Develop Bugs

[How to][Tip] Disable Data traffic and Download limit reminder on MIUI Roms

This is for those who are on unlimited data plan and annoyed by the download limit reminder on MIUI Roms.
I searched and researched and couldn't find recent information on how to disable that friendly reminder. But finally found it and thought I help save time for others.
Step 1: Open 'Download' (mine was in a folder called 'security center' after flashed)
Step 2: Make sure 'Download via WiFi only' option is unchecked or turnoff
Step 3: Hit menu and go to settings
Step 4: Make sure 'Data download prompt' is also unchecked or turnoff
That's it.

Screenies for Ref;

You couldn't post this a day earlier?!?! Lol
One of the main reasons I went back to PA was because of the mind numbing pop up every time I want to download something off of the internet and download or update an app in the play store.
Thanks Myowin, looks like I'm going to give miui another chance lol.
Sent from my SGH-T999 using xda premium

myowin said:
This is for those who are on unlimited data plan and annoyed by the download limit reminder on MIUI Roms.
I searched and researched and couldn't find recent information on how to disable that friendly reminder. But finally found it and thought I help save time for others.
Step 1: Open 'Download' (mine was in a folder called 'security center' after flashed)
Step 2: Make sure 'Download via WiFi only' option is unchecked or turnoff
Step 3: Hit menu and go to settings
Step 4: Make sure 'Data download prompt' is also unchecked or turnoff
That's it.
Click to expand...
Click to collapse
thanks, but after that actions, when attempting to download app, from play store, that sized more then 10M, its trying to download, and just start waiting for wifi without prompt me, then I've to stop>instal and appears prompt if I want to proceed...
so it made download process even harder.
any known solution?

thanks
this my problem..
fixed
SR my ENG so bad
---------- Post added at 07:52 PM ---------- Previous post was at 07:52 PM ----------
thanks
this my problem..
fixed
SR my ENG so bad

[DEV][ROM][JB 4.3][Unofficial] PAC-man

Issue:
No BT call.
Broken audio in VOIP (viber,skype,teamspeak etc). Tinyalsa would fix that, but it breaks calls.
Mic key (voice search) works, you need to enable: settings -> system -> hardware keys -> enable custom actions (check) and app switch set to voice search.
To get home key logn press action: settings -> system -> hardware keys -> enable custom actions (check) and home key (long press) set to Recent app switcher
When you upgrade, phone app may not work, you must remove the shourtcut, and readd. (thanks scotte9999)
Sometimes it stuck boot logo (cm,samsung,roger), please remove the battery and wait atleast 5 minutes,
Offline charger, you can leave with removing charger and holding power button for 2 sec, and glide will boot.
Liblight works very simple, when your lcd birghtness low buttons and keyboard light is on. You can use qwertyled or other liblight,read more.
Slow storage performance in some apps.
download
http://dualhoki.vim.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
http://rpi.bubor.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
changelog
20130912: phone encrypt support
20130913: BT LPM support, overclock support
20130921: PACMAN update
20130925: camera and charger
20131002: www/com key fix
20131007: PACMAN update
20131018: keyboard arrow fix
20131028: vibration intesity
20140102: just PACMAN update
20140225: just PACMAN update, I havent tested.
install
factory default
install zip
gapps included in my zip file, you dont need to install any gapps

reserved
can´t swap SDCards
edit /sysrem/build.prob and add:
Code:
# Change to 1 for swapping SD cards
persist.sys.vold.switchexternal=1
below
Code:
# Storage configuration
ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1
You can use recovery installable zip: http://dualhoki.vim.hu/bubor/dev/swap-internalsd-externelsd.zip
gyroscope fix
power off the phone (better remove battery for sure), put on a desk, power on and wait, it shoud calibrate itself.
Credits:
* tonyp https://github.com/tonyp/android_vendor_google
* Epsylon3 https://github.com/tpruvot/android_device_samsung_i9103
* kick buttowski
* Adam77Root
* yohan4ws
* gtmaster303
* The-Covenant team
* dman3285
* thegreatergood
* spyke555

yippppy downloading right now

thanks bubor, looks great

How do I make the keyboard lights work ?
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
greeneyez15o said:
How do I make the keyboard lights work ?
Click to expand...
Click to collapse
nvmd

Do I need to download gapps for this? Or is it included?

Kombatant said:
Do I need to download gapps for this? Or is it included?
Click to expand...
Click to collapse
included, original gapps doesnt compatible with tegra2 devices.

Thanks for the quick reply man, flashing as we speak; haven't updated my ROM in ages Will report back any findings.
edit: Apart from some text to speech crashes, everything's peachy so far

so far so good gooodwork!

flashed, no problem so far (except the known issues). No lag wake or delayed-until-wake SMS seen, but i've just flashed the ROM for 12 hours so I can say that they are reduced, but i'm not sure if they are fixed or not. I prefer the old style quick setting button, but this is good tho

Wow, I was surprised at how functional this was for how new the thread is.Everything I've tried has worked with no issue (basic functions, data, a2dp bluetooth, sd card, wifi, gps). going to try and Wifi tether and actually trying to use the "phone" functins when I get a chance.
One thing so far, I don't think this has been said, is that the recents takes forever to pop up (like 6-7 seconds!). I tried remapping it away from the home button, but it still didn't speed up.
Also, where do I customise those handy shortcuts in the recents? and wtf is a ribbon?

it looks like there's some problem with the WiFi toggling.
Action: pressing the WiFi button on quick setting panel and the quick pulldown menu
Expected result: the button flipped and show the new icon indicate that the WiFi has been turned on
Actual result: the button flipped, but the icon is still the old one (it's the icon when WiFi is off)
I tried going to setting and press the WiFi button, it switched from "Off" to "On" and stayed there for about 10 seconds, then switched bak to "Off" again.
It's pretty rare 'cause I only met this twice after 2 days using, a reboot will solve the problem.

Tyfighter said:
Wow, I was surprised at how functional this was for how new the thread is.
Click to expand...
Click to collapse
Seconded and signed, this is a quality release from the get go. Cheers man!

Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?

PghSportsGuy said:
Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?
Click to expand...
Click to collapse
better, but not must.
Phone app changed, so you must remove shortcuts and readd.

Bug: when you try to use the navbar widgets, the system UI get crash.
Sent from my SGH-I927 using xda app-developers app

Today I got a lot of "Cell Broadcasts" messages, contents are unreadable (only weird symbols), this ended after a reboot, anyone ?
BTW, when plugin in the charger while the phone is off it displays a charging icon (a circle with a battery), normally it will automatically turns on the phone when the battery reaches - let's say - 15%. But to this ROM it doesn't, I have to do a manual reboot.

hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])

dadashi.reza said:
hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])
Click to expand...
Click to collapse
did you do full wipe install?

bubor said:
did you do full wipe install?
Click to expand...
Click to collapse
yes dear bubor...
I had to flash 4.2.2
4.3 rom after reset stay on rogers logo

[How-To][ROOT] Edit/Swap hardware keys on OOS double tap and long press too.

Hi all, i've jumped from OOS to CM12.1 and CM13 (and cm13 based roms) for some time, but today i wanted to give another shot to OOS 2.2.0 (and wanted to try boeffla's kernel as CM isn't official yet).
And i remembered why i could not stay on OOS after a few seconds... i really hate the hardware keys setup (recents-home-back).
I'm used to have Menu-Home-Back (and recents access from long press home, or press home from nova launcher).
I've been reading and then learning many things in the past few weeks, so i though i should try to edit those keys just like we did on CM, even if before switching to CM i've looked around and didn't find anything working to change these.
So, here it is.
What you need:
Rooted phone and file manager with root access (there are many but i love FX file explorer, and the root add-on is free).
You need to go to /system/usr/keylayout
Then make a backup of the Generic.kl file (to make it easier i make an archive of it by long press on the file, then archive, but a simple copy and paste will do).
After that, don't forget to unlock the system partition if needed (tap the little lock and accept to open it on fx file explorer).
Open Generic.kl with file editor.
What you need to know is that left key is key number 139, middle one is number 172 and right one is 158.
Functions that can be affected are: MENU HOME BACK APP_SWITCH VOICE_ASSIST.
But for some obscure reason, MENU acts like APP_SWITCH in oxygen OS, so the trick is to replace MENU with MENU VIRTUAL (this will emulate Menu button from on screen navbar, but you don't need to activate the navbar).
So, if you want for example this layout: Menu-Home-Back
You'll need to edit the Generic.kl and replace the Line
key 139 MENU
with
key 139 MENU VIRTUAL
(key 158 BACK and key 172 HOME don't need to change).
Another interesting point is that if you use xposed installer and Gravity Box LP, you can assign different functions to double press or long press on buttons, but it's working only with on screen navbar buttons... you see where i'm trying to get ?
If you modify the generic.kl file and replace MENU with MENU VIRTUAL and BACK with BACK VIRTUAL... then you'll be able to add custom actions with Gravity Box... like the one I really miss, hold back to kill.
I didn't try to replace HOME with HOME VIRTUAL as i can configure long press and double tap home from oxygen OS, but it may work exactly the same if you want something special from Gravity box.
For exemple, my setup is like that:
Menu-home-back
Menu long press => Switch last app
Home long press => Recent apps
Back long press => Kill foreground app
Double Tap Menu => Google Now
Double Tap Home => Screen off
Double Tap Back => Nothing
To sum up, on the phone, keys are:
key 139 - key 172 - key 158
You can affect different general functions to these, like:
MENU
HOME
BACK
APP_SWITCH
VOICE_ASSIST
and maybe more
You can add VIRTUAL behind the function to emulate the on screen navbar buttons (and it seems required for the menu, as it still calls the recent apps in OOS), and then you can add double tap or long press functions with gravity box.
You don't need to enable the navbar to get them working.
I don't know if i've been clear enough, as i'm not used to this kind of things (i wonder if that's not my first thread on XDA...), but i just hope this will be useful to some of you,
have a great day.
[Edit: Forgot to mention you need to reboot the device when it's done]

Great thread. Will test

Got a bit of an issue... I just experimented with this and it was providing very odd results. So, I copied the backup generic file back to the location... restarted the phone. Now, no buttons do anything. There's no way for me to get home so a restart is the only option I have by forcefully turning off the phone. I'm not sure what to do, the file looks absolutely fine. Any help please? I don't know what to do... I don't want to reflash the rom..

If you restored the original file, at the original place, I don't know why this would not get you back...
Did you try to change the behavior of key in settings?
Envoyé de mon ONE E1003 en utilisant Tapatalk

J0kker said:
If you restored the original file, at the original place, I don't know why this would not get you back...
Did you try to change the behavior of key in settings?
Envoyé de mon ONE E1003 en utilisant Tapatalk
Click to expand...
Click to collapse
Thanks for your help, but unusually it eventually sorted itself out. After 3 reboots the buttons began to work again... weird!

can you change hardware keys to [L-R] Recent Menu Back on CM13 using this method?

sphoenixp said:
can you change hardware keys to [L-R] Recent Menu Back on CM13 using this method?
Click to expand...
Click to collapse
Yes you can, but the file isn't the same, you should edit:
system/usr/keylayout/synaptics-rmi.kl
If you want to swap keys, simply switch the numbers (139 with 158), it's exactly the same as modifying the functions, but easier to type, especially on a phone.

It doesn't work for me. I added virtual at menu and back. Changed gravitybox back long press and double tap to kill foreground app. Single tap of back still not working.
Have i missed out anything? Oss 2.20 here.

J0kker said:
Yes you can, but the file isn't the same, you should edit:
system/usr/keylayout/synaptics-rmi.kl
If you want to swap keys, simply switch the numbers (139 with 158), it's exactly the same as modifying the functions, but easier to type, especially on a phone.
Click to expand...
Click to collapse
Thanks so much it worked.
Saved and rebooted the phone

Tiongkia said:
It doesn't work for me. I added virtual at menu and back. Changed gravitybox back long press and double tap to kill foreground app. Single tap of back still not working.
Have i missed out anything? Oss 2.20 here.
Click to expand...
Click to collapse
Strange, i'm on OSS 2.2.0-X and it's working perfectly.
Maybe try to activate Master switch under Navigation Bar tweaks in gravity box ?
I'm almost sure this won't help, but you need to write it all in uppercase letters.

J0kker said:
Strange, i'm on OSS 2.2.0-X and it's working perfectly.
Maybe try to activate Master switch under Navigation Bar tweaks in gravity box ?
I'm almost sure this won't help, but you need to write it all in uppercase letters.
Click to expand...
Click to collapse
Its already in caps. Don't work
Also try enabling master switch under navigation bar tweaks. Also don't work.
I just updated to 2.2.0-x too

Tiongkia said:
Its already in caps. Don't work
Also try enabling master switch under navigation bar tweaks. Also don't work.
I just updated to 2.2.0-x too
Click to expand...
Click to collapse
I can try to upload my generic.kl file if you want, just to see if it works for you as it does for me (this way we will know if it's this file related or not).
You should have menu-home-recents.
Rename the file (remove the .txt, i could not join a .kl file, invalid).
Maybe check the permissions too.
Envoyé de mon ONE E1003 en utilisant Tapatalk

J0kker said:
I can try to upload my generic.kl file if you want, just to see if it works for you as it does for me (this way we will know if it's this file related or not).
You should have menu-home-recents.
Rename the file (remove the .txt, i could not join a .kl file, invalid).
Maybe check the permissions too.
Envoyé de mon ONE E1003 en utilisant Tapatalk
Click to expand...
Click to collapse
I appreciate it buddy. But don't work

Tiongkia said:
I appreciate it buddy. But don't work
Click to expand...
Click to collapse
Sorry to ear that, if you ever manage to get it working, let us know (and why/how).

Tiongkia said:
I appreciate it buddy. But don't work
Click to expand...
Click to collapse
You should check if A you have a text editor that supports editing in system partition and B if you have root file explorer that supports writing in system partition (and permissions). I would recommend es file explorer, just for this particular task. Afterwards just delete the file explorer.
The easy way is to delete the file in keylayout and write the file (with es file explorer) from OP couple of posts ago in keylayout direction. Reboot and also enable masterswitch in gravitybox. Voila, this method can't go wrong and works always.

I have es explorer and root browser. I am able to change permission too. Also reboot but no effect.
Anyone else tried?

Tiongkia said:
I have es explorer and root browser. I am able to change permission too. Also reboot but no effect.
Anyone else tried?
Click to expand...
Click to collapse
I tried and it worked perfect. Can you look up what your generic file says under 139 and 158 ?

Tiongkia said:
I have es explorer and root browser. I am able to change permission too. Also reboot but no effect.
Anyone else tried?
Click to expand...
Click to collapse
Just wondering, do you have navbar enabled ?
If it is, try to disable it and reboot... i've never tried with navbar enabled, so who knows !

Tried all. Don't work. I give up. Thanks buddies. Appreciate it

Hi,
Applied without problem, just I can't set double tap action on the Home button.
I don't know why double tap doesn't work just for the home button. No problem with menu or back settings or on long press.
I think that Nova breaks this setup.
My conf :
OOS 2.2X, Xposed 80, Gravity Box 5.3.3, Nova lastest release
Edit : When I revert to the original file, the default setting (Settings > Buttons) Double tap for the Home buton is ignored.

Multi user feature on HTC 10

Hi,
I am trying to get multi user feature to work on my HTC 10 because this is not enabled on the version I have (pre-ordered, UK, no carrier).
I rooted the device following this post. Everything went ok.
Using BuildProp Editor I added on my build.prop the following lines:
Code:
fw.max_users=3
fw.show_multiuserui=1
After rebooting I see the option Users on Settings. I go ahead and add new user, it prompts "set up user now?". If I say yes, it switches to a new lock screen. However, when I try to unlock the screen, it says "Unfortunatly, Setup has stopped." with an OK button that when pressed just gives me the same message. No other function is available other then give OK, volume keys and power button. To get out of the message loop I need to reboot phone. After reboot, I see the new user that I tried to create on the list of user but If I try to enter I get the same Setup error.
Has anyone tried this?
I know that similar thing can be done via a Xposed module. But I would like to have this sorted without having to go there for now.
Running rooted 'stock' Android 6.0.1 (1.30.401.1) on HTC 10.
Cheers
--------------------
SOLUTION:
1 ) I edited the build.prop and removed the lines I added to get back to original.
2) I installed Xposed and a module XposedMultiUsersModule. This gave-me again the the Users option on the Settings. But trying to add new user gives the same error on Setup as before.
3) I edited the build.prop. Change the line ro.setupwizard.mode=OPTIONAL to ro.setupwizard.mode=DISABLED.
Then you can add new user and everything will be ok. You just need to add your google account and setting a few things up manually as necessary for your use. I do believe that I could have done the step 3 without steps 1 and 2. But I just don't want to test that now.
So far, no issues with internet connectivity. I'm happy.
Hope it helps!

UPDATE: If one tries Guest instead of creating a New User, you can use it. It even allows you to keep yours application settings and data after reboot. However, I am having lots of problems regarding losing internet connectivity on the the Guest account when I switch back to Owner profile. That is a problem because I would like to have app running on the Guest account that need to be online.
If there was a way to clone another account or bypass the android Setup application I think I could manage to get what I want.
SOLUTION:
1 ) I edited the build.prop and removed the lines I added to get back to original.
2) I installed Xposed and a module XposedMultiUsersModule. This gave-me again the the Users option on the Settings. But trying to add new user gives the same error on Setup as before.
3) I edited the build.prop. Change the line ro.setupwizard.mode=OPTIONAL to ro.setupwizard.mode=DISABLED.
Then you can add new user and everything will be ok. You just need to add your google account and setting a few things up manually as necessary for your use. I do believe that I could have done the step 3 without steps 1 and 2. But I just don't want to test that now.
So far, no issues with internet connectivity. I'm happy.
Hope it helps!

Hi,
thanks for the updates. do you think it would work by just editing the build.prop file with the line modifications ?
add :
fw.max_users=3
fw.show_multiuserui=1
change :
ro.setupwizard.mode=OPTIONAL
to
ro.setupwizard.mode=DISABLED
Thanks !

nuts77 said:
Hi,
thanks for the updates. do you think it would work by just editing the build.prop file with the line modifications ?
add :
fw.max_users=3
fw.show_multiuserui=1
change :
ro.setupwizard.mode=OPTIONAL
to
ro.setupwizard.mode=DISABLED
Thanks !
Click to expand...
Click to collapse
It Works ...

i am able to create a new user with changing the above mentioned settings, but dont know how to change between the two users not even able to change to guest and back to original account, i can however see the guest account in the user list please guys help me i am stuck with my new user account which i setup after making these changes unable to go back or switch back to original account

No usable phone, no icons, no task-statusbar, only background

Hey Everybody
I have troubles since i clicked a button in my status bar. I removed EVERYTHING from my home and lock screen (i cant even tell witch one i see). There are no Icons at all. only my desktop background is visible and working (animated bubbles). there is no button working except from power button (and its menu to restart). a friend of mine was able to get a screenshot with some button-combination (vol+ + home?)
first: i am not an expert with android, but have a lot of experience in working with Linux shells.
what i have done:
maybe it has something to do with it or not, i don’t know:
i enabled multi view / multi window or extended desktop (sorry i don’t know the name, and as there is nothing shown...)
i opened my status bar and there were some new icons (next to the small watch in the right corner), witch i haven’t seen so far and clicked it. than it opened a "new" screen with only my background.
as i thought it is maybe only a "dead" app i tried to restart my phone. but: there is only that screen working. no PIN question, or something.
i tried to reset dalvic and normal cache. -> no change.
i use RESURRECTION REMIX 5.7.3. on N7100
Recovery TWRP 3.0.2-0 is still working and
i hope somebody can help me to solve my problem without factory resetting. i wont reinstall everything.
thanks a lot

Are you able to restore a TWRP back up? You could try flashing the ROM again without wiping.

theoretically, yes, but i did not have on. so i cannot flash it.

i am searching for an commandline option to change the settings. but i have no clue where to search, and in what files the configuration lies...