Related
I was thinking about buying one of these.
Does anyone else have one? Are they an good?
I have just a basic usb to 3.5 headphone adapter, and I use iPod headphones.
Sounds great to me.
phuKKah said:
I have just a basic usb to 3.5 headphone adapter, and I use iPod headphones.
Sounds great to me.
Click to expand...
Click to collapse
Yea, I bought those and they are being shipped to me right now.
But I think that the stereo bluetooth adapter seems pretty convenient, no?
If HTC shipped a bluetooth adapter like this, I wouldn't complain about the lack of a 3.5mm headphone jack
Or you could just get stereo BT headphones and forget the wires and adapters!
phatmanxxl said:
Or you could just get stereo BT headphones and forget the wires and adapters!
Click to expand...
Click to collapse
No stereo bluetooth headphones can compare to my Shure earbuds.
Plus I think that most stereo bluetooth headphones are clunky.
Do you have a nice pair though? any recomendations?
I got one from ebay as well. I paid less than that, but it's still the same. They all are manufactured in China. I use mine everyday. Good sound quality, works right out of the box. I haven't really had any problems.
I only have two complaints. 1. You cant use them while charging, as the charger shown in the third picture is plugged into the headphone port. Strange, yes but it works. That is not really that much a problem, because it has great battery life! 2. No matter what I do, I cannot connect it to my computer to stream music from my computer to the A2d2p adapter. (or whatever it's called, lol) If you come up with a solution after you get yours, please post, or email me.
For me, price was an issue. I didn't want to spend a whole lot of money to listen to music from my phone, but I wanted good sound quality. Regular Bluetooth Stereo Headphones are expensive. For me, this was the way to go. I bought this and a pair of Sony wrap around headphones, and I am rockin'. I think you will be pleased.
**edit**
PS - I have attached the manual I got from a Chinese Suppliers site, as one doesn't come with it. At least not with mine. (Maybe thats why I got mine cheaper, lol)
PSS - And you know they are not only headphone adapters, but can be used for calls as well. It is kind of awkward to hold the adapter up to talk to someone, but I usually just clip it on my lapel. OK, done editing now.
skyline247 said:
I got one from ebay as well. I paid less than that, but it's still the same. They all are manufactured in China. I use mine everyday. Good sound quality, works right out of the box. I haven't really had any problems.
I only have two complaints. 1. You cant use them while charging, as the charger shown in the third picture is plugged into the headphone port. Strange, yes but it works. That is not really that much a problem, because it has great battery life! 2. No matter what I do, I cannot connect it to my computer to stream music from my computer to the A2d2p adapter. (or whatever it's called, lol) If you come up with a solution after you get yours, please post, or email me.
For me, price was an issue. I didn't want to spend a whole lot of money to listen to music from my phone, but I wanted good sound quality. Regular Bluetooth Stereo Headphones are expensive. For me, this was the way to go. I bought this and a pair of Sony wrap around headphones, and I am rockin'. I think you will be pleased.
**edit**
PS - I have attached the manual I got from a Chinese Suppliers site, as one doesn't come with it. At least not with mine. (Maybe thats why I got mine cheaper, lol)
PSS - And you know they are not only headphone adapters, but can be used for calls as well. It is kind of awkward to hold the adapter up to talk to someone, but I usually just clip it on my lapel. OK, done editing now.
Click to expand...
Click to collapse
Nice! Thank you for the information!
I think I'm going to get one, I just have to be careful because most of the ones they are selling on Ebay only have UK outlet plugins. I live in the US, and it looks like you do too by the picture of your plug.
I have these:
http://www.amazon.com/Sony-DRBT21G-...?ie=UTF8&s=electronics&qid=1246133334&sr=8-29
Great sound, comfy and durable as hell.
But I think im going to try out these next as I want something smaller and lighter, Im still shoppin though for a newer pair:
http://www.amazon.com/Plantronics-V..._1_6?ie=UTF8&s=wireless&qid=1246133213&sr=8-6
phatmanxxl said:
I have these:
http://www.amazon.com/Sony-DRBT21G-...?ie=UTF8&s=electronics&qid=1246133334&sr=8-29
Great sound, comfy and durable as hell.
But I think im going to try out these next as I want something smaller and lighter, Im still shoppin though for a newer pair:
http://www.amazon.com/Plantronics-V..._1_6?ie=UTF8&s=wireless&qid=1246133213&sr=8-6
Click to expand...
Click to collapse
Cool dude. The Voyager ones look nice, but I think I'm gonna go the cheap route and just get the converter.
I have one of these:
http://www.sonyericsson.com/cws/products/accessories/overview/hbh-ds200?cc=CA&lc=en
It's a Sony Ericsson DS-200 which I bought last year specifically so I could plug some decent headphones in!
I think it was fairly expensive - about £50 when I bought it, but it has worked great with anything that I've wanted to pair with it, including my Excalibur.
But it's far better than using a wired headset with a 3.5 jack in my opinion, because if you use "proper" earphones that come with a long-ish cord then combine that with the long-ish cord from the wired headset then it makes for some nightmareish tangles! Using A2DP seems like freedom in comparison!
Highly recommended
jeonatl3 said:
I have one of these:
http://www.sonyericsson.com/cws/products/accessories/overview/hbh-ds200?cc=CA&lc=en
It's a Sony Ericsson DS-200 which I bought last year specifically so I could plug some decent headphones in!
I think it was fairly expensive - about £50 when I bought it, but it has worked great with anything that I've wanted to pair with it, including my Excalibur.
But it's far better than using a wired headset with a 3.5 jack in my opinion, because if you use "proper" earphones that come with a long-ish cord then combine that with the long-ish cord from the wired headset then it makes for some nightmareish tangles! Using A2DP seems like freedom in comparison!
Highly recommended
Click to expand...
Click to collapse
Wow, I didn't even know that Sony had a product like this.
Thank you for showing me it
jeonatl3 said:
I have one of these:
http://www.sonyericsson.com/cws/products/accessories/overview/hbh-ds200?cc=CA&lc=en
It's a Sony Ericsson DS-200 which I bought last year specifically so I could plug some decent headphones in!
I think it was fairly expensive - about £50 when I bought it, but it has worked great with anything that I've wanted to pair with it, including my Excalibur.
But it's far better than using a wired headset with a 3.5 jack in my opinion, because if you use "proper" earphones that come with a long-ish cord then combine that with the long-ish cord from the wired headset then it makes for some nightmareish tangles! Using A2DP seems like freedom in comparison!
Highly recommended
Click to expand...
Click to collapse
Lol about the longish cord, gave up on wired headsets as the ammont of times i'd rip the cord when cycling, i'm using STAK semi enclosed cans made for 3 network they were cheap bout £30 and give loud playback with comfortability and like post above a2dp makes listening to music far more enjoyable skippin tracks in an instant answering calls in an instant...
BT is the deffenat way to go
Then cap it off with PocketPlayer....
stylez said:
Lol about the longish cord, gave up on wired headsets as the ammont of times i'd rip the cord when cycling, i'm using STAK semi enclosed cans made for 3 network they were cheap bout £30 and give loud playback with comfortability and like post above a2dp makes listening to music far more enjoyable skippin tracks in an instant answering calls in an instant...
BT is the deffenat way to go
Then cap it off with PocketPlayer....
Click to expand...
Click to collapse
I'm using Sennheiser CX300, not audiophile grade by any means but certainly better than bundled headphones or stuff like that, they're great.
I love impressing people on the bus by hiding the A2DP receiver in a pocket and then watching a movie or something on my phone, I've had a few people who were watching over my shoulder anyway ask me how I was listening to the sound! Hehe
I would like to be able to connect my Evo to my car so that I can listen to Pandora using the car stereo. Unfortunately my car only has an Ipod dock connector.
Would it be possible to create an adapter that will allow you to connect an HTC Evo to an Ipod dock and output audio?
I have seen something similar being done with a T-Mobile G1.
webnetta.com/2008/12/27/hack-connects-t-mobile-g1-to-ipod-dock/
Is it just as simple as getting a Ipod dock extender cable like this one:
monoprice.com/products/product.asp?c_id=108&cp_id=10831&cs_id=1083101&p_id=6828
and cutting off the male and of this cable and soldering it to a male end of microusb cable?
Any help would be appreciated.
this is a huge area where android needs improvement.
There's no audio through the Evo USB port. I was searching for the same thing last night. I have a logitech ipod speaker: (can't post links)
I also have this ipod bluetooth adapter:
What I'm thinking about doing is to hardwire the bluetooth adapter to the inside of the speaker. Then get the 5v from the dock and make a cable or adapter to go to the Evo's mini usb port. It's not the best solution, but I do have all of the parts already. If I didn't, headphones would suffice.
find the schematic for the ipod dock and solder a headphone jack to the audio inputs on the connector and you're done. I have done the same thing and it worked just fine for my friend that I did it for.
the thing that sucks about that is you will need an extra cable to charge the phone.
speedracerbubba said:
find the schematic for the ipod dock and solder a headphone jack to the audio inputs on the connector and you're done. I have done the same thing and it worked just fine for my friend that I did it for.
the thing that sucks about that is you will need an extra cable to charge the phone.
Click to expand...
Click to collapse
Hence my bluetooth idea.
I did some digging around a couple weeks ago and came across this
talkandroid.com/guides/ipod-dock-adapter-for-motorola-droidmilestone/
It sucks you need the 3.5 adapter, but better than letting letting a perfectly good dock sit and collect dust.
Sent from my PC36100 using XDA App
I just ordered a couple of these last week. My car has an ipod adapter, and this should let me connect to that and connect the 3mm to my EVO.
It's coming from Hong Kong so may be a bit longer before it's delivered. I'll report back when I get it.
I can't post links yet - go to bestofferbuy.com and search
"3.5mm Male to iPod/iPhone 2G/3G/3GS Female Adapter Cable - Black (95CM-Length)"
It's $2.60 shipped so I bought two. Can't go wrong for 5bucks
oooo ^ good find. picked up two myself.
I've been using one of these in my car for about 6 months now, originally it was to have audio from netbook. It has now been doing me good on the evo.
*correct the link and bingo... Cant post the real link because of my noobness
w w w.cablejive.com/products/Dock-Input-Cable.html
I had the same problem, I think the best solution is to go Bluetooth. This will future proof you for phone changes down the line as well. Long story short, here is the best solution I've found and it works great! Just connect it to your ipod cable and stream over Bluetooth. So far it has worked with everything ipod, iPhone and iPad that I own, especially my custom installed iPhone stereo connector.
Just look up item number 190402178083 on eBay.
Sent from my EVO 4G using XDA App
Step 1: Buy some Sugru or ShapeLock
Step 2: Buy Cheapie $1 headphones
Step 3: Buy iPod female Dock connector and MicroUSB Male end
Step 4: Use Pinout.ru to connect the points appropriately (iPod dock connector pins are pretty small and you must work quickly or your will melt the plastic, do not forget the internal resistors if needed for your application)
Step 5: Wrap it up in Sugru or Shapelock (use hairdryer to smooth it out with your hands)
Step 6: Paint and Enjoy!
Creating custom cables and docks and such is really not that difficult, just need some decent soldering skill and patience.
You could also just buy this:
http://www.cablejive.com/universal-dock-converter
FIPO Bluetooth
I use this in my BMW for streaming over the bluetooth to the stereo. Works great and convient to just start the car and the Evo start playing music/podcast/etc.
FIPO Amazon Sprint search will turn up the 20 dollar adapter.
Childofthehorn said:
Creating custom cables and docks and such is really not that difficult, just need some decent soldering skill and patience.
http://www.cablejive.com/universal-dock-converter
Click to expand...
Click to collapse
Some of us do have the necessary skills, but do not want a ugly wire staring us in the face. Also the components themselves tend to get expensive when ripping apart 3 different cords for parts... not to mention when someone tries this and melts something, then you have to go through the hassle of ordering more components. That is the main reason we come here, because someone may already be on the job.
Now..... if your offering to do it, and you have a pricetag and are willing to offer support in case it doesn't work or kills our phones or car stereos, then I am all ears. But definitely thanks for the link.
As far as BT goes, the one poster is kind of right, I think the phone industry is betting on bluetooth, although its been 15 years, and BT performance is still at best Mediocre.
00-Photon said:
I had the same problem, I think the best solution is to go Bluetooth. This will future proof you for phone changes down the line as well. Long story short, here is the best solution I've found and it works great! Just connect it to your ipod cable and stream over Bluetooth. So far it has worked with everything ipod, iPhone and iPad that I own, especially my custom installed iPhone stereo connector.
Just look up item number 190402178083 on eBay.
Sent from my EVO 4G using XDA App
Click to expand...
Click to collapse
now that is sweet! best solution yet!
What if we took audio out from the HDMI port?
Brutal-Force said:
Also the components themselves tend to get expensive when ripping apart 3 different cords for parts... not to mention when someone tries this and melts something, then you have to go through the hassle of ordering more components.
Click to expand...
Click to collapse
True, But there are those of us with drive to do something unique and have something that fits our needs exactly. DealExtreme.com is a great place to buy the cables to be ripped up and dollar stores can be a real treasure trove. Craft/ART stores also have a lot of things which can be easily repurposed.
Brutal-Force said:
Now..... if your offering to do it, and you have a pricetag and are willing to offer support in case it doesn't work or kills our phones or car stereos, then I am all ears.
Click to expand...
Click to collapse
I used to be a person who did his kind of work in college, but it is time consuming and repetitive. Plus, this is likely a market of people who are not willing to spend great amounts of money on handmade products. Even if someone charged $30 each it would not be worth the average techies time, but a worthwhile effort for a high school or college student with the drive to learn and perfect.
Brutal-Force said:
As far as BT goes, the one poster is kind of right, I think the phone industry is betting on bluetooth, although its been 15 years, and BT performance is still at best Mediocre.
Click to expand...
Click to collapse
You are correct in MOST scenarios!
It is more of an issue not with the BT technology itself rather the way it is popularly implemented. BT does have the ability to send out very high quality audio streams and many of which are nearly lossless in quality. The issues are with the device that streams and the device that receives. The chosen connection type between the two devices must be mutual. Problem is that most BT devices streaming A2DP use only SBC coding of varied bit rate and quality.
Now if you have a really well done setup that is very thought out you can have your EVO sending out a pure 320kbps MP3 or AAC or other compatible stream direct with no conversion being done in real time to a BT receiver which is MP3, etc. stream compatible and has an excellent, typically non-chip integrated, DAC with a nice buffered output. Problem is that many BT receiver chips are made to be as cheap as possible, have crappy dacs, and push out very little power (or simply have no buffer at all) to even crappier speakers. When you combine that with real time conversion of MP3 and other formats to SBC at an even lower bit rate, you have an even worse experience.
IMO, the headphone output on the EVO does not sound that good and if you have a car that does accept MP3 320k BT streams and you use an alternative media player like meridian that allows that kind of behavior, then it should be fine for even above average car audio.
Have a Great Listening Experience!
JoeBass said:
I just ordered a couple of these last week. My car has an ipod adapter, and this should let me connect to that and connect the 3mm to my EVO.
It's coming from Hong Kong so may be a bit longer before it's delivered. I'll report back when I get it.
I can't post links yet - go to bestofferbuy.com and search
"3.5mm Male to iPod/iPhone 2G/3G/3GS Female Adapter Cable - Black (95CM-Length)"
It's $2.60 shipped so I bought two. Can't go wrong for 5bucks
Click to expand...
Click to collapse
Great find! Just ordered one for myself
Childofthehorn said:
True, But there are those of us with drive to do something unique and have something that fits our needs exactly. DealExtreme.com is a great place to buy the cables to be ripped up and dollar stores can be a real treasure trove. Craft/ART stores also have a lot of things which can be easily repurposed.
I used to be a person who did his kind of work in college, but it is time consuming and repetitive. Plus, this is likely a market of people who are not willing to spend great amounts of money on handmade products. Even if someone charged $30 each it would not be worth the average techies time, but a worthwhile effort for a high school or college student with the drive to learn and perfect.
You are correct in MOST scenarios!
It is more of an issue not with the BT technology itself rather the way it is popularly implemented. BT does have the ability to send out very high quality audio streams and many of which are nearly lossless in quality. The issues are with the device that streams and the device that receives. The chosen connection type between the two devices must be mutual. Problem is that most BT devices streaming A2DP use only SBC coding of varied bit rate and quality.
Now if you have a really well done setup that is very thought out you can have your EVO sending out a pure 320kbps MP3 or AAC or other compatible stream direct with no conversion being done in real time to a BT receiver which is MP3, etc. stream compatible and has an excellent, typically non-chip integrated, DAC with a nice buffered output. Problem is that many BT receiver chips are made to be as cheap as possible, have crappy dacs, and push out very little power (or simply have no buffer at all) to even crappier speakers. When you combine that with real time conversion of MP3 and other formats to SBC at an even lower bit rate, you have an even worse experience.
IMO, the headphone output on the EVO does not sound that good and if you have a car that does accept MP3 320k BT streams and you use an alternative media player like meridian that allows that kind of behavior, then it should be fine for even above average car audio.
Have a Great Listening Experience!
Click to expand...
Click to collapse
Well, that was a mouthfull. Thanks though, it helps a little. I did spend quite a while researching different Bluetooth headsets. But alas, as you have pointed out, although most of what is considered to be high end headsets, still only use bluetooth 2.0. The EVO also doesn't do a very good job at streaming bluetooth. Pandora and Music Player skip horribly. I was not aware that Meridian did a better job. I guess, that might have been another option.
As far as the bluetooth headsets go though, if your looking for A2DP, the selection is still limited, unless you want a dongle type headset, which IMO, you might as well use a wire. The Motorola, Rocketfish and Jabra headsets of top end just don't do as good a job as seating properly, unless you spend 50+ dollars on a custom ear piece.
There really are a lot of trade-offs in audio performance, but a good set high quality ear buds or headphones are hard to beat. Then comes the Car audio as well as home audio into play. I use mine as a MP3 player both on the go and in the car. My car has a Audio In jack, so I am happy with that.
I ordered a E5 Amplifier to go with mine, it should be here in a week or two. While my headset has finally broken in, I could do with about 10-20% more volume, but I am hoping for a little improved base since it will have the power to push my Vmoda Remix.
Brutal-Force said:
Well, that was a mouthful....
The Motorola, Rocketfish and Jabra headsets of top end just don't do as good a job as seating properly, unless you spend 50+ dollars on a custom ear piece.
There really are a lot of trade-offs in audio performance, but a good set high quality ear buds or headphones are hard to beat.
I ordered a E5 Amplifier to go with mine, it should be here in a week or two. While my headset has finally broken in, I could do with about 10-20% more volume, but I am hoping for a little improved base since it will have the power to push my Vmoda Remix.
Click to expand...
Click to collapse
Yeah, The E5 is a decent beginner set. You may want to look at building a CMoy at some point, make sure to use slightly larger electrolytic caps and good film caps (resistors don't matter as much). If you make one with good parts and socketed chip, you can roll in to your flavor and it will take portable amps that are $100 or more to beat it. As far as kit amps go, its hard to beat a Mini3 for $100 to put together yourself.
I only say this as a person who actually owns a $450 Portable Amp and $575 Custom triple driver In-ear's. Don't even get me started about the stuff that is at home (I have way too much audio crap!)
BTW - you can make your own custom silicone ear pieces by using some Sugru or if you know an audiologist, you can get some of the Westone two part silicone that they normally use for getting impressions. As with everything, be careful and YMMV.
I wish i had the time to work on getting a USB host for the EVO so that we could use external USB DAC's (like the very small alien and grub).
00-Photon said:
I had the same problem, I think the best solution is to go Bluetooth. This will future proof you for phone changes down the line as well. Long story short, here is the best solution I've found and it works great! Just connect it to your ipod cable and stream over Bluetooth. So far it has worked with everything ipod, iPhone and iPad that I own, especially my custom installed iPhone stereo connector.
Just look up item number 190402178083 on eBay.
Sent from my EVO 4G using XDA App
Click to expand...
Click to collapse
Just ordered this too. The cable I ordered from Bestofferbuy . c o m was backordered, so I canceled. I agree with you, this should do the trick, saw it on another forum and looks like it will also allow some steering wheel functionality.
I ordered two through amazon, also found it on geek . com. Searching either with "Sprint Anycom Bluetooth A2DP Reciever" will get you there.
Ive been reading up on some bluetooth speakers an looking to getting either the logitech Z515 or the logitech boombox but none of them have the option to go the reg battery route, i understand that both of these units are rechargeable but i know during the summer im not always gonna be around a plug so wouldn't mind a unit that is rechargeable but still let's you go reg battery if need be, any of you guys know of any good ones would like to go with the same form factor as the two stated above, saw the rocket fish an a few more but don't like that cylinder shape, gonna be connecting it to my nexus so any suggestions?
Would it be possible for our phones to have a FM transmitter so we can wirelessly play music through our car without a cord/attachment? Or does our phone simply not have the software to be able to?
Sent from my SPH-D710 using XDA
I think it's more an issue with hardware, not software.
Luckily, if you search Amazon, there are a lot of cheaper ones you can find that work pretty well. I unfortunately have a car deck that does not have the AUX input (it does allow me to plug my ipod in through the glove compartment though) so I know what you're going through.
Ummmm... Ok?
I also do not have an AUX input, but today I just installed this into my car (the itrips, etc. just didn't do the job) and I am loving it. It wasn't as smooth a install as I would have liked, but the quality is far superior to the wireless ones.
http://www.amazon.com/PAC-IS32-Modulator-Charging-Audio/dp/B004613FCE/ref=sr_1_1?ie=UTF8&qid=1344913514&sr=8-1&keywords=is32
There are many 'Headphone jack' FM transmitters out there.. Most by Belkin, Scosche, Koss, etc will be along the same quality and roughly the same $40ish bucks. There are actually a couple Bluetooth visor-clip handsfree adapters now that have the Bluetooth music profiles and an FM transmitter built in if you dont want an extra dongle hanging out of the phone. I have a Jabra laying around that does that and it worked pretty well.. I used it before I bought a built-in speakerphone kit.
--- Umm seriously, why do I have to wait 5 minutes to edit my own post? That's just stupid.
I bought a belkin for my sister for her birthday and had to return it because the sound is terrible but then I found one at walmart for about $30 in the automotive department and it sounds as crisp as if is connected in an auxiliary jack, it also as a usb port to charge your phone and if I am not mistaken it can mount your phone giving it control, and if you have a well placed light or charging position it would be convenient, it also has slot to mount a regular sd card directly... it has a display with controls and remote control included.
world wide web dot walmart dot com /ip/Scosche-FM-Transmitter/16652629
I bought an install kit like the one posted from amazon. It puts a little ground noise in the speaker, especially if I use the charger simultaneously. It's all strapped in, inside the console, and my six foot cord comes out of a small hole in the back the cd pocket under the radio.
The right way to do it would be to power the modulator directly from the battery, not the radio fuse. And maybe even a power-line filter depending on how the modulator acts. But who has time for that?
So, I've had this idea for a while, and I managed to build a semi-working prototype of them. Basically, I'm looking to convert them into something that can be used both wired and wireless via bluetooth. I know they have a wireless version of these headphones, but I already have the wired ones, and I prefer the look of the wired ones more. My prototype consisted of some cheap BT earbuds that I took the electronics out of and soldered wires from where the earbud speakers were soldered to where the 3.5mm jack was connected (i know that they probably shouldn't be directly on them and should probably have a diode or something to prevent signal from going out the port, but I'm never going to be using the wired and wireless at the same time so not much point, plus, it was a prototype). Anyway, in my attempts to turn it into a more permanent solution inside the cups, I managed to fry the board for the cheap BT earbuds. So the project went on the shelf (figuratively) for a while. Now, I'd like to actually get this done as I'm getting an Android Wear 2.0 device soon. Suggestions on a micro form factor bluetooth audio receiver? Also, another thing is that the headphones themselves use a 1.5V AA battery to power the bass stuff, would it be possible to use the existing battery compartment for powering the chip, perhaps using a similar size Li-Po battery that is 5 volts that is run in series to both the headphones board (down volted to 1.5v) and the BT chip? I'm also looking for some advice on how to control the power to the BT chip without having to open the things up as it requires a screwdriver. button poking through the side of the cup? or a switch under an earmuff? Basically looking for part idea and other suggestions.
It's nice to see someone skullcandys as most headphones that get nodded are the expensive kinds, I like the style and simplicity of Skullcandy so I'll chime in.
Bluetooth: as for the circuitry I haven't been able to find a standalone board for purchase, you could try one of those cheap "make any headphones Bluetooth" adapter and re use the guts. Also I've seen a few that use 16ohm drivers instead of 32 so that could cause issues
Charging: since you're using the crusher amplified one, thats gonna be tricky. From the Bluetooth headphones I've torn apart, they usually have a charging ic that matches the battery's may(i.e. 800mah or so). You might have to make another circuit like a micro USB to a multi battery charger ic but that also poses it's own issues with the bass circuit and the Bluetooth board circuit so it would be a gamble. Kinda makes it seem like you'll need a Bluetooth headphones, with built in haptic feedback as a donor to work.
Switches/buttons: you'll probably have to get crafty with a Dremel and some switches. I've though of doing this and Drew up some plans where I just mount buttons through the plastic and wire it to whatever it needs connection to. I haven't found adequate buttons for this though.
Honestly I hate to say it as I love a good project where you get what you want from making it. But the crusher wireless sound like a better fool proof option.