I bought a new KF and it has 6.3 on it. I would like to root via BuritooRoot3 but I need 6.2 to run his app. Is there any way to take a stock 6.3 KF and get it back to a stock 6.2 ???
Thanks !
Thibor69 said:
I bought a new KF and it has 6.3 on it. I would like to root via BuritooRoot3 but I need 6.2 to run his app. Is there any way to take a stock 6.3 KF and get it back to a stock 6.2 ???
Thanks !
Click to expand...
Click to collapse
Flash MoDaCo rom. It's a pre rooted stock with gapps and GFS included.
soupmagnet said:
Flash MoDaCo rom. It's a pre rooted stock with gapps and GFS included.
Click to expand...
Click to collapse
DO you think this is the best way to go ?........ or should I go ahead with the only 6.3 root guide I have seen here on this site. (pooky900 guide or something sorry forgot his name) Or do you think it best to wait for a easier newer 6.3 rooter to show up ?? Just your thoughts .... I am not holding you to anything here :O)
Thanks
Thibor69 said:
DO you think this is the best way to go ?........ or should I go ahead with the only 6.3 root guide I have seen here on this site. (pooky900 guide or something sorry forgot his name) Or do you think it best to wait for a easier newer 6.3 rooter to show up ?? Just your thoughts .... I am not holding you to anything here :O)
Thanks
Click to expand...
Click to collapse
I've tried to explain much of this a couple of times now, so here's my final attempt...
The generally accepted procedure for rooting or installing a ROM:
1) Get to fastboot mode by utilizing either...
a) a factory cable
b) fbmode
2) Install recovery and custom bootloader
3) Either root by installing su and Superuser.apk or flash a custom ROM
To get back to 6.2, you will still have to do #1 & #2 and flash the 6.2 zip package like you would any other ROM. Amazon's software will not allow you to downgrade the software through stock so you can use the BurritoRoot exploit.
It's not likely for someone to come up with a newer/easier method for rooting 6.3 because...
a) It's pretty straightforward as it is
b) No one spends the time to do it when the old way works perfectly well
I've laid out the procedure in excruciating detail here...
http://forum.xda-developers.com/showthread.php?t=1638452
I invite you to keep exploring easier ways to do this, so I can make the how-to above simpler and shorter, but I doubt you will find one. Good luck.
MoDaCo comes with 6.3 pre rooted along with gapps and Google Framework Services preinstalled. It is by far the easiest route to get a rooted stock because the work has already been done for you. All you have to do is flash it in recovery. (Assuming you have recovery installed of course)
Last time I heard, you still have to rename otacerts.zip to prevent any OTA updates screwing up everything but I'm not 100% on that. You should definitely look into it, though. People here are pretty good at staying on top of the latest updates and making flashable versions that won't undo everything you have so far (i.e. break root, uninstall recovery, etc.)
Pokey9000's rooting method is very effective and good if you want to learn but unnecessary IMO if you just want a rooted stock that works well. But I think you should definitely have fbmode on your device if you are using Windows. It could come in very handy when your drivers are being stupid.
It should be noted that I don't use stock and never have so I couldn't tell you much about the differences between MoDaCo and straight rooted, as in whether or not you can watch Prime Video with it, but there are plenty of stock users here that can help you sort it out.
Thibor69 said:
I bought a new KF and it has 6.3 on it. I would like to root via BuritooRoot3 but I need 6.2 to run his app. Is there any way to take a stock 6.3 KF and get it back to a stock 6.2 ???
Thanks !
Click to expand...
Click to collapse
Kindle Fire Utility .95 works easily on 6.3 and while it's not BurritoRoot it is still a simple one click root utility with a lot of features to make the rooting process easy. Any particular reason you want Burrito?
soupmagnet said:
MoDaCo comes with 6.3 pre rooted along with gapps and Google Framework Services preinstalled. It is by far the easiest route to get a rooted stock because the work has already been done for you. All you have to do is flash it in recovery. (Assuming you have recovery installed of course)
Last time I heard, you still have to rename otacerts.zip to prevent any OTA updates screwing up everything but I'm not 100% on that. You should definitely look into it, though. People here are pretty good at staying on top of the latest updates and making flashable versions that won't undo everything you have so far (i.e. break root, uninstall recovery, etc.)
Pokey9000's rooting method is very effective and good if you want to learn but unnecessary IMO if you just want a rooted stock that works well. But I think you should definitely have fbmode on your device if you are using Windows. It could come in very handy when your drivers are being stupid.
It should be noted that I don't use stock and never have so I couldn't tell you much about the differences between MoDaCo and straight rooted, as in whether or not you can watch Prime Video with it, but there are plenty of stock users here that can help you sort it out.
Click to expand...
Click to collapse
Just so everybody is on the same page and because I've done more rooting experiments the last few days than I care to admit.
Thibor69 said in another one of his threads that he wants to go to the Hellfire ROM. He's not interested in rooted stock, as far as I can tell. I agree though... I don't know why someone would take the time to root when MoDaCo seems to have done all the heavy lifting already. MoDaCo users also say that they can use some app (the name escapes me at the moment) that switches root on and off so they can watch videos.
pokey9000 doesn't have a rooting method. He has a fastboot exploit that is being used to root 6.3.x in a guide originally written by jcase. For 6.2.x, the rooting method was to use the BurritoRoot exploit to gain root and then get to fastboot mode by using idme. Amazon closed that hole so BurritoRoot can no longer be used for 6.3.x. Because jcase wasn't interested in building another root exploit, he published that guide as an alternative. The rooting method for 6.3.x is to use pokey9000's fbmode to get to fastboot and then install su privileges through TWRP... so, the process has been reversed... su -> fastboot for 6.2.x and now fastboot -> su for 6.3.x. So, you still have to use pokey9000's fbmode to get to fastboot and install a recovery (and bootloader) if you want to install any ROM.
Laquox said:
Kindle Fire Utility .95 works easily on 6.3 and while it's not BurritoRoot it is still a simple one click root utility with a lot of features to make the rooting process easy. Any particular reason you want Burrito?
Click to expand...
Click to collapse
KFU is broken for whatever reason. It does get you su, but doesn't install the Superuser.apk... I don't know why and I'm not interested in debugging it. I'm not sure if sideloading Superuser.apk is the only thing that needs to be done after its "rooting" process, but it also installs the old versions of FFF and TWRP. That causes headaches all around for people that don't know their way around the bootloader and recovery. Otherwise, it's great!
KFU uses the same fbmode exploit that I've outlined in my guide, so the process is essentially identical. If you follow along with what I have there, you'll get all the current software and a working Superuser. If you use KFU, you can go back and reinstall all the stuff I mentioned above.
kinfauns said:
...
Click to expand...
Click to collapse
Yeah, sorry about that. I was replying to his post and you beat me to the punch.
So, yeah...what kinfauns said
Thibor69 said:
I bought a new KF and it has 6.3 on it. I would like to root via BuritooRoot3 but I need 6.2 to run his app. Is there any way to take a stock 6.3 KF and get it back to a stock 6.2 ???
Thanks !
Click to expand...
Click to collapse
You can use the Kindle Fire Utility 0.9.5
That's what I used to root my Kindle on 6.3
You just have to sideload the superuser.apk file though
kinfauns said:
Thibor69 said in another one of his threads that he wants to go to the Hellfire ROM. He's not interested in rooted stock, as far as I can tell.
Click to expand...
Click to collapse
.....Yes that is what I want to do. I don't care about stock at all.
kinfauns said:
I agree though... I don't know why someone would take the time to root when MoDaCo seems to have done all the heavy lifting already. MoDaCo users also say that they can use some app (the name escapes me at the moment) that switches root on and off so they can watch videos.
Click to expand...
Click to collapse
.....I hear what you are saying. Since I don't care about amazon video's, I see no reason to keep any aspects of stock at all .... so I guess I should skip MoDaCo's method also ... right ?
kinfauns said:
pokey9000 doesn't have a rooting method. He has a fastboot exploit that is being used to root 6.3.x in a guide originally written by jcase. Because jcase wasn't interested in building another root exploit, he published that guide as an alternative. The rooting method for 6.3.x is to use pokey9000's fbmode to get to fastboot and then install su privileges through TWRP... So, you still have to use pokey9000's fbmode to get to fastboot and install a recovery (and bootloader) if you want to install any ROM.
Click to expand...
Click to collapse
.....Ok I understand. My question tho would be after I get to fastboot, you said to install a recovery and bootloader. Isn't TWRP the recovery method ? and which bootloader do I install ? And I do this all from within fastboot ? Also, what about FFF ? were does that come into play.
kinfauns said:
KFU uses the same fbmode exploit that I've outlined in my guide, so the process is essentially identical. If you follow along with what I have there, you'll get all the current software and a working Superuser. If you use KFU, you can go back and reinstall all the stuff I mentioned above.
Click to expand...
Click to collapse
But you mentioned that KFU is broken ... so I guess I should just follow your method.
ONE LAST NOTE: Were are the drivers for Kindle Fire. I plug into PC (win7) and it doesn't find driver for kindle, but I still have access to the internal somehow ..
I am ready to start this process now .... but I want to be 100% sure I have a recovery image in case I soft-brick somehow.
You guys are great ... and thank you for helping me !!!
Cheers
Thibor69 said:
I hear what you are saying. Since I don't care about amazon video's, I see no reason to keep any aspects of stock at all .... so I guess I should skip MoDaCo's method also ... right ?
Click to expand...
Click to collapse
Right, sort of. Any custom rom you flash will be rooted, but you need recovery to flash it.
.....Ok I understand. My question tho would be after I get to fastboot, you said to install a recovery and bootloader. Isn't TWRP the recovery method ? and which bootloader do I install ? And I do this all from within fastboot ? Also, what about FFF ? were does that come into play.
Click to expand...
Click to collapse
TWRP is the preferred recovery. You can install the latest bootloader from within recovery... http://forum.xda-developers.com/showthread.php?p=25598837 ...and use fastboot to change to recovery bootmode
But you mentioned that KFU is broken ... so I guess I should just follow your method.
ONE LAST NOTE: Were are the drivers for Kindle Fire. I plug into PC (win7) and it doesn't find driver for kindle, but I still have access to the internal somehow ..
Click to expand...
Click to collapse
The drivers for the KF can be found in the KFU folder along with an installation batch file.
Ok so to sum it up:
1) install kindle drivers, be sure PC see's Kindle and be sure adb is working
2) install TWRP
3) install latest bootloader (via link below)
4) then flash ROM ?
Cheers
soupmagnet said:
Right, sort of. Any custom rom you flash will be rooted, but you need recovery to flash it.
TWRP is the preferred recovery. You can install the latest bootloader from within recovery... http://forum.xda-developers.com/showthread.php?p=25598837 ...and use fastboot to change to recovery bootmode
The drivers for the KF can be found in the KFU folder along with an installation batch file.
Click to expand...
Click to collapse
Sounds about right. There's a possibility you may need to fix your drivers again at some point in the process. If for some reason you can't get fastboot to connect:
http://forum.xda-developers.com/showthread.php?t=1625356
&
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
soupmagnet said:
Sounds about right. There's a possibility you may need to fix your drivers again at some point in the process. If for some reason you can't get fastboot to connect:
http://forum.xda-developers.com/showthread.php?t=1625356
&
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
Click to expand...
Click to collapse
Many thanks !
I want to root my 8.9.
I have prepared everything to root it with the KFFirst Aide method. Before I want to start, my Kindle have updatet to 8.4.1.
Do the KFFFirstAide method work on 8.4.1?
I`have all the necessary data already downloaded and adb and fastboot works with option 16.
Can I start the root process without probelms with this method?
I want to install playsore and perhaps later twrp recovery.
Stefan
Rooting Fire HD 8.9 on 8.4.1
stefan1155 said:
I want to root my 8.9.
I have prepared everything to root it with the KFFirst Aide method. Before I want to start, my Kindle have updatet to 8.4.1.
Do the KFFFirstAide method work on 8.4.1?
I`have all the necessary data already downloaded and adb and fastboot works with option 16.
Can I start the root process without probelms with this method?
I want to install playsore and perhaps later twrp recovery.
Stefan
Click to expand...
Click to collapse
I can't answer the question regarding the KFFirst Aide rooting utility but I can tell you that using the Bin4ry tool on 8.4.1 does work. I'm now looking for a method to install TWRP 2.4.4 in conjunction with 8.4.1. If you have any ideas let us know.
rebelduke said:
I can't answer the question regarding the KFFirst Aide rooting utility but I can tell you that using the Bin4ry tool on 8.4.1 does work. I'm now looking for a method to install TWRP 2.4.4 in conjunction with 8.4.1. If you have any ideas let us know.
Click to expand...
Click to collapse
now it has been updatet to 8.4.3
i don`t know how to root...
shall i try bin4ry tool?
greets stefan
stefan1155 said:
now it has been updatet to 8.4.3
i don`t know how to root...
shall i try bin4ry tool?
greets stefan
Click to expand...
Click to collapse
I also was OTA upgraded to 8.4.3. However, I did not lose root or the Google Play Store download/install capability. Bin4ry ver. 30 worked for me to root 8.4.1 and as I've stated, I did not lose root after being upgraded to 8.4.3.
Could someone please post the link to the thread on the latest Binary root method for Kindle Fire HD 8.9. Thanks
FraDiavalo said:
Could someone please post the link to the thread on the latest Binary root method for Kindle Fire HD 8.9. Thanks
Click to expand...
Click to collapse
hi!
link to Binary
I strongly recommend soupkit, a Linux-live-system based installer. After installing it on a usb stick and booting from the stick you have everythink perfectly set up. I rooted with Soupkit in < 30 min!
Soupkit
For those rooting for the first time, I just rooted my KF HD 8.9 with the Root Many method:
http://forum.xda-developers.com/showthread.php?t=1886460
The Qemu root method did not work for me. I did make sure to install and test the ADB drivers first. I rooted both 8.4.3 and 8.4.1. I was OTA updated right after rooting 8.4.1 I intend to prevent any more OTA updates with Droidwall.
I tried doing the SoupKit method but I'm having trouble with the ADB. Rootplus couldn't detect any ADB in the folder even though it's there. As for the Binary method, I tried doing it for several hours yesterday but I can't get it to work. What should be the first steps before I use the Binary root program? Sorry, but I'm really such a noob at this. My Kindle btw is 8.9 version 8.4.3
FraDiavalo said:
I tried doing the SoupKit method but I'm having trouble with the ADB. Rootplus couldn't detect any ADB in the folder even though it's there. As for the Binary method, I tried doing it for several hours yesterday but I can't get it to work. What should be the first steps before I use the Binary root program? Sorry, but I'm really such a noob at this. My Kindle btw is 8.9 version 8.4.3
Click to expand...
Click to collapse
Qemu root did work for me with 8.4.3
KFF will root both 8.4.1 and 8.4.3.
FraDiavalo said:
I tried doing the SoupKit method but I'm having trouble with the ADB. Rootplus couldn't detect any ADB in the folder even though it's there. As for the Binary method, I tried doing it for several hours yesterday but I can't get it to work. What should be the first steps before I use the Binary root program? Sorry, but I'm really such a noob at this. My Kindle btw is 8.9 version 8.4.3
Click to expand...
Click to collapse
the binaries provided by soupkit are for 32 Bit. Maybe you used a 64 Bit Linux installation? (Tried 64 Bit at first and it did not work, with 32 Bit it worked like a charm)
Finally got my Kindle rooted. I used the Soupkit method using Ubuntu 32 bit. Thanks everyone.
Hello
I was just wondering - if it is possible to upgrade my Rooted Firetv (51.1.1.0) to the new software with a custom Rom via ADB 1.14 software
if Yes, maybe anyone could explain to med how that is done ?
THX
jakepe said:
Hello
I was just wondering - if it is possible to upgrade my Rooted Firetv (51.1.1.0) to the new software with a custom Rom via ADB 1.14 software
if Yes, maybe anyone could explain to med how that is done ?
THX
Click to expand...
Click to collapse
You need to downgrade first, install ClockworkMod Custom Recovery and only then you can upgrade
Thanks for your answer - after i have downgraded - how can i then use ADB fire to install the Clockwordmode and then upgrade ?
No way. Follow the guides here: http://www.aftvnews.com/tag/guide/
jmerrilljr2 said:
No way. Follow the guides here: http://www.aftvnews.com/tag/guide/
Click to expand...
Click to collapse
More specifically, follow the AFTVnews Fire TV & Fire TV Stick Rooting Starters Guide guide.
All of the threads that I have read are using Windows and are using a Kindle Fire version earlier than 6.3.4. None use Ubuntu. Also, that thing about getting into USB debugging doesn't seem to work with this version. Can anyone please help me. I would also like to know how to get TWRP installed and flash a custom rom onto the Kindle.
AK_1stgen said:
All of the threads that I have read are using Windows and are using a Kindle Fire version earlier than 6.3.4. None use Ubuntu. Also, that thing about getting into USB debugging doesn't seem to work with this version. Can anyone please help me. I would also like to know how to get TWRP installed and flash a custom rom onto the Kindle.
Click to expand...
Click to collapse
saferoot works with Linux
[How To][Root] Kindle Fire 1 update 6.3.4 [2014]
Hello guys,
I have kindle fire hd 8.9 2gen.
Want to install custom android, but at first need to root and unlock bootloader.
Is there any guideline? I can't find.
Thanks.
arshileus said:
Hello guys,
I have kindle fire hd 8.9 2gen.
Want to install custom android, but at first need to root and unlock bootloader.
Is there any guideline? I can't find.
Thanks.
Click to expand...
Click to collapse
You can follow my guide here. Kingroot should work.