plastic and it very reflective. The only metal is the bumper.
Click to expand...
Click to collapse
Ah, sorry to hear about that - I was hoping you had good news, but it seems not only did you not get what you wanted, but have to go through a bit of inconvenience to return the product. I appreciate that you shared your experience, though- thanks a lot for saving me from the same mistake.
I've using my poetic case for a few months now, and thus far I have a few complains
- flaps they remain open after a while, I cut them off both recently
- screen protector awful scratches easily, removed it and used a higher quality protector instead
now is near perfect the case plays well with third party screen protectors and is VERY sturdy, has saved me from QUITE a few drops
emtownsend said:
I'm trying to find a case with a belt clip but I've only found one believe it or not. Searching Amazon I've found the same case rebranded a hundred times over.
Problem is, I bought one and it has a critical flaw. With the case on the phone, insert it into the slip holster (aka clamshell) and the railing of holster constantly pushes the power button, so every time I pull out the phone, it reboots! I though it was my phone at first. Anyway, all designs on Amazon are the same! Just overseas made and sold by differing names.
I checked eBay too
I have found some nice horizontal cases (with a flap) that I think will work but I'm feeling like I will never see a true clamshell or clip design for this device...
I don't pocket my phones at all. I find it ruins the finish and is uncomfortable to me.
Just a rant. Anyone know of a well built case that offers a belt clip. I'll pay the price for a quality case, gladly!
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I spent tons of time looking for cases for the Axon 7 and found that honestly there are 5 variants. The poetic tank case, the Spigen "rugged armor" case, the dual layer (rubber plus plastic) case thats rebranded by tons of companys, the "iron man" dual layer case (Also rebranded by various companies), and the belt clip one with terrible reviews because of the problem you stated. There are a few others that are some variation of the above or some see-through ones with bumpers but honestly none seemed satisfactory.
In light of this I decided to opt for ZTE's own hybrid material case. I haven't dropped the phone since I put it on but it is definitely sturdier than the case they included with the phone and the material is hard enough yet flexible enough that it seems like it would be able to take a hit without causing any damage to the phone. It also fits really well and is not bulky either. I realize this might not be what you're looking for but for some strange reason good quality cases are far and few between for this phone (perhaps due to some kind of licensing issue from ZTE?) so that case might be your best bet :/. You could potentially get some other kind of belt holster and have this phone sit in it while in the case.
Link for ZTE case: https://www.zteusa.com/axon7-co-mold-protective-case
Aluminum doom
Though this question was posed back in May , I didn't see a response answering the question so I'll answer it for you in case anyone else is curious . I purchased the Mirror case for $3.89 on eBay in piano black . ( I always seem to find better deals there and easier to navigate then the Big A but that's just my opinion). It is indeed a beautiful case and mine came in with no damage whatsoever . Indeed it is a tight fit putting the back on but once you get it in place everything does line up perfectly . The concern from another member was whether or not the signal would be blocked with the aluminum casing around the edges . The answer is a very easy yes . The signal degrades horribly . I only get two bars inside my home and with the case on it dropped to 0 with no signal whatsoever . It does get some signal outside but it's not worth using this case if I may be missing important calls or messages from clients . Sadly it's just a beautiful case with poor execution with the materials involved . Fortunately I didn't lose much on the case itself . I really wanted this one to work strictly because it looked so awesome even though it's not great when it comes to protecting the phone itself in a drop . Hope this helps if anyone else was curious about the case.
[=rEVOLVE;72176896]Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.[/QUOTE]